Difference between revisions of "Message Formats (Sortable)"
From Zenitel Wiki
(Added $SEB (0x00b1)) |
|||
Line 122: | Line 122: | ||
|- | |- | ||
| [[COPY_MAIL ]] || align=center | CPYM || align=center | 0x0083 || Send a copy of a mail in own queue to a new destination (station or group) | | [[COPY_MAIL ]] || align=center | CPYM || align=center | 0x0083 || Send a copy of a mail in own queue to a new destination (station or group) | ||
+ | |- | ||
+ | | [[D2S]] || align=center | CPYM || align=center | 0x00B4 || Send key press to a AlphaCom registered SIP station. | ||
|- | |- | ||
| [[DELETE_MAIL ]] || align=center | DELM|| align=center | 0x0034 || Delete a mail entry in the queue for an intercom station | | [[DELETE_MAIL ]] || align=center | DELM|| align=center | 0x0034 || Delete a mail entry in the queue for an intercom station | ||
Line 154: | Line 156: | ||
|- | |- | ||
| [[DTMF_CONN]] ||align=center| ||align=center| 0x0097 || Generate DTMF tone during conversation (Only during conversation with RingMaster) | | [[DTMF_CONN]] ||align=center| ||align=center| 0x0097 || Generate DTMF tone during conversation (Only during conversation with RingMaster) | ||
+ | |- | ||
+ | | [[DISPLAY_TEXT_ST|DTS]] ||align=center| ||align=center| 0x00B2 || Update display text on station. | ||
|- | |- | ||
| [[DUMMY ]] || align=center | || align=center | 0xFFFE || Test message: Should be routed, accepted and ignored | | [[DUMMY ]] || align=center | || align=center | 0xFFFE || Test message: Should be routed, accepted and ignored | ||
Line 276: | Line 280: | ||
|- | |- | ||
| [[RCO_CHANGED ]] || align=center | RCOC|| align=center | 0x0085 || New RCO state reported from the exchange | | [[RCO_CHANGED ]] || align=center | RCOC|| align=center | 0x0085 || New RCO state reported from the exchange | ||
+ | |- | ||
+ | | [[REC]] || align=center | || align=center | 0x00B3 || Start and Stop recording (Recording on demand) | ||
|- | |- | ||
| [[REQ_TRANSF ]] || align=center | || align=center | 0x002D || Response to the SET_REQ_TRANSF and GET_REQ_TRANSF messages | | [[REQ_TRANSF ]] || align=center | || align=center | 0x002D || Response to the SET_REQ_TRANSF and GET_REQ_TRANSF messages |
Revision as of 08:44, 30 April 2013
Message | Short name | Message no, Hex | Description |
---|---|---|---|
ABSENCE_STATUS | 0x002A | Response to SET_ABSENCE and GET_ABSENCE messages | |
ALARM_MSG | ALRM | 0x0007 | Set up (or disconnect) an ASVP Alarm message to a single station or a predefined group of stations |
ALARM_MSG_ACK | 0x0009 | Positive response to ALARM_MSG | |
AUDIO_CH_DISCON | 0x8012 | Disconnect a audio channel after loopback test | |
AUDIO_CH_FAULTY | 0x8013 | Response to AUDIO_CH_LOOPBACK_REQ: Requested channel was faulty | |
AUDIO_CH_LOOPBACK_ACK | 0x8011 | Positive acknowledge of AUDIO_CH_LOOPBACK_REQ | |
AUDIO_CH_LOOPBACK_REQ | 0x8010 | Request for loopback audio connection. Used by the Audio Channel Testing process | |
AUDIO_CH_TONE_REQ | 0x8015 | Request a peer exchange to put a 500Hz tone on a audio channel | |
AUDIO_CODEC | 0x801D | Message sent in the direction of start node, from end node or trans-coding nodes along the path | |
AUDIO_DETECT | VOX | 0x0053 | Triggers the event Simplex_Conference_Audio |
AUDIO_LINK_NOT_AVAILABLE | 0x8006 | Response to AUDIO_PATH_SETUP from next node: Channel not granted | |
AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
AUDIO_LINK_RELEASE | 0x8005 | Used to release audio path backwards stepwise from node to node when setup meets busy or faulty link | |
AUDIO_M_FEED_REQ | 0x801A | Global Simplex Conference: Some station is pressing the M-key when participating in a conference | |
AUDIO_M_FEED_STOP | 0x801B | Global Simplex Conference: The station is releasing the M-key | |
AUDIO_M_LINK_OK | 0x8019 | Per hop positive response to AUDIO_M_PATH_SETUP | |
AUDIO_M_PATH_BACKTRACK | 0x8018 | AUDIO_M_PATH_SETUP failed | |
AUDIO_M_PATH_OK | 0x8017 | Contains statuses for an AUDIO_M_PATH_SETUP from one or more destination exchanges | |
AUDIO_M_PATH_SETUP | 0x8016 | Communication in a multi-node network | |
AUDIO_PATH_CHECK_OK | 0x800F | Positive response to CHECK_AUDIO_PATH | |
AUDIO_PATH_DELAY | 0x8007 | Set Duplex switch delay | |
AUDIO_PATH_DISCONNECT | 0x8006 | Release the endtoend audio path. Normal disconnect from source or destination | |
AUDIO_PATH_OK | 0x8002 | End to end message: Audio path is ready | |
AUDIO_PATH_SETUP | 0x8001 | Set up audio path between a source node and a destination node (possibly via transit nodes) | |
AUDIO_PATH_STATE | 0x801E | SIP Response to AUDIO_PATH_SETUP | |
AUDIO_RTP_DTMF_DIGIT | 0x8021 | Rfc4733 RTP digit event send or receive | |
AUDIO_RTP_DTMF_SETUP | 0x8020 | Set up reception of rfc4733 digit events in RTP. | |
BUILD_GLOB_GRP | 0x0070 | Broadcast message to all exchanges to make them rebuild global group indexes | |
C_KEY | C | 0x0058 | Order station to press C-key |
CAC | 0x00A9 | Cancel All Conversations | |
CALL_SETUP | CALL | 0x0008 | Sets up a conversation between two users |
CALL_STATUS_BC | 0x0040 | Broadcast message telling the status of a call | |
CALL_TRANSFER | TRF | 0x0044 | Set or remove call transfer for a station |
CALL_TRANSFER_NOK | 0x0046 | Negative response to CALL_TRANSFER | |
CALL_TRANSFER_OK | 0x0045 | Positive response to CALL_TRANSFER | |
CANCEL_MAIL | CANM | 0x0065 | Delete one or more mail/call request/alarm messages queued at a station |
CDC_CMD | 0x009F | Used for Billing ABSD->AMCD | |
CDC_STATE | 0x009E | Used for Billing AMCD->ABSD | |
CFG_UPD | 0x00A1 | Signal update of configuration tables. | |
CHECK_AUDIO_PATH | 0x800E | Check of established audio path at regular intervals | |
CLEAR_RCO | CLR | 0x0015 | Turn the given remote control output off |
CLEAR_RCO_FAILED | 0x0017 | Negative response to the CLEAR_RCO message | |
CLEAR_RCO_OK | 0x0016 | Positive response to the CLEAR_RCO message | |
COMMAND_RESPONSE | 0x0066 | General response message to messages | |
CONN_2_GROUP | C2G | 0x00B0 | Connect the audio from a group to the speaker of the group |
CONF_IS_ROOT | 0x007B | Broadcast message. Sender informs that it is root of conference | |
CONF_JOIN | 0x0078 | Exchange wants to join conference, asks root-exchange to setup connection back to sender | |
CONF_MEMB_CHK | 0x0079 | Ask whether any neighbor exchange has any ordinary member left in conference | |
CONF_NOT_ROOT | 0x007C | Broadcast message. Sender informs that it is no longer root of conference | |
CONF_ORD_MEMB | 0x007A | An exchange tells its neighbors that it has ordinary member left in conference | |
CONF_TALK | 0x008B | Set Simplex conference speaker | |
CONF_TALK_STOP | 0x008C | Stop station form feeding Simplex conference | |
CONN_REF_ACK | 0x000E | The external application acknowledges the CONN_REFERENCE | |
CONN_REFERENCE | 0x000B | Positive response from the exchange to CONN_REQUEST | |
CONN_REQUEST | CONN | 0x000A | Sets up a coversation between two users |
CONN_STATUS_BC | 0x0041 | Broadcast message telling that a connection is established | |
CONSOLE_DISC | 0x007F | Log off from system debug console (TST) | |
CONSOLE_REQ | 0x007E | Log on to system debug console (TST) | |
COPY_MAIL | CPYM | 0x0083 | Send a copy of a mail in own queue to a new destination (station or group) |
D2S | CPYM | 0x00B4 | Send key press to a AlphaCom registered SIP station. |
DELETE_MAIL | DELM | 0x0034 | Delete a mail entry in the queue for an intercom station |
DELETE_MAIL_ACK | 0x0035 | Response to the DELETE_MAIL message | |
DEVICE_INFO | 0x003B | Response to the GET_DEVICE message | |
DIAL_DAK | 0x0094 | Dial DAK on a station | |
DIAL_DIGITS | DD | 0x0050 | Simulate digit dialing from a station |
DIGIT_RELEASE | DREL | 0x0052 | The station has released a digit press |
DIP_FWD | DIP | 0x00A0 | Send DIP messages to IP stations |
DISC_REQ | 0x0011 | Conversation established with CONN_REQUEST: The external application disconnects a conversation. | |
DISC_REQ_ACK | 0x0012 | Conversation established with CONN_REQUEST: The AlphaCom acknowledges the DISC_REQ message | |
DISCON_ST | 0x008E | Disconnect station from ongoing feature | |
DISCON_STATUS_BC | 0x0042 | Broadcast message telling that a connection is disconnected. | |
DISCONNECTED | 0x000F | Conversation established with CONN_REQUEST: Conversation was disconnected, e.g. the user pressed C-key | |
DISCONNECTED_ACK | 0x0010 | Conversation established with CONN_REQUEST: Acknowledge of the DISCONNECTED message | |
DISPLAY_TEXT | DSPL | 0x005A | Send text and control characters to a station |
DPMT_INVALID | 0x0000 | Reserved value for internal use | |
DTMF_CONN | 0x0097 | Generate DTMF tone during conversation (Only during conversation with RingMaster) | |
DTS | 0x00B2 | Update display text on station. | |
DUMMY | 0xFFFE | Test message: Should be routed, accepted and ignored | |
EC_STATE | 0x0093 | Update remote node of the Echo Canceler state of station. | |
EVENT_REPORT | ER | 0x0067 | Report an event to the event/action system |
EXECUTE_COMMAND | X | 0x004F | Send a command string to the exchange to be executed there |
EXT_FEATURE_BC | 0x0043 | Broadcast message when a directory number (feature 50) is dialed on a station | |
EXT_MAIL | 0x0030 | Response to the GET_x_MAIL messages | |
GET_ABSENCE | GABS | 0x0029 | Get absence status for an intercom station |
GET_DEVICE | GDEV | 0x003A | Get information from an external device |
GET_FIRST_MAIL | 0x002E | Get the first mail entry in the queue for an intercom station | |
GET_LAST_MAIL | 0x0064 | Get the last mail entry in the queue for an intercom station | |
GET_NEXT_MAIL | 0x002F | Get the next mail entry in the queue for an intercom station | |
GET_PIN_COUNTS | GPC | 0x0013 | Query a RIO about number of output and input pins and support for non mandatory features |
GET_PREV_MAIL | 0x0063 | Get the previous mail entry in the queue for an intercom station | |
GET_REQ_TRANSF | 0x002C | Get the Call Request Transfer status for an intercom station | |
GET_SYSTEM_TIME | GTS | 0x0025 | Ask a device (AlphaCom) for date and time |
GET_THIS_MAIL | 0x004A | Get the identified mail entry in the queue for an intercom station | |
GLOB_GRP_MEMB | 0x006A | A exchange tells which global groups this exchange is member of by broadcasting this to all exchanges | |
GROUP_MEMBERSHIP | GRM | 0x0081 | Set group membership in NVRAM for a station |
GROUP_MSG | GM | 0x00A6 | Start SVP message playback to group |
GROUP_MSG_STOP | GMS | 0x00A7 | Stop SVP message playback to group |
HANDSET_OFF | HOFF | 0x0056 | Order station to lift handset |
HANDSET_ON | HON | 0x0057 | Order station to replace handset |
HS_SIDE | 0x00A2 | Turn handset sidetone on/off | |
ILLEGAL_PARAM | 0x0023 | Negative response | |
LOG_STRING | LOG | 0x0075 | Output String to System Log |
LOOPBACK_IMPOSSIBLE | 0x8014 | Response to AUDIO_CH_LOOPBACK_REQ | |
M_KEY | M | 0x0054 | Order station to press M-key |
M_KEY_RELEASE | MREL | 0x0055 | Order station to release M-key |
MAILQ_NAVIG | 0x008D | Do operation on mail queue, or step current mail in mail queue | |
MODIFY_COS_CONTENTS | MCC | 0x0091 | Modify feature membership in COS in NVRAM |
MVO | 0x00A8 | Mask volume and handset override ON/OFF | |
NAME_EXTENSION | 0x0080 | Special exchange mode using two line names: Send the second line through AlphaNet | |
NO_ACCESS | 0x003F | Negative response to CONN_REQUEST | |
O_DUPL_CONF | ODC | 0x006F | Include/exclude a station or a group into/from an Open Duplex Conference |
OD_CONF_ENTERED | 0x0076 | The participant has entered an Open Duplex Conference | |
OD_CONF_LEAVE | 0x0071 | The participant has left the Open Duplex Conference | |
PA_CMD | 0x00AE | Acknowledge and remove IP-ARIO PA failure states. | |
PARK_INQ_BROKER | INQ | 0x0086 | Park station from conversation, enter Inquiry call state |
PAR_RING | 0x0098 | Add a Parallel Ringer station to a call in ringing state | |
PIN_COUNTS | 0x0014 | Response to the GET_PIN_COUNTS message | |
PING | 0x003C | Test device: “Are you there?” | |
PLAY_DAK | PD | 0x009C | "Dial sequence" for playback. |
POLL_RCI | POLL | 0x001D | Poll the given remote control input once |
PONG | 0x003D | Response to the PING message. “Yes, I’m here.” | |
PROG_CONF | CONF | 0x0004 | Set Simplex conference for predefined group of stations or a single station |
PROG_CONF_ACK | 0x0006 | Positive response to PROG_CONF | |
PROG_CONF_NAK | 0x004E | Negative response to PROG_CONF | |
PROGRAM | PROG | 0x0001 | Set audio program for single station or a predefined group of stations |
PROGRAM_ACK | 0x0003 | Positive response to PROGRAM | |
PROGRAM_NAK | 0x004D | Negative response to PROGRAM | |
PULSE_RCO | PULS | 0x001B | Generate a pulse with the defined length |
PULSE_RCO_FAILED | 0x0022 | Negative response to the PULSE_RCO message | |
PULSE_RCO_OK | 0x001C | Positive response to the PULSE_RCO message | |
PUT_STRING | 0x0073 | Output String to Exchange serial port after adding appropriate framing depending on selected port | |
Q_ELEM_ADDED | 0x004B | Broadcast message. Reports that a mail message has been added to a station’s mail queue | |
Q_ELEM_REMOVED | 0x004C | Broadcast message. Reports that a mail message has been removed from a station’s mail queue | |
R_KEY | 0x00A4 | R_KEY signal | |
RCI_CHANGED | RCIC | 0x0084 | New RCI state reported from the exchange |
RCI_IS_OFF | 0x001E | Response to the POLL_RCI and SCAN_RCI_ONCE messages, input pin is off | |
RCI_IS_ON | 0x001F | Response to the POLL_RCI and SCAN_RCI_ONCE messages, input pin is on | |
RCO_CHANGED | RCOC | 0x0085 | New RCO state reported from the exchange |
REC | 0x00B3 | Start and Stop recording (Recording on demand) | |
REQ_TRANSF | 0x002D | Response to the SET_REQ_TRANSF and GET_REQ_TRANSF messages | |
REQ_TRANSF_CALL | TRFC | 0x0088 | Transfer call in an Inquiry Call situation. |
RESET_AUDIO_LINK | 0x8000 | Reset audio link between nodes | |
RESET_DEVICE | RESET | 0x0039 | Reset a device |
RESET_TAKEN | RSST | 0x0038 | A device reports that it has done an internal reset |
RESOURCE_BUSY | 0x003E | Negative response to CONN_REQUEST | |
ROUTE_ALPHAPRO_MSG | 0x006E | Send AlphaPro message via AlphaNet to/from a remote node | |
SCAN_END_ACK | 0x0024 | Acknowledgment to the RCI_IS_OFF and RCI_IS_ON messages | |
SCAN_RCI_ACK | 0x0021 | Positive response to the SCAN_RCI_ONCE message | |
SCAN_RCI_ONCE | SCAN | 0x0020 | Scan input until defined condition is met, then report to exchange |
SEND_MAIL | SM | 0x0031 | Send a mail message to an intercom station |
SEND_MAIL_ACK | 0x0033 | Response to the SEND_MAIL and SEND_TEXT_MAIL messages | |
SEND_TXT_MAIL | STM | 0x0032 | Send a mail message with free text to an intercom station |
SET_ABSENCE | SABS | 0x0028 | Set absence status for an intercom station |
SET_CALL_REQ_MODE | SCRM | 0x006C | Turn on/off message “your call is registered, please wait”, then ringing/flashing at a station |
SET_DIRNO_TXT | SDT | 0x0077 | Change the display text of a directory number (station or feature) |
SET_GRP_FILT | GFLT | 0x007D | Set group call filter for a station |
SET_IPRCO | 0x00AD | Set a physical RCO on IP station or IP-ARIO | |
SET_LOGICAL_RCO | SLRC | 0x006B | Set or clear a logical RCO |
SET_MAIL_TIMEOUT | SMT | 0x0082 | Set the timer of a mail queue entry |
SET_NODE_NUMBER | 0x006D | Change the node number of an exchange | |
SET_RCO | SET | 0x0018 | Turn the given remote control output on |
SET_RCO_FAILED | 0x001A | Negative response to the SET_RCO message | |
SET_RCO_OK | 0x0019 | Positive response to the SET_RCO message | |
SET_REQ_TRANSF | SCRT | 0x002B | Set transfer of Call Request for an intercom station |
SET_STATION_COS | SSC | 0x0090 | Set COS membership in NVRAM for a station |
SET_SIMPLEX | SIMP | 0x00A3 | Set conversation in simplex |
SET_SYSTEM_TIME | SST | 0x0027 | Set the internal clock to the given date and time |
SET_TIMER | ST | 0x008F | Start or stop a timer |
SINGLE_DIGIT | DIG | 0x0051 | Dial one digit on a station |
SNV | SNV | 0x0095 | Update specific system settings (NVRAM) values |
ST_AUDIO_OPT | 0x00AB | Control audio options of station in connection. | |
ST_BUSY_BC | 0x0036 | Broadcast message: Intercom station is busy | |
ST_FREE_BC | 0x0037 | Broadcast message: Intercom station is free | |
ST_GROUP_DISCON | SGD | 0x0074 | Switch off Group Call audio at a station that receives Group Call audio at the moment |
STATION_EVENT_BLOCK | SEB | 0x00B1 | Allow blocking of events from IP station |
STATION_BUSY | 0x000D | Negative response to CONN_REQUEST. | |
STATION_CONVERSATION | 0x0060 | Message from remote exchange. Set station in conversation mode. Stop tone and open mic. | |
STATION_DOWN | 0x000C | Negative response to CONN_REQUEST | |
STATION_INFO | 0x801F | SIP update of number and display text | |
STATION_LISTEN | 0x0061 | Message from remote exchange. Set station in listen mode. Shut mic | |
STATION_TRANSFER | 0x0062 | Message from remote exchange: Transfer of B subscriber. | |
STATUS_REPORT | 0x0072 | Report equipment Presence and Error/OK status | |
SVP_ST | 0x00AC | Start playback of a message during conversation | |
SYNC_FLASH | 0x00A5 | Dump local database to flash file system | |
SYSTEM_TIME | 0x0026 | Response to the GET_SYSTEM_TIME and SET_SYSTEM_TIME message | |
TEMP_PROG | TPROG | 0x0096 | Temporarily "mute" program distribution to a station |
UNPARK | 0x0087 | Unpark station from Inquiry call state station, return to conversation | |
UPD_MAIL_TIMEOUT | 0x009D | Used for Ringing Group to update mail timeout in AlphaNet | |
VCP_MEET_REQ | 0x0069 | Request answer to global group call | |
VOIP_AUDIO_CONFIG | VAC | 0x00AF | Configure the RTP stream station |
VOL | 0x009B | Set station volume | |
WAKE_UP | 0x0047 | Register or remove wakeup request | |
WAKE_UP_ACK | 0x0048 | Positive response to WAKE_UP | |
WAKE_UP_NAK | 0x0049 | Negative response to WAKE_UP | |
WRITE_USER_DEF_DATA | WUDD | 0x008A | Write User Defined Data (UDD) |