Difference between revisions of "DP Commands"
From Zenitel Wiki
(Created page with "'''Data Protocol Commands''' are using ACDP commands on the Simple Link Layer format. The commands begin with $ or @. The most relevant data p...") |
|||
| Line 1: | Line 1: | ||
| − | '''Data Protocol Commands''' are using ACDP commands on the [[Stentofon Simple Link Layer|Simple Link Layer]] format. The commands begin with $ or @. | + | '''Data Protocol Commands''' are using ACDP (AlphaCom Data Protocol) commands on the [[Stentofon Simple Link Layer|Simple Link Layer]] format. The commands begin with $ or @. |
The most relevant data protocol commands for the Event Handler and for [[RCI]]s are listed in the table below. Follow this link for a complete list of [[AlphaNet_Data_Protocol#Message_Formats_-_Grouped_by_Function|all Data Protocol Commands]] | The most relevant data protocol commands for the Event Handler and for [[RCI]]s are listed in the table below. Follow this link for a complete list of [[AlphaNet_Data_Protocol#Message_Formats_-_Grouped_by_Function|all Data Protocol Commands]] | ||
Revision as of 11:46, 30 June 2022
Data Protocol Commands are using ACDP (AlphaCom Data Protocol) commands on the Simple Link Layer format. The commands begin with $ or @.
The most relevant data protocol commands for the Event Handler and for RCIs are listed in the table below. Follow this link for a complete list of all Data Protocol Commands
Pages in category "DP Commands"
The following 48 pages are in this category, out of 48 total.