VR3G-1: Difference between revisions
From Zenitel Wiki
(Created page with "{{ACEIS}}thumb|200px|VR3G-1 (1008021010) *3mm (11 gauge) Stainless Steel *Stainless steel call button *Vandal Resistant Design with IK10 *IP66 - Dirt, dust and water resistant *Tamper switch *Anti-ligature design *For mounting in 3 gang backbox. ==Getting started== *Starting up ==Configuration== The device can operate in different modes. Set the mo...") |
(No difference)
|
Revision as of 15:47, 7 November 2025
- 3mm (11 gauge) Stainless Steel
- Stainless steel call button
- Vandal Resistant Design with IK10
- IP66 - Dirt, dust and water resistant
- Tamper switch
- Anti-ligature design
- For mounting in 3 gang backbox.
Getting started
Configuration
The device can operate in different modes. Set the mode according to the server the station should register to.
|
To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server. |
Station specific configuration:
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Software Release Notes
Connectors, Mounting and Dimensions
Accessories
Software Requirements
This station is fully supported as from AlphaCom version 11.2.3.7