TKIS-2: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{ | {{ACEIS}}[[file:TKIS-2-newZ.png|thumb|400px|TKIS-2 VoIP Kit (1008131020)|alt=]] | ||
'''This article also applies to TKIS-2CC (Conformal Coated).''' | |||
The encapsulated TKIS-2 Turbine Kit VoIP Intercom Module can be used to build customized intercom or help point solutions. It is also used as an interface towards external Public Address (PA) systems. | The encapsulated TKIS-2 Turbine Kit VoIP Intercom Module can be used to build customized intercom or help point solutions. It is also used as an interface towards external Public Address (PA) systems. | ||
| Line 8: | Line 10: | ||
==Configuration== | ==Configuration== | ||
<div style="float:right;"> <youtube width="350" height="210">4a38BQb64d8</youtube> </div> | <div style="float:right;"> <youtube width="350" height="210">4a38BQb64d8</youtube> </div> | ||
The | The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to. | ||
* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | ||
* [[Adding station to existing system (Edge)|Edge mode]] | * [[Adding station to existing system (Edge)|Edge mode]] | ||
* [[SIP Intercom - Web Interface|SIP mode]] | * [[SIP Intercom - Web Interface|SIP mode]] | ||
{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}} | |||
==Restore Factory Defaults and Software Upgrade== | ==Restore Factory Defaults and Software Upgrade== | ||
Latest revision as of 15:37, 7 November 2025
This article also applies to TKIS-2CC (Conformal Coated).
The encapsulated TKIS-2 Turbine Kit VoIP Intercom Module can be used to build customized intercom or help point solutions. It is also used as an interface towards external Public Address (PA) systems.
In general Zenitel offers a number of IP based kits, which can be used for a wide range of applications. See the kit comparison chart.
Getting started
Configuration
The device can operate in different modes. Set the mode according to the server the station should register to.
|
To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server. |
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Software Release Notes
Connectors, Indicators and Dimensions
Accessories
- TA-16, 5 x Loudspeakers incl cable - 1008140160
- TA-17, 10 x Electret microphones incl 12cm cable - 1008140170
Software Requirements
This station is fully supported as from AlphaCom version 11.2.3.7