Search results
Create the page "TCIV+ Video Settings" on this wiki! See also the search results found.
- ...g upgraded the [[:Category:Stations#Turbine_stations|Turbine Video Station TCIV-x]] to firmware version 4.11. Audio is working fine. File:Non-working video.png|2 KB (357 words) - 14:18, 25 April 2019
- ...r it can also be used to show the video image from a Turbine Video Station TCIV. Video from the following stations are supported:4 KB (662 words) - 10:13, 17 September 2019
- This guide describes the configuration of [http://avigilon.com/products/video-surveillance/avigilon-control-center/ Avigilon Control Center] 6 (6.8.4.0). === Add TCIV camera and start video===5 KB (739 words) - 08:34, 15 August 2022
- {{AEIS}}[[file:TCIV-2+newZ.png|right|200px|thumb|Turbine video substation<br>(1008315020)]] == Audio and Video Configuration ==2 KB (291 words) - 15:00, 5 February 2024
- {{AEIPS}}[[file:TCIV-3.png|200px|thumb|Turbine video substation<br>(1008115030)|alt=]] This product is replaced by [[TCIV-3+]]2 KB (280 words) - 16:09, 23 June 2023
- {{AEIS}}[[file:TCIV-3+newZ.png|right|200px|thumb|Turbine video substation<br>(1008315030)]] == Audio and Video Configuration ==2 KB (291 words) - 15:01, 5 February 2024
- {{AEIPS}}[[file:1008115050.png|200px|thumb|Turbine video substation<br>(1008115050)|alt=]] This product is replaced by [[TCIV-5+]]2 KB (286 words) - 16:09, 23 June 2023
- {{AEIS}}[[file:TCIV-6+newZ.png|right|200px|thumb|Turbine video substation<br>(1008315060)]] == Audio and Video Configuration ==2 KB (301 words) - 14:25, 7 February 2024
- {{AEIS}}[[file:TCIV-5+newZ.png|right|200px|thumb|Turbine video substation<br>(1008315050)]] == Audio and Video Configuration ==2 KB (302 words) - 15:01, 5 February 2024
- ====Video Intercoms==== *Turbine Video intercom and kit: TCIV+4 KB (603 words) - 16:47, 18 March 2022
- {{AEIPS}}[[file:TCIV2Front.PNG|300px|thumb|Turbine video substation<br>(1008115020)|alt=]] This product is replaced by [[TCIV-2+]]2 KB (281 words) - 16:08, 23 June 2023
- {{AEIPS}}[[file:TCIV6Front.PNG|350px|thumb|Turbine video scrolling station<br>(1008115060)|alt=]] This product is replaced by [[TCIV-6+]]2 KB (294 words) - 16:09, 23 June 2023
- {{AEIS}}[[file:TEIV-4+ Front.png|right|300px|thumb|Turbine Extended IP Video Intercom with RFID card space<br>(1008318240)]] == Audio and Video Configuration ==2 KB (219 words) - 12:36, 28 November 2023
- {{AEIS}}[[file:TEIV-1+ Front.png|right|300px|thumb|Turbine Extended IP Video Intercom with Keypad and Display<br>(1008317110)]] == Audio and Video Configuration ==2 KB (229 words) - 17:21, 22 January 2024
- ...ing for information about the TCIV+ generation go to this article: [[Video Settings]]}} ...reaming over RTSP and video Turbine stations (TCIV-x) additionally support video streaming over RTSP.6 KB (857 words) - 16:14, 27 November 2023
- {{AEIS}}[[file:TMIV-1+.jpg|right|300px|thumb|Turbine Mini Video<br>(1008117010)]] == Audio and Video Configuration ==2 KB (260 words) - 17:20, 24 November 2023
- {{AEIS}}[[file:TKIV+-newZ.png|right|300px|thumb|Turbine Video & VoIP Intercom Module<br>(1008331010)]] The TKIV+ VoIP kit enables you to build your own IP Intercom video station or Help-Point with HD camera.2 KB (336 words) - 14:44, 29 January 2024
- ...ilable for the Turbine stations [[TCIV-5+]], [[TCIS-4]], [[TCIS-5]] and [[TCIV-5]], and let you configure the OLED display in the station. ...D Labels.png|thumb|left|500px|OLED settings for TCIS-4, TCIS-5, TCIV-5 and TCIV-5+]]1 KB (150 words) - 17:09, 24 March 2021
- This article describes some common troubleshooting steps for TCIV and ONVIF. ==="Video Settings" page is not visible in station web and I can't connect to video stream.===8 KB (1,349 words) - 15:44, 30 November 2023
- This guide describes the configuration of [http://www.amag.com/video Symmetry CompleteView] 4.8.0.41. It is assumed that Symmetry CompleteView h === Add TCIV camera===4 KB (552 words) - 08:36, 15 August 2022
- === Add and configure TCIV camera === * Use '''Express''' method for ONVIF WS-discovery of TCIV stations.6 KB (859 words) - 08:34, 15 August 2022
- ...n also be put in SIP-mode and directly register to the Sipelia. Video from TCIV+ stations can be shown during the call when the mode is set to H.264. No fu ==Video from Zenitel Devices==2 KB (302 words) - 15:07, 26 June 2023
- == Accessing the Video Settings page == To access the video settings page, [[Logging into an IP Station|log on to the stations]] web interface.6 KB (892 words) - 11:26, 24 January 2024
- ...ing for information about the TCIV+ generation go to this article: [[Video Settings]]}} ...odify the video settings on the station models [[TCIV-2]], [[TCIV-3]] or [[TCIV-6]], [[Logging into an IP Station|log on to the station]] web interface and10 KB (1,548 words) - 16:14, 27 November 2023
- ...of adding Zenitel devices to Pelco Video Expert. It is assumed that Pelco Video Expert has already been setup and is operational and the user is familiar w ====Video Intercoms====3 KB (416 words) - 09:51, 18 August 2022
- [[File:1408001635.jpg|thumb|250px|IP Desktop Station with Video Display - 1408001635]] ...o configue the '''LCD Video module''' of the IP Desktop Video Station. The Video Module has its own IP address, separate from the audio part of the station.10 KB (1,536 words) - 17:13, 12 November 2020
- ...y, or it can also be used to show the video image from a Vingtor-Stentofon Video Door Station. ...d go to '''Server Mangement''' > '''Server Configuration''' > '''Directory Settings'''. In '''Third Party SIP Terminals''' table enter the number and the name.11 KB (1,664 words) - 17:18, 11 March 2019
- === ONVIF Profile-S support on TCIV === ...le-S can be used to integrate with a variety of VMS and NVR products. Both video and audio 1-way streaming is available.5 KB (714 words) - 13:13, 16 August 2022
- {{P}}[[File:Snom Pulse Video.PNG|thumb|right|500px|Snom IP Phone used in a PULSE system]] ...only, or it can also be used to show the video image from any Stentofon IP Video Door Station or from an external Axis camera.11 KB (1,651 words) - 12:44, 9 June 2022
- * The Turbine Video intercoms TCIV+ (Plus) are compatible both with Pelco VideoXpert '''Professional''' and '' * The previous model "TCIV" was compatible with Pelco VideoXpert '''Professional''' only.4 KB (531 words) - 08:33, 15 August 2022
- ====Video Intercoms==== *Turbine Video intercom and kit: TCIV+3 KB (511 words) - 09:53, 18 August 2022
- ...'. The ITSV can be used for audio only, or it can also be used to show the video image from a Zenitel Door station. ===Network settings===13 KB (2,014 words) - 15:10, 16 March 2023
- ...m version 4.x to version 5.x, a factory default is recommended for all new settings and features to take effect'' ...version 2.x to version 2.10, a factory default is recommended for all new settings and features to take effect'' }}3 KB (499 words) - 09:54, 16 August 2022
- ===Network settings === # Push on the touch screen, and select '''Settings''' > '''About phone''' > '''Network status''' to find the IP address.12 KB (1,807 words) - 12:23, 10 July 2020
- '''Description:''' VSF-Fortitude8 is a firmware for Turbine Video Plus Intercom including the following devices: [[TCIV-2+]], [[TCIV-3+]], [[TCIV-5+]], [[TCIV-6+]] and [[TKIV+]]4 KB (660 words) - 05:04, 8 March 2022
- {{A}}[[File:Snom XE Video.PNG|thumb|right|500px|Snom IP Phone with AlphaCom XE server]] ...only, or they can also be used to show the video image from a Stentofon IP Video Door Station or from an external Axis camera.10 KB (1,486 words) - 12:43, 9 June 2022
- ...aWiki page [[IP Desktop with Video Display - Release Notes|IP Desktop with Video Display - Release Notes]] ...g keep-alives every 25 seconds if have enabled "NAT Keep Alive" under Call Settings.5 KB (708 words) - 05:23, 8 March 2022
- ===Network settings === # Push on the touch screen, and select '''Settings''' > '''Network status''' and make a note of the IP address.12 KB (1,843 words) - 09:44, 1 February 2024
- ===Network settings === # Push on the touch screen, and select '''Settings''' > '''Network status''' and make a note of the IP address.13 KB (2,015 words) - 11:30, 24 October 2023
- '''Description:''' VSF-Fortitude8 is a firmware for Turbine Video Plus Intercom including the following devices: [[TCIV-2+]], [[TCIV-3+]], [[TCIV-5+]], [[TCIV-6+]] and [[TKIV+]]2 KB (331 words) - 05:06, 8 March 2022
- ...ion. In addition it shows a live video stream from the inbuilt camera. The video stream is active as long as the call is active. * '''Confirm the settings'''3 KB (507 words) - 18:06, 11 February 2017
- [[TCIV-2+]], [[TCIV-3+]], [[TCIV-5+]], [[TCIV-6+]], [[TKIV+]], [[TMIV-1+]], [[TEIV-1+]] and [[TEIV-4+]]. ===MTN-4292 Acknowledgement of network settings via apply button===4 KB (551 words) - 14:17, 6 February 2024
- ...audio only, or it can also be used to show the video image from a Zenitel Video Door Station. ===Network settings===15 KB (2,349 words) - 15:28, 6 November 2023
- [[TCIV-2+]], [[TCIV-3+]], [[TCIV-5+]], [[TCIV-6+]], [[TKIV+]] and [[TMIV-1+]] In image settings for video devices, the circle showing PTZ location was not showing. this is now fixed4 KB (537 words) - 10:28, 8 September 2023
- ...audio only, or it can also be used to show the video image from a Zenitel Video Door Station. ===Network settings===15 KB (2,352 words) - 15:28, 6 November 2023
- ...audio only, or it can also be used to show the video image from a Zenitel Video Door Station. ===Network settings===15 KB (2,319 words) - 13:00, 17 August 2023
- [[File:ITSV-2 TCIV.png|thumb|right|450px|ITSV-2 unit in IC-EDGE System]] ===Network settings ===14 KB (2,256 words) - 10:55, 30 June 2022
- ...audio only, or it can also be used to show the video image from a Zenitel Video Door Station. ===Network settings===16 KB (2,396 words) - 13:00, 17 August 2023
- [[File:ITSV-3 TCIV.png|thumb|right|450px|ITSV-3 unit in IC-EDGE System]] ===Network settings ===15 KB (2,356 words) - 14:27, 3 November 2022
- ...'Main Settings''' and set "Station Mode" = '''Use SIP''', and enter the IP Settings. ...Settings (SIP)|Account Settings]]: Select '''SIP Configuration''' > '''SIP Settings''' and enter as a minimum '''Display Name''', '''Directory Number''', '''Se9 KB (1,402 words) - 13:12, 12 January 2024
- [[TCIV-2+]], [[TCIV-3+]], [[TCIV-5+]], [[TCIV-6+]], [[TKIV+]] and [[TMIV-1+]] ONVIF over HTTPS is now supported, this also includes video over HTTPS tunneling.3 KB (391 words) - 15:48, 7 October 2022
- '''Description:''' VSF-Fortitude8 is a firmware for Turbine Video Plus Intercom including the following devices: [[TCIV-2+]], [[TCIV-3+]], [[TCIV-5+]], [[TCIV-6+]] and [[TKIV+]]5 KB (729 words) - 05:05, 8 March 2022
- ==Configuration with UDP/TCP transport protocol and video support== *Click '''''Main Settings''''' from the left menu and select '<nowiki/>'''SIP.''''5 KB (735 words) - 15:07, 6 August 2020
- [[TCIV-2+]], [[TCIV-3+]], [[TCIV-5+]], [[TCIV-6+]], [[TKIV+]], [[TMIV-1+]], [[TEIV-1+]] and [[TEIV-4+]]. ...is case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as5 KB (749 words) - 10:08, 2 May 2024
- This article describes the various settings available through the web interface of Zenitel IP Stations when operating w ====Main Settings====9 KB (1,413 words) - 13:26, 12 January 2024
- [[TCIV-2+]], [[TCIV-3+]], [[TCIV-5+]], [[TCIV-6+]], [[TKIV+]] and [[TMIV-1+]] A new option, No-Reg, has been added for Registration Method in Account Settings which will prevent registration towards a server. Device can operate in pee4 KB (512 words) - 13:47, 24 May 2023
- ====Video Intercoms==== *Turbine Video intercom and kit: TCIV+5 KB (809 words) - 14:25, 26 September 2022
- It also includes how to configure relay for Door Opening and how to set up a Video Intercom (ITSV). === IP settings ===9 KB (1,490 words) - 12:56, 26 February 2024
- '''Description:''' ITSV-1 - IP Video phone <br> ==== MTN-2474 Choice for when the video should start streaming====4 KB (605 words) - 17:00, 29 September 2020
- ...on''', '''IP Substation''', '''IP Dual Display''', '''IP-ARIO''' and '''IP Video Desktop Station'''. <br> ...) can be found in separate document on Zenitel Wiki page [[IP Desktop with Video Display - Release Notes]]}}5 KB (854 words) - 05:24, 8 March 2022
- Video streams from the Vingtor-Stentofon cameras (CP-CAM and TCIV) can be accessed by Mirasys. For licensing of the required 'HTTPIPcapture-d ===TCIV===4 KB (552 words) - 13:59, 19 November 2019
- *ONVIF over HTTPS is now supported, this also includes video over HTTPS tunneling. ==Video Intercoms==40 KB (5,470 words) - 17:18, 27 November 2023
- ...d) you must use Third-Party SIP Device (Advanced), as Basic does not allow video. ==SIP Account settings==4 KB (650 words) - 15:30, 13 March 2018
- ...d) you must use Third-Party SIP Device (Advanced), as Basic does not allow video. ==SIP Account settings==4 KB (650 words) - 16:34, 16 June 2023
- ...ion]] of intercom devices: TCIS-x, TKIS-2, TMIS-x, TFIE-x, TKIE-x, TFIX-x, TCIV-x, ECPIR-3P and Exigo IP speakers. * '''ITSV-1''': Firmware for the new ITSV-1 touch video phone7 KB (1,100 words) - 15:36, 11 March 2019
- ...ion]] of intercom devices: TCIS-x, TKIS-2, TMIS-x, TFIE-x, TKIE-x, TFIX-x, TCIV-x, ECPIR-3P and Exigo IP speakers. * '''ITSV-1''': Firmware for the new ITSV-1 touch video phone7 KB (1,103 words) - 11:56, 5 April 2019
- ...on''', '''IP Substation''', '''IP Dual Display''', '''IP-ARIO''' and '''IP Video Desktop Station'''. <br> ...) can be found in separate document on Zenitel Wiki page [[IP Desktop with Video Display - Release Notes]]}}8 KB (1,185 words) - 09:44, 18 February 2020
- * Display Zenitel device video feed in MOBOTIX HUB on various events like a call request, outgoing call, o * Record audio and video during a conversation.14 KB (2,187 words) - 15:45, 25 May 2023
- * Display Zenitel device video feed in the Milestone XProtect VMS on various events like a call request, o * Record audio and video during a conversation.14 KB (2,203 words) - 15:14, 22 May 2023
- The integration of ICX/AlphaCom with Milestone XProtect software enables video stream routing under control of commands issued by ICX/AlphaCom. The interf ...eue, commands related to the selected station is transmitted, allowing the video on the monitor to follow the queue navigation on the master station.20 KB (2,911 words) - 08:51, 16 August 2022
- '''TCIS-x''', '''TCIV-x''', '''TKIS-2''', '''TMIS-x''', '''TFIE-x''', '''TKIE-x''', '''TFIX-x''', TCIV video intercoms should not be used as the Edge Controller for systems exceeding 46 KB (936 words) - 10:18, 23 June 2022
- * VID-CAM-001-V9– Video Integration Licenses. One needed for each Camera. The Intercom Integration ...d to manage other forms of security, such as access control, intrusion and video monitoring. This enhances operator efficiency by avoiding the need to learn19 KB (2,901 words) - 14:07, 15 February 2022
- The integration of ICX or AlphaCom with Milestone XProtect software enables video stream routing under control of commands issued by the ICX or AlphaCom. The ...eue, commands related to the selected station is transmitted, allowing the video on the monitor to follow the queue navigation on the master station.23 KB (3,435 words) - 08:51, 16 August 2022
- Except where stated, the parameters in all the procedures are the default settings and are supplied for reference only. For all other information such as prov *Configure SIP settings on the Turbine station14 KB (2,029 words) - 23:06, 23 April 2018
- ==I am having issues getting my ITSV-x video phone programmed and registered== ==I can’t get my call button on my TCIS/TCIV to call the ITSV-x?==13 KB (2,186 words) - 15:15, 29 August 2023
- ...release notes are for the ''LCD screen'' in the [[IP Desktop Station with Video Display - 1408001635]]. * Improved compatibility with the TCIV station. Due to an unexpected FIN packet the connection was disconnected wi4 KB (633 words) - 09:41, 30 June 2022
- ...3.x and above. IPv6 protocol is currently not supported on Video stations (TCIV-x) and INCA platforms. ...ode of operation and Network Settings, then scroll down to section '''IPv6 Settings'''. By default, Turbine will be configured to receive IPv6 address dynamica9 KB (1,391 words) - 16:01, 6 March 2020
- *Configure SIP Settings on the Turbine station *Configure Account Settings on the Turbine station18 KB (2,628 words) - 10:19, 24 April 2018
- '''TCIS-x''', '''TCIV-x''', '''TKIS-2''', '''TMIS-x''', '''TFIE-x''', '''TKIE-x''', '''TFIX-x''', TCIV video intercoms should not be used as the Edge Controller for systems exceeding 412 KB (1,908 words) - 12:53, 17 August 2022
- '''TCIS-x''', '''TKIS-2''', '''TCIV-x''', '''TMIS-x''', '''TFIE-x''', '''TKIE-x''', '''TFIX-x''', '''ECPIR-3P'' ===MTN-2533 Not possible to save changes on Video and Advanced video pages with HTTPS===20 KB (3,154 words) - 10:17, 23 June 2022
- *Display Zenitel device video feed in MOBOTIX HUB on various events like a call request, outgoing call, o *Record audio and video during a conversation.21 KB (3,311 words) - 15:46, 25 May 2023
- '''TCIS-x''', '''TCIV-x''', '''TKIS-2''', '''TMIS-x''', '''TFIE-x''', '''TKIE-x''', '''TFIX-x''', TCIV video intercoms should not be used as the Edge Controller for systems exceeding 417 KB (2,721 words) - 10:19, 23 June 2022
- *Display Zenitel device video feed in the Milestone XProtect VMS on various events like a call request, o *Record audio and video during a conversation.22 KB (3,426 words) - 15:09, 25 May 2023
- '''TCIS-x''', '''TKIS-2''', '''TCIV-x''', '''TMIS-x''', '''TFIE-x''', '''TKIE-x''', '''TFIX-x''', '''ECPIR-3P'' ===UNI-190 Authentication for viewing video stream (JPG/MJPG)===18 KB (2,857 words) - 10:17, 23 June 2022
- '''TCIS-x''', '''TCIV-x''', '''TKIS-2''', '''TMIS-x''', '''TFIE-x''', '''TKIE-x''', '''TFIX-x''', TCIV video intercoms should not be used as the Edge Controller for systems exceeding 49 KB (1,339 words) - 16:17, 7 October 2022
- '''TCIS-x''', '''TCIV-x''', '''TKIS-2''', '''TMIS-x''', '''TFIE-x''', '''TKIE-x''', '''TFIX-x''', TCIV video intercoms should not be used as the Edge Controller for systems exceeding 410 KB (1,600 words) - 10:18, 23 June 2022
- '''TCIS-x''', '''TKIS-2''', '''TCIV-x''', '''TMIS-x''', '''TFIE-x''', '''TKIE-x''', '''TFIX-x''', '''ECPIR-3P'' TCIV video intercoms should not be used as the Edge Controller for systems exceeding 412 KB (1,827 words) - 10:18, 23 June 2022
- '''TCIS-x''', '''TKIS-2''', '''TCIV-x''', '''TMIS-x''', '''TFIE-x''', '''TKIE-x''', '''TFIX-x''', '''ECPIR-3P'' ===VSIS-698 Advance network settings enabled in Pulse mode===18 KB (2,716 words) - 10:18, 23 June 2022
- ...aWiki page [[IP Desktop with Video Display - Release Notes|IP Desktop with Video Display - Release Notes]] ...829 IP Desktop Station with Video Display freezes during MJPEG stream from TCIV===15 KB (2,328 words) - 05:21, 8 March 2022
- ...ing Center -> Change adapter settings -> (Alt) Menu bar Advanced: Advanced Settings -> Adapters and Bindings ...ing Center -> Change adapter settings -> (Alt) Menu bar Advanced: Advanced Settings -> Adapters and Bindings34 KB (5,067 words) - 15:15, 6 February 2024
- * Turbine Video TCIV-2/3/5/6 .../Account 1/Advanced Settings' depending on the type and make the following settings:12 KB (1,878 words) - 16:12, 15 August 2022
- *VSFF8-8.1.3.2: TKIV+/TCIV+/TMIV+/TEIV+ *VSFF8-7.5.3.1: TKIV+/TCIV+/TMIV+65 KB (8,739 words) - 10:02, 2 May 2024
- ...for all data communication with the IP stations, such as call control, LED settings and display text to the station, as well as key presses and inputs from the ...ia.org/wiki/Frame_rate Frames per Second]) - is the frequency (rate) in a video stream at which consecutive images (frames) are captured or displayed27 KB (4,019 words) - 16:23, 5 January 2024