Actions

Difference between revisions of "IP Desktop Station with Video Display - 1408001635"

From Zenitel Wiki

(→‎Manually selection of video image)
(→‎Troubleshooting)
Line 49: Line 49:
 
[[Category: INCA Stations]]
 
[[Category: INCA Stations]]
  
−
=Troubleshooting=
 
−
'''Serial Port settings'''
 
  
−
'''Observation:''' Desktop Video Station flash yellow and red, does not display text, and will not show video on the screen(even though registered). Audio functions normally as calls can be made and received
 
−
 
−
'''Cause:''' The IP station is most likely in “Debug” mode, thus set to the wrong baud rate for the screen. 115200 is used for debugging, while 38400 is for normal operation.
 
−
 
−
'''Fix:''' Use a webbrowser and enter '''[station IP address]/goform/zForm_misc'''. Set '''Baudrate''' to ''38400'', and click '''RS232 for application'''.
 
−
 
−
Note that there is no feedback on current settings. Remember to perform application reset to make the changes take effect.
 
−
[[File:IP Video Desk Trouble1.PNG|thumb|left|400px]]
 
−
<br style="clear:both;" />
 
  
 
{{APS}}
 
{{APS}}

Revision as of 16:26, 16 March 2017

IP Desktop Station with Video Display - 1408001635

Highlights

  • Compatible with VINGTOR-STENTOFON AlphaCom, VINGTOR-STENTOFON Pulse and iPBXs (SIP)
  • 3.5" LCD touchscreen
  • Four dynamic navigation keys for quick access to system menus and directory entries
  • Ten DAK keys provide single-touch access to stations, group calls, audio monitoring, public address zones, radio channels and telephone lines
  • Powered from the IP network cable using Power over Ethernet (PoE)
  • Handset for confidential conversations

Requirements

Software requirements

  • The IP Video Display requires the IP Desktop Station to run software version 02.04.1.12 or newer
  • AMC-IP Software requirements: Version 11.2.3.4 or newer

Camera requirements

  • Video codec: MJPG only
  • Resolution: 240x320

Limitations

Video is not shown when receiving a Call Request, or when called via a Ringing group. After answering the call, video will be shown.

InterCom connections

Main Setup

Configuration

Software upgrade

LED Indications

Dimensions

Reset to factory settings

Additional Documentation on Zenitel.com


APS.png
IP Desktop Station with Video Display - 1408001635

Getting Started

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Advanced Network Settings

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Related information

Retrieved from "https://wiki.zenitel.com/w/index.php?title=IP_Desktop_Station_with_Video_Display_-_1408001635&oldid=129523"