ELSII-10H: Difference between revisions

Latest revision as of 11:55, 14 October 2025

{{ACEIS}

This product is replaced by ZIPS-H (1023321311)

}

Turbine IP Speaker
(1023301310)

Getting started

Starting up

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Restore Factory Defaults and Software Upgrade

The ELSII-10H IP Speaker has a Turbine kit TKIS-2 inside.

Connectors, Indicators and Dimensions

The ELSII-10H IP Speaker has a Turbine kit TKIS-2 inside.

Software Requirements

This station is fully supported as from AlphaCom version 11.2.3.7

Related Information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-[[File:Horn.PNG|thumb|350px]]
+{{ACEIS}{{obs|This product is replaced by [[ZIPS-H|ZIPS-H (1023321311)]]}}}
+[[File:Horn.PNG|thumb|350px|Turbine IP Speaker<br>(1023301310)|alt=]]
+==Getting started==
+* [[Starting Up Turbine Station|Starting up]]
-===<u>Highlights</u>===
+==Configuration==
-* 10W Class D, built-in amplifier
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
-* Dust and water tight – IP 67
+* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
-* >116 dB SPL
+* [[Adding station to existing system (Edge)|Edge mode]]
-* Ideal for Micro Zone PA and systems that require a limited number of speakers
+* [[SIP Intercom - Web Interface|SIP mode]]
-* Ideal for speakers installed in remote locations, e.g. roads and railways
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
-* Relay output for remote control, e.g. doors, signal lamps, gates
-* Powered from the IP network cable using Power over Ethernet (PoE)
-* Ideal for Building Security, Infrastructure and Industrial projects
-===<u>[[TKIS Connections|InterCom connections]]</u>===
+==Restore Factory Defaults and Software Upgrade==
+The ELSII-10H IP Speaker has a Turbine kit [[TKIS-2]] inside.
-===<u>Configuration</u>===
+*[[TKIS Restore Factory Defaults|Restore Factory Defaults]]
-* [[Turbine Configuration]]
+*[[Turbine Software Upgrade|Upgrade via the station web interface]]
-* [[Active Noise Cancelling|Noise Reduction]]
+*[[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
+*[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
+* [[:Category:IMX28 Release notes|Software Release Notes]]
-===<u>Advanced Network Settings</u>===
+==Connectors, Indicators and Dimensions==
-* [[SNMP in Turbine|SNMP]]
+The ELSII-10H IP Speaker has a Turbine kit [[TKIS-2]] inside.
-* [[IEEE 802.1X|802.1X]]
-* [[Turbine Firewall|Firewall]]
-===<u>Software Upgrade</u>===
+* [[Turbine Compact series board connectors|Device Connections]]
-* [[Turbine Software Upgrade]]
+*[[TKIS Indication LEDs|Station Indication LEDs]]
-* [[IMT - Software Upgrade]]
+*[[Speaker Dimensions & Mounting Instructions|Dimensions]]
-===<u>[[TKIS Indication LEDs|Station Indication LEDs]]</u>===
+==Software Requirements==
+This station is fully supported as from AlphaCom version 11.2.3.7
-===<u>[[TKIS Restore Factory Defaults|Restore Factory Defaults]]</u>===
+==Related Information==
-===<u>[[Turbine Compact Board Connectors|Board Connections]]</u>===
+*[http://www.zenitel.com/product/elsii-10h Additional Documentation on Zenitel.com]
-===<u>[[Speaker Dimensions & Mounting Instructions]]</u>===
-===<u>[http://www.zenitel.com/product/elsii-10h Additional Documentation on Zenitel.com]</u>===
 [[Category: Turbine]]
+[[Category: IP Speakers]]