Difference between revisions of "Stored Voice Message Feature"
From Zenitel Wiki
(New page: {| |- |width="170pt"|'''Feature''': | Stored Voice Message |- |'''Default directory number''': || 8180, 8181, 8182 |- |'''Feature number''': || 111 |-valign="top" |'''Parameter 1''': || ...) |
(→Message selection) |
||
| Line 52: | Line 52: | ||
|8180+||8191-8199 ||{{AlphaWiki|Voice Alarm Messages}} || [[Message Group]] 30 + param 1 | |8180+||8191-8199 ||{{AlphaWiki|Voice Alarm Messages}} || [[Message Group]] 30 + param 1 | ||
|- | |- | ||
| − | |8180+||9550 || [[Auto Attendant]] || [[Message Group]] 11 + param 2 | + | |8180+||9550 || [[Auto_Attendant_and_Event_trigg_on_dialing_digits|Auto Attendant]] || [[Message Group]] 11 + param 2 |
|- | |- | ||
|8180+||622 || {{AlphaWiki|Send Call Request Feature}} || [[Message Group]] 10 + individ 47 ("''Your call is registered''") | |8180+||622 || {{AlphaWiki|Send Call Request Feature}} || [[Message Group]] 10 + individ 47 ("''Your call is registered''") | ||
Revision as of 04:27, 14 April 2010
| Feature: | Stored Voice Message |
| Default directory number: | 8180, 8181, 8182 |
| Feature number: | 111 |
| Parameter 1: | Message Group |
| Parameter 2: | Message individ |
| Description: | Feature to select, listen to, or record a Stored Voice Message. When the directory number dialled from idle the message is played to the user. Users having privilege can use M-key to record a new message to replace the original one.
The feature can be used in combination with PA activation, multi-step to select a Stored Voice Message for playback to group. |
Autoloaded directory numbers
| Dirno | DisplayText | Feature | Parm1 | Parm2 | Parm3 | Description |
|---|---|---|---|---|---|---|
| 8180 | MsgRecord | 111 | 0 | 0 | 0 |
Station recording feature. After 8180, dial message number to record. |
| 8181 | MenuMsg1 | 111 | 11 | 1 | 0 | Customer voice menu message 1 |
| 8182 | MenuMsg2 | 111 | 11 | 2 | 0 | Customer voice menu message 2 |
Message selection
When dialled from Idle, there are two possibilities:
- The message is already specified in parameter 1 and 2 of the directory number. This is the case for auto loaded numbers 8181, 8182.
- Two-step selection: Parameter 1 is zero. Then you can dial a directory number to select the message (to record). This is the case for auto loaded number 8180. See following table.
| Dirno dialled | Feature | Message seleceted | |
|---|---|---|---|
| 8180+ | 8191-8199 | Voice Alarm Messages | Message Group 30 + param 1 |
| 8180+ | 9550 | Auto Attendant | Message Group 11 + param 2 |
| 8180+ | 622 | Send Call Request Feature | Message Group 10 + individ 47 ("Your call is registered") |
| 8180+ | 70 | Stationreset feature | Message Group 10 + individ 42 ("No messages") |
| 8180+ | 660-669 | Mail Messages | Message Group 110 + param 1 |
| 8180+ | 770-770 | Absence Messages | Message Group 100 + param 1 |
Station Message recording
If the station has the Message Record Feature in its Class of service, it is possible to record the selected message from the station. The recorded message is an Easy Message.
- M-pres recording start. (Each M-pres starts a new recording)
- M-release recording ends, recorded message is played back
- 7 Listen once more to the message.
- 8 Store message
- C key, disconnect without storing message.
The Station Recorded message will mask any existing message in the ASVP system or Web loaded message.
If the selected message is already a Station Recorded message, you will have to delete the Station Recorded message, before you can record a new version of the message.
- 0 + M-pres: delete Station Recorded message.
- C key, disconnect without deleting the message.
Deleting the Station Recorded message will unmask any ASVP message or Web loaded message.