Difference between revisions of "TFIX-3"
From Zenitel Wiki
(→Restore Factory Defaults and Software Upgrade) |
(→Configuration) |
||
| Line 15: | Line 15: | ||
* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | ||
| − | *[[Adding station to existing system (Edge)|Edge mode]] | + | * [[Adding station to existing system (Edge)|Edge mode]] |
| − | *[[SIP Intercom | + | * [[SIP Intercom - Web Interface|SIP mode]] |
| − | *[[IP Station Configuration - Pulse mode|Pulse mode]] | + | * [[IP Station Configuration - Pulse mode|Pulse mode]] |
==Restore Factory Defaults and Software Upgrade== | ==Restore Factory Defaults and Software Upgrade== | ||
Revision as of 13:39, 30 June 2022
|
This product is discontinued! |
This product is replaced bu TFIX-3-V2
Contents
Getting started
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Flowire Software Upgrade Procedure
- Software Release Notes
- Flowire Release notes
Connectors, Indicators and Dimensions
Accessories
Software Requirements
This station is fully supported as from AlphaCom version 11.2.3.11