Difference between revisions of "ENA2200-AC2 Amplifier"

Latest revision as of 12:52, 28 June 2024

ENA2200-AC2 amplifier (1023102210)

The ENA2200-AC2 Amplifier is a class D amplifier providing 2 x 200W that can register to the ICX-AlphaCom server or a SIP server over an IP network. It operates from a 115/230 VAC supply and is designed to survive minor interruptions to the power supply.

The amplifier has two separate loudspeaker channels. Each channel can be addressed separately, i.e. belong to two different zones, each with a maximum 200W output. The two channels can alternatively be combined into one channel ("One Channel Mode") where the two loudspeaker channels play identical audio in phase. Furthermore, the two amplifier channels can be bridged to provide a single 400W load.

The amplifier monitors the speaker lines for shorts, overload and opens. The amplifier also monitors control inputs, power, temperature, network connections and every other component required for operation of essential services. Faults will be indicated locally on the amplifier and are reported via SNMP. In case of ICX-AlphaCom server, an error will raise an event in the Event Handler, which can generate reports to e.g. syslog, SNMP and internal log.

Configurable control inputs/outputs and audio inputs can be utilized locally or controlled by the system, such as using audio input for background music. The audio line input can also be configured in a Hardware Bypass mode, forwarding audio to the 100V channels even without a server available, adding redundancy and flexibility to the amplifier's functionality.

SIP mode supported from version 8.1.3.0

Installation, Mounting and Dimensions

Configuration

AlphaCom mode

SIP mode

Common Configuration

Software Upgrade and Restore Factory Defaults

The ENA amplifier is a "Turbine" device, and the software is upgraded in the same way as Turbine Intercom stations.

Load Factory Default values:

To load default configuration and reset to DHCP, press and hold the menu selection knob for 20 seconds while booting up the Amplifier.
Factory Default values can also be loaded via the web interface of the amplifier, from the Station Administration > Reboot menu

Related Information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-{{AIS}}[[File:ENA2200AC2.png|thumb|500px|ENA2200-A2C amplifier  (1023102210)|alt=]]
+{{AIS}}[[File:ENA2200AC2.png|thumb|500px|ENA2200-AC2 amplifier  (1023102210)|alt=]]
 The ENA2200-AC2 Amplifier is a class D amplifier providing 2 x 200W that can register to the ICX-AlphaCom server or a SIP server over an IP network. It operates from a 115/230 VAC supply and is designed to survive minor interruptions to the power supply.
@@ Line 34: / Line 34: @@
 ===SIP mode ===
 * [[ENA Amplifier - Basic configuration (SIP mode)|Getting Started (SIP mode)]]
-* [[ENA Configuration - SIP mode|SIP mode]]
+* [[ENA Amplifier Configuration (SIP)|Web interface - SIP mode]]
-* [[ENA Advanced configuration mode (SIP)|Advanced configuration mode]]
 * [[Distributed Automatic Volume Control (DAVC) (SIP)|Distributed Automatic Volume Control (DAVC) in SIP]]
@@ Line 41: / Line 40: @@
 * [[ENA Amplifier - Calibrating the loudspeaker lines|Calibrating the loudspeaker lines]]
 * [[ENA amplifier in Bypass Mode]]
+*[[ENA2x00-AC2 - One Channel Mode|One Channel Mode]]
 == Software Upgrade and Restore Factory Defaults ==
@@ Line 49: / Line 49: @@
 Load Factory Default values:
 * To load default configuration and reset to DHCP, press and hold the [[ENA User Interface|menu selection knob]] for 20 seconds while booting up the Amplifier.
-* Factory Default values can also be loaded via the web interface of the amplifier, from the [[ENA_Configuration_-_AlphaCom_mode#Station_Administration_tab|Station Administration > Reboot]] menu
+* Factory Default values can also be loaded via the web interface of the amplifier, from the [[ENA_Configuration_-_ICX-AlphaCom_mode#Reboot|Station Administration > Reboot]] menu
 == Related Information ==