Main Page

Welcome to AlphaWiki everything you need to know about STENTOFON AlphaCom. 1,960 articles in English

Software Hardware Features

AlphaNet MultiModule Event Handler

AlphaPro SIP Stations

Applications FAQ Release notes

AlphaWiki User's Guide

All categories

AlphaCom XE The AlphaCom XE combines the best of the present advanced AlphaCom system with the latest IP, Linux and embedded networking technologies. When entering the IP world, no compromise has been made. The AlphaCom E provides the complete set of existing services, quality, reliability and security characteristics for which AlphaCom has always been recognized. Some of the special features it brings into the IP domain are wideband (7 kHz) audio, a built-in firewall, integrated Web and SIP server, and low latency switching. Several exchanges can be interconnected on AlphaNet over IP, as well as traditional methods, both locally and worldwide. All communication and services are available throughout the entire network. The AlphaCom XE Exchanges includes extended integration of different kinds of communication and alarm systems, access control, CCTV, public address, public telephones and a variety of features and solutions that can be added when desired. It is easy to interface to 3rd party systems to create special applications. The new technology allows remote programming, logging and maintenance via AlphaPro, Syslog and standard web browsers. What's new SOFTWARE The latest software versions are available on the download page IP Station version 01.10.3.8. This software runs on both IP substations and IP master stations. Main new features (since 01.09.3.3): Added possibility to adjust mic sensitivity from the web interface. Added possibility to register to an alphacom using directory number instead of MAC address. The directory number can be defined both from the web interface and local menu (Stations with display). The Off-line password is now configurable from the IP station web interface. The handset volume can now be configured different from the speaker volume. Configuration of handset volume is done by configuring the volume while the handset is lifted. It is now possible to upgrade with VLAN. If "IP-station upgrade with VLAN" is set to yes and VLAN is enabled, the IP-station will send tagged packets during upgrade. For a complete list of bug fixes and functional changes and enhancements, see IP Station release notes Upgrade the IP stations according to the IP Station upgrade procedure AlphaCom XE: version 11.1.3.3. Note that AMC 11 software also can be used on the red AMC-IP boards after first having done an image upgrade. News since 10.60.3.14: Audio Messaging feature providing new and powerful voice messaging services Recall feature for delayed announcement to prevent feedback Auto-attendant feature providing voice guided menus for handling incoming calls Easier IP Station configuration: IP Stations can register on the directory number instead of the MAC address It is now possible to label the function keys of the IP Master station Basic setting for stations can now be configured from AlphaWeb (Edit number, name, volume and Noise Reduction level) Event Handler: New macros LOOP/ENDLOOP, BREAK, %ges and %dfmt Event Handler: Added PA subevents on the Conversation Outgoing event Event Handler: SIP call progress event trigger for outgoing calls to SIP trunks New data protocol message GROUP_MSG to set up prerecorded voice message to a local or global group call New data protocol message SVP_ST for playback of stored voice message to one station in a conversation AlphaCom E: version 10.60.3.14. Some new features (since 10.56): The display backlight in IP stations will be off in idle, and switched on whenever the station is in use. The backlight in CRM-V will not be turned off in idle. SIP: SIP trunks/stations now support the RFC2833 standard digit signalling system SIP port can be configured from nvram Allow AGA cards used as AlphaNet in E7 card position 1-3. All 6 board positions in AlphaCom E7 can now be configured with AlphaNet audio on AGA cards CRM-V: CRM-V license handling and DAK module support Option for Notification tone on CRM-V when receiving call request New Call Statistics Log System. Changed text and behaviour of the "statistics" call log. Call log now contains all incoming and outgoing calls. Option to inhibit AlphaPro configuration from AlphaNet New 4 digit software version system For a complete list of bug fixes and functional changes and enhancements, see AMC-IP Release Notes How to ugrade: AMC-IP software upgrade procedure AlphaPro version 11.1.3.1. New features (since 10.56): Included an option to tear down TCP connection after data is sent (Serial Ports settings) Implemented "Defragment Action Strings Table" function Implemented Parameter 3 in Directory Number Table Added Directory numbers related to the Audio Messaging Features Added feature 105 and feature 109 to COS 15 For a complete list of bug fixes and functional changes and enhancements, see AlphaPro release notes

AlphaPro AlphaPro is the programming tool for the AlphaCom exchange. AlphaPro gives the facility to program the features of the exchange off-line, and at a later stage download this programming into the exchange. AlphaPro does not extend the features of the exchange, it fills in the appropriate tables. AlphaPro gives the facility to program the features of the exchange off-line, and at a later stage upload this programming into the exchange. AlphaPro is actually two software programs, one FoxPro database application (the big, central window) and one C-code communication program called WACS (the small window on top). AlphaWeb The AlphaWeb is an embedded web server running on the AlphaCom E exchange. It allows the users to log using a standard web browser such as Internet Explorer, Mozilla Firefox, Opera or Netscape to operate and manage the AlphaCom system. Event Handler The AlphaCom exchange is an intercom exchange of which the main task is to enable uni- and bi-directional speech. In order to be able to meet as many customer requirements as possible when it comes to special features an Event Handler has been implemented. The underlying idea is that by customer-programming this event handler functionality can be implemented which is not part of the standard feature list. The event handler is unique in the world of intercom. It is what gives the exchange its flexibility and makes it possible to meet most, if not all, customer requirements. The Event Handler is based on the software concept that when the intercom functions run, they report 'events' to a part of the software called the Event Handler. The event can be described as a trigger that sets off an action in the system depending on the information entered in AlphaPro, the programming tool for the AlphaCom exchange. In this way, the Event Handler provides a powerful engineering tool for configuring system behaviour to meet requirements from customers.