TCIS-C1: Difference between revisions

Latest revision as of 15:57, 3 January 2025

Turbine substation
(1008111901)

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

This station is fully supported as from AlphaCom version 11.2.3.7

@@ Line 1: / Line 1: @@
-{{AEIPS}}
+{{ACEIS}}
 [[file:TCIS-C1.png|200px|thumb|Turbine substation<br>(1008111901)|alt=]]
 ==Getting started==
@@ Line 5: / Line 5: @@
 ==Configuration==
-The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
 * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 * [[Adding station to existing system (Edge)|Edge mode]]
 * [[SIP Intercom - Web Interface|SIP mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
 ==Restore Factory Defaults and Software Upgrade==