Search results
Create the page "AS" on this wiki! See also the search results found.
Page title matches
- {{A}}[[File:SIP phones.PNG|thumb|right|500px|AlphaCom XE as SIP Server]] ...s are related to [[physical number|"physical" numbers]] in the same manner as STENTOFON IP stations.10 KB (1,521 words) - 12:00, 27 February 2023
- ==Configuring IP station as Program Feed== From 11.3.3.1b it is possible to use an IP-ARIO as a program source. To achieve this an IP-ARIO with license registered to the887 bytes (133 words) - 11:22, 2 July 2013
- This article describes how to connect use a VoIP kit as interface to an external amplifier, via the VoIP kit line out. Program an event with the physical position of the TKIS-2 as owner, event type 1 - audio, when change to ON or OFF, when related to All3 KB (544 words) - 14:15, 26 May 2023
- 709 bytes (99 words) - 09:38, 8 October 2019
- ...scribes how the loudspeaker connected to a [[TKIE-2]] kit also can be used as a microphone. To operate the relays, an event must be created with the TKIE-2 kit as the Event Owner:3 KB (438 words) - 09:15, 5 July 2022
- ...cle describes how to configure the ECPIR-3P with optional Expansion Module as a dedicated PA Paging Console ...1 - 3 and 11 - 18 configured with Intercoms and Public Address Amplifiers as required2 KB (342 words) - 14:07, 31 May 2022
- ==Use Inputs As Key Matrix== [[File:IO as matrix ICX.jpg|thumb|right|500px|Diode matrix when using 3 inputs to activa5 KB (721 words) - 13:17, 10 August 2023
- The IP-LCM will be set up as the IC-Edge Controller and in the "Directory" menu given number 100, see [[ After the settings are saved and applied you should see all the accounts as registered on the status page14 KB (2,142 words) - 15:54, 26 October 2023
- ...tain that the station which is defined as operator is known to VS-Operator as an intercom device1 KB (213 words) - 10:49, 24 October 2023
Page text matches
- ...roup_Call.2FAnnouncements|Group Call]]. The feature is active only as long as group call is active.413 bytes (54 words) - 09:43, 8 October 2019
- ==Configuring IP station as Program Feed== From 11.3.3.1b it is possible to use an IP-ARIO as a program source. To achieve this an IP-ARIO with license registered to the887 bytes (133 words) - 11:22, 2 July 2013
- ...e system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any [[:Category:Sta ...such systems please use any other Vingtor-Stentofon IP station type, such as TCIS-x, or TKIS-2. }}672 bytes (111 words) - 17:20, 7 March 2019
- ...ake this work well, the pop-up form must have the following properties set as shown in the image: [[File:VSOP popup.png|thumb|left|500px|Definition of a form as popup window]]679 bytes (112 words) - 10:50, 24 October 2023
- UniCode as UTF-8 currently support for the DIP protocol: AlphaCom ISO 8859-1 characters 0x00 - 0x7F are coded as one byte "UTF-8" coding, no remapping. <br />668 bytes (98 words) - 15:02, 7 September 2017
- ...ing http requests (port 80). This is supported on the AlphaCom server side as from AlphaCom ver. 12503 bytes (70 words) - 10:52, 24 October 2023
- ...can have local station dir. no. (9/x) or a global station dir. no. (83/x) as A-subscriber parameter. If the A-subscriber is a global station dir. no. th This means that the B-subscriber must be defined in that node as a local or global number.861 bytes (134 words) - 10:58, 1 June 2022
- ...GetAll using http requests (port 80). This is supported on the server side as from AlphaCom ver. 12. However, it is possible to open AlphaPro 10 or 11 da * As from AlphaPro version 11.5 there is '''no support for serial communication'930 bytes (133 words) - 15:53, 4 April 2024
- ...ere VLAN Id 10 is used as an example (The VLAN Id is not important as long as two different ID’s are used): ...IP station port, LAN port and AUX port as members. Here VLAN Id 11 is used as an example:2 KB (331 words) - 14:46, 1 November 2016
- ...nnection: Select echo cancel, open duplex, mic only, speaker only, as well as the Station LED. |align=center|2||[[UINT4]]||colspan="3"|Connection option mask as in [[DIP]] "auo" message.907 bytes (135 words) - 16:10, 3 October 2019
- ...and FCDC1/2, FCDC1/2 should be set as "Not CCo", and one FCDC3 must be set as "CCo".}} ...Flowires as forced CCo, <u>then all the others in the cluster must be set as '''not CCo'''!</u>2 KB (320 words) - 13:40, 12 May 2020
- ...mmunication program) runs, which means the log file must be copied as soon as the error has occured and before Wacs (Send/Get) is run again. }}603 bytes (97 words) - 10:54, 24 October 2023
- One single node as well as a complete AlphaCom node network is supported. ...lications interfacing the AlphaCom, [[VS-SDK for AlphaCom]] is recommended as a start.1 KB (183 words) - 11:27, 9 February 2023
- ...mapping MPC commands to AlphaCom commands one-to-one it can be thought of as a variant of the [[Data link layer#Stentofon Simple Link Layer|simple link As from software 11.2.3.5 the MPC input commands also support global numbers,993 bytes (157 words) - 14:24, 7 September 2017
- 255 = Activate "DTMF transmission mode". Succeeding digits are transmitted as DTMF tones 0-9. DAK 1 and 2 will generate "*" and "#". * When parameter 1 = 255 the DTMF tone is transmitted as long as the digit is pressed.2 KB (252 words) - 15:45, 20 May 2022
- ...re, including desktop computers, supercomputers, and embedded devices such as mobile phones and routers.1 KB (190 words) - 08:08, 8 September 2017
- This default error message is sent as a display mail with priority 80. This will trigger event 6 - Priority Mail Present. This event is on as long as there are priority mails in queue, and goes off when queue is empty. Displa1 KB (248 words) - 10:22, 25 May 2022
- ...ormance to accepted standards on .NET assembly naming conventions, as well as namespace naming conventions. Also better separation of functionality like822 bytes (104 words) - 10:33, 26 October 2017
- ...O should be used as an Input or as an Output. By default all I/O's are set as Inputs. ===Use Inputs As Key Matrix===3 KB (394 words) - 10:42, 9 February 2023
- * To define a pin code – create a csv file with 4 digits numbers as shown in the example below: * When saving the CSV file the seperation character should be defined as semicolon (;).973 bytes (164 words) - 09:45, 7 May 2024
- ...O should be used as an Input or as an Output. By default all I/O's are set as Inputs. ...contact (referred to as "NO - Normally Open"). The input can be configured as "Input NC" (NC - Normally Closed) instead. (Requires firmware 8.1.3.0 or la3 KB (457 words) - 11:17, 12 January 2024
- ...tool cannot connect to the required SQL server instance. An error message as displayed in the picture below will be shown. * Check the name of the instance as displayed in Management Studio691 bytes (102 words) - 10:39, 29 June 2023
- ...ker lines. The audio output channels can be monitored for line faults such as shorts circuits and ground faults. * [[VoIP kit as PA Interface]]830 bytes (117 words) - 13:46, 5 July 2022
- Incorrect Recorder Initial Configuration can cause the recorder to act as if it's working, but there are no audio packets recorded. Note that this IP Address also cannot be the link-local address (127.0.0.1), as it's used to direct the ICX-AlphaCom or AlphaCom server to send the audio p693 bytes (109 words) - 09:28, 14 February 2024
- ...O should be used as an Input or as an Output. By default all I/O's are set as Inputs. ...contact (referred to as "NO - Normally Open"). The input can be configured as "Input NC" (NC - Normally Closed) instead. (Requires firmware 8.1.3.0 or la3 KB (465 words) - 11:17, 12 January 2024
- * [[Inputs as Key Matrix (ICX-AlphaCom)]] * [[I/O Settings (Edge)|Inputs as Key Matrix (Edge)]]1 KB (189 words) - 18:09, 14 November 2023
- ...e carrying out the next step in a function. The help message stops as soon as you proceed (i.e. press a key).839 bytes (134 words) - 16:46, 24 January 2017
- ...2FO_Settings|web page of the Turbine device]]. By default all I/Os are set as inputs. ...K|DAK table]], or one can use the [[Event Handler]]. DAK keys are reported as [[Station Input or Station DAK key (Event Type)|Event 30 - Station Input or3 KB (461 words) - 11:21, 23 June 2023
- ...rivate ringing with one-way audio. The break-in function is active as long as the station holds down the M-key. When M-key is released the conversation g806 bytes (116 words) - 09:39, 8 October 2019
- * Returns the [[UDP group]] memberships for station, as a decimal number. * Interpret the number as a bitmap, bit#0 is UDP group 1, bit#7 is UDP group 8.711 bytes (96 words) - 09:46, 4 October 2019
- ...r this station. (C-press in conversation just disconnects the conversation as before). *Disconnect-from-groupcall is also available as a data protocol message [[ST GROUP DISCON]].953 bytes (128 words) - 09:47, 8 October 2019
- ...('''IP-ARIO''') unit has a wide set of hardware functions. It can be used as: ...part of IP-ARIO is used, i.e. when the IP-ARIO is used as PA interface or as a Mobile Radio interface.2 KB (310 words) - 09:18, 16 August 2022
- ...ings properly, check the save path. If it contains special characters such as ü or similar the files will not save.232 bytes (34 words) - 09:28, 14 February 2024
- {{AS}} <nowiki>{{AS}} = AlphaCom + SIP</nowiki>1 KB (150 words) - 15:48, 26 October 2023
- ...IO_M_PATH_SETUP]] from one or more destination exchanges. <br />Reference: As provided in [[AUDIO_M_PATH_SETUP]]. ...rs of (node, status). Node is [[UINT1]]. Status is [[UINT1]], the value is as defined for the status in [[COMMAND_RESPONSE]]953 bytes (130 words) - 14:20, 6 July 2022
- In the screenshot under, All-Call (84) is added as a destination. <br><br> '''Authorization name:'''same as User ID<br>2 KB (313 words) - 09:45, 7 June 2019
- ...haPro, '''Users & Stations''' window, select physical port 4 and configure as follows: ...'', select physical port 4. Then press the button '''DAK''', and configure as follows:860 bytes (119 words) - 10:04, 30 June 2022
- The call button is connected to input 1, and is by default set as input. Input 1 is programmed in AlphaPro as '''DAK 11''' in DAK window, or as subtype 11 in event 30.3 KB (522 words) - 14:46, 10 February 2022
- ...user info given in parameter 1 (either as explicit node number L(2)101, or as a global number L9501 which points to node 2) Note: Does not work well with ATLB (telephones), as it bypasses private ringing!2 KB (363 words) - 13:40, 10 December 2019
- ...e video stream from the inbuilt camera. The video stream is active as long as the call is active. It is even possible to view the video without setting u ...'Enter VoIP username''': ''The directory number the mobile should register as in the AlphaCom''3 KB (521 words) - 12:44, 9 June 2022
- ...as some limitations with respect to bug fixing and alpha and beta testing. As from the 10.60 release a new versioning system is introduced. ...4-digit version numbering has also been introduced for IP Station software as from version 01.09.x.x.2 KB (264 words) - 08:28, 8 September 2017
- The call button is connected to input 1, and is by default set as input. Input 1 is programmed in AlphaPro as DAK 11 in DAK window, or as sybtype 11 in event 30.3 KB (548 words) - 12:51, 5 October 2023
- ...ongoing call and setup a new conversation. <br>To start a new conversation as inquiry use [[Auto_Inquiry | Auto Inquiry]]<br> From 13.1.3.1: If during conversation, pressing the same DAK key as used for starting the call, the [[Cancel Call by pressing call button durin988 bytes (142 words) - 14:15, 5 July 2022
- Ingress protection classification is most commonly known as the IP code (IEC 529). Even though it is intuitive to believe that the abbr ...dust are allowed to ingress, but only in places where it can be considered as not harmful for the device.3 KB (424 words) - 09:14, 30 June 2022
- ...red in the same exchange as the station to be transfered. (Same limitation as transfer activated from station.)1 KB (159 words) - 12:53, 30 June 2022
- [[File:1-4e solution1.PNG|thumb|left|500px|Set the station 104 as Defualt Member and Default Speaker of conference 1. Dial 8201 to monitor st [[File:1-4e solution2.PNG|thumb|left|500px|Set the station 302 as Defualt Member and Default Speaker of conference 2. Dial 8202 to monitor st910 bytes (126 words) - 10:05, 30 June 2022
- ...low; Now the total number of connections in an AlphaNet has the limitation as below, where it is possible to use a single port on a single server to prov * As from AMC-IP software version 12.3.3.2 and ICX-AlphaCom 1.0.3.0 it is possib2 KB (306 words) - 12:20, 25 March 2020
- * '''Default Member''': As soon as one or more users join the conference, this user will be forced into the co ...erence in "talk mode", i.e. he will feed audio into the conference as long as no other users are talking (i.e. pressing the M-key)3 KB (525 words) - 16:05, 27 September 2019
- ...all requests by pressing M-key. In this way the operation will be the same as for direct calls in private ringing mode. ...ck the ''Insert'' button and create an event with the Control Room station as the event owner, and the following properties:1 KB (166 words) - 11:12, 8 July 2022
- * Data communication between ICX-AlphaCom and External Devices such as [[RIO]]s and PC based Control Handlers ...nternal control of the ICX-AlphaCom. [[Event Handler]] can use DP messages as general [[Event Handler#Action Commands|Action Commands]].3 KB (402 words) - 14:10, 18 October 2023
- * Input 1 is programmed in AlphaPro as '''DAK 11''' in DAK window. The example shows DAK 11 calling stations in [[ * Or as subtype 11 in event 30. The example shows input 1 calling station 101 using3 KB (528 words) - 16:01, 10 May 2023
- ...ePlug AV] power line communications specification, only using 24 - 48 V DC as the medium. It is a network bridge between Ethernet and a PLC link. ...onverter is also capable of powering Ethernet devices attached to it, such as IP intercom stations or IP cameras.2 KB (239 words) - 15:28, 10 May 2022
- One AlphaCom "card cage", contains up to 26 circuit boards (such as [[ASLT]], [[AMC]], [[APC]], [[AGA]]).284 bytes (41 words) - 09:08, 30 June 2022
- |AUX || 10/100 Mbps RJ-45 ports for auxiliary equipment such as PC and IP camera. :* AUX port (P2): for connecting to auxiliary equipment such as a PC or IP Camera.1 KB (207 words) - 15:10, 5 February 2018
- Up to 10 3rd party SIP devices, such as SIP phones, SIP Speakers, Soft Phones etc., can be registered to an [[:cate * Modify Number and Name as required (a default Number and Name will be inserted, which you can modify)3 KB (469 words) - 12:07, 24 October 2023
- ...technique requires the receiver to respond with an acknowledgment message as it receives the data. The sender keeps a record of each packet it sends, an ...ivery, and it is not particularly suitable for real-time applications such as [[Wikipedia:Voice over IP|Voice over IP]]. For such applications, protoco4 KB (710 words) - 14:46, 5 February 2018
- This new version from Advosol provides more secure OPC-UA connections as it enables the PC-UA development platform to generate more safe certificate The AlphaNet OPC Server does not support configuring an event as a ”Condition”-event. Only “Simple” and “No-Event” are supported4 KB (528 words) - 14:02, 22 March 2024
- ...r/slave ([[MultiModule]]) configuration. One of the modules plays the role as a master, while the other modules are slaves. Communication with the world268 bytes (42 words) - 09:06, 30 June 2022
- ...tory numbers. Substations are useful in a wide range of applications, such as door stations with one key or elevator alarm stations programmed to call or * Key no 3 on substation 1000 704400 will not work as it makes use of the ID + LT signal, which is not supported by the AlphaCom900 bytes (144 words) - 16:30, 24 January 2017
- ...ly choose level 4. You will see all SIP messages on the SIP trunk, as well as the internal messages between the SIPd (the internal SIP server running on ...ly choose level 4. You will see all SIP messages on the SIP trunk, as well as the internal messages between the SIPd (the internal SIP server running on2 KB (279 words) - 12:10, 24 October 2023
- ...tation_Configuration#RCI_-_Remote_Control_Input|IP substation call buttons as M- and C-key]] *AMC 11.2.3.9 and lower: Input 1-6 are reported as Subevent number 1 - 62 KB (292 words) - 14:25, 24 May 2022
- I/O #1 is used as an input to detect the hook switch275 bytes (42 words) - 13:26, 23 June 2023
- ...o the {{AlphaWiki|ASVP - AlphaCom Stored Voice Playback Board}} running as as SW module on the {{AlphaWiki|AMC-IP - AlphaCom Processor Board}}. Like the The names are used in the file names like this (using English as the example):3 KB (464 words) - 14:25, 5 February 2018
- ...s a generic format handling both main AlphaCom Software components as well as other add-on software components.1 KB (170 words) - 02:53, 30 March 2022
- ...command must be sent to the node of the ''queuing'' station, using @<node> as a prefix, where "node" is hex value of the node. Using @'''U'''<node>,"node Same as above, but the sender will be put in Call Requester mode:3 KB (469 words) - 10:52, 1 June 2022
- **'''DTMF tab''': Send DTMF as INFO method ...r ID. Enter the global number ([[Call remote station feature|feature 83]]) as entered in AlphaPro1 KB (173 words) - 10:13, 16 August 2022
- ...here the operator hear his own announcement from nearby VoIP devices, such as IP Speakers, Intercoms, or a PA system connected via a VoIP interface. As from '''firmware ver. 7.5.3.1''' the device software has been tuned, makin3 KB (500 words) - 15:47, 25 October 2023
- *Connect the computer to the same network as the phone :'''SIP User ID''': The directory number of the phone. Must be the same as entered in the Users & Stations list in AlphaPro4 KB (604 words) - 22:31, 10 October 2017
- :- The event 09 stays ON as long as the station is ringing. It behaves differently from the event 01 Audio - Pr1 KB (163 words) - 12:34, 8 October 2019
- ...Messaging#Upload_customized_wav-files_from_AlphaWeb|uploaded to the AMC-IP as an alarm message]]. A basic or enhanced [[Licenses#Audio_Messaging_License| ...gnal.<br> The private ringing cannot be removed for a single station, only as a global setting for the whole exchange.}}2 KB (290 words) - 10:54, 5 May 2023
- ...r Emergency Intercom / Crew Communication and Public Address (PA), as well as the required Train Radio Integration, thus eliminating one entire subsystem ...lifier is a "Turbine" device, and the software is upgraded in the same way as Turbine Intercom stations.2 KB (270 words) - 09:55, 16 August 2022
- The Open Door script as described in early versions of the manual, and as part of standard scripts in early VS-Operators itself, does not work for bo1 KB (177 words) - 10:38, 29 June 2023
- * Length as required355 bytes (52 words) - 10:54, 23 October 2019
- * '''Users''': This report contains information about intercom users, such as physical number, directory number an display text. ...stem. It includes directory number and display text of each group, as well as the chime signal.2 KB (359 words) - 17:17, 3 January 2018
- Push buttons for start and stop message are wired as shown below. # Set the IP Speaker as an [[Edge Controller]]5 KB (692 words) - 12:33, 25 March 2022
- 5 speakers, including cable for VoIP kits, such as [[TKIS-2]] and [[TKIE-2]].356 bytes (44 words) - 15:57, 5 May 2023
- ...tain that the station which is defined as operator is known to VS-Operator as an intercom device1 KB (213 words) - 10:49, 24 October 2023
- ...e video stream from the inbuilt camera. The video stream is active as long as the call is active. * '''Phone number''': ''The directory number the SIP Client should register as in the AlphaCom''3 KB (507 words) - 18:06, 11 February 2017
- * Returns the station [[Directory number]], as a decimal number.406 bytes (60 words) - 09:45, 4 October 2019
- ...gh, lift the station out, making sure to keep the station at an even plane as it is lifted out from the backbox. '''''Caution! Do not lift the station at an angle as this may damage the pegs.'''''1 KB (218 words) - 00:27, 17 March 2017
- ...hese settings as part of the connection URL. The frame rate and resolution as set on the CP-CAM web page will be used.1 KB (171 words) - 08:59, 16 August 2022
- ...When you reboot the station it will revert to the previous number as soon as it makes contact with the ICX-AlphaCom. The same result regardless of chang1 KB (190 words) - 10:11, 14 December 2022
- ...the speaker and microphone of the front panel of the TFIE station, as well as to the headset speaker. The headset microphone is disabled. In this mode the audio will be routed to the headset as soon as the headset is physically connected. Audio in the front panel will be muted2 KB (399 words) - 12:17, 23 June 2023
- Using the same hardware setup and group configuration as described in the [[Integration with ASL PAVA using the TKIE-2 kit]] article Create an scheduler event as shown in the picture below.1 KB (187 words) - 12:11, 17 November 2023
- ...for Ubuntu 22.04.x LTS Server containing the same functional capabilities as the ICX-500 Intelligent Gateway platform. ==Enhancements and Fixed Issues for ICX-Gateway used as Primary System Controller (PSC) in Exigo==3 KB (480 words) - 13:56, 21 February 2024
- * ''The .csv file must use ";" (semicolon) as field delimiter'' ...number'''> will be added as a feature 9 number with the <'''id number'''> as physical number.5 KB (702 words) - 13:02, 13 May 2020
- ...n waits for alive signals from the software application processes. As long as these signals are received, it will update the hardware watchdog. If the si ...locally about the watchdog reset. It will appear in the AlphaCom exchange as if the station was powered down and powered back up.2 KB (311 words) - 14:44, 1 November 2016
- ...ed version of our Turbine Kit range. It offers the same high quality audio as the [[TKIS-2]] Kit, but adds to the feature list with an extra RJ45 port fo This station is fully supported as from AlphaCom version 11.2.3.112 KB (308 words) - 14:50, 29 January 2024
- ...french) version of the language file by right clicking and select '''save as...''' ...e '''=''' to fit your own language. When the document is finished, save it as an ini file.1 KB (212 words) - 12:06, 19 May 2021
- ...french) version of the language file by right clicking and select '''save as...''' ...e '''=''' to fit your own language. When the document is finished, save it as an ini file.1 KB (210 words) - 12:00, 19 May 2021
- ...french) version of the language file by right clicking and select '''Save as'''... ...r the "=" to fit your own language. When the document is finished, save it as an <language>.INI file.1 KB (219 words) - 12:30, 23 August 2019
- If the conversation timeout should apply for outgoing calls as well, add the following events: ...the stations concerned to a [[UDP group]], and then set the [[UDP group]] as Event Owner instead of the 'The station' in the above events.1 KB (188 words) - 11:32, 8 July 2022
- ...Controller. Here is a [[Edge Controller|list showing which devices can act as Edge Controller]].2 KB (303 words) - 09:56, 16 August 2022
- * Returns the station [[Physical number]], as a decimal number.416 bytes (62 words) - 09:46, 4 October 2019
- ...nt kit that comes with APIs, tools and examples. The software is delivered as Windows Installer package. ...service. Configuration from VS-IMT was also added for stations in SIP mode as part of the VS-SDK for Pulse project type.2 KB (285 words) - 15:12, 27 January 2020
- In the AlphaCom the character backslash (\) is used as escape character. ...\xhh || align=center| || || 'hh' is the ASCII character code as 2 hex digits. Note that you must use 2 digits.2 KB (330 words) - 15:13, 25 August 2020
- As an alternative you can scan the network for Zenitel devices using the [[IMT As soon as you know the IP address, you can [[Logging into an IP Station|log into the2 KB (320 words) - 15:57, 7 September 2023
- ...ionConnect', 'OnStationDisconnect'. Stationstate updates are now automatic as part of the AlphaNetClient object. ...ormance to accepted standards on .NET assembly naming conventions, as well as namespace naming conventions. Also better separation of functionality like3 KB (344 words) - 14:05, 13 September 2018
- ...nged for the dial input for [[Absence Messages|absence messages]], as well as the date and time shown in the [[Display Features|display of the station]].1 KB (219 words) - 10:54, 8 September 2017
- ...3G-1P has internal circuitry that will physically activate the call button as if someone has pressed it. This allows for full testing of the stations op *All setup items can be changed as required3 KB (509 words) - 14:24, 7 September 2023