ELSIR-10C
From Zenitel Wiki
Getting started
Configuration
The device can operate in different modes. Set the mode according to the server the station should register to.
|
To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server. |
Restore Factory Defaults and Software Upgrade
The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Software Release Notes
Connectors, Indicators and Dimensions
The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.
Software Requirements
This station is fully supported as from AlphaCom version 11.2.3.7