TCIS-3: Difference between revisions

Latest revision as of 15:55, 3 January 2025

Turbine substation
(1008111030)

Getting started

Starting up

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

This station is fully supported as from AlphaCom version 11.2.3.7

Related Information

@@ Line 1: / Line 1: @@
-{{AEPS}}[[file:TCIS3.PNG|200px|thumb|Turbine substation<br>(100 8111 030)]]
+{{ACEIS}}[[file:TCIS-3newZ.png|200px|thumb|Turbine substation<br>(1008111030)|alt=]]
 ==Getting started==
+* [[Starting Up Turbine Station|Starting up]]
-*[[TCIS Connections|Connecting your Turbine Intercom station]]
-*[[Starting Up Turbine Station|Starting up]]
 ==Configuration==
-The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
+* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
-*[[Turbine Configuration - AlphaCom mode|AlphaCom mode]]
+* [[Adding station to existing system (Edge)|Edge mode]]
-*[[Adding station to existing system (Edge)|Edge mode]]
+* [[SIP Intercom - Web Interface|SIP mode]]
-*[[SIP Intercom Configuration|SIP mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
-*[[IP Station Configuration - Pulse mode|Pulse mode]]
 ==Restore Factory Defaults and Software Upgrade==
@@ Line 17: / Line 14: @@
 *[[TCIS Restore Factory Defaults|Restore Factory Defaults]]
 *[[Turbine Software Upgrade|Upgrade via the station web interface]]
-*[[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
+*[[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
 *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
+*[[:Category:IMX28 Release notes|Software Release Notes]]
 ==Connectors, Indicators and Dimensions==
+* [[Turbine Compact series board connectors|Device Connections]]
-*[[Turbine Compact Board Connectors|Board Connections]]
+* [[TCIS Indication LEDs|Station Indication LEDs]]
-*[[TCIS Indication LEDs|Station Indication LEDs]]
+* [[TCIS Dimensions & Mounting Instructions|Dimensions]]
-*[[TCIS Dimensions & Mounting Instructions|Dimensions]]
 ==Accessories==
@@ Line 38: / Line 35: @@
 ==Related Information==
-*[[Turbine Compact and MRBD]]
+*[[Adding additional relay(s) to a Zenitel IP Device|Adding additional relay(s)]]
 *[http://www.zenitel.com/product/tcis-3 Additional Documentation on Zenitel.com]
 [[Category: Turbine]]