TEIV-4+

Turbine Extended IP Video Intercom with RFID card space
(1008318240)

Getting started

• Starting up

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

• ICX-AlphaCom mode
• Edge mode
• SIP mode

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Audio and Video Configuration

• Audio Settings
• Video Settings

Restore Factory Defaults and Software Upgrade

• Restore Factory Defaults
• Upgrade via the station web interface
• Upgrade using the IMT tool
• Automatic Software Upgrade (SIP mode only)

Connectors, Indicators and Dimensions

• Board Connections
• Station Indication LEDs
• Dimensions
• Mounting Card reader on TEIV-4+

Accessories

• TA-33, Turbine Extended On-wall BAckbox - 1008140330
• TA-34, Turbine Extended Flushmount Backbox - 1008140340
• TA-14 Microphone Windscreen - 1008140140

Software Requirements

• Minimum firmware version: 7.4.3.0
• Minimum version in ICX-AlphaCom server: 1.2.3.9

Related Information

• Turbine Compact and MRBD
• TCIV/ONVIF Troubleshooting Guide
• Additional Documentation on Zenitel.com