Search results

Create the page "Event Handler applications" on this wiki! See also the search results found.

• Answer call requests by pressing M-key
  ==Event Handler== This is done using the [[Event Handler]]. Select '''Exchange & System''' from the top menu in [[AlphaPro]]:
  1 KB (166 words) - 11:12, 8 July 2022
• Answer call requests by lifting the Handset
  ==Event Handler== This is done using the [[Event Handler]]. Go to Exchange & System from the top menu in [[AlphaPro]]:
  982 bytes (148 words) - 13:48, 31 May 2022
• Pulsing of RCO (Event Handler)
  The stations dial an Event Trigger number ([[Event Trigger with cancel tone feature|feature 85]]), say number 9533, to pulse t ...nts|Exchange and System -> Events]], press Insert and create the following event:
  775 bytes (106 words) - 11:34, 8 July 2022
• Voice Paging from IP Substation
  ==Event Handler== Use the event handler (Exhcange&System->Events) to create this event:
  1 KB (240 words) - 16:20, 31 May 2022
• Simplex conversation (Event Handler)
  This event will set the whole exchange in simplex (Press To Talk) mode. Simplex mode w ...nts|Exchange and System -> Events]], press Insert and create the following event:
  1 KB (175 words) - 11:37, 8 July 2022
• OWN - Modify Event Owner (%1) and/or Related To (%2) values
  ...the "Event Owner" or the "Related To" parameter. It can be useful in some applications, especially in [[RCI]] strings were there by default is no parameters. The OWN 101 – sets the event owner to dir.no. 101
  761 bytes (117 words) - 16:16, 4 October 2019
• Empty a group (Event Handler)
  Here dialing the event trigger 9534 will remove all members of group 48. ...nts|Exchange and System -> Events]], press Insert and create the following event:
  873 bytes (122 words) - 11:35, 8 July 2022
• Delayed Call
  The Delayed Call functionality is controlled by the [[Event Handler]], which is configured from [[AlphaPro]]. '''Event 1''' - When the call button (Subevent = 1) is pressed (=ON), start a 3 seco
  1 KB (218 words) - 11:21, 8 July 2022
• Door Opening using Dummy Number (Event Handler)
  Use the two-step event trigger, [[Event trigg on dialing digits|feature 105]]. ...nts|Exchange and System -> Events]], press Insert and create the following event:
  1 KB (194 words) - 11:14, 8 July 2022
• Timeout of conversation (Event Handler)
  '''Event 1''' '''Event 2'''
  1 KB (188 words) - 11:32, 8 July 2022
• Call restriction from guard station to cell station (Event Handler)
  Use the event type “[[Call Requester Mode (Event Type)|Call Requester Mode]]” on the cell stations to set/reset call forwa ...:''' Set transfer to 'dummy' number 345 when not in [[Call Requester Mode (Event Type)|Call Requester Mode]].
  2 KB (225 words) - 11:36, 8 July 2022
• Increased volume on ringing signal
  ...rivate Ringing mode (Event Type)|9 - Private Ringing mode]] in the [[Event Handler]], one can change the volume during the ringing, and set it to a normal lev ...nts|Exchange and System -> Events]], press Insert and create the following event:
  2 KB (320 words) - 11:22, 8 July 2022
• %udd
  The '''%udd''' macro is used in the [[Event Handler]] to read the value of an [[UDD]] (User Defined Data variable). [[Event_Han ...turns the content of UDD variable in indexed by the physical number of the event 'Owner'''
  1 KB (192 words) - 09:50, 4 October 2019
• Call Pickup (Event Handler)
  ...ation. 9535 must be defined as [[Event Trigger with parameter (Event Type)|Event Trigger with parameter]], feature 95. '''Event 1''' - When a station is called, store the directory number of the calling
  2 KB (250 words) - 13:48, 14 December 2023
• Delayed Reporting of Line Errors
  ...ult reporting, and how to use customized error reporting using the [[Event Handler]] instead. == Configure Station Error reporting in Event Handler ==
  3 KB (412 words) - 14:02, 31 May 2022
• Group Call - PTT function
  == DAK event == In the [[Event Handler]], the event 30 (Station Input or Station DAK key) is triggered when a DAK Key is presse
  1 KB (197 words) - 14:24, 31 May 2022
• Event Trigger with parameter (Event Type)
  The event type 25 is triggered by a so-called "two-step" event trigger. There are two different types, one which waits for a complete dire * [[Event Trigger w/User Parameter|Feature 95]] (Default 9535): Dial 9535 + dir no
  4 KB (589 words) - 10:28, 30 March 2023
• Station Fault (Event Type)
  ==Event description== |width="200pt"|'''Event Owner''':
  2 KB (251 words) - 10:48, 9 February 2023
• Door opening of Ring Master stations from AlphaCom
  Door opening of Ring Master stations from AlphaCom is configured by using [[Event During Connection]] and DP message [[DTMF_CONN]] [[Event During Connection]] configured as directory number "6" (Door opening)
  1 KB (167 words) - 10:47, 1 June 2022
• Missed calls
  ...andard feature for displaying '''Missed calls''', but by using the [[Event Handler]], one can create such function. ...phaPro, select '''Exchange & System''' > '''Events''', and '''Insert''' an event with the following properties:
  1 KB (160 words) - 14:30, 31 May 2022
• CRM: Indicate status of remote stations in AlphaNet
  ...s reporting conference membership. The event type [[Conversation Outgoing (Event Type)|08 - Conversation Outgoing]] is triggered when a station is talking i ...Room Station is located. This event report message will in turn trigger an event in the node with the Control Room Station, which is used to control the LED
  3 KB (422 words) - 11:30, 8 July 2022
• SIP phone: Forward unattended call
  The Event Type [[Private Ringing Outgoing(Event Type)|33 - Private Ringing Outgoing]] can be used to forward unattended SIP '''Note''' - The event type 33 require AMC 10.30 or later.
  2 KB (278 words) - 12:21, 24 February 2023
• Forward unattended Call Request (Event Handler)
  [[Category:AlphaCom Applications]] [[Category:ICX-AlphaCom Applications]]
  1 KB (189 words) - 11:32, 8 July 2022
• Play a customized audio message during ringing
  ...nts|Exchange and System -> Events]], press Insert and create the following event: ...d ringing signal should be played in the loudspeaker of the initiator this event must be used:
  2 KB (290 words) - 10:54, 5 May 2023
• Unlock intercom station with password
  ...station will be moved to a COS were all features are disabled, except the event trigger feature itself. * In AlphaPro - Directory & Features, '''Insert''' a new event trigger directory number with feature number 85, e.g. 9200.
  2 KB (336 words) - 08:04, 1 June 2022
• Wudd
  The '''WUDD''' command is used in the [[Event Handler]] to write a value to [[UDD]] (User Defined Data variable). The value is ch From AMC 11.02 alphanumeric storing from event handler is possible (not via $WUDD). Alphanumeric storing is cleared after reset.
  2 KB (282 words) - 16:19, 4 October 2019
• Modify ASVP alarm message repetitions
  ...editor in the [[TST console]] or the [[SNV|$SNV command]] from the [[Event Handler]]. ====Using the Event Handler ====
  2 KB (352 words) - 16:09, 20 July 2022
• Group Call - Increased volume
  * This event is CPU extensive. Maximum members in a group using this feature '''should n When stations outside UDP group 2 dial group call 86 this event will not be triggered, and the volume will not be altered.
  2 KB (315 words) - 15:22, 11 August 2022
• UDP group
  ...ty. An '''UDP group''' is a group of stations that are used by the [[Event Handler]] to construct rules that applies to a group of stations. There are 8 UDP g An Event Handler rule can refer to an UDP group in the condition part. Both the "owner" and
  3 KB (453 words) - 13:45, 11 May 2022
• Dynamic group call
  ...station. This is the '''Group Configuration''' button. Directory number [[Event Trigger w/User Parameter|9535]] is included in a default database. ===Event Handler configuration===
  4 KB (649 words) - 11:13, 8 July 2022
• Stream audio from 3rd party
  [[File:PCStream2.png|thumb|left|700px|Event Handler]] [[Category:AlphaCom Applications]]
  1 KB (166 words) - 14:07, 16 February 2024
• Scream Alarm
  ...n Input or Station DAK key (Event Type)|Station Input or Station DAK key]] event programmed to check a UDD before sending a [[mail]] to the Staff stations. ==Event Handler programming==
  5 KB (815 words) - 14:02, 16 November 2023
• Audio Monitoring - Listen In
  ...Step Event Trigger w/User Parameter]], 9535 (feature 95/0). The programmed event reads the dialed directory number and commands the substation to enter a co ==Event Handler programming==
  4 KB (551 words) - 10:33, 8 June 2023
• Anti-nuisance control (Event Handler)
  ...+ Substation is dialed, an [[Event_Trigger_with_parameter_%28Event_Type%29|event type 25]] is triggered and the action string [[SET_STATION_COS|$SSC L%2.dir When the timer expires it will trigger [[Event_Timeout_%28Event_Type%29|event type 21]], and the command [[SET_STATION_COS|$SSC L%1.dir U1]] will move th
  3 KB (541 words) - 09:52, 8 July 2022
• CCTV control by relays (RCO) when using Call Request
  The [[Event Handler]] is used to control the [[RCO]]'s which operate the relays. In the example '''Event 1''' - When a conversation is made from the master station to the substatio
  4 KB (600 words) - 11:12, 8 July 2022
• AudioCodes - More than 8 lines needed
  ===Create Event Trigger Number=== The number dialled by the user will actually be an Event Trigger. This must be added in the AlphaCom directory table as ''feature''
  4 KB (678 words) - 12:05, 24 February 2023
• Apartment Building Entry Point
  ==Event Handler programming== '''Event 1''' - CALL event
  5 KB (836 words) - 15:18, 6 January 2023
• MPC Data Protocol
  ...ink Layer|simple link layer]], but only for single-exchange (not AlphaNet) applications. ...it’s possible to send additional data strings from the AlphaCom’s [[Event Handler]] on this port also.
  993 bytes (157 words) - 14:24, 7 September 2017
• Page/Party Conference 1 Line
  ==Event Handler configuration== ===Call Setup event===
  4 KB (635 words) - 01:59, 2 March 2023
• HTTP string: Send from AlphaCom
  HTTP GET can be sent to third-party systems using EDO ports and Event Handler. ===Create Event===
  4 KB (557 words) - 00:56, 26 March 2024
• Situations that require System Reset
  ...f these applications is the intercom (AMCd) application. Examples of other applications are [[SIP]], [[Syslog (AlphaCom)|Syslog]], [[AlphaWeb]] (web server) and [[ * Reboot the exchange. This will restart the Linux operative system and all applications. A reboot takes approx. xx seconds in a fully equipped E7, and xx seconds i
  2 KB (344 words) - 11:22, 8 September 2017
• AlphaCom
  ...nge, designed to provide critical communications and serve a wide range of applications. <br /> * [[Event Handler]]
  1 KB (155 words) - 13:31, 15 August 2017
• Mooring Conference
  ==== Event Handler programming ==== The conference is started by dialing event trigger 9533 from the Bridge. UDD 500, which contains the current Active Us
  5 KB (837 words) - 14:35, 31 May 2022
• SoftClient
  *Control room applications: No need for an additional intercom device at the desk. Use the computers a ...e to listen to any of these services, add the following event to the Event Handler:
  3 KB (378 words) - 08:19, 5 April 2024
• FBSAR - PA interface
  ...t box, and select the button '''Events'''. Press '''Insert''' to create an event with the following parameters (here RCO 1 is used as an example): [[File:Application_A3a.png|500px|left|thumb|Event for operating the RCO]]
  3 KB (428 words) - 11:01, 1 June 2022
• Free Seating
  The '''Free Seating''' system runs on standard [[AMC]] SW using the [[Event Handler]] and the [[AlphaPro]] WACS module for swapping two users. The [[Event Handler]] is used to activate and send [[AlphaNet Data Protocol]] data messages to
  8 KB (1,173 words) - 11:31, 1 June 2022
• Door Opening - Configuration example
  ==Creating Event for Door Opening == ...list to the left. Then select the button '''Events'''. '''Insert''' a new event with the following properties:
  7 KB (1,107 words) - 11:16, 24 October 2023
• Audio Monitoring - Scanning
  * DAK1 = Leave blank in the DAK table (key press is triggering event 30) * DAK2 = Leave blank in the DAK table (key press is triggering event 30)
  9 KB (1,426 words) - 17:54, 2 February 2023
• Timed Signalling and Messaging
  The built-in [[Scheduler (Event Type)|Scheduler]] function in [[:category:ICX-AlphaCom Platform|ICX-AlphaCo Typical applications:
  5 KB (712 words) - 20:36, 22 July 2022
• Recording of conversations using Duplex Conference and AGA board
  * In order to make the [[Event Handler]] programming very general the [[AGA]] ports should be assigned directory n === Event Handler programming ===
  7 KB (1,079 words) - 11:13, 8 July 2022
• Delayed call from analogue station
  The Delayed Call functionality is controlled by the [[Event Handler]], which is configured from [[AlphaPro]]. '''Event 1''' - When the ID+M (= subevent 2) call button is pressed (= ON), start a
  3 KB (533 words) - 10:39, 1 June 2022
• CRM IV - Control Room Master
  ...select the CRM IV in the list box, and press '''Events'''. '''Insert''' an event as described below. |width="100pt"|'''Event Owner''':
  5 KB (699 words) - 14:39, 14 June 2018
• Mobile radio interface
  .... The relay in the interface is controlled by the RCO command in the event handler. The relay outputs of the interface needs to be mapped to a logical RCO. ...stbox, and select the button '''Events'''. Press '''Insert''' to create an event with the following parameters (here RCO 1 is used as an example):
  6 KB (869 words) - 11:26, 24 May 2023
• Silent Alarm
  Configure the Alarm Button to dial event trigger number 9534 (feature 52). The number 9534 is included in a default == Event Handler configuration ==
  12 KB (1,938 words) - 17:11, 4 January 2023
• Visitor Intercom - Remote call setup and Listen-In
  Due to the Event Handler configuration used in this application, a strict number plan must be follow *The "Call setup", "Listen-In" and "Record" are Event Triggers, feature 52.
  11 KB (1,810 words) - 11:53, 10 February 2023
• Send SMS messages from ICX-AlphaCom
  ...forwarded to a dummy station, which will queue the call and via the event handler send the SMS message. If there are several simultaneous call requests, a SM ...current mail is deleted ($CANM). If there are more calls in the queue, the event "New current mail" will be re-triggered, causing a new SMS to be sent. This
  13 KB (1,988 words) - 12:08, 23 February 2023
• Direct access key
  * The number of an event trigger ...mming can be used to solve such applications ([[Event Trigger (Event Type)|Event Trigger Feature]]).
  13 KB (1,131 words) - 08:12, 22 September 2022
• WK20 - Applications
  ...d off by an [[RCO - Set Remote Control Output|RCO command]] in the [[Event Handler]]. ...tory number in the list box, and press the button 'Events'. 'Insert' a new event with the following attributes:
  15 KB (2,245 words) - 13:44, 5 July 2022
• Elevator alarm to external phone with voice identifcation
  The application is suitable not only for elevators, but also for other applications, such as: == About the Event Handler programming ==
  15 KB (2,374 words) - 12:09, 24 February 2023
• Two Line Names
  * Event handler %1.NAM [[Category:ICX-AlphaCom Applications]]
  4 KB (606 words) - 12:59, 24 May 2022
• Pocket Paging in a Hospital
  ...example where number 651 is given feature 85 ([[Event Trigger (Event Type)|event trigger]]): ...ay of the Pocket Pager receiver defined for the station that triggered the event (i.e. the door station next to the Ambulance entrance).
  8 KB (1,320 words) - 14:46, 31 May 2022
• Tetra - Text Alarms from AlphaCom
  [[Image:TetraTextStartup.PNG|thumb|left|500px|Event 27/65 is triggered when AlphaCom starts up]] === Input event ===
  8 KB (1,267 words) - 11:24, 9 February 2023
• ITSV-4/5 as Paging Station for PAVA
  ===Advanced Output Handler === Using the advanced output handler for the IP-LCM we configure the relays to go on when there is an incoming c
  14 KB (2,142 words) - 15:54, 26 October 2023
• VS-SDK for AlphaCom
  ...tegration of 3rd party software with ICX as easy as possible. Three sample applications are delivered including source code. These 3 samples cover many (if not all *The latest bundle of example applications including source code
  21 KB (3,189 words) - 01:08, 11 October 2022
• CRM V - Control Room Master
  The '''CRM-V''' Station is designed for control room applications. This article describes how to configure the CRM-V station when used with a ...d when the Station Type is set to "CRM", but can be enabled by creating an event with the following parameters:
  12 KB (1,835 words) - 14:12, 26 April 2024
• Devices - Message Sequences
  3 0x03 Control Handler PC with call queuing features ...t the dir.no from the remote exchange. This can be solved using the Event Handler to send DP messages.
  13 KB (1,946 words) - 08:21, 8 September 2017
• Substations calling external telephone(s)
  ...swered, and to set up the next call. The event [[Private Ringing Outgoing (Event Type)|33 - Private Ringing Outgoing]] is reported OFF with subevent = 0 whe [[File:Dial Sequence.PNG|left|thumb|500px|Event 33 is used to manage the sequence of calls]]
  9 KB (1,398 words) - 12:28, 24 February 2023
• Unlock two doors using one station
  ...in the ICX-AlphaCom, but the digits will be reported in the Event Handler, event 25. ...le). Multiple calling stations will require multiple like events (i.e. one event for each calling station).
  10 KB (1,634 words) - 16:21, 23 June 2023
• New fields (AlphaPro 10.27)
  ...can be used. Only need to be changed if conflicts with other multicasting applications on the same net. Alphacom may use up to 31 adresses following the base-addr ...messages will be forwarded to the specified node. Useful for Call Handler applications like [[AlphaVision]] used in [[AlphaNet]], which relies on status informati
  6 KB (1,004 words) - 17:23, 13 December 2017
• PrisCom station - Configuration
  ...ase as a starting point. The advanced features is depending a lot on Event Handler programming, and much work is saved by using an already preconfigured datab *The event handler programming in the PrisCom database will automatically set “Two tone DAK
  43 KB (6,436 words) - 11:02, 20 September 2022
• AlphaVision
  [[File:Picture1.png|thumb|right|600px|AlphaVision Call Handler]] the AlphaCom exchange and commands to start external applications. Script
  60 KB (10,036 words) - 10:55, 7 February 2023
• AlphaCom 9.xx - Release Notes
  ''' BZ 74. Event handler trig problems on Proxy stations without local directory number'''<br /> Code for resolving of "related to" stations in event handler operation is copied from AMC IP 1043.
  39 KB (6,123 words) - 05:41, 8 March 2022
• System integration - Implementation
  * '''Special case: Privacy ringing''': In some simple Control Room applications it’s possible to let substations call the Control Room station directly. The way around this is to use each exchange’s Event Handler. Here you can monitor events like “received
  18 KB (3,048 words) - 07:15, 30 March 2022
• Users & Stations (AlphaPro)
  ...ent_description_-_Event_Trigger_w._digits_.28105.29_or_PNCI|Event Handler, event 25]], and can be used for remote control operations during a call. ...discovered by the [[OPC Server]] or by the [[VS-SDK for AlphaCom]], or any applications using the SDK, such as [[VS-Operator]]. The station will not consume any [[
  46 KB (7,340 words) - 17:22, 19 February 2024
• AlphaPro 11.6.x - Release Notes
  ==={{MTN|1092}}: Text on event 30 is changed=== ==={{MTN|306}}: Send/Get char + and € in event actions fails===
  14 KB (1,941 words) - 05:30, 8 March 2022
• AlphaCom 8.xx - Release Notes
  ...SPA definition or due to communicatio error can make the AlphaCom protocol handler block sending of new pager messages. '''Key trigger event FEAT_DIGIT_EVENT(105): Added start event:'''<br />
  44 KB (7,051 words) - 05:35, 8 March 2022
• Stentofon Simple Link Layer
  ...dditions and simplifications are allowed to facilitate Operator (and Event Handler Action String) use. Example when used from Event Handler, using parameters to let the source exchange look up names:
  17 KB (2,713 words) - 14:54, 7 September 2017
• AsaCom - AlphaCom interface
  ...ntrol of internal watchdog. The RS485 port(s) can be used for optional ASA applications such as Alarm Call. <br/< :'''Com_EBUS = 8;''' Internal USB port for ETCB RS485. Used for special ASA applications, i.e. ‘Alarm Call’. Set = '''0''' if not used.
  30 KB (4,608 words) - 10:23, 11 January 2017
• Exchange & System (AlphaPro)
  ...Present (Event Type)|Priority Mail Present]] and [[Priority Mail in Idle (Event Type)|Priority Mail in Idle]], and sets the minimum priority level required ...ation errors will still be reported via [[Faulty Station Line (Event Type)|Event 13 - Faulty Station Line]], and to Supervisor station defined in "Faulty Li
  67 KB (10,588 words) - 14:04, 3 January 2024
• AlphaPro 3.xx - 9.xx - Release Notes
  ...f / on, WACS will not come online again. This is a problem in free seating applications were WACS need to be online for the feature to work. This problem is now co '''Added Dirno 9545 "Digit Event" in autoload:'''<br />
  93 KB (14,897 words) - 05:26, 8 March 2022
• AlphaCom 10.xx - Release Notes
  ===Issue 3235: Audio Event In AlphaNet=== When calling a station in a different node, event type audio and always programmed in the called node is not triggered.
  55 KB (8,447 words) - 05:42, 8 March 2022
• AudioCodes MP114/118, v5.4 and higher
  * Open the ‘FXO Settings’ page item in '''Configuration''' tab > '''Advanced Applications''' menu > '''FXO Settings''' page item and enable the relevant detection me The Door Opening feature is programmed in the Event Handler. There are two separate events for the door opening feature, depending on w
  36 KB (5,531 words) - 15:49, 15 October 2019
• AlphaCom 5.xx - 7.xx - Release Notes
  ....60 versions: the event "Priority mail in idle" is never reported off. The event Priority Mail is not reported at all. Corrected.<br /> ...sible to change the text of a directory number from data-protocol or event handler. Format :
  94 KB (14,809 words) - 05:36, 8 March 2022