Latest revision as of 09:18, 16 August 2022

This product is discontinued!

IP-ARIO, Item Number: 1008095100

This product is discontinued. Replacement depends on type of use (see Kits - Comparison chart):

For PA integration, use TKIS-2
For Mobile Radio Integration use TKIE-2
For I/O, use IP-LCM

The IP Audio Remote I/O (IP-ARIO) unit has a wide set of hardware functions. It can be used as:

PA Interface over IP
Radio Interface over IP
Remote I/O unit over IP
Remote AlphaCom RS232 port over IP

Requirements

Software:

AMC-IP version 11.2.3.1 or newer
AlphaPro Version 11.2.3.0 or newer

Server:

AlphaCom server is required
The IP-ARIO is not supported in Pulse or SIP mode.

License Requirements

An IP-ARIO Audio License is required in the AlphaCom when the audio part of IP-ARIO is used, i.e. when the IP-ARIO is used as PA interface or as a Mobile Radio interface.
If only the I/O part of the IP-ARIO is used, no license is required. The AlphaCom will automatically recognize the unit as an IP-ARIO and allow it to register without a license.

Connections

IP-ARIO connections

Configuration

IP-ARIO Configuration

Advanced Network Settings

Restore Factory Defaults and Software Upgrade

Dimensions

Dimensions

Accessories

Mounting brackets

Software Requirements

This station is fully supported as form AlphaCom version 11.2.3.1

Related information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-{{A}}
+{{Obsolete}}
+{{AI}}
 [[File:IP-ARIO.PNG|thumb|400px|IP-ARIO, Item Number: 1008095100]]
+This product is discontinued.
+Replacement depends on type of use (see [[Kits - Comparison chart]]):
+* For PA integration, use [[TKIS-2]]
+* For Mobile Radio Integration  use [[TKIE-2]]
+* For I/O, use [[IP-LCM]]
 The IP Audio Remote I/O ('''IP-ARIO''') unit has a wide set of hardware functions. It can be used as:
+*PA Interface over IP
+*Radio Interface over IP
+*Remote I/O unit over IP
+*Remote AlphaCom RS232 port over IP
-== Software Requirements ==
+== Requirements ==
+'''Software:'''
 * AMC-IP version 11.2.3.1 or newer
 * AlphaPro Version 11.2.3.0 or newer
+'''Server:'''
+* AlphaCom server is required
+* The IP-ARIO is not supported in Pulse or SIP mode.
 == License Requirements ==
@@ Line 20: / Line 35: @@
 == Advanced Network Settings ==
-* [[IEEE 802.1Q|VLAN (IEEE 8021Q)]]
+* [[VLAN Tagging (IEEE 802.1Q)]]
 * [[IEEE 802.1X|Network Access Control (802.1X)]]
 == Restore Factory Defaults and Software Upgrade ==
 * [[IP-ARIO Restore Factory Defaults|Reset to factory settings]]
-* [[INCA Station Software upgrade|Software Upgrade]]
+* [[INCA Station Software upgrade|Upgrade via the station web interface]]
+* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
+* [[:Category:INCA Release notes|Software Release Notes]]
-== Indicators and Dimensions ==
+== Dimensions ==
-* [[IP-ARIO LED Indicators|IP-ARIO LED Indications]]
 *[[IP_ARIO Dimensions & Mounting Instructions|Dimensions]]
 == Accessories ==
-* [[Back box flush mount - 1008098100]]
+* [[IP ARIO Dimensions & Mounting Instructions|Mounting brackets]]
-* [[Back box on wall mount - 1008098000]]
+== Software Requirements ==
+This station is fully supported as form AlphaCom version 11.2.3.1
 == Related information ==
@@ Line 42: / Line 60: @@
 =Related Articles=
-* [[PA Failure State System]] <br/>
+* [[PA Failure State System]]
+* [[Mototrbo and AlphaCom interfacing]]
+* [[IP station as program]]
-[[Category: INCA Stations]]
+[[Category: Discontinued Stations]]
 [[Category: IP-ARIO]]
-[[Category: Public Address]]
+[[Category: Public Address - Interfaces]]
-[[Category:Additional equipment]]
+[[Category: Additional equipment]]

Difference between revisions of "IP-ARIO"

From Zenitel Wiki