Search results

Create the page "Event Handler applications" on this wiki! See also the search results found.

• Answer call requests by pressing M-key
  ==Event Handler== This is done using the [[Event Handler]]. Select '''Exchange & System''' from the top menu in [[AlphaPro]]:
  1 KB (166 words) - 11:12, 8 July 2022
• Answer call requests by lifting the Handset
  ==Event Handler== This is done using the [[Event Handler]]. Go to Exchange & System from the top menu in [[AlphaPro]]:
  982 bytes (148 words) - 13:48, 31 May 2022
• Pulsing of RCO (Event Handler)
  The stations dial an Event Trigger number ([[Event Trigger with cancel tone feature|feature 85]]), say number 9533, to pulse t ...nts|Exchange and System -> Events]], press Insert and create the following event:
  775 bytes (106 words) - 11:34, 8 July 2022
• Voice Paging from IP Substation
  ==Event Handler== Use the event handler (Exhcange&System->Events) to create this event:
  1 KB (240 words) - 16:20, 31 May 2022
• Simplex conversation (Event Handler)
  This event will set the whole exchange in simplex (Press To Talk) mode. Simplex mode w ...nts|Exchange and System -> Events]], press Insert and create the following event:
  1 KB (175 words) - 11:37, 8 July 2022
• OWN - Modify Event Owner (%1) and/or Related To (%2) values
  ...the "Event Owner" or the "Related To" parameter. It can be useful in some applications, especially in [[RCI]] strings were there by default is no parameters. The OWN 101 – sets the event owner to dir.no. 101
  761 bytes (117 words) - 16:16, 4 October 2019
• Empty a group (Event Handler)
  Here dialing the event trigger 9534 will remove all members of group 48. ...nts|Exchange and System -> Events]], press Insert and create the following event:
  873 bytes (122 words) - 11:35, 8 July 2022
• Delayed Call
  The Delayed Call functionality is controlled by the [[Event Handler]], which is configured from [[AlphaPro]]. '''Event 1''' - When the call button (Subevent = 1) is pressed (=ON), start a 3 seco
  1 KB (218 words) - 11:21, 8 July 2022
• Door Opening using Dummy Number (Event Handler)
  Use the two-step event trigger, [[Event trigg on dialing digits|feature 105]]. ...nts|Exchange and System -> Events]], press Insert and create the following event:
  1 KB (194 words) - 11:14, 8 July 2022
• Timeout of conversation (Event Handler)
  '''Event 1''' '''Event 2'''
  1 KB (188 words) - 11:32, 8 July 2022
• Call restriction from guard station to cell station (Event Handler)
  Use the event type “[[Call Requester Mode (Event Type)|Call Requester Mode]]” on the cell stations to set/reset call forwa ...:''' Set transfer to 'dummy' number 345 when not in [[Call Requester Mode (Event Type)|Call Requester Mode]].
  2 KB (225 words) - 11:36, 8 July 2022
• Increased volume on ringing signal
  ...rivate Ringing mode (Event Type)|9 - Private Ringing mode]] in the [[Event Handler]], one can change the volume during the ringing, and set it to a normal lev ...nts|Exchange and System -> Events]], press Insert and create the following event:
  2 KB (320 words) - 11:22, 8 July 2022
• %udd
  The '''%udd''' macro is used in the [[Event Handler]] to read the value of an [[UDD]] (User Defined Data variable). [[Event_Han ...turns the content of UDD variable in indexed by the physical number of the event 'Owner'''
  1 KB (192 words) - 09:50, 4 October 2019
• Call Pickup (Event Handler)
  ...ation. 9535 must be defined as [[Event Trigger with parameter (Event Type)|Event Trigger with parameter]], feature 95. '''Event 1''' - When a station is called, store the directory number of the calling
  2 KB (250 words) - 13:48, 14 December 2023
• Delayed Reporting of Line Errors
  ...ult reporting, and how to use customized error reporting using the [[Event Handler]] instead. == Configure Station Error reporting in Event Handler ==
  3 KB (412 words) - 14:02, 31 May 2022
• Group Call - PTT function
  == DAK event == In the [[Event Handler]], the event 30 (Station Input or Station DAK key) is triggered when a DAK Key is presse
  1 KB (197 words) - 14:24, 31 May 2022
• Event Trigger with parameter (Event Type)
  The event type 25 is triggered by a so-called "two-step" event trigger. There are two different types, one which waits for a complete dire * [[Event Trigger w/User Parameter|Feature 95]] (Default 9535): Dial 9535 + dir no
  4 KB (589 words) - 10:28, 30 March 2023
• Station Fault (Event Type)
  ==Event description== |width="200pt"|'''Event Owner''':
  2 KB (251 words) - 10:48, 9 February 2023
• Door opening of Ring Master stations from AlphaCom
  Door opening of Ring Master stations from AlphaCom is configured by using [[Event During Connection]] and DP message [[DTMF_CONN]] [[Event During Connection]] configured as directory number "6" (Door opening)
  1 KB (167 words) - 10:47, 1 June 2022
• Missed calls
  ...andard feature for displaying '''Missed calls''', but by using the [[Event Handler]], one can create such function. ...phaPro, select '''Exchange & System''' > '''Events''', and '''Insert''' an event with the following properties:
  1 KB (160 words) - 14:30, 31 May 2022
• CRM: Indicate status of remote stations in AlphaNet
  ...s reporting conference membership. The event type [[Conversation Outgoing (Event Type)|08 - Conversation Outgoing]] is triggered when a station is talking i ...Room Station is located. This event report message will in turn trigger an event in the node with the Control Room Station, which is used to control the LED
  3 KB (422 words) - 11:30, 8 July 2022
• SIP phone: Forward unattended call
  The Event Type [[Private Ringing Outgoing(Event Type)|33 - Private Ringing Outgoing]] can be used to forward unattended SIP '''Note''' - The event type 33 require AMC 10.30 or later.
  2 KB (278 words) - 12:21, 24 February 2023
• Forward unattended Call Request (Event Handler)
  [[Category:AlphaCom Applications]] [[Category:ICX-AlphaCom Applications]]
  1 KB (189 words) - 11:32, 8 July 2022
• Play a customized audio message during ringing
  ...nts|Exchange and System -> Events]], press Insert and create the following event: ...d ringing signal should be played in the loudspeaker of the initiator this event must be used:
  2 KB (290 words) - 10:54, 5 May 2023
• Unlock intercom station with password
  ...station will be moved to a COS were all features are disabled, except the event trigger feature itself. * In AlphaPro - Directory & Features, '''Insert''' a new event trigger directory number with feature number 85, e.g. 9200.
  2 KB (336 words) - 08:04, 1 June 2022
• Wudd
  The '''WUDD''' command is used in the [[Event Handler]] to write a value to [[UDD]] (User Defined Data variable). The value is ch From AMC 11.02 alphanumeric storing from event handler is possible (not via $WUDD). Alphanumeric storing is cleared after reset.
  2 KB (282 words) - 16:19, 4 October 2019
• Modify ASVP alarm message repetitions
  ...editor in the [[TST console]] or the [[SNV|$SNV command]] from the [[Event Handler]]. ====Using the Event Handler ====
  2 KB (352 words) - 16:09, 20 July 2022
• Group Call - Increased volume
  * This event is CPU extensive. Maximum members in a group using this feature '''should n When stations outside UDP group 2 dial group call 86 this event will not be triggered, and the volume will not be altered.
  2 KB (315 words) - 15:22, 11 August 2022
• UDP group
  ...ty. An '''UDP group''' is a group of stations that are used by the [[Event Handler]] to construct rules that applies to a group of stations. There are 8 UDP g An Event Handler rule can refer to an UDP group in the condition part. Both the "owner" and
  3 KB (453 words) - 13:45, 11 May 2022
• Dynamic group call
  ...station. This is the '''Group Configuration''' button. Directory number [[Event Trigger w/User Parameter|9535]] is included in a default database. ===Event Handler configuration===
  4 KB (649 words) - 11:13, 8 July 2022
• Stream audio from 3rd party
  [[File:PCStream2.png|thumb|left|700px|Event Handler]] [[Category:AlphaCom Applications]]
  1 KB (166 words) - 14:07, 16 February 2024
• Scream Alarm
  ...n Input or Station DAK key (Event Type)|Station Input or Station DAK key]] event programmed to check a UDD before sending a [[mail]] to the Staff stations. ==Event Handler programming==
  5 KB (815 words) - 14:02, 16 November 2023
• Audio Monitoring - Listen In
  ...Step Event Trigger w/User Parameter]], 9535 (feature 95/0). The programmed event reads the dialed directory number and commands the substation to enter a co ==Event Handler programming==
  4 KB (551 words) - 10:33, 8 June 2023
• Anti-nuisance control (Event Handler)
  ...+ Substation is dialed, an [[Event_Trigger_with_parameter_%28Event_Type%29|event type 25]] is triggered and the action string [[SET_STATION_COS|$SSC L%2.dir When the timer expires it will trigger [[Event_Timeout_%28Event_Type%29|event type 21]], and the command [[SET_STATION_COS|$SSC L%1.dir U1]] will move th
  3 KB (541 words) - 09:52, 8 July 2022
• CCTV control by relays (RCO) when using Call Request
  The [[Event Handler]] is used to control the [[RCO]]'s which operate the relays. In the example '''Event 1''' - When a conversation is made from the master station to the substatio
  4 KB (600 words) - 11:12, 8 July 2022
• AudioCodes - More than 8 lines needed
  ===Create Event Trigger Number=== The number dialled by the user will actually be an Event Trigger. This must be added in the AlphaCom directory table as ''feature''
  4 KB (678 words) - 12:05, 24 February 2023
• Apartment Building Entry Point
  ==Event Handler programming== '''Event 1''' - CALL event
  5 KB (836 words) - 15:18, 6 January 2023
• MPC Data Protocol
  ...ink Layer|simple link layer]], but only for single-exchange (not AlphaNet) applications. ...it’s possible to send additional data strings from the AlphaCom’s [[Event Handler]] on this port also.
  993 bytes (157 words) - 14:24, 7 September 2017
• Page/Party Conference 1 Line
  ==Event Handler configuration== ===Call Setup event===
  4 KB (635 words) - 01:59, 2 March 2023
• HTTP string: Send from AlphaCom
  HTTP GET can be sent to third-party systems using EDO ports and Event Handler. ===Create Event===
  4 KB (557 words) - 00:56, 26 March 2024
• Situations that require System Reset
  ...f these applications is the intercom (AMCd) application. Examples of other applications are [[SIP]], [[Syslog (AlphaCom)|Syslog]], [[AlphaWeb]] (web server) and [[ * Reboot the exchange. This will restart the Linux operative system and all applications. A reboot takes approx. xx seconds in a fully equipped E7, and xx seconds i
  2 KB (344 words) - 11:22, 8 September 2017
• AlphaCom
  ...nge, designed to provide critical communications and serve a wide range of applications. <br /> * [[Event Handler]]
  1 KB (155 words) - 13:31, 15 August 2017
• Mooring Conference
  ==== Event Handler programming ==== The conference is started by dialing event trigger 9533 from the Bridge. UDD 500, which contains the current Active Us
  5 KB (837 words) - 14:35, 31 May 2022
• SoftClient
  *Control room applications: No need for an additional intercom device at the desk. Use the computers a ...e to listen to any of these services, add the following event to the Event Handler:
  3 KB (378 words) - 08:19, 5 April 2024
• FBSAR - PA interface
  ...t box, and select the button '''Events'''. Press '''Insert''' to create an event with the following parameters (here RCO 1 is used as an example): [[File:Application_A3a.png|500px|left|thumb|Event for operating the RCO]]
  3 KB (428 words) - 11:01, 1 June 2022
• Free Seating
  The '''Free Seating''' system runs on standard [[AMC]] SW using the [[Event Handler]] and the [[AlphaPro]] WACS module for swapping two users. The [[Event Handler]] is used to activate and send [[AlphaNet Data Protocol]] data messages to
  8 KB (1,173 words) - 11:31, 1 June 2022
• Door Opening - Configuration example
  ==Creating Event for Door Opening == ...list to the left. Then select the button '''Events'''. '''Insert''' a new event with the following properties:
  7 KB (1,107 words) - 11:16, 24 October 2023
• Audio Monitoring - Scanning
  * DAK1 = Leave blank in the DAK table (key press is triggering event 30) * DAK2 = Leave blank in the DAK table (key press is triggering event 30)
  9 KB (1,426 words) - 17:54, 2 February 2023
• Timed Signalling and Messaging
  The built-in [[Scheduler (Event Type)|Scheduler]] function in [[:category:ICX-AlphaCom Platform|ICX-AlphaCo Typical applications:
  5 KB (712 words) - 20:36, 22 July 2022
• Recording of conversations using Duplex Conference and AGA board
  * In order to make the [[Event Handler]] programming very general the [[AGA]] ports should be assigned directory n === Event Handler programming ===
  7 KB (1,079 words) - 11:13, 8 July 2022

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)