TEIV-1+: Difference between revisions

Latest revision as of 14:14, 27 November 2025

Turbine Extended IP Video Intercom with Keypad and Display
(1008317110)

Getting started

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Station specific configuration:

Audio and Video Configuration

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

Minimum firmware version: 7.4.3.0
Minimum version in ICX-AlphaCom server: 1.2.3.9

Related Information

@@ Line 1: / Line 1: @@
-{{AEIS}}[[file:TEIV-1+ Front.png|right|300px|thumb|Turbine Extended IP Video Intercom with Keypad and Display<br>(1008317110)]]
+{{ACEIS}}[[file:TEIV-1+ Front.png|right|200px|thumb|Turbine Extended IP Video Intercom with Keypad and Display<br>(1008317110)]]
 ==Getting started==
 *[[Starting Up Turbine Station|Starting up]]
-*[[Operating the TEIV-1+]]
+*[[Operating_the_TEIV-1%2B#Using_the_station|Operating the TEIV-1+]]
 ==Configuration==
-The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
+* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
+* [[Adding station to existing system (Edge)|Edge mode]]
+* [[SIP Intercom - Web Interface|SIP mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
+Station specific configuration:
+*[[Operating_the_TEIV-1%2B#Defining_PIN_code.28s.29|Defining PIN codes]]
+* [[Pin Codes (Zenitel Connect Pro)]]
-*[[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
+== Audio and Video Configuration ==
-*[[Adding station to existing system (Edge)|Edge mode]]
+* [[Audio Settings (Devices)|Audio Settings]]
-*[[SIP Intercom - Web Interface|SIP mode]]
+* [[Video Settings]]
-==Video Configuration==
-*[[TCIV+ Video Settings]]
-<!--* [[RTSP and ONVIF Settings (TCIV Station)|RTSP and ONVIF Settings]]-->
-*[[ITSV-4 (ICX-AlphaCom)]]
-*[[ITSV-5 (ICX-AlphaCom)]]
 ==Restore Factory Defaults and Software Upgrade==
@@ Line 39: / Line 39: @@
 ==Software Requirements==
-This station is fully supported as from ICX-AlphaCom version 1.2.3.9
+* Minimum firmware version: 7.4.3.0
+* Minimum version in ICX-AlphaCom server: 1.2.3.9
 ==Related Information==
@@ Line 49: / Line 50: @@
 [[Category: Turbine]]
 [[Category: Video]]
-[[Category: ONVIF]]