ELSIR-10C: Difference between revisions

Latest revision as of 11:55, 14 October 2025

This product is replaced by ZIPS-C (1023320011)

Turbine IP Speaker
(1023300010)

Getting started

Starting up

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Restore Factory Defaults and Software Upgrade

The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.

Connectors, Indicators and Dimensions

The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.

Software Requirements

This station is fully supported as from AlphaCom version 11.2.3.7

Related Information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-[[File:IP Ceiling Turbine.PNG|thumb|350px]]
+{{obs|This product is replaced by [[ZIPS-C|ZIPS-C (1023320011)]]}}
+{{ACEIS}}[[File:IP Ceiling Turbine.PNG|thumb|350px|Turbine IP Speaker<br>(1023300010)|alt=]]
+==Getting started==
+* [[Starting Up Turbine Station|Starting up]]
-==Highlights==
+==Configuration==
-* Steel fire dome
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
-* 10W Class D, built-in amplifier
+* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
-* >100 dB SPL
+* [[Adding station to existing system (Edge)|Edge mode]]
-* Ideal for Micro Zone PA and systems that require a limited number of speakers
+* [[SIP Intercom - Web Interface|SIP mode]]
-* Ideal for speakers installed in remote locations, e.g. roads and railways
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
-* Relay output for remote control, e.g. doors, signal lamps, gates
-* Powered from the IP network cable using Power over Ethernet (PoE)
-* Ideal for Building Security, Infrastructure and Industrial projects
-===<u>[[TKIS Connections|InterCom connections]]</u>===
-===<u>[[Turbine Configuration|Configuration]]</u>===
-===Advanced Network Settings===
-* [[SNMP in Turbine|SNMP]]
-* [[IEEE 802.1X|802.1X]]
-* [[Turbine Firewall|Firewall]]
-===Software Upgrade===
-* [[Turbine Software Upgrade]]
-* [[IMT - Software Upgrade]]
-===<u>[[TKIS Indication LEDs|Station Indication LEDs]]</u>===
-===<u>[[TKIS Restore Factory Defaults|Restore Factory Defaults]]</u>===
-===<u>[[Turbine Compact Board Connectors|Board Connections]]</u>===
-===<u>[[TKIS Dimensions & Mounting Instructions]]</u>===
-===<u>[http://www.zenitel.com/product/tkis-2 Additional Documentation on Zenitel.com]</u>===
+==Restore Factory Defaults and Software Upgrade==
+The ELSIR-10C IP Speaker has a Turbine kit [[TKIS-2]] inside.
+*[[TKIS Restore Factory Defaults|Restore Factory Defaults]]
+*[[Turbine Software Upgrade|Upgrade via the station web interface]]
+*[[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
+*[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
+* [[:Category:IMX28 Release notes|Software Release Notes]]
+==Connectors, Indicators and Dimensions==
+The ELSIR-10C IP Speaker has a Turbine kit [[TKIS-2]] inside.
+* [[Turbine Compact series board connectors|Device Connections]]
+*[[TKIS Indication LEDs|Station Indication LEDs]]
+*[[Speaker Dimensions & Mounting Instructions|Dimensions]]
+==Software Requirements==
+This station is fully supported as from AlphaCom version 11.2.3.7
-==Configuration==
+==Related Information==
-See article: [[Turbine Configuration]]
-==Software Upgrade==
-See article: [[Turbine Software Upgrade]]
-==Reset to factory settings==
+*[http://www.zenitel.com/product/ELSIR-10C Additional Documentation on Zenitel.com]
-See article: [[TCIS Restore Factory Defaults]]
-[[Category: Stations]]
-[[Category: IP Stations]]
 [[Category: Turbine]]
+[[Category: IP Speakers]]