Difference between revisions of "IP-ARIO"
From Zenitel Wiki
(→InterCom connections) |
|||
| Line 58: | Line 58: | ||
| − | |||
| − | |||
===<u>Configuration</u>=== | ===<u>Configuration</u>=== | ||
Revision as of 23:03, 22 March 2017
The IP Audio Remote I/O (IP-ARIO) unit has a wide set of hardware functions. It can be used as:
Contents
Software Requirements
- AMC-IP version 11.2.3.1 or newer
- AlphaPro Version 11.2.3.0 or newer
License Requirements
An IP-ARIO Audio License is required in the AlphaCom when the audio part of IP-ARIO is used, i.e. when the IP-ARIO is used as PA interface or as a Mobile Radio interface. To install the license, log on to AlphaWeb:
- Select System Configuration > Licensing
- Click Insert new License Key
- Enter the key string in the Input License Key field
- Click Insert Key to install the license.
Note: If only the I/O part of the IP-ARIO is used, no license is required. The AlphaCom will automatically recognize the unit as an IP-ARIO and allow it to register without a license.
Connections
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
- IP Station Configuration - AlphaCom mode
- IP Station Configuration - SIP mode
- IP Station Configuration - Pulse mode
Advanced Network Settings
Restore Factory Defaults and Software Upgrade
Connectors, Indicators and Dimensions
Accessories
Related information
Configuration
Software Upgrade
LED Indications
Dimensions
Reset to factory settings
Additional Documentation on Zenitel.com