IP Desktop Station with Video Display - 1408001635

IP Desktop Station with Video Display - 1408001635

Requirements

Software requirements

• The IP Video Display requires the IP Desktop Station to run software version 02.04.1.12 or newer
• AMC-IP Software requirements: Version 11.2.3.4 or newer

Camera requirements

• Video codec: MJPG only
• Resolution: 240x320

Limitations

Video is not shown when receiving a Call Request, or when called via a Ringing group. After answering the call, video will be shown.

Configuration

• IP Station Configuration
• VLAN (IEEE 8021Q)
• Network Access Control (802.1X)
• Noise Reduction
• Video Display Configuration
• Voice Activity Detection (VAD)

Software upgrade

• Software Upgrade
• Display upgrade

Reset to factory settings

• Factory Settings of Audio Module
• Factory Settings of Display Module

Additional Documentation on Zenitel.com

IP Desktop Station with Video Display - 1408001635

Getting Started

• Connecting the Intercom station
• Configuration from Display Menu

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

• IP Station Configuration - AlphaCom mode
• IP Station Configuration - SIP mode
• IP Station Configuration - Pulse mode
• IP Desktop - Video Module Configuration

Advanced Network Settings

• VLAN (IEEE 8021Q)
• Network Access Control (802.1X)

Restore Factory Defaults and Software Upgrade

• Reset the intercom station to factory default settings
• Reset the Video Module to factory default settings
• Software Upgrade
• Software Upgrade of the Video Module
• Automatic Software Upgrade (SIP mode only)

Connectors, Indicators and Dimensions

• LED Indications
• Dimensions

Accessories

• Wall bracket for Desktop - 1008091100

Related information

• Additional Documentation on Zenitel.com