IP-ARIO

This product is discontinued!

IP-ARIO, Item Number: 1008095100

This product is discontinued. Replacement depends on type of use (see Kits - Comparison chart):

• For PA integration, use TKIS-2
• For Mobile Radio Integration use TKIE-2
• For I/O, use IP-LCM

The IP Audio Remote I/O (IP-ARIO) unit has a wide set of hardware functions. It can be used as:

• PA Interface over IP
• Radio Interface over IP
• Remote I/O unit over IP
• Remote AlphaCom RS232 port over IP

Requirements

Software:

• AMC-IP version 11.2.3.1 or newer
• AlphaPro Version 11.2.3.0 or newer

Server:

• AlphaCom server is required
• The IP-ARIO is not supported in Pulse or SIP mode.

License Requirements

• An IP-ARIO Audio License is required in the AlphaCom when the audio part of IP-ARIO is used, i.e. when the IP-ARIO is used as PA interface or as a Mobile Radio interface.
• If only the I/O part of the IP-ARIO is used, no license is required. The AlphaCom will automatically recognize the unit as an IP-ARIO and allow it to register without a license.

Connections

• IP-ARIO connections

Configuration

• IP-ARIO Configuration

Advanced Network Settings

• VLAN Tagging (IEEE 802.1Q)
• Network Access Control (802.1X)

Restore Factory Defaults and Software Upgrade

• Reset to factory settings
• Upgrade via the station web interface
• Upgrade using the IMT tool

Indicators and Dimensions

• IP-ARIO LED Indications
• Dimensions

Accessories

• Mounting brackets

Software Requirements

This station is fully supported as form AlphaCom version 11.2.3.1

Related information

• Additional Documentation on Zenitel.com

Related Articles

• PA Failure State System
• Mototrbo and AlphaCom interfacing