Dynamic group call

Operation (CRM IV and CRM V)

• Press a dedicated "Group Config." DAK key. The red led in key starts flashing
• Select subscribers to be included/excluded (toggle function) by pressing the assosiated DAK keys. A flashing green led in the keys indicates that the stations are included
• Press the "Group Config." button again, the group call is now activated. The red led in the DAK key stops flashing
• The green leds continue to flash during the group call
• Cancel the group call. All members will be removed, and the green leds stop flashing

It is not neccessary to use CRM-IV stations, but with regular stations you will not get LED feedback on group call inclusion/exclusion.

LIMITATION: You can only include subscribers, you cannot include groups!

Programming

• Software requirement: AMC 8.26 or later

• In AlphaPro, Directory & Features, create a directory number, feature 95/0. Directory number 9535 is included by default. Program the "Group Config." DAK button to 9535.

• Each CRM-IV must “own” a group call that nobody else uses. The directory number of the group call must be changed so that the two last digits are identical to the group index number. Example:
  • Group 2 = 8502
  • Group 10 = 8510

• Enter the group call directory number in the User Defined Parameter (%1.EXP) field of the CRM-IV. In AlphaPro, Users & Stations -> UDP -> User Defined Parameter (%1.EXP).
• Put all CRM-IV’s that should have Dynamic group call feature in UDP group 1.

Event Handler configuration

In AlphaPro, go to Exchange and System -> Events, press Insert and create the following events:

---

Event 1

Event Owner:	Stations w/ UDP Id: 1 (The CRM IV stations)
Event type:	15 – Event Trigger
Subevent:	0
When change to:	ON or OFF
When related to:	Directory Number, Id: 9535
Action:	IND %1.phy %1.dak(I%2.dir) 1 3

---

Event 2

Event Owner:	Stations w/ UDP, Id: 1 (The CRM IV stations)
Event type:	25 – Event trigger with parameter
Subevent:	0
When change to:	ON or OFF
When related to:	All
Action:	IF %sgm(%2.phy,%1.exp(2))
	IND %1.phy %1.dak(I%2.dir) 2 3 OFF
	ENDIF
	IF %op(%sgm(%2.phy,%1.exp(2)),=,0)
	IND %1.phy %1.dak(I%2.dir) 2 3 ON
	ENDIF
	$GRM L%2.dir NG%1.exp(2) U2
	IF %op(%2.dir,=,9535)
	$DISCON_ST L%1.dir 0
	IND %1.phy %1.dak(I%2.dir) 2 3 OFF
	PAUSE
	PAUSE
	PAUSE
	$DD L%1.dir L%1.exp
	ENDIF

---

Event 3

Event Owner:	Stations w/ UDP, Id: 1 (The CRM IV stations)
Event type:	08 – Conversation - Outgoing
Subevent:	0
When change to:	OFF
When related to:	All
Action:	IF %op(%2.dir,=,%1.exp)
	IF %gns(%1.exp(2),0)
	$ER U15 U1 U1 U1 N%gns(%1.exp(2),0) U3 %1.ref
	ENDIF
	ENDIF

---

Event 4

Event Owner:	Stations w/ UDP, Id: 8 (All stations)
Event type:	15 – Event Trigger
Subevent:	1 (NOTE: Subtype 1, NOT 0)
When change to:	ON
When related to:	All
Action:	$GRM N%gns(%2.exp(2),0) NG %2.exp(2) U0
	IND %2.phy %2.dak(I%1.dir) 2 3 OFF
	PAUSE
	IF %gns(%2.exp(2),0)
	$ER U15 U1 U1 U1 N%gns(%2.exp(2),0) U3 %2.ref
	ENDIF

---