|
|
| (59 intermediate revisions by 5 users not shown) |
| Line 1: |
Line 1: |
| − | The ECPIR-3P call panel is developed for console mounting. The call panel features three fully programmable buttons.
| + | {{AEIPS}}[[file:ECPIR-3P-newZ.png|200px|thumb|Exigo call panel (1023200033)|alt=]] |
| − | [[file:ECPIR-3PFront.PNG|right|500px]] | + | ==Getting started== |
| | + | * [[Starting Up Turbine Station|Starting up]] |
| | | | |
| − | ===Highlights=== | + | ==Configuration== |
| − | * Network call panel for console mounting
| + | The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure. |
| − | * Compatible with AlphaCom and Exigo systems
| |
| − | * Three programmable buttons with individual labels and status indicators
| |
| − | * Separate PTT button
| |
| − | * Optional button protection covers
| |
| − | * Indicators for power, call and fault
| |
| | | | |
| − | ===<u>[[ECPIR Connections|InterCom connections]]</u>===
| + | General configuration: |
| | + | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] |
| | + | * [[Adding station to existing system (Edge)|Edge mode]] |
| | + | * [[SIP Intercom - Web Interface|SIP mode]] |
| | | | |
| − | ===<u>[[Starting Up Turbine Station|Starting up]]</u>===
| + | Station specific configuration for the ECPIR: |
| | + | * [[EBMDR-8 - Configuration|Configuration for Expansion Module EBMDB-8]] |
| | + | * [[Direct Access Key & Ringlist Settings (Edge)]] |
| | + | * [[Direct Access Key & Ringlist Settings (SIP)]] |
| | | | |
| − | ===<u>[[Turbine Configuration|Configuration]]</u>=== | + | ==Restore Factory Defaults and Software Upgrade== |
| | | | |
| − | ===Advanced Network Settings===
| + | *[[TFIE Restore Factory Defaults|Restore Factory Defaults]] |
| − | * [[SNMP in Turbine|SNMP]] | + | *[[Turbine Software Upgrade|Upgrade via the station web interface]] |
| − | * [[IEEE 802.1X|802.1X]] | + | *[[IMT - Discover & Upgrade|Upgrade using the IMT tool]] |
| − | * [[Turbine Firewall|Firewall]] | + | *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]] |
| | + | * [[:Category:IMX28 Release notes|Software Release Notes]] |
| | | | |
| − | ===Software Upgrade=== | + | ==Connectors, Indicators and Dimensions== |
| − | * [[Turbine Software Upgrade]] | + | * [[Turbine Extended series board connectors|Device Connections]] |
| − | * [[IMT - Software Upgrade]] | + | * [[TFIE Indication LEDs|Station Indication LEDs]] |
| | + | * [[ECPIR Dimensions & Mounting Instructions|Dimensions]] |
| | | | |
| − | ===<u>[[TFIE Indication LEDs|Station Indication LEDs]]</u>=== | + | ==Accessories== |
| | | | |
| − | ===<u>[[TFIE Restore Factory Defaults|Restore Factory Defaults]]</u>===
| + | {| {{SimpleTable}} border="0" |
| − | | |
| − | ===<u>[[Turbine Extended Board Connectors|Board Connections]]</u>===
| |
| − | | |
| − | ===<u>[[ECPIR Dimensions & Mounting Instructions]]</u>===
| |
| − | | |
| − | ===<u>[http://www.zenitel.com/product/ecpir-3p Additional Documentation on Zenitel.com]</u>===
| |
| − | | |
| − | ==Installation==
| |
| − | | |
| − | | |
| − | ====Remap input 1-6 as DAK 101 - 106 (Default 11-16)====
| |
| − | The following setting under Station Type in AlphaPro needs to be checked when using the button expansion module.
| |
| − | <br>
| |
| − | This is to move the input mapping of input 1-6 to 101 - 106 from default 11-16.
| |
| − | | |
| − | [[Image:ecpir_input_remap_alphapro.png|thumb|left|500px|Remap inputs]]
| |
| − | <br style="clear:both;" />
| |
| − | | |
| − | EBMDR-8 (1023253008)
| |
| − | | |
| − | ===Gooseneck Microphone MB-30G===
| |
| − | Insert the 5-pin DIN plug on the gooseneck microphone in the microphone connector socket on the ECPIR-3P
| |
| − | | |
| − | Select "'''No accessory'''" under Accessory in the ECPIR-3P web interface.
| |
| − | [[Image:ecpir3p_gooseneck_web.png|thumb|left|500px|ECPIR-3P Gooseneck accessory setting]]
| |
| − | <br style="clear:both;" />
| |
| − | | |
| − | MB-30G (3005020033)
| |
| − | ===Handheld Microphone EMMAR-1H===
| |
| − | Insert the 5-pin DIN plug on the handheld microphone in the microphone connector socket on the ECPIR-3P
| |
| − | | |
| − | Select "'''Handheld microphone'''" under Accessory in the ECPIR-3P web interface.
| |
| − | [[Image:ecpir3p_handheld_web.png|thumb|left|500px|ECPIR-3P Handheld Microphone accessory setting]]
| |
| − | <br style="clear:both;" />
| |
| − | | |
| − | ==Configuration==
| |
| − | ==== Redirection of DAK keys ====
| |
| − | In general every user in AlphaCom has DAK tables for 20 DAK keys. Because the ECPIR can use up to 35 DAK keys with the extension modules, one have to "borrow" DAK tables from other, unused stations.
| |
| − | | |
| − | DAK tables are "borrowed" by pointing to the other users in the DAK table of the ECPIR-3P. This is done by using the symbol ">", followed by the '''physical''' number of the station from where we want to use the DAK table. Any free physical number in the range 1 to 552 can be used. However, it is recommended to use higher numbers to avoid conflicts if the system is expanded in the future.
| |
| − | | |
| − | [[File:DAK Redirect2.PNG|left|thumb|500px|DAK table of the ECPIR-3P: Redirecting to DAK tables of physical 501, 502 ... 510]]
| |
| − | <br style="clear:both;" />
| |
| − | | |
| − | The actual DAK key configuration must be entered in the DAK table of the station to which the ECPIR-3P DAK table is pointing:
| |
| − | [[File:DAK Redirect.PNG|thumb|left|500px|DAK 1-10 are configured in the DAK table of physical #501]]
| |
| − | <br style="clear:both;" />
| |
| − | | |
| − | | |
| − | | |
| − | Several ECPIR-3P stations may redirect to the same DAK tables if they should use the same DAK layout.
| |
| − | | |
| − | ==== LED Indication====
| |
| − | The DAK keys on the ECPIR-3P and on the button expansion panels have two LED's each. The two LED's (red and green) are controlled using the [[IND]] command in the [[Event Handler]].
| |
| − | <br>
| |
| − | *Remember to '''[https://alpha.zenitel.com/index.php/ECPIR-3P_-_1023200033#Remap_input_1-6_as_DAK_101_-_106_.28Default_11-16.29 re-map]''' the inputs as described in the previous section.
| |
| − | =====Call Request=====
| |
| − | To turn on the red led, flashing fast, in the associated DAK key when a [[Call Request|Call Request]] is received, create this event:
| |
| − | | |
| − | [[File:CRMV CallReq.PNG|left|500px|thumb|'''Action Command''': IND %1.phy %1.dak(I%2.dir) 1 3]]
| |
| − | <br style="clear:both;" />
| |
| − | | |
| − | =====Outgoing Conversation=====
| |
| − | To turn on the green led in the associated DAK key when an outgoing call is made, create this event:
| |
| − | | |
| − | [[File:CRMV ConvOut.PNG|left|500px|thumb|'''Action Command''': IND %1.phy %1.dak(I%2.dir) 2 1]]
| |
| − | <br style="clear:both;" />
| |
| − | | |
| − | =====Incoming Conversation=====
| |
| − | | |
| − | | |
| − | To turn on the green led in the associated DAK key when an incoming call is received, create this event:
| |
| − | | |
| − | [[File:CRMV ConvIn.PNG|left|500px|thumb|'''Action Command''': IND %1.phy %1.dak(I%2.dir) 2 1]]
| |
| − | <br style="clear:both;" />
| |
| − | | |
| − | =====Door Status=====
| |
| − | | |
| − | An input of the IP substation can be connected to a door magnet, providing indication on the DAK panel, showing if the door is open or closed.
| |
| − | | |
| − | Example: <br>
| |
| − | To turn on the red led in the associated DAK key when input 3 of the IP substation 159 is activated, create this event:
| |
| − | | |
| − | [[File:CRMV DoorStat.PNG|left|500px|thumb]]
| |
| − | <br style="clear:both;" />
| |
| − | | |
| − | '''Action Command''': <br>
| |
| − | OWN r 105<br>
| |
| − | IND %2.phy %2.dak(I%1.dir) 1 1<br>
| |
| − | | |
| − | 105 is the directory number of the ECPIR-3P
| |
| − | | |
| − | =====Station faults=====
| |
| − | | |
| − | To turn on the red and green led in the associated DAK key when a station is reported faulty, create this event:
| |
| − | | |
| − | [[File:CRMV StatErr.PNG|left|500px|thumb]]
| |
| − | <br style="clear:both;" />
| |
| − | '''Action Command''': <br>
| |
| − | OWN r 105<br>
| |
| − | IND %2.phy %2.dak(I%1.dir) 1 1<br>
| |
| − | IND %2.phy %2.dak(I%1.dir) 2 1<br>
| |
| − | | |
| − | 105 is the directory number of the ECPIR-3P
| |
| − | <br>
| |
| − | See article: [[TFIE Indication LEDs]]
| |
| − | | |
| − | ===<u>Related Accessories</u>===
| |
| − | | |
| − | {|{{SimpleTable}} | |
| | |- | | |- |
| − | |[[File:1023201008.png|100px|link=EBMDR-8]] | + | |style="text-align: center; vertical-align: top;"|[[File:EBMDR-8-newZ.png|100px|link=EBMDR-8]] |
| − | |[[File:MB-30G.PNG|100px|link=MB-30G]] | + | |style="text-align: center; vertical-align: top;"|[[File:3005020033.PNG|100px|link=MB-30G]] |
| − | |[[File:EMMAR-1H.PNG|100px|link=EMMAR-1H]] | + | |style="text-align: center; vertical-align: top;"|[[File:1023533012.png|100px|link=PAM1H]] |
| − | |[[File:EMBR-1.PNG|100px|link=EMBR-1]] | + | |style="text-align: center; vertical-align: top;"|[[File:1023595010.PNG|80px|link=EMBR-1]] |
| − | |[[File:EMBR-2.PNG|100px|link=EMBR-2]] | + | |style="text-align: center; vertical-align: top;"|[[File:1023595020.PNG|140px|link=EMBR-2]] |
| | |- | | |- |
| − | |<small>[[EBMDR-8]]</small> | + | |style="text-align: center; vertical-align: top;"|[[EBMDR-8]]</small> |
| − | |<small>[[MB-30G]]</small> | + | |style="text-align: center; vertical-align: top;"|[[MB-30G]]</small> |
| − | |<small>[[EMMAR-1H]]</small> | + | |style="text-align: center; vertical-align: top;"|[[PAM1H]]</small> |
| − | |<small>[[EMBR-1]]</small> | + | |style="text-align: center; vertical-align: top;"|[[EMBR-1]]</small> |
| − | |<small>[[EMBR-2]]</small> | + | |style="text-align: center; vertical-align: top;"|[[EMBR-2]]</small> |
| | |- | | |- |
| | |} | | |} |
| | | | |
| − | <Gallery>
| + | ==Software Requirements== |
| − | |[[File:1023201008.png|thumb|100px|link=EBMDR-8]]
| + | This station is fully supported as from AlphaCom version 11.2.3.11 |
| − | |[[File:MB-30G.PNG|thumb|100px|link=MB-30G]]
| + | * Edge mode is supported from firmware version 5.0 |
| − | |[[File:EMMAR-1H.PNG|thumb|100px|link=EMMAR-1H]]
| + | * SIP (and Pulse) mode is fully supported as from firmware version 4.7 |
| − | |[[File:EMBR-1.PNG|thumb|100px|link=EMBR-1]]
| |
| − | |[[File:EMBR-2.PNG|thumb|100px|link=EMBR-2]]
| |
| − | <Gallery/>
| |
| | | | |
| − | ==Related Articles== | + | ==Related Information== |
| | | | |
| | + | *[https://www.zenitel.com/product/ecpir-3p Additional Documentation on Zenitel.com] |
| | | | |
| − | [[Category: Stations]]
| |
| − | [[Category: IP Stations]]
| |
| | [[Category: Turbine]] | | [[Category: Turbine]] |
