Actions

Special

Search results

Create the page "SIP Intercom Configuration" on this wiki! See also the search results found.

Page title matches

  • Configuration guide for School IP Intercom (SIP)
    {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...r the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (313 words) - 17:25, 31 January 2023

Page text matches

  • Cisco Call Manager 6 configuration
    {{S}}Software requirement: The SIP intercom must have firmware 01.11.x.x or later. [[Image:SIP Intercom 3.PNG|thumb|350px|SIP Intercom Configuration - User Information]]
    3 KB (405 words) - 12:40, 15 August 2022
  • Cisco Call Manager 8 configuration
    {{S}}Software requirement: The SIP intercom must have firmware 02.02.3.1 or later. [[Image:Cisco8_1.png|thumb|left|500px|SIP Intercom Configuration - User Information]]
    3 KB (430 words) - 15:31, 13 March 2018
  • Turbine Configuration
    The [[:Category:Stations#Turbine_stations|Turbine Intercom stations]] can be set to operate in one out of three different modes: * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    399 bytes (57 words) - 14:31, 30 June 2022
  • School IP Intercom - 1402001000
    [[image:1402001000.PNG|right|250px|IP School Intercom]] * [[IP Flush Connections|Intercom connections]]
    2 KB (322 words) - 09:48, 16 August 2022
  • Configuration guide for School IP Intercom (Pulse)
    {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...r the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (312 words) - 17:25, 31 January 2023
  • Configuration guide for School IP Intercom (SIP)
    {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...r the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (313 words) - 17:25, 31 January 2023
  • Configuration guide for IP Hotline (SIP)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP stations, see: * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    1 KB (167 words) - 14:07, 23 February 2024
  • IP Flush Master v2 - External Loudspeaker
    ...the top right corner. Then navigate to '''Advanced ICX-AlphaCom'''/'''SIP Configuration''' --> Audio Settings. ...normal audio and alarm audio (audio override) must be adjusted in the web configuration.
    748 bytes (100 words) - 08:55, 16 August 2022
  • Configuration guide for School IP Intercom (Edge)
    {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...r the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (309 words) - 17:24, 31 January 2023
  • TFTP Provisioning (SIP)
    ...used in '''SIP mode''', an IP station may be set up to automatically pull configuration from a TFTP server. The IP address of this TFTP server can be obtained usin ...ceives configuration via TFTP provisioning it will automatically switch to SIP mode.
    2 KB (252 words) - 09:22, 22 October 2019
  • ACTPro by acre security
    Zenitel video devices connect in SIP mode to ACTpro through ACTentry. ==Configuration==
    5 KB (776 words) - 10:01, 12 May 2023
  • IP Hotline Station - 1008070000
    * [[IP Hotline Connections (INCA)|Intercom connections]] ==Configuration==
    2 KB (258 words) - 14:18, 12 February 2024
  • Upload Certificate
    ...describes how to upload a certificate to the Turbine station for use with SIP TLS. *Select '''''SIP Configuration''''' tab and from the left hand menu select '''''Certificates'''''. The Tur
    675 bytes (94 words) - 14:33, 23 November 2020
  • Test report Ascom IP-Dect
    * Caller id: Missing name in intercom display when receiving calls from Dect. The number is shown, but not the na ==== System Configuration ====
    2 KB (275 words) - 15:00, 25 September 2007
  • Cisco Call Manager 10 configuration
    {{S}}This article describes how to add a Stentofon Intercom station to Cisco Unified Call Manager 10. Please note that this is the minimum configuration to get a Turbine station successfully registered to a Cisco Call Manager.
    4 KB (650 words) - 15:30, 13 March 2018
  • Cisco Call Manager 11.5 configuration
    {{S}}This article describes how to add a Zenitel Intercom station to Cisco Unified Call Manager 11.5. Please note that this is the minimum configuration to get a Turbine station successfully registered to a Cisco Call Manager.
    4 KB (650 words) - 16:34, 16 June 2023
  • SIP intercom registration methods
    ==SIP Intercom Registration methods== This article describes the different methods for SIP registration on Zenitel IP stations.
    2 KB (323 words) - 09:25, 22 March 2023
  • Advanced Configuration Mode (SIP)
    ...stem, some additional settings are available when entering the '''Advanced Configuration Mode'''. <br> * Script configuration
    1 KB (148 words) - 11:19, 12 January 2024
  • Permanent Audio Stream
    The configuration web page for '''Permanent Audio''' is hidden: <ipaddress>/goform/zForm_stre ...sible to make only calls created using specified DAKs enable the stream in SIP mode.
    840 bytes (126 words) - 15:50, 25 November 2020
  • Configuration guide for IP Hotline (Pulse)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP stations, see: * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    1 KB (175 words) - 14:50, 30 June 2022
  • Listen in (SIP)
    Turbine stations has a "Listen in" feature in SIP mode. If the station receives “X-Zenitel-Audio: listener” in a SIP INVITE message it means that the call will not be visible in the station an
    1,011 bytes (153 words) - 08:51, 28 September 2017
  • IP Video Door Station - 1401110200
    * [[IP Video Doorstation Connections|Intercom connections]] ==Configuration==
    2 KB (220 words) - 09:41, 16 August 2022
  • ECP-AA1
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    1 KB (172 words) - 12:09, 23 June 2023
  • IP Desktop Station with Video Display - 1408001635
    * [[IP Video Desk Connections|Connecting the Intercom station]] *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (260 words) - 09:25, 16 August 2022
  • SIP phone: Forward unattended call
    ...d SIP calls. In order to work, it requires that the SIP device returns the SIP status "180 Ringing" when the phones starts to ring, and "200 OK" when conn * [[Configuration guide for STENTOFON IP-DECT|IP Dect System 6000]]
    2 KB (278 words) - 12:21, 24 February 2023
  • IP Video Door Station - 1401110100
    * [[IP Video Doorstation Connections|Intercom connections]] ==Configuration==
    2 KB (243 words) - 09:24, 16 August 2022
  • Gallagher
    This article is to describe the configuration of the Zenitel device to work with the Gallagher solution. The Gallagher server acts as a SIP client with no registration.<br>
    2 KB (275 words) - 00:57, 3 February 2023
  • Tetra and ICX-AlphaCom interfacing
    ...d allows point to point calls from individual radio handsets to individual intercom units, and vice versa. ...pressing the M-key (= PTT) on the intercom station. When talking from the intercom station, the PTT of the radio gateway will be operated. Which talk group yo
    2 KB (307 words) - 09:51, 13 February 2024
  • Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000
    * [[IP Sub Connections|Intercom connections]] ==Configuration==
    2 KB (201 words) - 09:20, 16 August 2022
  • OLED Labels
    * In SIP or Edge mode, select '''SIP Configuration''' > '''OLED Labels''' [[Category: Turbine Configuration]]
    1 KB (150 words) - 17:09, 24 March 2021
  • IP Substation Kit - 1008090200
    * [[IP Sub Connections|Intercom connections]] ==Configuration==
    2 KB (214 words) - 09:21, 16 August 2022
  • IP Master Station Kit - 1008093000
    * [[IP Flush Connections|Intercom connections]] ==Configuration==
    2 KB (211 words) - 11:43, 21 November 2023
  • Firewall (IP Stations)
    {{note|[[Advanced Configuration Mode (Edge)|Advanced Configuration Mode]] must be enabled to access the Firewall on the Zenitel IP stations}} | '''SIP''' || || TCP || 5060 || ON
    2 KB (191 words) - 16:22, 12 September 2023
  • IP Heavy Duty Station
    ==Configuration== General configuration:
    2 KB (268 words) - 13:30, 26 June 2023
  • Microsoft Teams - Cybergate integration
    Zenitel TCIS and TCIV+ intercom stations connect to MS Teams through CyberGate SaaS. The stations connect directly to Cybergate in SIP mode.
    2 KB (311 words) - 09:43, 14 April 2023
  • Avaya Communication Server CS1000E
    Configuration guide: [[Avaya-Nortel CS1000 v. 7.6]] [[Category: SIP intercom - iPBX integrations]]
    358 bytes (44 words) - 13:36, 28 February 2019
  • Call and Relay operation by URL
    In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. [[Category: SIP intercom - Configuration]]
    911 bytes (120 words) - 10:01, 13 September 2019
  • IP Hotline Station - 1008070010
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (203 words) - 14:32, 12 February 2024
  • Manually Added Devices (Edge)
    ...devices]]||3rd party SIP||Any 3rd party SIP device (SIP phone, softphone, SIP Speaker etc) must be manually added to the system | [[:category:Pulse - Telephone Gateways|SIP Telephone gateways]]||Gateway||[[GSM Gateway (Edge)|GSM telephone gateway]]
    3 KB (485 words) - 10:37, 9 April 2024
  • Uploading HTTPS certificate
    ...e device is in IC-Edge mode, [[Advanced Configuration Mode (Edge)|Advanced Configuration Mode]], must be enabled}} *Select '''Edge Configuration'''/'''SIP Configuration''' and from the left hand menu select '''Certificates'''. The Turbine certi
    2 KB (264 words) - 11:23, 20 March 2024
  • SIP registrar node - configuration
    ...nged, and SIP Registrar node is no longer needed. Please see the article [[SIP phone as station]]''.}} ...ed in one exchange. The SIP registrar node receives REGISTER messages from SIP clients and maintains a list of currently registered clients.
    4 KB (569 words) - 09:35, 16 April 2019
  • Weather and Vandal Resistant IP Substation - 1008042100
    * [[IP Sub Connections|Intercom connections]] ==Configuration==
    2 KB (204 words) - 09:52, 16 August 2022
  • Language Settings (SIP)
    ...''' settings, you must enable [[Advanced Configuration Mode (SIP)|Advanced Configuration Mode]]}} Select '''SIP Configuration''' > '''Language'''. Download the english (or french) version of the langua
    1 KB (212 words) - 12:06, 19 May 2021
  • TEIV-1+
    {{AEIS}}[[file:TEIV-1+ Front.png|right|300px|thumb|Turbine Extended IP Video Intercom with Keypad and Display<br>(1008317110)]] ==Configuration==
    2 KB (229 words) - 17:21, 22 January 2024
  • IP Desktop Master Station - 1008000000
    * [[IP Desk Connections|Connecting the Intercom station]] *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (236 words) - 14:04, 2 May 2023
  • SIP number translation table (AlphaCom)
    ...CSV file, which is used for number translation on incoming and/or outgoing SIP Trunk calls. ...rce of the caller (Caller ID) to be the public phone number instead of the intercom station number.
    3 KB (496 words) - 12:17, 24 February 2023
  • Dynamic Range Compression (DRC)
    For intercom devices and IP Speakers the DRC will normally have a good effect on regular Configuration is done from the Audio Settings menu. First enable '''Advanced Configuration''' mode. Depending on the mode of operations, select:
    2 KB (330 words) - 14:28, 9 November 2023
  • IP Desktop Master Station - 1008001000
    * [[IP Desk Connections|Connecting the Intercom station]] *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (240 words) - 14:05, 2 May 2023
  • Transparent Mode DAK-Key Configuration
    ...), the dialed digits are sent transparent through the AlphaCom, out on the SIP Trunk. ...example if one wants to make a [[Inquiry Call feature|call transfer]] (2 + intercom number + 3) or [[Blind Transfer During Connection|blind transfer]] after th
    2 KB (279 words) - 12:16, 23 February 2023
  • Genetec Sipelia - ICX-AlphaCom integration
    ...ty Center Software to ICX-AlphaCom or AlphaCom XE and intercom stations in SIP-mode. Sipelia is a small IPBX. Security Center operator positions have a SIP-client which register with Sipelia.
    2 KB (302 words) - 15:07, 26 June 2023
  • TEIV-4+
    {{AEIS}}[[file:TEIV-4+ Front.png|right|300px|thumb|Turbine Extended IP Video Intercom with RFID card space<br>(1008318240)]] == Configuration ==
    2 KB (219 words) - 12:36, 28 November 2023
  • Clean room intercom station IP-CROR
    The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean rooms. * [[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (233 words) - 15:09, 30 April 2024
  • Weather and Vandal Resistant IP Substation - 1008041100
    * [[IP Sub Connections|Intercom connections]] ==Configuration==
    2 KB (219 words) - 13:31, 26 June 2023
  • Keyboard Settings
    * Select '''SIP Configuration''' -> '''Keyboard''' (SIP mode), or * Select '''Advanced SIP''' > '''Keyboard''' (SIP mode), or
    2 KB (267 words) - 13:34, 23 November 2020
  • Volume and handset override (SIP)
    ...e and handset override can be activated when receiving [[Multicast Paging (SIP)|Multicast Paging]] by setting the Priority = Emergency. [[Category: SIP intercom - Configuration]]
    642 bytes (99 words) - 15:25, 12 September 2019
  • IP Master Station Kit - 1008493000
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    1 KB (170 words) - 15:15, 23 June 2023
  • Configuration guide for IP Heavy Duty (SIP)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP stations, see: * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    4 KB (557 words) - 14:49, 30 June 2022
  • Time Settings (SIP)
    * Select '''SIP Configuration > Time Settings''' from the menu [[File:SIP-Time Trbn.PNG|thumb|left|500px|Time Setting in a Turbine station]]
    1 KB (186 words) - 14:27, 23 November 2020
  • VLAN Tagging (IEEE 802.1Q)
    [[IP Station VLAN Configuration Guide]] [[Category:INCA Station Configuration Guide]]
    901 bytes (130 words) - 08:12, 5 April 2022
  • Vandal Resistant intercom - VR3G-1
    ==Configuration== General configuration:
    2 KB (230 words) - 15:47, 8 September 2023
  • IP Desk Master -V2
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (207 words) - 13:37, 29 January 2024
  • IP Desk Master -V2-P
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (209 words) - 13:37, 29 January 2024
  • ENA2060 Amplifier
    ...enable the use of the same software for handling both Passenger Emergency Intercom / Crew Communication and Public Address (PA), as well as the required Train ==Configuration==
    2 KB (270 words) - 09:55, 16 August 2022
  • Active Noise Cancellation (ANC)
    ...ture is by '''default active''', hence there is normally no need to do any configuration. ...the [[Edge Controller]], and navigate to '''Edge Controller''' > '''System Configuration''' > '''Call and Audio'''. The ANC feature can be disabled (or enabled) per
    3 KB (380 words) - 15:31, 25 October 2023
  • ELSII-10H
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (204 words) - 12:51, 23 June 2023
  • IP Desk Master -V2 w/handset
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (222 words) - 13:49, 29 January 2024
  • Door Opening feature (Edge)
    ...Door Stations by default are configured to trigger on DTMF "6", no special configuration is required for the Door Opening feature. ...to use, or the pulse time of the relay, from the web interface of the door intercom station:
    1 KB (180 words) - 12:34, 16 September 2019
  • ELSIR-10C
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (206 words) - 12:51, 23 June 2023
  • TKIS-2
    ...ed TKIS-2 Turbine Kit VoIP Intercom Module can be used to build customized intercom or help point solutions. It is also used as an interface towards external P ==Configuration==
    2 KB (292 words) - 14:51, 29 January 2024
  • TKIV+
    {{AEIS}}[[file:TKIV+-newZ.png|right|300px|thumb|Turbine Video & VoIP Intercom Module<br>(1008331010)]] The TKIV+ VoIP kit enables you to build your own IP Intercom video station or Help-Point with HD camera.
    2 KB (336 words) - 14:44, 29 January 2024
  • Virtual I/O (SIP)
    * Script Configuration ...tations#Turbine_stations|Turbine station]] operating in '''Pulse''' and '''SIP''' mode.
    3 KB (457 words) - 09:51, 7 January 2020
  • IP Desk Master -V2-P w/handset
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (229 words) - 13:47, 29 January 2024
  • IP Flush Master - Call Queuing (SIP)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP Flush Master station, see: * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (395 words) - 13:29, 12 September 2022
  • IPVRS-1
    ==Configuration== General configuration:
    2 KB (244 words) - 12:27, 29 January 2024
  • Backup and Restore (IP Stations)
    ...the web interface of the station it is possible to backup and restore the configuration data. == Download XML Configuration File ==
    2 KB (247 words) - 12:06, 5 October 2023
  • TFIX-4
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (239 words) - 09:54, 16 August 2022
  • IP Flush Master -V2
    * [[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (312 words) - 14:00, 29 January 2024
  • IP Dual Display Station - 1008007000
    {{Note|When used in IC-Edge, Pulse or SIP mode, only 10 Direct Access Keys are supported }} * [[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (301 words) - 12:51, 28 November 2023
  • TFIE-6
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (230 words) - 12:52, 28 November 2023
  • TCIA-2
    The TCIA-2 is an IP based intercom with an analog front board intended for areas where exposure of the physica {{AEIPS}}[[file:TCIS-2newZ.png|200px|thumb|Analog over IP Intercom<br>(1008113020)|alt=]]
    3 KB (379 words) - 15:12, 29 January 2024
  • IP OR Master Station - 1008015000
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (250 words) - 14:06, 2 May 2023
  • TCIS-6
    ==Configuration== General configuration:
    2 KB (230 words) - 12:47, 28 November 2023
  • TCIS-4
    ==Configuration== General configuration:
    2 KB (230 words) - 12:46, 28 November 2023
  • TCIS-5
    ==Configuration== General configuration:
    2 KB (230 words) - 12:46, 28 November 2023
  • IP Heavy Duty Station V2
    ==Configuration== General configuration:
    2 KB (269 words) - 14:37, 29 January 2024
  • Door Opening feature (Pulse)
    ...Door Stations by default are configured to trigger on DTMF "6", no special configuration is required for the Door Opening feature. ...to use, or the pulse time of the relay, from the web interface of the door intercom station:
    1 KB (201 words) - 16:35, 12 September 2019
  • Vandal Resistant intercom - VR3G-1P
    ==Configuration== General configuration:
    2 KB (274 words) - 09:35, 7 March 2024
  • TMIS-2
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (224 words) - 12:50, 28 November 2023
  • Automatic Gain Control (AGC)
    ...ariations in the speech level because the talker is at a distance from the intercom station, or talking with a low voice. The AGC feature is providing more amp ...the [[Edge Controller]], and navigate to '''Edge Controller''' > '''System Configuration''' > '''Call and Audio''', and enable/disable "'''AGC'''" per device:
    3 KB (439 words) - 15:57, 25 October 2023
  • Configuration guide for IP Heavy Duty (Pulse)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP stations, see: * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    4 KB (625 words) - 14:49, 30 June 2022
  • Tone Test (SIP)
    ...sing SNMP traps, which must be turned on in the [[SNMP in IP Stations|SNMP configuration]]. * Enable [[Advanced Configuration Mode (SIP)|Advanced Configuration Mode]]
    3 KB (491 words) - 10:59, 9 April 2021
  • ENA2400-AC Amplifier
    == Configuration == * [[ENA Amplifier - Basic configuration (AlphaCom mode)|Getting started (AlphaCom mode)]]
    3 KB (484 words) - 15:30, 29 February 2024
  • TFIE-1
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (216 words) - 12:52, 28 November 2023
  • TFIE-2
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (216 words) - 12:52, 28 November 2023
  • Asterisk configuration
    =Asterisk Configuration(CHAN_SIP)= ==Configuration with UDP/TCP transport protocol and video support==
    5 KB (735 words) - 15:07, 6 August 2020
  • ECPIR-3P
    ==Configuration== General configuration:
    3 KB (315 words) - 14:21, 31 January 2024
  • ECPIR-P
    ==Configuration== General configuration:
    3 KB (313 words) - 14:26, 31 January 2024
  • ENA2200 Amplifier
    == Configuration == * [[ENA Amplifier - Basic configuration (AlphaCom mode)|Getting started (AlphaCom mode)]]
    3 KB (500 words) - 15:29, 29 February 2024
  • ENA2400-DC Amplifier
    == Configuration == * [[ENA Amplifier - Basic configuration (AlphaCom mode)|Getting started (AlphaCom mode)]]
    3 KB (494 words) - 09:52, 16 August 2022
  • Far End Signal Squelch (FESS)
    ...the feature is done from the Audio Settings menu. First enable '''Advanced Configuration''' mode. Depending on the mode of operations, select: *Edge mode: '''Edge Configuration''' > '''Audio Settings''' > '''Audio signal processing'''
    2 KB (346 words) - 14:01, 7 November 2023

View (previous 100 | next 100) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://wiki.zenitel.com/wiki/Special:Search"