EINS-1: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
Typical use cases are: | Typical use cases are: | ||
* Listen-in microphone | * [[Audio_Monitoring_-_Listen_In|Listen-in]] microphone | ||
* [[Scream Alarm]] | |||
* Ambient noise measurement in relation to [[Distributed Automatic Volume Control (DAVC) (SIP)|Automatic Volume Control DAVC]]. | * Ambient noise measurement in relation to [[Distributed Automatic Volume Control (DAVC) (SIP)|Automatic Volume Control DAVC]]. | ||
Latest revision as of 11:03, 21 February 2025
The EINS-1 unit consists of a TKIS-2 kit and an electret microphone encapsulated in an powder coated aluminum housing with IP-65 grade. The unit is powered by PoE.
Typical use cases are:
- Listen-in microphone
- Scream Alarm
- Ambient noise measurement in relation to Automatic Volume Control DAVC.
Getting started
Configuration
The device can operate in different modes. Set the mode according to the server the station should register to.
|
To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server. |
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Software Release Notes
Connectors, Indicators and Dimensions
Software Requirements
This station is fully supported as from AlphaCom version 11.2.3.7