Difference between revisions of "IP-ARIO"
From Zenitel Wiki
(→Restore Factory Defaults and Software Upgrade) |
(→Advanced Network Settings) |
||
| Line 35: | Line 35: | ||
== Advanced Network Settings == | == Advanced Network Settings == | ||
| − | * [[VLAN | + | * [[VLAN Settings (Devices)]] |
* [[IEEE 802.1X|Network Access Control (802.1X)]] | * [[IEEE 802.1X|Network Access Control (802.1X)]] | ||
Latest revision as of 19:58, 25 September 2024
|
This product is discontinued! |
This product is discontinued. Replacement depends on type of use (see Kits - Comparison chart):
The IP Audio Remote I/O (IP-ARIO) unit has a wide set of hardware functions. It can be used as:
- PA Interface over IP
- Radio Interface over IP
- Remote I/O unit over IP
- Remote AlphaCom RS232 port over IP
Contents
Requirements
Software:
- AMC-IP version 11.2.3.1 or newer
- AlphaPro Version 11.2.3.0 or newer
Server:
- AlphaCom server is required
- The IP-ARIO is not supported in Pulse or SIP mode.
License Requirements
- An IP-ARIO Audio License is required in the AlphaCom when the audio part of IP-ARIO is used, i.e. when the IP-ARIO is used as PA interface or as a Mobile Radio interface.
- If only the I/O part of the IP-ARIO is used, no license is required. The AlphaCom will automatically recognize the unit as an IP-ARIO and allow it to register without a license.
Connections
Configuration
Advanced Network Settings
Restore Factory Defaults and Software Upgrade
- Reset to factory settings
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Software Release Notes
Dimensions
Accessories
Software Requirements
This station is fully supported as form AlphaCom version 11.2.3.1