ELSIR-10C: Difference between revisions

Latest revision as of 11:55, 14 October 2025

This product is replaced by ZIPS-C (1023320011)

Turbine IP Speaker
(1023300010)

Getting started

Starting up

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Restore Factory Defaults and Software Upgrade

The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.

Connectors, Indicators and Dimensions

The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.

Software Requirements

This station is fully supported as from AlphaCom version 11.2.3.7

Related Information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-{{APS}}[[File:IP Ceiling Turbine.PNG|thumb|350px|ELSIR-10C]]
+{{obs|This product is replaced by [[ZIPS-C|ZIPS-C (1023320011)]]}}
-== Getting started ==
+{{ACEIS}}[[File:IP Ceiling Turbine.PNG|thumb|350px|Turbine IP Speaker<br>(1023300010)|alt=]]
-* [[TKIS Connections|Connections]]
+==Getting started==
 * [[Starting Up Turbine Station|Starting up]]
-== Configuration ==
+==Configuration==
-The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
-* [[Turbine Configuration - AlphaCom mode|AlphaCom mode]]
+* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
-* [[SIP Intercom Configuration|SIP mode]]
+* [[Adding station to existing system (Edge)|Edge mode]]
-* [[IP Station Configuration - Pulse mode|Pulse mode]]
+* [[SIP Intercom - Web Interface|SIP mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
-== Restore Factory Defaults and Software Upgrade ==
+==Restore Factory Defaults and Software Upgrade==
 The ELSIR-10C IP Speaker has a Turbine kit [[TKIS-2]] inside.
-* [[TKIS Restore Factory Defaults|Restore Factory Defaults]]
-* [[Turbine Software Upgrade|Upgrade via the station web interface]]
-* [[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
-* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
-== Connectors, Indicators and Dimensions ==
+*[[TKIS Restore Factory Defaults|Restore Factory Defaults]]
+*[[Turbine Software Upgrade|Upgrade via the station web interface]]
+*[[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
+*[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
+* [[:Category:IMX28 Release notes|Software Release Notes]]
+==Connectors, Indicators and Dimensions==
 The ELSIR-10C IP Speaker has a Turbine kit [[TKIS-2]] inside.
-* [[Turbine Compact Board Connectors|Board Connections]]
-* [[TKIS Indication LEDs|Station Indication LEDs]]
-* [[Speaker Dimensions & Mounting Instructions|Dimensions]]
-== Related Information ==
+* [[Turbine Compact series board connectors|Device Connections]]
-* [http://www.zenitel.com/product/ELSIR-10C Additional Documentation on Zenitel.com]
+*[[TKIS Indication LEDs|Station Indication LEDs]]
+*[[Speaker Dimensions & Mounting Instructions|Dimensions]]
+==Software Requirements==
+This station is fully supported as from AlphaCom version 11.2.3.7
+==Related Information==
+*[http://www.zenitel.com/product/ELSIR-10C Additional Documentation on Zenitel.com]
 [[Category: Turbine]]
-[[Category:Public Address - Network amplifiers]]
+[[Category: IP Speakers]]