Actions

Difference between revisions of "IP-ARIO"

From Zenitel Wiki

(→‎Default Grouping of fault state on CRM DAK)
(→‎Restore Factory Defaults and Software Upgrade)
 
(169 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
{{Obsolete}}
 +
{{AI}}
 +
[[File:IP-ARIO.PNG|thumb|400px|IP-ARIO, Item Number: 1008095100]]
  
−
==PA Failure State System==
+
This product is discontinued.
 +
Replacement depends on type of use (see [[Kits - Comparison chart]]):
 +
* For PA integration, use [[TKIS-2]]
 +
* For Mobile Radio Integration  use [[TKIE-2]]
 +
* For I/O, use [[IP-LCM]]
  
 +
The IP Audio Remote I/O ('''IP-ARIO''') unit has a wide set of hardware functions. It can be used as:
 +
*PA Interface over IP
 +
*Radio Interface over IP
 +
*Remote I/O unit over IP
 +
*Remote AlphaCom RS232 port over IP
  
−
When used as PA interface some of the IP-ARIO inputs are used for reporting failure state of 1 or 2 amplifiers.<br>
+
== Requirements ==
 +
'''Software:'''
 +
* AMC-IP version 11.2.3.1 or newer
 +
* AlphaPro Version 11.2.3.0 or newer
  
 +
'''Server:'''
 +
* AlphaCom server is required
 +
* The IP-ARIO is not supported in Pulse or SIP mode.
  
−
The various IP-ARIO PA faults and states are reported as sub events on the line error event.<br>
+
== License Requirements ==
−
When fault state is reported OFF from IP-ARIO the fault state in AMCD will still be active until acknowledge and cleared by the user. <br>
+
* An [[Licenses#IP-ARIO_Audio_License|IP-ARIO Audio License]] is required in the AlphaCom when the audio part of IP-ARIO is used, i.e. when the IP-ARIO is used as PA interface or as a Mobile Radio interface.  
 +
* If only the I/O part of the IP-ARIO is used, no license is required. The AlphaCom will automatically recognize the unit as an IP-ARIO and allow it to register without a license.
  
−
A NVRAM structure is used for additional configurable elements. <br>
+
== Connections ==
−
Configurable elements are:
+
* [[IP-ARIO Connections|IP-ARIO connections]]
−
*Default description text intended for use in fault mail to PA panels. The text are sent to event handler as %2.nam
 
−
*Default placement of status indication in the "DAK block" related to the PA interface. ([[IP-ARIO#Default_Grouping_of_fault_state_on_CRM_DAK | DAK block]])
 
−
*Default priority used for fault mails. (Unique priority make it easy to remove specific fault from mail queues)
 
  
−
{| border="1"
+
==Configuration==  
−
|-
+
* [[IP-ARIO Configuration]]
−
!colspan="7" align="center" style="background:#ffcb00;"|Event Handler IP-ARIO failure states
 
−
|-
 
−
!style="background:#ffcb00;" width="120pt"|Event text (%2.nam)
 
−
!style="background:#ffcb00;" width="120pt"|SUB event (%sev)
 
−
!style="background:#ffcb00;" width="120pt"|DAK block index (%pai)
 
−
!style="background:#ffcb00;" width="120pt"|Priority (%pap)
 
−
!style="background:#ffcb00;" width="220pt"|Comment
 
−
|-
 
−
!| FAULT ACK
 
−
!| 2
 
−
!| 7
 
−
!| 50
 
−
!| Event text for debugging
 
−
|-
 
−
!| FAULT CLEAR
 
−
!| 3
 
−
!| 10
 
−
!| 50
 
−
!| Event text for debugging
 
−
|-
 
−
!| ZONE BLINK
 
−
!| 4
 
−
!| 1
 
−
!| 50
 
−
!| Event text for debugging
 
−
|-
 
−
!| ZONE STEADY
 
−
!| 5
 
−
!| 1
 
−
!| 50
 
−
!| Event text for debugging
 
−
|-
 
−
!| IPA DOWN
 
−
!| 10
 
−
!| 4
 
−
!| 140
 
−
!|
 
−
|-
 
−
!| RELAY 1
 
−
!| 11
 
−
!| 2
 
−
!| 100
 
−
!|
 
−
|-
 
−
!| POWER 1
 
−
!| 12
 
−
!| 5
 
−
!| 101
 
−
!|
 
−
|-
 
−
!| LINE MON 1
 
−
!| 13
 
−
!| 8
 
−
!| 102
 
−
!|
 
−
|-
 
−
!| XLR MON 1
 
−
!| 14
 
−
!| 11
 
−
!| 103
 
−
!|
 
−
|-
 
  
−
!| RELAY 2
+
== Advanced Network Settings ==
−
!| 15
+
* [[VLAN Tagging (IEEE 802.1Q)]]
−
!| 3
+
* [[IEEE 802.1X|Network Access Control (802.1X)]]
−
!| 104
 
−
!|
 
−
|-
 
−
!| POWER 2
 
−
!| 16
 
−
!| 6
 
−
!| 105
 
−
!|
 
−
|-
 
−
!| LINE MON 2
 
−
!| 17
 
−
!| 9
 
−
!| 106
 
−
!|
 
−
|-
 
−
!| XLR MON 2
 
−
!| 18
 
−
!| 12
 
−
!| 107
 
−
!|
 
−
|-
 
−
!| -
 
−
!| 20
 
−
!| -
 
−
!| -
 
−
!| "Live" State of Line Mon. 1
 
−
|-
 
−
!| -
 
−
!| 21
 
−
!| -
 
−
!| -
 
−
!| "Live" State of Line Mon. 2
 
−
|-
 
−
!| -
 
−
!| 22
 
−
!| -
 
−
!| -
 
−
!| "Live" State of Amp 1 Discon.
 
−
|-
 
−
!| -
 
−
!| 23
 
−
!| -
 
−
!| -
 
−
!| "Live" State of Amp 2 Discon.
 
−
|-
 
−
!| -
 
−
!| 24
 
−
!| -
 
−
!| -
 
−
!| "Live" State of 20KHZ Mon. 1
 
−
|-
 
−
!| -
 
−
!| 25
 
−
!| -
 
−
!| -
 
−
!| "Live" State of 20KHZ Mon. 2
 
−
|-
 
−
!| -
 
−
!| 26
 
−
!| -
 
−
!| -
 
−
!| "Live" State of Level Detect. 1
 
−
|-
 
−
!| -
 
−
!| 27
 
−
!| -
 
−
!| -
 
−
!| "Live" State of Level Detect. 2
 
−
|-
 
  
 +
== Restore Factory Defaults and Software Upgrade ==
 +
* [[IP-ARIO Restore Factory Defaults|Reset to factory settings]]
 +
* [[INCA Station Software upgrade|Upgrade via the station web interface]]
 +
* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
 +
* [[:Category:INCA Release notes|Software Release Notes]]
  
−
|}
+
== Dimensions ==
 +
*[[IP_ARIO Dimensions & Mounting Instructions|Dimensions]]
  
−
===Updated Event Handler Macros and $DP messages===
+
== Accessories ==
−
[[wudd]]        (Added label and string variables)
+
* [[IP ARIO Dimensions & Mounting Instructions|Mounting brackets]]
−
[[%udd]]        (Added label and string variables)
 
−
[[IND_-_Indicator_control_for_CRMIV_LEDs,_buzzer_etc. |gind]]        (NEW  group version of ''ind'')
 
−
[[%paf]]        (NEW, PA fault in UDP group check)
 
−
[[%pai]]        (NEW, PA fault indicator in DAK block)
 
−
[[%pap]]        (NEW, PA fault mail priority)
 
−
[[%prci]]      (NEW, Current Physical RCI state)
 
−
[[%prco]]       (NEW, Current Physical RCO state)
 
  
−
$[[PA_CMD]]    (NEW, PA command, ACK/CLEAR)
+
== Software Requirements ==
−
$[[SET_IPRCO]]  (NEW, Set physical RCO on IP station/IP-ARIO)
+
This station is fully supported as form AlphaCom version 11.2.3.1
−
$[[CANCEL_MAIL]](Added option for delete mail with specific priority, Mail-id = 253)
 
  
 +
== Related information ==
 +
* [http://www.zenitel.com/product/ip-ario Additional Documentation on Zenitel.com]
  
  
−
===Default Grouping of fault state on CRM DAK===
+
[[Category: INCA Stations]]
−
 
−
The status of faults of one IP-ARIO are grouped to one CRM DAK block of 3 * 4 DAK keys. <br>
 
−
 
 
−
{| border="1"
 
−
|-
 
−
!colspan="7" align="center" style="background:#ffcb00;"|Fault Indication On DAK panel
 
−
|-
 
−
!| ZONE FAULT
 
−
!| RELAY 1
 
−
!| RELAY 2
 
−
|-
 
−
!| IPA DOWN
 
−
!| POWER 1
 
−
!| POWER 2
 
−
|-
 
−
!| FAULT ACK
 
−
!| LINE MON 1
 
−
!| LINE MON 2
 
−
|-
 
−
!| FAULT CLEAR
 
−
!| XLR DISCON 1
 
−
!| XLR DISCON 2
 
−
|-
 
−
|}
 
−
 
 
−
== Example Configuration ==
 
−
 
 
−
=== Fault Handeling on a CRM with DAK pannels ===
 
−
 
 
−
The status of faults of one IP-ARIO are grouped to one CRM DAK block of 3 * 4 DAK keys. <br>
 
−
[[IP-ARIO#Default_Grouping_of_fault_state_on_CRM_DAK | DAK block]]
 
−
 
 
−
The block number used for each IP-ARIO is configured in AlphaPro->Station-> "used defined parameter" (%EXP). <br>
 
−
Block number 1 to 8.
 
−
 
 
−
Example system:
 
−
*Three IP-ARIO in UDP group 1, DAK block 1,2 and 3 programmed in EXP.
 
−
*Two CRM with DAK modules in station group 2 and UDP 2.
 
−
*RCO 1 used for fault indication of fault state in UDP group 1 (ON or OFF)
 
−
 
 
−
===Event for fault indication and fault mail===
 
−
The following event will do: (in this order)
 
−
*Set fault indicators on CRM DAK panels in CRM group 2 in the DAK block position.
 
−
*Send Mail and Cancel Mail to CRM group 2, with related fault priority.
 
−
*Set Zone fault indicator on CRM DAK blinking/steady/off
 
−
*Set fault indicator led on IP-ARIO
 
−
*Set global fault indicator (RCO) related to fault in UDP group 1 (Do we need blinking?)
 
−
*Control ACK and CLEAR status led for the related DAK Block leds.
 
−
 
 
−
Owner:        UDP 1
 
−
Event Type    13-Faulty station line
 
−
Sub Event    255
 
−
When Change  ON/OFF
 
−
Action:
 
−
if %op(%sev,>=,10)
 
−
  gind 2 %pai(%1.exp) 1 1
 
−
  if %chg(1,0)
 
−
    $STM %1.ref L85 U%pap '(%1.dir) %2.nam'
 
−
    stop
 
−
  endif
 
−
  $CANM %1.ref L85 NM253 U%pap
 
−
  stop
 
−
endif
 
−
$SLRC W1 U%paf(1)
 
−
if %op(%sev,=,4)
 
−
  gind 2 %pai(%1.exp) 1 2
 
−
  ind %1.phy 1 1 2
 
−
  stop
 
−
endif
 
−
gind 2 %pai(%1.exp) 1 1
 
−
 
 
−
===Fault ACK/CLEAR on DAK keys===
 
−
*One common ACK event for all CRM stations in UDP 2 for each IP-ARIO.
 
−
Owner:        UDP 2
 
−
Event Type    30-DAK AS RCI
 
−
Sub Event    CRM DAK key used for Ack
 
−
When Change  ON
 
−
Action:
 
−
$PA_CMD L(IP-ARIO) U01
 
−
 
 
−
*One common Clear event for all CRM stations in UDP 2 for each IP-ARIO.
 
−
Owner:        UDP 2
 
−
Event Type    30-DAK AS RCI
 
−
Sub Event    CRM DAK key used for Clear
 
−
When Change  ON
 
−
Action:
 
−
$PA_CMD L(IP-ARIO) U02
 
  
 +
=Related Articles=
 +
* [[PA Failure State System]]
 +
* [[Mototrbo and AlphaCom interfacing]]
 +
* [[IP station as program]]
  
 +
[[Category: Discontinued Stations]]
 
[[Category: IP-ARIO]]
 
[[Category: IP-ARIO]]
 +
[[Category: Public Address - Interfaces]]
 +
[[Category: Additional equipment]]

Latest revision as of 09:18, 16 August 2022

Obsolete icon This product is discontinued!


AI.png
IP-ARIO, Item Number: 1008095100

This product is discontinued. Replacement depends on type of use (see Kits - Comparison chart):

  • For PA integration, use TKIS-2
  • For Mobile Radio Integration use TKIE-2
  • For I/O, use IP-LCM

The IP Audio Remote I/O (IP-ARIO) unit has a wide set of hardware functions. It can be used as:

  • PA Interface over IP
  • Radio Interface over IP
  • Remote I/O unit over IP
  • Remote AlphaCom RS232 port over IP

Requirements

Software:

  • AMC-IP version 11.2.3.1 or newer
  • AlphaPro Version 11.2.3.0 or newer

Server:

  • AlphaCom server is required
  • The IP-ARIO is not supported in Pulse or SIP mode.

License Requirements

  • An IP-ARIO Audio License is required in the AlphaCom when the audio part of IP-ARIO is used, i.e. when the IP-ARIO is used as PA interface or as a Mobile Radio interface.
  • If only the I/O part of the IP-ARIO is used, no license is required. The AlphaCom will automatically recognize the unit as an IP-ARIO and allow it to register without a license.

Connections

Configuration

Advanced Network Settings

Restore Factory Defaults and Software Upgrade

Dimensions

Accessories

Software Requirements

This station is fully supported as form AlphaCom version 11.2.3.1

Related information

Related Articles

Retrieved from "https://wiki.zenitel.com/w/index.php?title=IP-ARIO&oldid=230784"