IP-ARIO

The IP Audio Remote I/O (IP-ARIO) unit has a wide set of hardware functions. It can be used as:

Software Requirements

• AMC-IP version 11.2.3.1 or newer
• AlphaPro Version 11.2.3.0 or newer

License Requirements

An IP-ARIO Audio License is required in the AlphaCom when the audio part of IP-ARIO is used, i.e. when the IP-ARIO is used as PA interface or as a Mobile Radio interface. To install the license, log on to AlphaWeb:

• Select System Configuration > Licensing
• Click Insert new License Key

• Enter the key string in the Input License Key field
• Click Insert Key to install the license.

Note: If only the I/O part of the IP-ARIO is used, no license is required. The AlphaCom will automatically recognize the unit as an IP-ARIO and allow it to register without a license.

Connections

• IP-ARIO connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

• IP Station Configuration - AlphaCom mode
• IP Station Configuration - SIP mode
• IP Station Configuration - Pulse mode

Advanced Network Settings

• VLAN (IEEE 8021Q)
• Network Access Control (802.1X)

Restore Factory Defaults and Software Upgrade

• Reset to factory settings
• Software Upgrade
• Automatic Software Upgrade (SIP mode only)

Connectors, Indicators and Dimensions

• Board Connectors
• Station LED Indications
• PCB LED Indications
• Dimensions

Accessories

• Back box flush mount - 1008098100
• Back box on wall mount - 1008098000

Related information

• Additional Documentation on Zenitel.com

---

Configuration

• IP-ARIO Configuration
• VLAN (IEEE 8021Q)
• Network Access Control (802.1X)
• Noise Reduction

Related Articles

• PA Failure State System