ECPIR-3P

Exigo call panel (1023200033)

Getting started

• Starting up

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

• ICX-AlphaCom mode
• Edge mode
• SIP mode

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Station specific configuration for the ECPIR:

• Configuration for Expansion Module EBMDB-8
• Direct Access Key & Ringlist Settings (Edge)
• Direct Access Key & Ringlist Settings (SIP)

Restore Factory Defaults and Software Upgrade

• Restore Factory Defaults
• Upgrade via the station web interface
• Upgrade using the IMT tool
• Automatic Software Upgrade (SIP mode only)
• Software Release Notes

Connectors, Indicators and Dimensions

• Device Connections
• Station Indication LEDs
• Dimensions

Accessories

EBMDR-8	MB-30G	PAM1H	EMBR-1	EMBR-2

Software Requirements

This station is fully supported as from AlphaCom version 11.2.3.11

• Edge mode is supported from firmware version 5.0
• SIP (and Pulse) mode is fully supported as from firmware version 4.7

Related Information

• Additional Documentation on Zenitel.com