Vandal Resistant intercom - VR3G-1P: Difference between revisions

Latest revision as of 15:34, 10 April 2025

VR3G-1P (1008021015)

3mm (11 gauge) Stainless Steel
Piezo self testing call button
Vandal Resistant Design with IK10
IP66 - Dirt, dust and water resistant
Tamper switch
Anti-ligature design
For mounting in 3 gang backbox.

Getting started

Starting up

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Station specific configuration: Configuration of the VR3G-1P

Button Test

The VR3G-1P intercom features a Self Testing Call Button.

Restore Factory Defaults and Software Upgrade

Due to the Piezo button on this unit, it is not possible to hold down the button as per a regular Turbine device. Therefore, follow the directions for Factory Defaults of the TKIS-2. Restore Factory Defaults
Upgrade via the station web interface
Upgrade using the IMT tool
Automatic Software Upgrade (SIP mode only)
Software Release Notes

Connectors, Mounting and Dimensions

Accessories

3 gang backbox - 1008098300

Software Requirements

This station is fully supported as from AlphaCom version 11.2.3.7

Related Information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-{{AEIS}}[[file:VR3G-1P Front.png|thumb|200px|VR3G-1P (1008021015)]]
+{{ACEIS}}[[file:VR3G-1P Front.png|thumb|200px|VR3G-1P (1008021015)]]
-Vandal Resistant intercom station for mounting in [[Backbox_3_Gang_-_1008098300|3 gang backbox]]
 *3mm (11 gauge) Stainless Steel
 *Piezo self testing call button
-*Tested to IP66 and IK10
+*Vandal Resistant Design with IK10
+*IP66 - Dirt, dust and water resistant
 *Tamper switch
 *Anti-ligature design
+*For mounting in [[Backbox_3_Gang_-_1008098300|3 gang backbox]].
 ==Getting started==
-*[[TCIS Connections|Connecting your Turbine Intercom station]]
 *[[Starting Up Turbine Station|Starting up]]
 ==Configuration==
-The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
-General configuration:
 * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 * [[Adding station to existing system (Edge)|Edge mode]]
 * [[SIP Intercom - Web Interface|SIP mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
-Station specific configuration:
+Station specific configuration: [[Configuration of the VR3G-1 and VR3G-1P|Configuration of the VR3G-1P]]
-* [[Configuration of the VR3G-1 and VR3G-1P|Configuration of the VR3G-1P]]
-* [[Self Testing Call Button (ICX-AlphaCom mode)]]
+== Button Test==
+The VR3G-1P intercom features a Self Testing Call Button.
+*[[Self Testing Call Button (ICX-AlphaCom mode)|Self Testing Call Button when VR3G-1P is used with ICX-AlphaCom]]
+* [[Self Testing Call Button (Zenitel Connect Pro)|Self Testing Call Button when VR3G-1P is used with Zenitel Connect Pro]]
 ==Restore Factory Defaults and Software Upgrade==
-*[[TCIS Restore Factory Defaults|Restore Factory Defaults]]
+*Due to the Piezo button on this unit, it is not possible to hold down the button as per a regular Turbine device.  Therefore, follow the directions for Factory Defaults of the TKIS-2. [[TKIS Restore Factory Defaults|Restore Factory Defaults]]
 *[[Turbine Software Upgrade|Upgrade via the station web interface]]
 *[[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
@@ Line 33: / Line 35: @@
 *[[:Category:IMX28 Release notes|Software Release Notes]]
-==Connectors, Indicators and Dimensions==
+==Connectors, Mounting and Dimensions==
-*[[Turbine Compact Board Connectors|Board Connections]]
+*[[VR3G-1 and VR3G-1P Board Connectors|Board Connections]]
-*[[TCIS Indication LEDs|Station Indication LEDs]]
+*[[VR3G-1(P) Mounting and Dimensions|Mounting and Dimensions]]
-*[[TCIS Dimensions & Mounting Instructions|Dimensions]] MUST BE UPDATED
 ==Accessories==
-* [[Backbox_3_Gang_-_1008098300|3 gang backbox - 1008098300]]
+*[[Backbox_3_Gang_-_1008098300|3 gang backbox - 1008098300]]
 ==Software Requirements==
@@ Line 46: / Line 48: @@
 ==Related Information==
 *[https://www.zenitel.com/product/vandal-resistant-intercom-station-vr3g-1p Additional Documentation on Zenitel.com]
 [[Category: Turbine]]