TKIE-2: Difference between revisions

Latest revision as of 16:24, 3 January 2025

TKIE-2 VoIP Kit (1008132020)

The TKIE-2 is the extended version of our Turbine Kit range. It offers the same high quality audio as the TKIS-2 Kit, but adds to the feature list with an extra RJ45 port for dual Ethernet connectivity, dual relays, and a header for easy connection of audio accessories. The TKIE-2 supports Line-In.

In general Zenitel offers a number of IP based kits, which can be used for a wide range of applications. See the kit comparison chart.

Getting started

Starting up

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

This station is fully supported as from AlphaCom version 11.2.3.11

Related Information

@@ Line 1: / Line 1: @@
-{{AEIPS}}[[file:TKIE-2-newZ.png|thumb|400px|TKIE-2 VoIP Kit (1008132020)|alt=]]
+{{ACEIS}}[[file:TKIE-2-newZ.png|thumb|400px|TKIE-2 VoIP Kit (1008132020)|alt=]]
 The '''TKIE-2''' is the extended version of our Turbine Kit range. It offers the same high quality audio as the [[TKIS-2]] Kit, but adds to the feature list with an extra RJ45 port for dual Ethernet connectivity, dual relays, and a header for easy connection of audio accessories. The TKIE-2 supports Line-In.
@@ Line 8: / Line 8: @@
 ==Configuration==
-The TKIE kit can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
 * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 * [[Adding station to existing system (Edge)|Edge mode]]
 * [[SIP Intercom - Web Interface|SIP mode]]
-* [[IP Station Configuration - Pulse mode|Pulse mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
 ==Restore Factory Defaults and Software Upgrade==
 *[[TKIE Restore Factory Defaults|Restore Factory Defaults]]
 *[[Turbine Software Upgrade|Upgrade via the station web interface]]