Actions

IP-LCM: Difference between revisions

From Zenitel Wiki
No edit summary
 
(73 intermediate revisions by 7 users not shown)
Line 1: Line 1:
{{APS}}[[File:IP-LCM 1.jpg|thumb|350px|IP Line Connection Module ( 1008095201)]]
{{ACEIS}}
The '''IP-LCM module''' is an expansion to the [[TKIS-2]], and adds high power relays and robust control inputs to the kit without extra wiring.


The IP-LCM module is an expansion to the TKIS-2 that adds high power relays and robust control inputs to the kit without extra wiring. <br/>
DIN-rail mounting allows for a flexible I/O device that reduces the amount of wiring for I/O inside racks and other systems.
DIN-rail mounting allows for a flexible I/O device that reduces the amount of wiring for I/O inside racks and other systems. <br/>
<table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;">
The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.<br/>
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:IP-LCM v1.1.png|500px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>IP Line Connection Module (1008095201)</td>
</tr>
</table>


The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.
* 8 relay outputs
* 8 relay outputs
* 8 control inputs
* 8 control inputs
* Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG
* Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG
* Device powered via the TKIS-2 kit using PoE or local power
* Device powered via the TKIS-2 kit using PoE or local power
* All TKIS-2 features available
* All [[TKIS-2]] features are available in addition, including:
Exigo and AlphaCom are supported.
** 1 relay
** 6 I/Os
** Analog 0dB Line Out
** Analog 0dB Line In (as from hardware version 1008095201.'''0200''')


== Getting started ==
In general Zenitel offers a number of IP based kits, which can be used for a wide range of applications. See the [[Kits - Comparison chart|kit comparison chart]].
* [[IP-LCM Connections|Connections]]
 
==License Requirements==
 
* An [[Licenses_for_ICX-500_and_ICX-AlphaCom_Core#Available_licenses|IP Station License is required for ICX-AlphaCom]].
* An [[Licenses#IP_station_license|IP Station License is required in the AlphaCom XE]].
 
 
Even if only the I/O part (no audio) of the IP-LCM is used a license is required.
 
==IP-LCM hardware versions==
There are two hardware versions:
* Version 1008095201.01xx: Original version
* Version 1008095201.0200: Added support for analog Line In
 
Hardware version 1008095201.0200 can be visually identified by:
** The TKIS-2 kit assembled with the text in same orientation as circuit board text
** Zenitel logo with "9129 V1.1" on the print board
** Line-in connector - J104
** Item number ending with .0200
 
==Getting started==
* [[Starting Up Turbine Station|Starting up]]
* [[Starting Up Turbine Station|Starting up]]


== Configuration ==
==Configuration==
The IP-LCM is configured in the same way as for the Turbine in general.  
The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
[[Turbine Configuration - AlphaCom mode|AlphaCom mode]]
* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
The control inputs on the IP-LCM module is configured to RCI 17-24.
* [[Adding station to existing system (Edge)|Edge mode]]
The control outputs are mapped to pins 17-24.
* [[SIP Intercom - Web Interface|SIP mode]]
{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}


== Restore Factory Defaults and Software Upgrade ==
Device specific configuration for the IP-LCM:
* [[TKIS Restore Factory Defaults|Restore Factory Defaults]]
*[[IP-LCM Configuration (ICX-AlphaCom)|ICX-AlphaCom mode]]
* [[Turbine Software Upgrade|Upgrade via the station web interface]]
*[[Relay_Settings_(Edge)#Operating the relay of a Remote Device|Edge mode]]
*[[Relay_Settings_(SIP)|SIP mode]]


== Connectors, Indicators and Dimensions ==
==Restore Factory Defaults and Software Upgrade==
* [[IP-LCM Compact Board Connectors|Board Connections]]
*[[TKIS Restore Factory Defaults|Restore Factory Defaults]]
* [[IP-LCM Indication LEDs|IP-LCM Indication LEDs]]
*[[Turbine Software Upgrade|Upgrade via the station web interface]]
*[[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
* [[:Category:IMX28 Release notes|Software Release Notes]]
 
==Connectors, Indicators and Dimensions==
* [[IP-LCM Connections|Device Connections]]
* [[IP-LCM Dimensions & Mounting Instructions|Dimensions]]
* [[IP-LCM Dimensions & Mounting Instructions|Dimensions]]


== Additional Documentation on Zenitel.com ==
==Software Requirements==
* [http://www.zenitel.com/product/ip-lcm Additional Documentation on Zenitel.com]
The IP-LCM is fully supported from device version 4.11.x.x
 
When used in AlphaCom mode, this device is fully supported as from AlphaCom version 11.2.3.7
 
==Related Information==
*[[VoIP kit as PA Interface]]
*[http://www.zenitel.com/product/ip-lcm Additional Documentation on Zenitel.com]
 


[[Category:Additional equipment]]
[[Category: Turbine]]
[[Category:Public Address - Interfaces]]
[[Category: Additional equipment]]
[[Category: Public Address - Interfaces]]

Latest revision as of 16:25, 3 January 2025

ACEIS icon.PNG

The IP-LCM module is an expansion to the TKIS-2, and adds high power relays and robust control inputs to the kit without extra wiring.

DIN-rail mounting allows for a flexible I/O device that reduces the amount of wiring for I/O inside racks and other systems.

IP-LCM v1.1.png
IP Line Connection Module (1008095201)

The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.

  • 8 relay outputs
  • 8 control inputs
  • Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG
  • Device powered via the TKIS-2 kit using PoE or local power
  • All TKIS-2 features are available in addition, including:
    • 1 relay
    • 6 I/Os
    • Analog 0dB Line Out
    • Analog 0dB Line In (as from hardware version 1008095201.0200)

In general Zenitel offers a number of IP based kits, which can be used for a wide range of applications. See the kit comparison chart.

License Requirements


Even if only the I/O part (no audio) of the IP-LCM is used a license is required.

IP-LCM hardware versions

There are two hardware versions:

  • Version 1008095201.01xx: Original version
  • Version 1008095201.0200: Added support for analog Line In

Hardware version 1008095201.0200 can be visually identified by:

    • The TKIS-2 kit assembled with the text in same orientation as circuit board text
    • Zenitel logo with "9129 V1.1" on the print board
    • Line-in connector - J104
    • Item number ending with .0200

Getting started

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

Note icon To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.


Device specific configuration for the IP-LCM:

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Software Requirements

The IP-LCM is fully supported from device version 4.11.x.x

When used in AlphaCom mode, this device is fully supported as from AlphaCom version 11.2.3.7

Related Information

Retrieved from "https://wiki.zenitel.com/w/index.php?title=IP-LCM&oldid=239247"
MediaWiki spam blocked by CleanTalk.