ECPIR-3P: Difference between revisions
From Zenitel Wiki
| Line 13: | Line 13: | ||
*[[Adding station to existing system (Edge)|Edge mode]] (*) | *[[Adding station to existing system (Edge)|Edge mode]] (*) | ||
**[[Direct Access Key & Ringlist Settings (Edge)]] | **[[Direct Access Key & Ringlist Settings (Edge)]] | ||
*[[SIP Intercom Configuration| | *[[SIP Intercom - Web Interface|SIP mode]] (**) | ||
**[[Direct Access Key & Ringlist Settings (SIP)]] | |||
*[[IP Station Configuration - Pulse mode|Pulse mode]] (**) | |||
**[[Direct Access Key & Ringlist Settings (Pulse)]] | **[[Direct Access Key & Ringlist Settings (Pulse)]] | ||
:(*) Edge is supported from firmware version 5.0 | :(*) Edge is supported from firmware version 5.0 | ||
Revision as of 13:38, 30 June 2022
Getting started
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
- AlphaCom mode
- ICX-AlphaCom mode
- Edge mode (*)
- SIP mode (**)
- Pulse mode (**)
- (*) Edge is supported from firmware version 5.0
- (**) SIP and Pulse mode is fully supported as from firmware version 4.7
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Software Release Notes
Connectors, Indicators and Dimensions
Accessories
| File:1023201008.png | 
|
|
|
|
| EBMDR-8 | MB-30G | PAM1H | EMBR-1 | EMBR-2 |
Software Requirements
This station is fully supported as from AlphaCom version 11.2.3.11