IP Hotline Station - 1008070010: Difference between revisions

Latest revision as of 16:16, 3 January 2025

IP Hotline Station - IPHLS

Getting started

Starting up

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Station specific configuration for the IP Hotline Station:

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Software Requirements

This station is fully supported as from AlphaCom version 11.2.3.11

Additional Information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-{{AEIPS}}
+{{ACEIS}}
-[[File:IP Hotline.PNG|thumb|350px|IP Hotline Station]]
+[[File:IP Hotline.PNG|thumb|150px|IP Hotline Station - IPHLS]]
-==Connections==
-*[[IP Hotline Connections|Intercom connections]]
+==Getting started==
+* [[Starting Up Turbine Station|Starting up]]
 ==Configuration==
-The IP Hotline can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
 * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 * [[Adding station to existing system (Edge)|Edge mode]]
 * [[SIP Intercom - Web Interface|SIP mode]]
-* [[IP Station Configuration - Pulse mode|Pulse mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
 Station specific configuration for the IP Hotline Station:
+* [[Configuration guide for IP Hotline Station (ICX-AlphaCom)|Configuration guide for IP Hotline (ICX-AlphaCom)]]
-*[[Configuration guide for IP Hotline Station - AlphaCom mode|Configuration of IP Hotline Station - AlphaCom mode]]
+* [[Configuration guide for IP Hotline (Edge)]]
-*[[Configuration guide for IP Hotline (Pulse)|Configuration of IP Hotline Station - Pulse and SIP mode]]
+* [[Configuration guide for IP Hotline (SIP)]]
-*[[Configuration guide for IP Hotline (SIP)|Configuration of IP Hotline Station - Pulse and SIP mode]]
 ==Restore Factory Defaults and Software Upgrade==
+* [[TKIS Restore Factory Defaults|Restore Factory Defaults]]
-*[[TKIS Restore Factory Defaults|Restore Factory Defaults]]
+* [[Turbine Software Upgrade|Upgrade via the station web interface]]
-*[[Turbine Software Upgrade|Upgrade via the station web interface]]
+* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
-*[[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
+* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
-*[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
 * [[:Category:IMX28 Release notes|Software Release Notes]]
 ==Connectors, Indicators and Dimensions==
+* [[IP Hotline Connections|Device connections]]
-*[[Turbine Compact Board Connectors|Board Connections]]
+* [[TKIS Indication LEDs|Station Indication LEDs]]
-*[[TKIS Indication LEDs|Station Indication LEDs]]
+* [[IP Hotline station Dimensions & Mounting Instructions|Dimensions]]
-*[[IP Hotline station Dimensions & Mounting Instructions|Dimensions]]
 ==Software Requirements==