IP Video Door Station - 1401110200
From Zenitel Wiki
Contents
Connections
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
General configuration:
- IP Station Configuration - AlphaCom mode
- IP Station Configuration - SIP mode
- IP Station Configuration - Pulse mode
Station specific configuration:
Advanced Network Settings
Restore Factory Defaults and Software Upgrade
- Factory reset of the intercom station
- Factory reset of the Camera Module
- Software Upgrade
- CP Cam upgrade
- Automatic Software Upgrade (SIP mode only)
Connectors, Indicators and Dimensions
Accessories
Additional information
Camera Type: Axis
Highlights
- Robust housing with Aluminium frontplate
- IP65 protection to front
- PoE Powered from one IP network cable
- IP HD Video camera BY AXIS
- Relay output for remote control, e.g. doors, signal lamps and gates
- Button with bi-colour LED ring
InterCom connections
Configuration
- IP Station Configuration
- VLAN (IEEE 8021Q)
- Network Access Control (802.1X)
- Noise Reduction
- Voice Activity Detection (VAD)
- Axis Camera Configuration
Software upgrade
- Software Upgrade
- Axis Camera upgrade