IP Substation Kit - 1008090200: Difference between revisions

Revision as of 20:27, 17 March 2017

IP Substation Kit

PCB LED Indications

Dimensions

Reset to factory settings

Board Connectors

Additional Documentation on Zenitel.com

Connections

Intercom connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Advanced Network Settings

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Related information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
 [[Image:80902 RS.jpg|thumb|250px|IP Substation Kit]]
-===<u>Highlights</u>===
-* Compatible with Vingtor-Stentofon AlphaCom, Vingtor-Stentofon Pulse and iPBXs (SIP)
-* Enables manufacturing of custom made IP substations
-* Integrated data switch with advanced networking and security functions
-* Supports digital inputs and output via built-in relay
-* Powered from the IP network cable using Power over Ethernet (PoE)
-===<u>[[IP Sub Connections|InterCom connections]]</u>===
-===<u>Configuration</u>===
-* [[IP Station Configuration]]
-* [[IEEE 802.1Q|VLAN (IEEE 8021Q)]]
-* [[IEEE 802.1X|Network Access Control (802.1X)]]
-* [[Active Noise Cancelling|Noise Reduction]]
-* [[Voice Activity Detection (VAD)]]
-===<u>[[INCA Station Software upgrade|Software Upgrade]]</u>===
 ===<u>[[INCA Substation PCB LED Indicators|PCB LED Indications]]</u>===