Deletion log
Below is a list of the most recent deletions.
(newest | oldest) View (newer 250 | older 250) (20 | 50 | 100 | 250 | 500)- 09:51, 18 August 2022 Asle (talk | contribs) deleted page Pelco - Adding ONVIF compliant Zenitel devices (content was: "{{AEIS}} This guide describes the process of adding Zenitel devices to Pelco Video Expert. It is assumed that Pelco Vid...", and the only contributor was "Lennert.werf" (talk))
- 13:27, 16 August 2022 Roarl (talk | contribs) deleted page IMT - Configure Stations (content was: "{{AEIPS}} All stations that have been upgraded to a software version which is recognized by IMT are listed on the configuration page. Recogn...", and the only contributor was "Roarl" (talk))
- 13:24, 16 August 2022 Roarl (talk | contribs) deleted page Category:VS-IMT (content was: "This Category contains documents describing the VS-IMT. Category:AlphaCom Software")
- 13:23, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Intercom Management Tool (content was: "{{AEIPS}} VS-IMT is a software tool for managing Vingtor-Stentofon IP intercoms. It is used as a tool of choice for commissioning tasks that involving a large number of IP intercoms. Key product features are '''discovery''' and '''ident...")
- 13:11, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Station Wizard (content was: "{{APS}} Run "Station Wizard" from File menu or by using "Ctrl + W" short-cut. none|thumb|249x249px The Wizard gui...", and the only contributor was "Roarl" (talk))
- 13:08, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Review Results (content was: "{{APS}} final step provides an opportunity to review the settings which have been made in the previous steps and to print out configuration...", and the only contributor was "Roarl" (talk))
- 13:08, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Troubleshooting & Technical Background (content was: "{{AEIPS}} This article provides some troubleshooting tips in case problems with the VS-IMT is encountered. == Quick troubleshooting guide == If you encounter any problems with the IMT tool, check that: * ..you are using the Downloads#...")
- 13:05, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Identify Stations (content was: "{{APS}} VS-IMT supports two-way identification of discovered IP stations by: * playing a tone on the selected station * receiving a button-p...", and the only contributor was "Roarl" (talk))
- 13:05, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Exporting and Importing Projects (content was: "{{APS}} = Overview = VS-IMT offers the possibility to export or import projects. This can be useful for making backup copies of existing...", and the only contributor was "Mihael" (talk))
- 13:05, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Discover Stations (content was: "{{APS}} The first step is to discover which stations are connected to the network. This is done by scanning the network within a defined IP...", and the only contributor was "Roarl" (talk))
- 13:04, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Crash Rescue Mode (content was: "{{APS}} == Overview == Upgrade crash handling in IMT is available in case when there was major crash on the system during upgrade was running (IMT crash/process kill, PC crash, network crash...). Main reason to have this functionality is...")
- 13:03, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Basic Intercom System Setup (content was: "{{APS}} thumb|right|500px == Overview == The procedure for deploying IP-intercom stations is # Planning your system # Discovery of intercom devices # Identification of intercom devices and assigning a directory number...")
- 13:03, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Additional intercom system configuration (content was: "{{APS}} = About Station Settings = Once a station is included in a project, it is placed on the list of stations in the main project window. When a station is selected, basic station information will be displayed in the '''Station info''...")
- 13:02, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT & Station Web Interface (content was: "{{APS}} == Standard VS-IMT Project == Once the stations are configured with VS-IMT it is recommended that the station web interface is used only for settings that are not available in VS-IMT. If it happens that the station is reconfigur...")
- 13:01, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Configure Stations (content was: "{{APS}} All stations that have been upgraded to a software version which is recognized by VS-IMT are listed on the configuration page. Recog...", and the only contributor was "Roarl" (talk))
- 12:49, 16 August 2022 Roarl (talk | contribs) deleted page IMT- Additional intercom system configuration (content was: "{{AEIPS}} = About Station Settings = Once a station is included in a project, it is placed on the list of stations in the main project windo...", and the only contributor was "Roarl" (talk))
- 10:06, 16 August 2022 Roarl (talk | contribs) deleted page Release Notes VS-Client (content was: "#REDIRECT Zenitel Client - Release Notes")
- 10:06, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT - Release Notes (content was: "= Release info = '''Name:''' VS-IMT <br> '''Description:''' VS-IMT is a software tool for managing Vingtor-Stentofon IP-intercoms. The software...", and the only contributor was "Asle" (talk))
- 10:05, 16 August 2022 Roarl (talk | contribs) deleted page Release Notes VS-IMT (content was: "#REDIRECT VS-IMT - Release Notes", and the only contributor was "Asle" (talk))
- 10:04, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Installation procedure (content was: "{{APS}} == Requirements == {| class="wikitable" ! colspan="2" |'''Recommended System Requirements''' |- |Operating System |Windows 7 x86/64...", and the only contributor was "Roarl" (talk))
- 10:02, 16 August 2022 Roarl (talk | contribs) deleted page VS-IMT Upgrade Stations (content was: "{{AEIPS}} This article describes how to upgrade (or downgrade) the firmware of Zenitel IP devices using the VS-IMT PC tool. __TOC__...", and the only contributor was "Roarl" (talk))
- 10:00, 16 August 2022 Asle (talk | contribs) deleted page Logging to Kiwi (content was: "{{A}} This article is a short guide to installing Kiwi SysLog, and shows how to set it all up in order to receive log info. The version described in this article is: 7.2.19. =Download= Download the latest Kiwi SysLog Daemon. A link is f...")
- 09:18, 16 August 2022 Asle (talk | contribs) deleted page Send SMS messages from AlphaCom (content was: "{{AI}} thumb|500px|right|Application example: Sending line errors in ICX-AlphaCom as SMS message This article describe...", and the only contributor was "Asle" (talk))
- 09:11, 16 August 2022 Asle (talk | contribs) deleted page Stentofon on your Android (content was: "{{A}} thumb|400px '''Alphacom SIP integration on HTC with the SIP application from 3CX''' <br/> A SIP client on Android will register in the AlphaCom as a SIP Station through a wireless network (WIFI). Each regi...")
- 09:08, 16 August 2022 Asle (talk | contribs) deleted page Software House CCURE 9000 (content was: "{{AI}} ==Introduction== The Software House CCURE 9000 can be integrated with the ICX system or the AlphaCom system. The interface is based on a...", and the only contributor was "Hvd" (talk))
- 09:02, 16 August 2022 Asle (talk | contribs) deleted page Siemens SiPass (content was: "{{AI}} =Introduction= ==Description== The integration between SiPass and the AlphaCom is OPC based. The article describes how to interface SiPass integrated with the Zenitel stations in order to get the Alarms and Events via OPC. '''Ap...")
- 09:01, 16 August 2022 Asle (talk | contribs) deleted page Schneider Access Expert (content was: "{{AI}} ==Introduction== Schneider Access Expert integration with ICX-AlphaCom is a licensed feature which connects Schneider Access Expert with...", and the only contributor was "Asle" (talk))
- 09:00, 16 August 2022 Asle (talk | contribs) deleted page Prysm (content was: "{{AI}} ==Introduction== AppVision is a Command and Control application developed by Prysm. The AppVision can be integrated with the ICX system or the AlphaCom system. The integration is via OPC. ==Licensing== ===ICX=== ICX requires the...")
- 08:58, 16 August 2022 Asle (talk | contribs) deleted page Pelco - VideoXpert (content was: "==Information== For detailed information about the integration between ICX-AlphaCom/AlphaCom and VideoXpert, please see the [https://www.pelco.com...", and the only contributor was "HvD" (talk))
- 08:56, 16 August 2022 Asle (talk | contribs) deleted page Pelco - Integration with Digital Sentry (content was: "{{AI}} ==Introduction== The Digital Sentry can be integrated with the ICX-AlphaCom system or the AlphaCom XE system. The integration is using the EDO port. Digital Sentry has an ASCII string based alarm input option. ICX or AlphaCom ca...")
- 08:55, 16 August 2022 Asle (talk | contribs) deleted page PACOM Unison (content was: "{{AI}} ==Introduction== PACOM Unison is a security management application designed for security operators and administrators to set up access control and alarm system monitoring and control at a site. This comprises * Access Control * A...")
- 08:54, 16 August 2022 Asle (talk | contribs) deleted page PACOM GMS (content was: "{{A}} {{I}} ==Introduction== PACOM GMS (Graphical Management System) is a multi-site security management platform, providing...", and the only contributor was "EMortensen" (talk))
- 08:53, 16 August 2022 Asle (talk | contribs) deleted page Open Options (content was: "{{AI}} The Open Options dnaFusion can be integrated with the ICX system or the AlphaCom system. The integration is through a software module which is available from Open Options. ==Licenses== ===Open Options=== Please contact Open Opt...")
- 08:51, 16 August 2022 Asle (talk | contribs) deleted page Milestone XProtect - ICX-AlphaCom Integration (ONVIF & Plugin) (content was: "{{AI}} ==Introduction== <br> '''This article assumes that the reader is''' *familiar with setup and operation of the Milestone XProtect VMS *that the Milestone XProtect VMS is operational, with all the system connected cameras configured...")
- 08:49, 16 August 2022 Asle (talk | contribs) deleted page Milestone XProtect - IC-Edge Integration (ONVIF & Plugin) (content was: "{{E}} ==Introduction== <br> '''This article assumes that the reader is''' *familiar with setup and operation of the Milestone XProtect VMS *that the Milestone XProtect VMS is operational, with all the system connected cameras configured...")
- 16:19, 15 August 2022 Asle (talk | contribs) deleted page LenelS2 OnGuard System (content was: "{{A}} This article describes how to integrate the '''LenelS2 OnGuard System''' with the AlphaCom system. The integration is using the MPC Data Protocol. {{note|Note: This article relates to the integration betwe...")
- 16:07, 15 August 2022 Asle (talk | contribs) deleted page Keep by Feenics (content was: "{{AI}} ==Introduction== The Keep by Feenics integration with ICX-AlphaCom is a licensed feature which connects Keep with a locally deployed...", and the only contributor was "Roarl" (talk))
- 16:06, 15 August 2022 Asle (talk | contribs) deleted page Johnson Controls P2000 Security Management System (content was: "{{AI}} __NOTOC__ thumb|right|300px|P2000: Easy configuration of Intercom Stations File:JCP2000 controlIC.PNG|th...", and the only contributor was "Asle" (talk))
- 16:04, 15 August 2022 Asle (talk | contribs) deleted page Inner Range Integriti (content was: "{{AI}} ==Introduction== Integriti from Inner Range can be integrated with the ICX system or the AlphaCom system. The interface is based on a special integration module which is available from Inner Range. ==Licensing== ===ICX=== ICX req...")
- 16:03, 15 August 2022 Asle (talk | contribs) deleted page IndigoVision Control Center (content was: "{{AI}} ==Introduction== The IndigoVision Control Center can be integrated with the ICX system or the AlphaCom system. The integration is done via OPC. ==Licensing== ===ICX=== ICX requires the presence of the appropriate API/OPC license....")
- 16:02, 15 August 2022 Asle (talk | contribs) deleted page Honeywell Pro-Watch (content was: "{{AI}} ==Introduction== The integration between ICX or AlphaCom and the Pro-Watch from Honeywell is via the MPC protocol. Pro-Watch supports both serial and IP data connections. AlphaCom also support both methods, while in ICX one must...")
- 16:01, 15 August 2022 Asle (talk | contribs) deleted page Honeywell EBI (content was: "{{AI}} The Honeywell Enterprise Buildings Integrator (EBI) can be integrated with the ICX system or the AlphaCom system. The integration is via OPC. ==Licensing== ===ICX=== ICX requires the presence of the appropriate API...")
- 15:58, 15 August 2022 Asle (talk | contribs) deleted page Genetec - VSSC plugin (content was: "{{A}} {{E}} {{I}} ==Introduction== The interface between AlphaCom, ICX and IC-EDGE and Genetec Security Center is through an integration module which is available on the download page of Zenitel Wiki. This article assumes that the reade...")
- 15:45, 15 August 2022 Asle (talk | contribs) deleted page Genetec - Sipelia (content was: "{{AI}} ==Introduction== Genetec has developed a Plug-in called Sipelia which provides an interface from its Security Center Software to ICX or AlphaCom and intercom stations in SIP-mode. ==Sipelia== Sipelia is a small IPBX. Security Cen...")
- 15:44, 15 August 2022 Asle (talk | contribs) deleted page FLIR (content was: "{{AI}} ==Introduction== FLIR's Latitude Network Video Management System (NVMS) is interfaced to the ICX system or AlphaCom based on the STENTOFON .NET SDK. Note that Latitude was a DVTel product, but that DVTel is now part of FLIR. ==L...")
- 15:42, 15 August 2022 Asle (talk | contribs) deleted page ExacqVision (content was: "{{AI}} ==Introduction== The exacqVision VMS from Exacq can be integrated with the ICX-AlphaCom system or th...", and the only contributor was "Asle" (talk))
- 15:41, 15 August 2022 Asle (talk | contribs) deleted page Entelec (content was: "{{AI}} ==Introduction== The Sky-Walker Integration Platform from Entelec is a building management system which also provides an interface to the ICX or AlphaCom system. The interface is based on the ACDP Simple Link Layer Protocol. <BR>...")
- 15:40, 15 August 2022 Asle (talk | contribs) deleted page Ela-soft (content was: "{{AI}} ==General== GEMOS is the security and building management system from ela-soft GmbH. Integration between GEMOS and ICX or AlphaCom is via the ACDP Simple Link Layer protocol. The following paragraphs give a general description of...")
- 12:46, 15 August 2022 Asle (talk | contribs) deleted page Cortech - Integration with Datalog (content was: "{{AI}} ==Introduction== Datalog from Cortech integrates with ICX and AlphaCom using 2 protocols. Data commands into the ICX or AlphaCom are sent via the AlphaCom Data Protocol (ACDP), while event data from the ICX or AlphaCom uses EDO....")
- 12:45, 15 August 2022 Asle (talk | contribs) deleted page Configuration guide for External Communication (content was: "{{A}} This article describes how to set up AlphaCom, Cisco Call Manager 6, Mediant 1000 and MP-114 for application External Comm...", and the only contributor was "Bmatthieu" (talk))
- 12:43, 15 August 2022 Asle (talk | contribs) deleted page Configuration guide for Cisco Call Manager 8 (content was: "{{A}} This article describes how to set up Cisco Call Manager 8 with IP phones and SIP trunk line to AlphaCom.<br> Components used in this example: * Cisco Unified Call Manager version 8.0.3.20000-2 **''This configuration guide is also...")
- 12:41, 15 August 2022 Asle (talk | contribs) deleted page Configuration guide for Cisco Call Manager 6 (content was: "{{A}} This article describes how to set up Cisco Call Manager 6 with IP phones and SIP trunk line to AlphaCom.<br> Components used in this example: * Cisco Unified Call Manager version 6.1.2.1000-13 * Cisco IP phone 7960 * AlphaCom E exc...")
- 12:34, 15 August 2022 Asle (talk | contribs) deleted page Configuration guide for Cisco Call Manager 4.1 (content was: "{{A}} thumb|right|200px This article describes how to set up Cisco Call Manager 4.1 with IP phones and SIP trunk line to AlphaCom.<br> Components: * Cisco Call Manager * Cisco IP pho...")
- 10:23, 15 August 2022 Asle (talk | contribs) deleted page Configuration guide for Cisco Call Manager 10, 11 and 11.5 (content was: "{{A}} This article describes how to configure SIP Trunk integration between AlphaCom and Cisco Call Manager 10.0, 11.0 or 11.5. Components used in this example: *Cisco Call Manager 10.0, 11.0 or 11.5. *AlphaCom XE Exchange ==Configur...")
- 10:20, 15 August 2022 Asle (talk | contribs) deleted page CNL Software (content was: "{{AI}} CNL Software is a global provider of Physical Security Information Management (PSIM) software, designed for complete Integrated Situation Management. IPSecurityCenter™ connects and manages disparate building and security techno...")
- 10:15, 15 August 2022 Asle (talk | contribs) deleted page CEM Systems AC2000 (content was: "{{AI}} ==Introduction== The interface between the ICX system or the AlphaCom system and AC2000 from CEM Systems (Tyco) is based on a special integration module which is available from CEM Systems. This article assumes that the reader is...")
- 10:14, 15 August 2022 Asle (talk | contribs) deleted page Bosch BIS (content was: "{{AI}} ==Introduction== Integration between the ICX system or AlphaCom system and the Bosch Building Integration System (BIS) is via OPC. ==Licensing== ===ICX=== ICX requires the presence of the appropriate API/OPC license. *10026023...")
- 10:12, 15 August 2022 Asle (talk | contribs) deleted page Avigilon - Software interface (content was: "{{AI}} ==Introduction== Avigilon has written a software interface to connect the AlphaCom XE to its Control Center Software. Please visit [https://www.avigilon.com/support/software/integrations Avigilon integrations] ==Licensing== ===Av...")
- 08:59, 15 August 2022 Asle (talk | contribs) deleted page Avigilon - Adding ONVIF compliant Zenitel devices (content was: "{{AEIS}} This guide describes the process of adding Zenitel devices to Avigilon Control Center. It is assumed that Avig...", and the only contributor was "Lennert.werf" (talk))
- 08:40, 15 August 2022 Asle (talk | contribs) deleted page American Dynamics victor (content was: "{{AI}} ==Introduction== The ICX and AlphaCom systems can be interfaced to American Dynamics victor. The interface between ICX/AlphaCom and victor, the Video Management System from American Dynamics (Tyco), is based on EDI/EDO and event...")
- 08:37, 15 August 2022 Asle (talk | contribs) deleted page AMAG Access Control and Security Management System (content was: "{{AI}} ==General== The ICX or AlphaCom system communicate with AMAG Symmetry via the MPC-protocol. <br> '''AMAG''' is a brand/company name used in some countries, in other countries the company is known as '''G4S Technology''' or '''G4 T...")
- 08:36, 15 August 2022 Asle (talk | contribs) deleted page Adding TCIV ONVIF camera to Symmetry CompleteView (content was: "This guide describes the configuration of [http://www.amag.com/video Symmetry CompleteView] 4.8.0.41. It is assumed that Symmetry CompleteView has already been setup and is operational. === Add TCIV camera=== * Open the System Configura...")
- 09:04, 20 July 2022 Asle (talk | contribs) deleted page Error message "Unable to retrieve server information" (content was: "{{AI}} Problem: During installation of Recorder 2.0, when trying to connect the Playback & Configuration Client to the Recorder Sever, you...", and the only contributor was "Asle" (talk))
- 09:04, 20 July 2022 Asle (talk | contribs) deleted page Error message "Could not parse repository trim size" (content was: "{{AI}} If you get the error message "''Could not parse repository trim size''" during the installation of Recorder 2.0, you need to select...", and the only contributor was "Asle" (talk))
- 11:39, 8 July 2022 Asle (talk | contribs) deleted page Event Handler applications (content was: "{{AI}} # Anti-nuisance control # Answer call requests by pressing M-key # CCTV control by relays (RCO) when using Call Request # Dynamic group call # Recording of conversations us...")
- 15:36, 6 July 2022 Roarl (talk | contribs) deleted page ZenitelWiki:Books/060711FS (content was: "{{saved_book}} == Aphacom == === Voice meseges === :FBSAR - PA interface :Voice Alarm Messages :ASVP - AlphaCom Stored Voice Playback Board :Absence Messages :FBSAR - Audio Interface Unit :RCO - Remote Control Outp...")
- 14:58, 6 July 2022 Roarl (talk | contribs) deleted page Door Opening - Automatick Lock (Event Type) (content was: "{{AI}} The '''Door Opening - Automatick Lock''' event can be used for simple access control. It requires that the door station has a full keypad. The station dials the directory number for code lock (default 9531, feature 59). This will...")
- 14:57, 6 July 2022 Roarl (talk | contribs) deleted page User:Tobias/Books/AlphaCom Eventhandler (content was: "{{saved_book}} == AlphaCom Eventhandler == :Event Handler :UDP group :Sub-Event (Event Handler) ;Data Protocol Commands :ALARM MSG :C KEY :CONN 2 GROUP :CALL SETUP :CANCEL MAIL :CLEAR RCO :PROG CONF...")
- 14:13, 6 July 2022 Roarl (talk | contribs) deleted page User:Fskorpe1/Books/060711 (content was: "{{saved_book}} == Aphacom == === Voice meseges === :Absence Messages :AGA - AlphaCom General Purpose Audio Board :ALARM MSG :AlphaCom E20 :AlphaCom E26 :AlphaCom E7 :AlphaCom Feature List :AlphaNet :Alp...")
- 14:08, 5 July 2022 Asle (talk | contribs) deleted page Cancel Call from call button during conversation (content was: "{{AI}} Pressing a call button during conversation is by default ignored by the system. By enabling the flag Users_%26_Stations_(AlphaPro)#...", and the only contributor was "Asle" (talk))
- 13:12, 5 July 2022 Roarl (talk | contribs) deleted page TKIS-2 - Amplified calling (content was: "right|500px This article describes how to connect an external amplifier to the line output of the VoIP Module, TKIS-2. == VPA Power Amplifier == Connect the line output of the VoIP Module to the 'Call' input...")
- 10:39, 1 July 2022 Roarl (talk | contribs) deleted page Category:SIP intercom (content was: "All Zenitel IP intercom devices support SIP protocol out-of-box. This makes it very easy to integrate our intercom solutions with 3rd party iPB...", and the only contributor was "Asle" (talk))
- 14:53, 30 June 2022 Roarl (talk | contribs) deleted page SIP Intercom Configuration (content was: "{{S}} thumb|400px|SIP based System Turbine and INCA stations can be configured to operate in ''SIP Mode'', and can be used with an...")
- 13:21, 30 June 2022 Roarl (talk | contribs) deleted page Category:SIP Intercom - Stations (content was: "{{S}}This category shows stations that can be used in SIP mode towards 3rd party SIP servers. Category:SIP intercom", and the only contributor was "Asle" (talk))
- 10:46, 30 June 2022 Roarl (talk | contribs) deleted page Recorder 2.0 Troubleshooting (content before blanking was: "Recorder 2.0 not starting Recorder 2.0 unable to find SQL Database Recorder 2.0 no audio recorded Category:Troubleshooting Category:Recording")
- 10:15, 30 June 2022 Roarl (talk | contribs) deleted page Category:Video Display Configuration Guide (content was: "Category: INCA Station Configuration Guide Category: INCA Stations")
- 10:14, 30 June 2022 Roarl (talk | contribs) deleted page Category:SIP intercom - Features (content before blanking was: "This category contains articles describing features of the SIP intercom stations. category:SIP intercom")
- 10:14, 30 June 2022 Roarl (talk | contribs) deleted page Category:ICX System (content was: "This category contains articles related to the ICX-500 Gateway and the IC-Core portable software.", and the only contributor was "Asle" (talk))
- 10:13, 30 June 2022 Roarl (talk | contribs) deleted page Category:ICX-AlphaCom (content before blanking was: "ICX-AlphaCom category")
- 10:11, 30 June 2022 Roarl (talk | contribs) deleted page Category:AlphaPro Windows (content before blanking was: "Category:AlphaPro")
- 10:11, 30 June 2022 Roarl (talk | contribs) deleted page Category:AlphaPro - Configuration (content before blanking was: "Category:AlphaPro")
- 10:00, 30 June 2022 Roarl (talk | contribs) deleted page Ring Master (content was: "== Ring Master Configuration == Door Open Function", and the only contributor was "Aksel" (talk))
- 09:54, 30 June 2022 Roarl (talk | contribs) deleted page Turbine - Low level on Line Out after AlphaCom software upgrade (content was: "{{A}} text... Category:Station Troubleshooting", and the only contributor was "[[Special:Contributions/imported>Asle|imported>Asle]]" ([[User talk:imported>Asle|talk]]))
- 09:53, 30 June 2022 Roarl (talk | contribs) deleted page AlphaCom SDK AlphaNetAppExample1 (content was: "{{A}} {{stub}} Category:SDK")
- 09:53, 30 June 2022 Roarl (talk | contribs) deleted page Turbine stations - Release Notes (content was: "Turbine 3.0 - Release Notes")
- 09:52, 30 June 2022 Roarl (talk | contribs) deleted page Release Notes Turbine stations (content was: "#REDIRECT Turbine stations - Release Notes", and the only contributor was "Asle" (talk))
- 09:51, 30 June 2022 Roarl (talk | contribs) deleted page IP Ceiling Loudspeaker – 1023300010 (content was: "test test test", and the only contributor was "Admin" (talk))
- 09:51, 30 June 2022 Roarl (talk | contribs) deleted page IC-EDGE - Manually Added Devices (content was: "rreer", and the only contributor was "Asle" (talk))
- 09:50, 30 June 2022 Roarl (talk | contribs) deleted page IP Ceiling Loudspeaker - ELSIR-10C (content before blanking was: "thumb|350px ==Highlights== * Steel fire dome * 10W Class D, built-in amplifier * >100 dB SPL * Ideal for Micro Zone PA and systems that require a limited number of speakers * Ideal for spe...")
- 09:50, 30 June 2022 Roarl (talk | contribs) deleted page EBMDR-8 Expansion Module - 1023253008 (content before blanking was: "thumb|250px ==Highlights== * Button expansion module for Exigo console mounted access panels * Powered from master access panel * Eight programmable buttons with individual labels and status indic...")
- 09:50, 30 June 2022 Roarl (talk | contribs) deleted page Programming DAK Keys on Master Stations (content before blanking was: " '''Note:''' The following assumes that the user has a basic knowledge of AlphaPro The DAK keys allow the user, by pressing a single button, to call specific station or feature numbers related to their station number....")
- 09:50, 30 June 2022 Roarl (talk | contribs) deleted page EMMAI-2H Handheld Industrial EX Microphone - 1023533312 (content before blanking was: "thumb|500px ==Features== * Handheld microphone for Marine/Industrial application * PTT key * Noise cancelling microphone * High quality digital background noise reduction * IP66 Rating * Designed fo...")
- 09:49, 30 June 2022 Roarl (talk | contribs) deleted page CRM Applications (content before blanking was: "= Display = By setting a station to '''Station Type''': ''CRM'' in AlphaPro the display layout will change from the standard two line display to a four line display. File:CRM 5....")
- 09:49, 30 June 2022 Roarl (talk | contribs) deleted page 2-2d. CCTV with data (2) - Event Handler (practice) (content before blanking was: "x Category: AlphaCom practice")
- 09:48, 30 June 2022 Roarl (talk | contribs) deleted page IP Station Restore Factory Defaults (content before blanking was: "An IP Station may have to be reset to its original factory default settings if, for instance, the password to the webserver is forgotten. The defaults can be either be set to Static IP or Activated DHCP (when there are m...")
- 09:48, 30 June 2022 Roarl (talk | contribs) deleted page How to Program DAK Keys on Master Stations (content before blanking was: " '''Note:''' The following assumes that the user has a basic knowledge of AlphaPro The DAK keys allow the user, by pressing a single button, to call specific station or feature numbers related to their station number....")
- 09:48, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 10.0: CRM (content before blanking was: "This is an exercise about setting up a Control Room Station with Call Request indication. __NOTOC__ = Station Numbers & Names = thumb|900px *101: Entrance *102: El...")
- 09:48, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 9.0: Wireless Paging (content before blanking was: "This is an exercise about wireless paging. __NOTOC__ = Station Numbers & Names = thumb|900px *101: Guard *102: Supervisor *103: Operator *104: Door <br style="clear:both;" /> = Task...")
- 09:47, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 8.0: Hotline - Call Request (content before blanking was: "This is an exercise about setting up a simplex conference that enables monitoring of a cell station. __NOTOC__ = Station Numbers & Names = thumb|900px *201: Operator *202: Supervisor *101: Entrance...")
- 09:47, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 7.1: Simplex Conference - Surveillance (content before blanking was: "This is an exercise about setting up a simplex conference that enables monitoring of a cell station. __NOTOC__ = Station Numbers & Names = thumb|900px *201: Guard 1 *200: Cell 1 *202: Cell 2 *105...")
- 09:47, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 7.0: Simplex Conference - Mobile Radio (content before blanking was: "This is an exercise about setting up a simplex conference that enables listening to a mobile radio network. It also allows talking from the intercom to the mobile radio network by operating a relay. __NOTOC__ = Stat...")
- 09:46, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 5.0: Group Hunt (content before blanking was: "This is an exercise about setting up a Group hunt. __NOTOC__ = Station Numbers & Names = thumb|900px *104: Elevator *416: Reception *6540: T. Edison *102: A. Einstein <br style="clear:bo...")
- 09:46, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 4.2: Audio Program - Remote Setup (content before blanking was: "This is an exercise about setting up remote Audio Program from different sources. __NOTOC__ = Station Numbers & Names = thumb|650px *101: A. Bell *201: Reception *202: Entrance *203: Warehouse <br...")
- 09:46, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 4.1: Audio Program - Alarm Message (content before blanking was: "This exercise assumes that the ASVP package is uploaded to the AMC-IP card, and that there is at least a Basic Messaging License install...")
- 09:46, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 4.0: Audio Program (content before blanking was: "This is an exercise about setting up remote Audio Program from different sources. __NOTOC__ = Station Numbers & Names = thumb|650px *101: A. Bell *201: Reception *202: Entrance *203: Warehouse <br...")
- 09:45, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 3.2: Ringing Group (content before blanking was: "This is an exercise that shows different varietes about Ringing Group. __NOTOC__ = Station Numbers & Names = thumb|900px *104: Elevator *416: Reception *6540: T. Edison *102: A. Einst...")
- 09:45, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 3.1: Group Call and Recall (content before blanking was: "This is an exercise that shows different varietes about doing Group Call and Recall. __NOTOC__ = Station Numbers & Names = thumb|900px *104: Elevator *416: Reception *6540: T...")
- 09:45, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 1.0: Exchange startup. AlphaPro Installation (content before blanking was: "This exercise shows a basic installation of a small exchange with analogue stations. It also includes the installation of the programming tool AlphaPro. __NOTOC__ Image:EX1.PNG = Task = == 1 Exchange startup: =...")
- 09:45, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 1: Exchange startup. AlphaPro Installation (content was: "#REDIRECT Exercise 1.0: Exchange startup. AlphaPro Installation", and the only contributor was "Roarl" (talk))
- 09:44, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 1.3: Search Function (content before blanking was: "This is an exercise that shows the use of manual and automatic search functions. __NOTOC__ = Station Numbers & Names = thumb|900px *104: Elevator *416: Reception *6540: T. Edison *102: A. Ei...")
- 09:44, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 1.2: Call Restrictions, Class of Service (content before blanking was: "This is an exercise that enables a Call Restriction, and gives an example of restricting a feature by use of Class of service...")
- 09:44, 30 June 2022 Roarl (talk | contribs) deleted page Exercise 1.1: Call, Call Forwarding, Call Priority (content before blanking was: "This is an exercise about setting up calls, forwarding calls in different ways and also with different Call Priorities. __NOTOC__...")
- 09:42, 30 June 2022 Roarl (talk | contribs) deleted page Configuration guide for AudioCodes Mediant 600 (content before blanking was: "{{stub}} This article describes the setup of the AlphaCom XE system and the AudioCodes Mediant 600 Gateway. The Mediant 600 supports mixed digital and analog interface configurations, providing up to two (or fractional (...")
- 09:42, 30 June 2022 Roarl (talk | contribs) deleted page INCA IP Stations - Release Notes (content before blanking was: "=A100G80200.01.11.3.7 (2012.10.17)= <span style="color:#ff0000">'''NOTE: This release is only tested for the IP-ARIO, cannot be used for ordinary IP stations'''</span> '''System upgrade file:'''<br /> Image: A100G80200.0...")
- 09:42, 30 June 2022 Roarl (talk | contribs) deleted page Release Notes CCoIP station sw (content was: "#REDIRECT INCA IP Stations - Release Notes", and the only contributor was "Asle" (talk))
- 09:40, 30 June 2022 Roarl (talk | contribs) deleted page Handset for IP Flush Master - 1008097100 (content before blanking was: "==Dimensions== See article: IP Flush Master Station")
- 09:39, 30 June 2022 Roarl (talk | contribs) deleted page Load factory defaults (IP Station) (content before blanking was: "#REDIRECT IP Station Restore Factory Defaults")
- 09:39, 30 June 2022 Roarl (talk | contribs) deleted page AlphaPro Troubleshooting (content before blanking was: "== AlphaPro troubleshooting == * Warning message after "Send All" or "Send Change" * Collecting log file (AlphaPro) * Running AlphaPro on Windows 7 (32/64 bit) * Installing and running AlphaPro on Windows V...")
- 09:37, 30 June 2022 Roarl (talk | contribs) deleted page Pocket paging connection with answer option, high priority feature (content before blanking was: "{| |- |width="170pt"|'''Feature''': | Pocket Paging - High priority |- |'''Default directory number''': || 48 - during conversation |- |'''Feature number''': || 25 |-valign="top" |'''Parameter 1''': || 0 (N/A) |-valign="...")
- 09:36, 30 June 2022 Roarl (talk | contribs) deleted page Håvard's test side (content was: "Dette er en '''test''' = Morn = == Morn du! == Lipium datum et filius motus vita. Lipium datum et filius motus vita Lipium datum et filius motus vita. Lipium datum et filius motus vitaLipium datum et filius motus vita. Lipium datum et f...")
- 09:34, 30 June 2022 Roarl (talk | contribs) deleted page Category:AlphaView Troubleshooting (content was: "#REDIRECT Category:Vingtor-Stentofon Operator Troubleshooting", and the only contributor was "HvD" (talk))
- 09:34, 30 June 2022 Roarl (talk | contribs) deleted page Category:AlphaView - Installation (content was: "#REDIRECT Category:Vingtor-Stentofon Operator - Installation", and the only contributor was "HvD" (talk))
- 09:34, 30 June 2022 Roarl (talk | contribs) deleted page Category:AlphaView - Configuration examples (content was: "#REDIRECT Category:Vingtor-Stentofon Operator - Configuration examples", and the only contributor was "HvD" (talk))
- 09:34, 30 June 2022 Roarl (talk | contribs) deleted page Category:AlphaView - Configuration (content was: "#REDIRECT Category:Vingtor-Stentofon Operator - Configuration", and the only contributor was "HvD" (talk))
- 09:33, 30 June 2022 Roarl (talk | contribs) deleted page Category:AlphaView (content was: "#REDIRECT Category:Vingtor-Stentofon Operator", and the only contributor was "HvD" (talk))
- 09:25, 30 June 2022 Roarl (talk | contribs) deleted page SIP as AlphaCom Stations (content before blanking was: "== Description == The original AlphaCom SIP phone integration is based on SIP-phones related to AlphaCom connected as external Trunk lines. <br\> This implies no individual configuration for each SIP-phone or access to ma...")
- 09:17, 30 June 2022 Roarl (talk | contribs) deleted page Play DAK 1043x520 (content before blanking was: "{| border="1" == Programming of DAK sequences with single digit dialing and wait states == ''' Available only on 1043x0520 , see Play DAK for current implementation''' By using the DAK "T" paramet...")
- 09:16, 30 June 2022 Roarl (talk | contribs) deleted page Partner products (content before blanking was: "This page... Category:Partner products")
- 09:15, 30 June 2022 Roarl (talk | contribs) deleted page Category:IP Classification (content was: "In this category everything related to IP classification is located. Category: Regulations & Classifications")
- 09:15, 30 June 2022 Roarl (talk | contribs) deleted page IP Classification (content was: " Category:Regulations & Classifications")
- 09:11, 30 June 2022 Roarl (talk | contribs) deleted page HighAvailability (content before blanking was: "= Functional Description = == Hardware control == The supervicer of the system is a processor plugged in on the APC card. <br\> The APC processor monitor two AMC card by a dedicated I2C bus controlling some dedicated har...")
- 09:09, 30 June 2022 Asle (talk | contribs) deleted page Program busy override feature (content before blanking was: "'''29 FEAT_PR_BSY_OVR''' {| border="1" !style="background:#ffdead;"|Param1 !style="background:#ffdead;"|Description |- | ?? || Program Busy Override mode (NOT AICE/1) |- |colspan="2"|Text missing |- |} AlphaCom Featur...")
- 17:01, 28 June 2022 Asle (talk | contribs) deleted page Redundant Servers (High Availability) (content was: "{{AI}}thumb|500px ==The Redundant Server concept== The concept is 1:1 redundancy of servers. A pair of servers has the same configuration, only one of them is active at any time. Redundancy is provided for the IP...")
- 13:22, 20 June 2022 Asle (talk | contribs) deleted page Bria video soft phone (content was: "{{P}} thumb|right|500px|Bria soft phone in PULSE system This article describes how to set up the '''Bria video soft pho...", and the only contributor was "Asle" (talk))
- 10:41, 17 June 2022 Roarl (talk | contribs) deleted page Feenics Keep (content was: "{{AI}} ==Introduction== The Keep by Feenics integration with ICX-AlphaCom is a licensed feature which connects Keep with a locally deployed Zenitel system. Multiple ICX-AlphaCom exchanges can be combined and incorporated into Keep, prov...")
- 09:25, 2 June 2022 Asle (talk | contribs) deleted page File:IPHA Event1.PNG
- 10:02, 1 June 2022 Roarl (talk | contribs) deleted page CRM IV: Indicate status of remote stations in AlphaNet (content was: "{{AI}} ==Situation== The LED's of a Control Room Master Station should show that stations have entered the simplex conference by turning on steady red LED in the associated DAK key. When a station...")
- 09:18, 25 May 2022 Roarl (talk | contribs) deleted page $RESET CHILLY (content was: "{{AI}} {| border="1" |- !style="background:#ffdead;" width="90pt" colspan="2"|CHILLY RESET_DEVICE !style="background:#ffdead;" width="100pt"...", and the only contributor was "Roarl" (talk))
- 14:26, 24 May 2022 Roarl (talk | contribs) deleted page Delayed call (content was: "{{AI}} This article describes how to configure the ICX-AlphaCom in such a way that a call button from a substation must be pressed for a predef...", and the only contributor was "Asle" (talk))
- 15:25, 23 May 2022 Roarl (talk | contribs) deleted page Call Time Out When Using Call Request (content was: "{{AI}} This application sets a timer on a call request from a specific station or group. Useful to prevent a door station to be left ringing...", and the only contributor was "Roarl" (talk))
- 15:24, 23 May 2022 Roarl (talk | contribs) deleted page Call timeout (content was: "#REDIRECT Call Time Out When Using Call Request")
- 14:23, 23 May 2022 Roarl (talk | contribs) deleted page SIP phone: Call queueing (content was: "{{A}} thumb|600px This application desribes the use of any device used as SIP stations in...", and the only contributor was "Roarl" (talk))
- 14:20, 23 May 2022 Roarl (talk | contribs) deleted page School Ringing (content was: "{{a}} {{stub}} School ringing is commonly used in school applications and the AlphaCom can trigger RCO, internal ding-dong or both. This can be done by using the inbuilt scheduler event programming or by trigg...")
- 14:22, 20 May 2022 Asle (talk | contribs) deleted page Operate the relay when the station is offline (content was: "{{AI}} <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <tr style="rowspan:2;"> <td style="display: blo...", and the only contributor was "Asle" (talk))
- 09:50, 10 May 2022 Asle (talk | contribs) deleted page Test Nikica (content was: "dasdsadasdasd", and the only contributor was "Nikica" (talk))
- 16:11, 28 March 2022 Asle (talk | contribs) deleted page Scream Alarm using VAD (content was: "{{AI}} This article describes how to use the in-built Sound Detection (Voice Activity Detection - VAD) in the Zenitel IP stations as a Voice Alarm. This application can typically be used at: * Nurser...")
- 16:07, 18 March 2022 Asle (talk | contribs) deleted page Adding TCIV ONVIF camera to Genetec Security Center (content was: "This guide describes the configuration of [https://www.genetec.com/solutions/all-products/security-center Genetec Security Center] 5.7 SR2. It is assumed that Genetec Security Center has already been setup and is operational. === Add TC...")
- 12:38, 7 March 2022 Asle (talk | contribs) deleted page Message Formats - Grouped by Message Number (content was: "jj", and the only contributor was "Asle" (talk))
- 14:45, 3 March 2022 Roarl (talk | contribs) deleted page Category:VS-Client (content was: "This Category contains documents describing the VS-Client. Category:Pulse - Stations")
- 14:40, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client “Parking Management” Edition (content was: "{{P}} VS-Client also exists in a “Parking Management” edition with some differences in user interface and slight differences in functionality. '''Vingtor-Stentofon ZAP Service''' Zap service is required and an Error message is show...")
- 14:40, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client VS-IMT Configuration (content was: "{{P}} In the special case of using VS-SDK for a Pulse-enabled project, VS-Client must be configured from the VS-IMT (Intercom Management Tool). The following settings are configurable: * '''General Settings''': Directory Number, Display...")
- 14:39, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client USB Control Button (content was: "{{EP}} = Overview = VS-Client can also be controlled by an optional external USB button. This button is connected to a USB port on the PC a...", and the only contributor was "Roarl" (talk))
- 14:38, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client Settings (content was: "{{EP}} = Settings = To open the main menu: * Click the menu icon (top right) The '''Settings''' menu is used to set parameters such as '''Ac...", and the only contributor was "Roarl" (talk))
- 14:34, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client Main User Interface (content was: "{{EP}} = User Interface = VS-Client can be used in Lite mode or Full mode with keypad and additional call panels. == Lite mode == Lite mode...", and the only contributor was "Roarl" (talk))
- 14:31, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client Installer (content was: "{{EP}} === Prerequisites === Recommended system requirements: {| border="1" |- |Operating System || Windows 7 x86/64, Windows 8 x86/64 |- |Hardware|| CPU: Dual Core Intel Core or newer<br> RAM: 4 GB<br> Hard drive: 40 GB or better<br...")
- 14:29, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client - Release Notes (content was: "{{P}} =Version 1.5.3.0= '''Date:''' 14.02.2020 <br> '''Status:''' General Available == Improvement == === PHIX-245 Move VS-client documentation online === VS-Client documentation is no longer provided with installation and is now availa...")
- 14:25, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client Group Call (content was: "{{EP}} == Group call in the Zenitel Client == Group call functionality in the Zenitel Client will work the same as on Turbine/INCA intercoms...", and the only contributor was "Roarl" (talk))
- 14:25, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client Call Functions (content was: "{{EP}} == Making a Call == There are several ways of making a call: * Dial number in keypad + click green Call key. * Dial number using PC n...", and the only contributor was "Roarl" (talk))
- 14:24, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client Audio Settings (content was: "{{EP}} Audio settings are available from Main menu Audio entry. none|thumb|589x589px Audio setting...", and the only contributor was "Roarl" (talk))
- 14:23, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client Answer Mode (content was: "{{EP}} == Open/Private Answer Mode == Answer mode settings are available from Main menu Open entry. File:ZenitelClientAnsweMode.png|none|t...", and the only contributor was "Roarl" (talk))
- 14:23, 3 March 2022 Roarl (talk | contribs) deleted page VS-Client Adding Contacts (content was: "{{EP}} Contacts can be added through Add Contact option in Main menu. none|thumb|597x597px To add a c...", and the only contributor was "Roarl" (talk))
- 13:43, 25 February 2022 Roarl (talk | contribs) deleted page File:Zen1.png
- 13:40, 25 February 2022 Roarl (talk | contribs) deleted page File:Zen1.png
- 13:37, 25 February 2022 Roarl (talk | contribs) deleted page File:Zenitel logo main 01res25x2.png
- 13:56, 17 January 2022 Asle (talk | contribs) deleted page Feenics Keep (content was: "{{AI}} ==Introduction== Feenics Keep integration with ICX-AlphaCom is a licensed feature which connects Feenics Keep with a locally deployed Zenitel system. Multiple ICX-AlphaCom exchanges can be combined and incorporated into Feenics K...")
- 13:54, 17 January 2022 Asle (talk | contribs) deleted page Schneider Access Expert (content was: "{{AI}} ==Introduction== Schneider Access Expert integration with ICX-AlphaCom is a licensed feature which connects Schneider Access Expert with a locally deployed Zenitel system. Multiple ICX-AlphaCom exchanges can be combined and incor...")
- 11:05, 8 October 2021 Asle (talk | contribs) deleted page Sandbox roar (content was: "test", and the only contributor was "Roarl" (talk))
- 11:05, 8 October 2021 Asle (talk | contribs) deleted page Sandbox (content was: "This article describes how to upgrade Turbine devices currently running firmware version 3.0, 3.1, 4.0, 4.1 or 4.2 to the latest firmware versi...", and the only contributor was "Asle" (talk))
- 11:04, 8 October 2021 Asle (talk | contribs) deleted page Sandbox Nikica (content before blanking was: "<ul class="tabs vertical" data-tab> <li class="tab-title active">Tab 1</li> <li class="tab-title">Tab 2</li> <li class="tab-title">Tab 3</li> <l...")
- 11:04, 8 October 2021 Asle (talk | contribs) deleted page Sandbox Asle (content was: "{{AEIS}}Zenitel offers a number of IP based kits, which can be used for a wide range of applications. The kits are supported in all modes of operation (Edge, SIP and ICX-AlphaCom). This article compares the properties and capabilities o...")
- 11:04, 8 October 2021 Asle (talk | contribs) deleted page Sandbox Magnar (content was: "Sandbox", and the only contributor was "Magnarl" (talk))
- 11:46, 7 October 2021 Roarl (talk | contribs) deleted page Turbine Configuration - AlphaCom mode (content was: "{{A}} thumb|400px|AlphaCom Intercom System This article describes the configuration required for a :Category:St...", and the only contributor was "Asle" (talk))
- 10:24, 17 August 2021 Asle (talk | contribs) deleted page Exacq (content was: "{{AI}} ==Introduction== The exacqVision VMS from Exacq can be integrated with the ICX system or the AlphaCom system. The integration is using t...", and the only contributor was "Asle" (talk))
- 09:33, 9 August 2021 Asle (talk | contribs) deleted page Adding TCIV ONVIF camera to Pelco VideoXpert Professional (content was: "This guide describes the configuration of [https://www.pelco.com/vxpro Pelco VideoXpert Professional] 2.5.0.109 and newer. It is assumed that Pelco VideoXpert Professional has already been setup and is operational. * Start the '''VxTool...")
- 15:45, 20 May 2021 Asle (talk | contribs) deleted page Upgrade Turbine stations from 3.1, 4.0 or 4.1 (content was: "This article describes how to upgrade Turbine devices currently running firmware version 3.0, 3.1, 4.0, 4.1 or 4.2 to the latest firmware version 6.x.x.x. == Devices currently running version 3.1, 4.0, 4.1 or 4.2 == === Upgrade using V...")
- 13:34, 18 May 2021 Asle (talk | contribs) deleted page Turbine Devices with Double OS (content was: "Depending on the hardware and software versions, a Turbine device might have: * Single Operative System (Main OS) * Main OS and a Recovery OS,...", and the only contributor was "Asle" (talk))
- 14:34, 30 April 2021 Asle (talk | contribs) deleted page Turbine stations with Recovery OS (content was: "{{cons}} == Turbine devices with single OS == Turbine devices with firmware 5.0 and earlier has a single Main Operative System, '''Main OS'''....", and the only contributor was "Asle" (talk))
- 14:32, 30 April 2021 Asle (talk | contribs) deleted page Turbine stations with double OS (content was: "{{cons}} == Turbine devices with single OS == Turbine devices with firmware 5.0 and earlier has a single Main Operative System, '''Main OS'''....", and the only contributor was "Asle" (talk))
- 13:38, 30 April 2021 Asle (talk | contribs) deleted page TKIE Substation - Station LED (content was: "{{A}} The Station LED on the IP Vandal Resistant Substation TKIE must be configured. ==Set I/O2 as Output== Log into the station webserver and navigate to the I/O settings. Choose I/O and set it as Output. File:TKIEsubLED1.png|thumb...")
- 13:37, 30 April 2021 Asle (talk | contribs) deleted page Configuration fof the IP Vandal Resistant Substation TKIE (content was: "{{cons}}", and the only contributor was "Asle" (talk))
- 14:22, 1 February 2021 Asle (talk | contribs) deleted page Grandstream GXV3240 (content was: "{{A}}thumb|right|500px|Grandstream GXV3240 Video Phone with AlphaCom XE server This article describes how to set...", and the only contributor was "Asle" (talk))
- 14:22, 1 February 2021 Asle (talk | contribs) deleted page Grandstream GXV3240 (Pulse) (content was: "{{P}} thumb|right|500px|Grandstream GXV3240 IP Phone in PULSE system This article describes how to set up...", and the only contributor was "Asle" (talk))
- 14:22, 1 February 2021 Asle (talk | contribs) deleted page Grandstream GXV3240 (Edge) (content was: "{{E}} thumb|right|500px|Grandstream GXV3240 IP Phone in an IC-EDGE System This article describes how to set...", and the only contributor was "Roarl" (talk))
- 15:18, 8 January 2021 Roarl (talk | contribs) deleted page IP Desk Master -V2 Restore Factory Defaults (content was: "{{AEIS}}This procedure is the recommended procedure for all IP Stations with Display. * The Station Menu is available in both Edge and SIP...", and the only contributor was "Roarl" (talk))
- 14:05, 8 January 2021 Roarl (talk | contribs) deleted page IP Desktop Master Station - 1008400000 (content was: "{{AEIS}} thumb|400px|IP Desktop station 100 8400 000 == Getting Started == * IP Desk Connections|Connecting the...", and the only contributor was "Roarl" (talk))
- 10:25, 11 December 2020 Asle (talk | contribs) deleted page Modbus TCP (Can you please remove this article from our wiki: https://wiki.zenitel.com/wiki/Modbus_TCP It seems that it is too customer specific. Regards, Hans)
- 10:17, 7 December 2020 Roarl (talk | contribs) deleted page Turbine Display Station Restore Factory Defaults (content was: "{{AEIS}}This procedure is the recommended procedure for all IP Stations with Display. * The Station Menu is available in both Edge and SIP mode. <br/> * In ICX-Alphacom mode the Station Menu is only available when the IP Station is off...")
- 10:12, 7 December 2020 Roarl (talk | contribs) deleted page IP Desktop Master Station - 1008401000 (content was: "{{AEIS}} thumb|500px|IP Desktop station 100 8401 000 == Getting Started == * IP Desk Connections|Connecting the...", and the only contributor was "Roarl" (talk))
- 09:49, 7 December 2020 Roarl (talk | contribs) deleted page IP Master Station Software upgrade (content was: "{{AEIS}} This article describes how to upgrade the software of the IMX6 based IP Master stations via the '''web interface''' of the station....", and the only contributor was "Roarl" (talk))
- 15:13, 4 December 2020 Asle (talk | contribs) deleted page Turbine 6.0 - Release notes (content was: "==Release info== This document provides the release notes for VSF-Fortitude 6.0 with incremental bug fix releases. These release notes are the first release notes for VSF-Fortitude. '''Name:''' VSF-Fortitude <br> '''Description:''' VSF-...")
- 14:26, 19 November 2020 Roarl (talk | contribs) deleted page IP Station Configuration - AlphaCom mode (content was: "{{A}} This article describes the minimum configuration required for an INCA IP station to operate with an '''AlphaCom''' server. The IP Stations are configured through their web interface. IP Master S...")
- 13:16, 17 November 2020 Roarl (talk | contribs) deleted page Category:INCA Indication LEDs (content was: "Category:INCA Stations", and the only contributor was "Roarl" (talk))
- 13:15, 17 November 2020 Roarl (talk | contribs) deleted page Category:Turbine Indication LEDs (content was: "This article contains information about the LED indicators of the stations in the Turbine family. Category: Turbine", and the only contributor was "Asle" (talk))
- 08:44, 20 October 2020 Asle (talk | contribs) deleted page Actions ITSV-3 - Capture Trace (content was: "To do a network trace in the ITSV-3 go to '''Maintenance''' > '''System Diagnosis''' > '''Debug''' tab. * At '''One-click Debugging''' select '...", and the only contributor was "Asle" (talk))
- 15:08, 15 September 2020 Roarl (talk | contribs) deleted page Lenel OnGuard - ICX-AlphaCom Integration (content was: "#REDIRECT LenelS2 OnGuard - ICX-AlphaCom Integration", and the only contributor was "Roarl" (talk))
- 15:07, 15 September 2020 Roarl (talk | contribs) deleted page Lenel OnGuard - IC-EDGE Integration (content was: "#REDIRECT LenelS2 OnGuard - IC-EDGE Integration", and the only contributor was "Roarl" (talk))
- 15:07, 15 September 2020 Roarl (talk | contribs) deleted page Lenel OnGuard System (content was: "#REDIRECT LenelS2 OnGuard System", and the only contributor was "Roarl" (talk))
- 09:12, 5 August 2020 Roarl (talk | contribs) deleted page Permament Audio Stream (content was: "#REDIRECT Permanent Audio Stream", and the only contributor was "Roarl" (talk))
- 10:02, 22 July 2020 Roarl (talk | contribs) deleted page CURE 9000 ICX-AlphaCom integration- Release Notes (content was: "'''Release State:''' Released<br/> '''Release Version:''' 2.80.004, 2.70.002, 2.60.004, 2.53.004<br/> '''Installation Package 1:''' CCURE9000v2.x_VS-AlphaCom_Integration2.xx.00x.msi<br/> '''Installation Package 2:''' CCURE9000v2.x_VS-Alp...")
- 12:29, 29 June 2020 Asle (talk | contribs) deleted page Milestone Smart Client ICX (content was: "{{A}} {{I}} ==Introduction== The interface between AlphaCom, ICX and Milestone XProtect VMS is through an integration module which is available on the download page of Zenitel Wiki. This article assumes that the reader is *familiar with...")
- 12:26, 29 June 2020 Asle (talk | contribs) deleted page Milestone Smart Client IC EDGE (content was: "{{DISPLAYTITLE:Milestone XProtect - IC-EDGE Integration}} {{E}} ==Introduction== The interface between IC-EDGE and Milestone XProtect VMS is through an integration module which is available on the download page of Zenitel Wiki. This art...")
- 13:34, 20 May 2020 Asle (talk | contribs) deleted page Flowire - Release Notes (content was: "== Version 4.1.3.13 (2019-11-01) == ===Release Info=== *Name: Zenitel-flowire 4.1.3.13 and onwards *Description: zenitel-flowire 4.1.3.xx can be installed on FCDC1/2 and TFIX-x and EAPFX-x. *Version:4.1.3.13 *Date: 01.11.2019 *Status: GA...")
- 13:33, 20 May 2020 Asle (talk | contribs) deleted page Release Notes Flowire (content was: "#REDIRECT Flowire - Release Notes", and the only contributor was "Asle" (talk))
- 14:22, 12 May 2020 Asle (talk | contribs) deleted page FCDC3 - Software Upgrade Procedure (content was: "This article describes how to upgrade the software in Flowire device FCDC-3. For upgrade procedure for FCDC-1 or FCDC-2, see Flo...", and the only contributor was "Asle" (talk))
- 09:46, 26 February 2020 Roarl (talk | contribs) deleted page Proximex (content was: "{{AI}} The Physical Security Information Management (PSIM) Software from Proximex can be integrated with the ICX system or the AlphaCom system. The integration is through a software module which is available from Proximex. This softwa...")
- 17:13, 29 January 2020 Asle (talk | contribs) deleted page ICX-Core in VirtualBox (content was: "{{I}}This article describes how to install ICX-Core in a VirtualBox environment. ==Prerequisites== * Virtual machine: VirtualBox (version 6.0 is used in this guide): https://www.virtualbox.org/ * Operating System: Ubuntu 18.04.x LTS Ser...")
- 17:08, 29 January 2020 Asle (talk | contribs) deleted page Licenses for ICX-500 and ICX-Core (content was: "{{I}} This article lists licenses available for ICX-500 and ICX-Core. All licenses can be stacked. {{note| * ''From factory there is a '''20-day free license period''' during which all features can be used without the need of any licens...")
- 16:58, 29 January 2020 Asle (talk | contribs) deleted page ICX-Core Installation (content was: "{{I}}This article describes how to install the ICX-Core software package. ICX-Core is the software running on the ICX-500 Gateway. The software is also available for installation on industry standard PC hardware. ICX-Core can be ins...")
- 16:51, 29 January 2020 Asle (talk | contribs) deleted page ICX-AlphaCom Core (content was: "xx", and the only contributor was "Asle" (talk))
- 14:51, 3 January 2020 Asle (talk | contribs) deleted page ENA Amplifier - Basic configuration (content was: "{{A}} thumb|800px|AlphaCom with ENA Amplifiers This article describes the basic configuration on how to get started...", and the only contributor was "Asle" (talk))
- 11:38, 6 December 2019 Roarl (talk | contribs) deleted page Edge/Pulse devices (content was: "{{EP}} These devices are supported in IC-EDGE Systems and Pulse Systems: * Turbine devices * INCA devices * I...")
- 10:54, 6 December 2019 Roarl (talk | contribs) deleted page IC-EDGE - Getting started (content was: "{{E}} thumb|400px|An Edge System can contain any IP Station from Zenitel This article describes step by step how to co...", and the only contributor was "Asle" (talk))
- 11:38, 20 November 2019 Asle (talk | contribs) deleted page VidSys (content was: "{{A}} Integration between the Physical Security Information Management (PSIM) Software from VidSys and AlphaCom is through a software module which is available from VidSys. This software module is based on the STENTOFON SDK. ==Licensin...")
- 11:37, 20 November 2019 Asle (talk | contribs) deleted page Pacom - Integration with Unison (content was: "{{A}} ==Introduction== Unison from Pacom integrates with AlphaCom using the ACDP protocol. Link to [https://pacom.com/portal/wp-content/uploads/2018/09/PACOM-Unison-Intercom-Integration-Stentofon-Alphacom-v1.0.pdf Pacom website] Cate...")
- 11:35, 20 November 2019 Asle (talk | contribs) deleted page Geutebrueck (content was: "{{A}} ==Introduction== AlphaCom can connect to Geutebrueck's GeViScope+ video platform by sending EDO-commands from the event handler. Geutebrueck (Geutebruck) has a TACI (Telnet Action Command Interface) plugin available for GeViScope+...")
- 14:53, 18 November 2019 Asle (talk | contribs) deleted page Pelco - Integration with Pelco Endura and EnduraXpress System (content was: "{{A}} {{Obs|The '''PelcoInterfaceApplication''' described in the article below is obsolete. Integration to Pelco Endura is to be done via ED...", and the only contributor was "Roarl" (talk))
- 14:52, 18 November 2019 Asle (talk | contribs) deleted page Integration with Pelco Endura and EnduraXpress System (content was: "#REDIRECT Pelco - Integration with Pelco Endura and EnduraXpress System", and the only contributor was "Asle" (talk))
- 14:52, 18 November 2019 Asle (talk | contribs) deleted page Pelco (content was: "#REDIRECT Pelco - Integration with Pelco Endura and EnduraXpress System")
- 14:49, 18 November 2019 Asle (talk | contribs) deleted page CyberTech (content was: "{{A}} CyberTech is now part of Nice. <br> Integration has been implemented and tested with: * Nice Perform 3.5 - Mobile Recording Integration * Nice NTR, formerly CyberTech Pro Please refer to the article [[AlphaCom Recording Interface]...")
- 14:45, 18 November 2019 Asle (talk | contribs) deleted page Bosch Vidos (content was: "{{A}} ==Introduction== Connections between AlphaCom and the Bosch Vidos video management system is via a TCP/IP connection. Vidos has TCP port 1758 available for this link. ==AlphaCom configuration== The interface is based on EDO comman...")
- 14:44, 18 November 2019 Asle (talk | contribs) deleted page Bosch BVMS (content was: "{{A}} ==Introduction== Connection between AlphaCom and the Bosch Video Management System (BVMS) is via a serial link and uses the 'Allegiant CCL-Emulation' interface. This interface is available from Bosch. Many, but not all, of the orig...")
- 14:42, 18 November 2019 Asle (talk | contribs) deleted page Andover Continuum (content was: "{{A}} ==Introduction== Andover Continuum and AlphaCom are integrated via the MPC protocol. The software module is available from Andover. <br> '''Note:''' Andover Continuum is also known under the brand names '''TAC''' and '''Schneider E...")
- 14:40, 18 November 2019 Asle (talk | contribs) deleted page TAC (content was: "#REDIRECTAndover_Continuum Category:3rd party integration", and the only contributor was "Hvd" (talk))
- 14:39, 18 November 2019 Asle (talk | contribs) deleted page Schneider Electric (content was: "#REDIRECTAndover_Continuum Category:3rd party integration", and the only contributor was "Hvd" (talk))
- 13:40, 22 October 2019 HvD (talk | contribs) deleted page File:ServiceProviderRemoteClientsWindow.png
- 11:30, 22 October 2019 HvD (talk | contribs) deleted page File:SerProviderApplConnect.png
- 11:29, 22 October 2019 HvD (talk | contribs) deleted page File:SerProviderApplConnect.png (Deleted old revision 20180223114200!SerProviderApplConnect.png)
- 11:18, 22 October 2019 HvD (talk | contribs) deleted page File:ServiceApplConfigWindow.png
- 11:18, 22 October 2019 HvD (talk | contribs) deleted page File:ServiceApplConfigWindow.png (Deleted old revision 20191022091630!ServiceApplConfigWindow.png)
- 10:30, 10 October 2019 Asle (talk | contribs) deleted page Sandbox Tobias (content was: "{{CodeMultiLineStart}}Code line 1 Code line 2 Code line 3 Code line 4 {{CodeMultiLineEnd}} <div style="margin:24px"> {| style="backgr...", and the only contributor was "Tobias" (talk))
- 15:33, 16 September 2019 Roarl (talk | contribs) deleted page VS-Client Pulse Installer (content was: "{{P}} === Prerequisites === Recommended system requirements: {| border="1" |- |Operating System || Windows 7 x86/64, Windows 8 x86/64 |- |Hardware|| CPU: Dual Core Intel Core or newer<br> RAM: 4 GB<br> Hard drive: 40 GB or better<br>...")
- 15:31, 16 September 2019 Roarl (talk | contribs) deleted page VS-Client Pulse USB Control Button (content was: "{{P}} = Overview = VS-Client can also be controlled by an optional external USB button. This button is connected to a USB port on the PC and all necessary software drivers are automatically installed. Actions on the button are detected...")
- 15:31, 16 September 2019 Roarl (talk | contribs) deleted page VS-Client Pulse Settings (content was: "{{P}} = Settings = To open the main menu: * Click the menu icon (top right) The '''Settings''' menu is used to set parameters such as '''Account''', '''Application''', '''Call settings''', '''Keyboard''', '''Function key''' and ...")
- 15:30, 16 September 2019 Roarl (talk | contribs) deleted page VS-Client Pulse Main User Interface (content was: "{{P}} = User Interface = VS-Client can be used in Lite mode or Full mode with keypad and additional call panels. == Lite mode == Lite mode in idle call state. none|thumb|719x719px Lite mode in conversation ca...")
- 15:29, 16 September 2019 Roarl (talk | contribs) deleted page VS-Client Pulse Group Call (content was: "{{P}} == Group call in VS-Client == Group call functionality in VS-Client will work the same as on Turbine/INCA intercoms with some adjustment to better fit VS-Client user interface. Currently there are 2 main ways of sending out an anno...")
- 15:29, 16 September 2019 Roarl (talk | contribs) deleted page VS-Client Pulse Call Functions (content was: "{{P}} == Making a Call == There are several ways of making a call: * Dial number in keypad + click green Call key. * Dial number using PC numeric keyboard + Enter. * Double-click an item in the Contacts, History or Favorites. * Double-cl...")
- 15:29, 16 September 2019 Roarl (talk | contribs) deleted page VS-Client Pulse Audio Settings (content was: "{{P}} Audio settings are available from Main menu Audio entry. none|thumb|589x589px Audio settings show a list of available Speaker and Microphone devices. Speaker volume and microphone sensitivity ca...")
- 15:28, 16 September 2019 Roarl (talk | contribs) deleted page VS-Client Pulse Answer Mode (content was: "{{P}} == Open/Private Answer Mode == Answer mode settings are available from Main menu Open entry. none|thumb|598x598px VS-Client can be set either to Open or Private answer mode. In Open mode, incoming c...")
- 15:28, 16 September 2019 Roarl (talk | contribs) deleted page VS-Client Pulse Adding Contacts (content was: "{{P}} Contacts can be added through Add Contact option in Main menu. none|thumb|597x597px To add a contact individually: * Enter values in the fields for Name, Number, and Location - all values are manda...")
- 12:35, 13 September 2019 Asle (talk | contribs) deleted page Template:Platform (content was: "<div style="margin:24px"> {|style="background:#FFFFFF; color:black; border:1px solid #000000; padding-left:12px; padding-right:12px" width="100...", and the only contributor was "Asle" (talk))
- 16:39, 12 September 2019 Roarl (talk | contribs) deleted page Virtual I/O (Pulse/SIP) (content was: "{{PS}} Virtual I/O is a feature for activating scripts on station events. The supported script languages are Lua and bash. A station can be triggered, e.g. by DTMF or an input to execute scripts towards other systems, e.g. access control...")
- 16:26, 12 September 2019 Roarl (talk | contribs) deleted page Language Settings (Edge/SIP) (content was: "{{ES}} It is possible to change language of the display texts. This does '''not''' affect the texts in the web server interface. {{Note|Thi...", and the only contributor was "Roarl" (talk))
- 16:24, 12 September 2019 Roarl (talk | contribs) deleted page Time Settings (Edge/SIP) (content was: "{{ES}} The user is able to configure time by either enabling NTP and specifying NTP server, or setting up time manually. On Master stations...", and the only contributor was "Roarl" (talk))
- 16:22, 12 September 2019 Roarl (talk | contribs) deleted page I/O Settings (Edge/SIP) (content was: "{{ES}} The Turbine range of stations have configurable I/O's, i.e. you can choose if an I/O should b...", and the only contributor was "Roarl" (talk))
- 15:59, 12 September 2019 Roarl (talk | contribs) deleted page Call Settings (Pulse/SIP) (content was: "{{PS}} == Call Settings configuration== Select '''SIP Configuration''' > '''SIP Settings''' to access the page for configuring Call Settings. thumb|left|500px|Call Settings <br style="clear:both;" /> *'''E...")
- 15:54, 12 September 2019 Roarl (talk | contribs) deleted page Audio Settings (Pulse/SIP) (content was: "{{PS}} == Main Audio Settings == Audio settings are used to set various speaker and microphone related options, tone volume, automatic volume control, noise reduction, line in/out settings, ringing tones, and other. Select '''SIP Configu...")
- 15:32, 12 September 2019 Roarl (talk | contribs) deleted page Web Call and HTTP commands (SIP/Pulse) (content was: "{{PS}} '''Webcall''' makes it possible to establish calls and operate relay directly from the '''station web interface'''. One can also initi...", and the only contributor was "Asle" (talk))
- 15:26, 12 September 2019 Roarl (talk | contribs) deleted page Volume and handset override (Pulse/SIP) (content was: "{{PS}} '''Volume and handset override''' is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it...", and the only contributor was "Asle" (talk))
- 15:24, 12 September 2019 Roarl (talk | contribs) deleted page IP Flush Master - Call Queuing (Pulse and SIP mode) (content was: "{{PS}} thumb|150px|Line Keys on the IP Flush master station This article is applicable for the IP Flush Master used in '''Pulse mode''' and '''SIP mode'''. It describes...")
- 15:20, 12 September 2019 Roarl (talk | contribs) deleted page Configuration guide for IP Hotline - Pulse and SIP (content was: "{{PS}} thumb|350px|IP Hotline This article is applicable for IP Hotline Stations IP Hotline Station - 1008070000|...", and the only contributor was "Roarl" (talk))