Search results

Create the page "VS-Client VS-IMT Configuration" on this wiki! See also the search results found.

Zenitel Client IMT Configuration
...DK for a Pulse-enabled project, Zenitel Client must be configured from the VS-IMT (Intercom Management Tool). The following settings are configurable: See [[VS-IMT VS-SDK for Pulse System Setup]] for further details.

1 KB (165 words) - 14:55, 3 March 2022
VS-SDK for Pulse - Release Notes
...tion to stations in SIP mode as a Local Device service. Configuration from VS-IMT was also added for stations in SIP mode as part of the VS-SDK for Pulse pro ===VSIS-895 VS-SDK software bundle including VS-IMT and VS-Client===

2 KB (285 words) - 15:12, 27 January 2020
IMT - Station Web Interface
...econfigured using the station web interface or if the state of the station configuration is not known, it is strongly advised to do one of the following: ...ent_Tool#Main user interface]] for details). <br>This will collect current configuration from the station and store it in IMT. Note that this must be done one stati

2 KB (330 words) - 15:03, 16 August 2022
Zenitel Client “Parking Management” Edition
...igure Zenitel Client is by using the VS-IMT tool. See [[Zenitel Client IMT Configuration]] for details. [[File:VS-Client AccountSettings.PNG|thumb|left|400px|Account settings in "Parking Managemen

3 KB (409 words) - 15:02, 3 March 2022
IMT - Intercom Management Tool
...tercom devices, '''[[IMT - Discover & Upgrade|software upgrade]]''' and '''configuration'''. * Main application window with Intercom configuration options

2 KB (297 words) - 12:03, 23 June 2023
Backup and Restore (IP Stations)
...the web interface of the station it is possible to backup and restore the configuration data. == Download XML Configuration File ==

2 KB (247 words) - 12:06, 5 October 2023
Milestone XProtect - ICX-AlphaCom/IC-EDGE - Release Notes
This has been done to eliminate configuration. Using the Milestone Log Server requires quite a lot of setup and the loggi Saving the logging locally requires no configuration.<br>

2 KB (325 words) - 10:19, 30 June 2022
Zenitel Client Installer
...m: A [[Pulse_Licensing#VS-Client_Extensions|Zenitel-Client (formerly named VS-Client) Extension license]] (Item no. 1009661101) is required in the [[Pulse Serve [[File:vs-client-pulse-server.PNG|thumb|400px|left|Zenitel-client account in Pulse Server]]

3 KB (345 words) - 11:38, 24 May 2023
VS-IS 4.7.3.2 maintenance release
* '''Better handling of boot environment image upgrade process in VS-IMT'''. : If a specific firmware image mandates upgrading of boot environment then VS-IMT shall automatically enable such upgrade step. It is now also possible to se

2 KB (244 words) - 13:18, 16 August 2022
Zenitel Client
{{Obs|The client was earlier named VS-Client.}} ==Installation and Configuration==

2 KB (213 words) - 14:48, 3 March 2022
Zenitel Client - Release Notes
===OV-26 VS-Client has been rebranded to Zenitel-Client=== === PHIX-245 Move VS-client documentation online ===

6 KB (807 words) - 09:09, 16 August 2022
Play sound at Call Request (VS-Operator)
....3.1 this configuration has become much easier. This article describes the configuration for both the new and the old situation. =Configuration with VS-Operator as from version 1.3.3.1=

8 KB (1,132 words) - 10:55, 29 June 2023
IMT - Exporting and Importing Projects
** configuration scripts ** SNMP configuration file

1 KB (159 words) - 13:30, 16 August 2022
VS-Operator Server not starting
...possible to stop the VS-Operator Server from within the VS-Operator Server Configuration Tool. In this case, use 'Task Manager', select the 'Processes' TAB, find 'V

2 KB (354 words) - 10:39, 29 June 2023
VS-IMT VS-SDK for Pulse System Setup
* Perform basic configuration of stations It also supports a configuration specific to VS-SDK for Pulse intercom applications.

9 KB (1,460 words) - 11:36, 29 June 2023
VS-OPC UA for AlphaCom - Release Notes
2) Updating the AlphaOPCConfigurator configuration utility for configuration of the remote connection.

4 KB (528 words) - 14:02, 22 March 2024
Upgrade from Pulse to IC-EDGE
*[[IMT - Discover & Upgrade|VS-IMT]] can be used for station discovery and upgrade, but should not be used to *Upgrade procedure using the VS-IMT tool can be found [[IMT - Discover & Upgrade|here]]. <br>

2 KB (303 words) - 09:56, 16 August 2022
VS-Operator SQL Server on a remote computer
Open SQL Server Configuration Manager * Open the tree 'SQL Server Network Configuration'

3 KB (389 words) - 10:39, 29 June 2023
VSIS-4.11 Release
* VS-IMT ver. 1.4.3.5 - [[IMT - Intercom Management Tool|Intercom Management tool]] * VS-Client ver. 1.3.3.2 - [[VS-Client|Soft Client]] for PULSE systems

5 KB (714 words) - 13:13, 16 August 2022
IMT - Troubleshooting & Technical Background
This article provides some troubleshooting tips in case problems with the VS-IMT is encountered. ...it's possible to manually select network interface which will be used for configuration.

7 KB (1,049 words) - 12:22, 21 March 2023
VS-OPC Classic for AlphaCom - Release Notes
2) Updating the AlphaOPCConfigurator configuration utility for configuration of the remote connection. Configuration file is now stored in _defaultConfigFile = Environment.GetFolderPath(Enviro

6 KB (969 words) - 14:04, 22 March 2024
AlphaNetServiceProvider
...viceProviderAppl is a Windows GUI application. The application is used for configuration and test of the AlphaNetService provider The AlphaNetServiceProvider Application is mainly a configuration and test tool added to the SDK for easy deployment of the AlphaNetServicePr

6 KB (902 words) - 09:29, 19 August 2022
LED control (VS-Operator)
...w to configure the "LEDs" in the Button Matrix in [[VS-Operator]]. By this configuration the LED behavior will be flashing Red at Call Request, and steady green dur Configuration is required in the VS-Operator Client only. No configuration is required in AlphaCom.

5 KB (668 words) - 10:54, 29 June 2023
Software Upgrade (Edge)
* by using the [[IMT|VS-IMT]] tool == Upgrade using the VS-IMT tool ==

3 KB (499 words) - 09:54, 16 August 2022
Pulse Licensing - Generation 1 and 2
* [[VS-Client|VS-Client Extensions]] === VS-Client Extensions ===

6 KB (770 words) - 14:40, 6 July 2022
What's new
* '''VS-IMT''': Updated [[IMT|Intercom Management Tool]] PC application. * '''VS-Client''': Updated [[VS-Client|VS-Client]]

7 KB (1,100 words) - 15:36, 11 March 2019
Maintenance Check Space Error in VS-Operator
...in the message '''Maintenance Check Space Error''' being displayed in the configuration screen. The error will also be shown in operational mode, if a '''Journal P

1 KB (191 words) - 10:38, 29 June 2023
VSIS-4.7 Release
* '''VS-IMT''': Updated [[IMT|Intercom Management Tool]] PC application. * '''VS-Client''': Updated [[VS-Client|VS-Client]]

7 KB (1,103 words) - 11:56, 5 April 2019
Click on IP Camera icon to view video (VS-Operator)
In '''Configuration''' mode, select '''Layout Definitions''', and define a "Tile View pane", wh In '''Configuration''' mode, select '''Script sets''' > '''Add''' > '''IP Camera'''. Create two

4 KB (574 words) - 10:54, 29 June 2023
Pulse Licensing
|1 x VS-Client Extension||1009661101||License for one [[VS-Client|VS-Client]] (PC Client) |6 x VS-Client Extensions||1009661106||License for 6 pcs of [[VS-Client|VS-Clients]]

5 KB (796 words) - 16:30, 8 February 2023
Upgrading Turbine Devices running firmware between 3.0.x.x and 4.2.x.x
...device, the bootloader must be updated as a separate step. If you use the VS-IMT tool for upgrading, the upgrade is a one-step process. The IMT will automat === Upgrade using VS-IMT ===

6 KB (942 words) - 15:51, 15 February 2024
Permanent Audio Stream
The configuration web page for '''Permanent Audio''' is hidden: <ipaddress>/goform/zForm_stre [[File:PermanentAudio.png|thumb|500px|left|Permanent Audio configuration page]]

840 bytes (126 words) - 15:50, 25 November 2020
Station auto-discovery and Configuration (Pulse)
=Station Discovery and Basic configuration= ...ns. Stations are automatically discovered and by using server's StationWeb configuration pages it is very easy to set up a working Pulse system.

4 KB (594 words) - 17:21, 7 March 2019
Recorder 2.0
...th additional support for video recording. The software is flexible in its configuration and only required features need to be licensed.

436 bytes (58 words) - 14:18, 29 June 2022
Quotes in a command string (VS-Operator)
[[Category: VS-Operator - Configuration examples]]

338 bytes (55 words) - 10:50, 24 October 2023
VS-SDK for AlphaCom - Release Notes
*Check whether the required XML-configuration file is in place; if not it autogenerates the file

4 KB (528 words) - 08:44, 30 July 2020
RCO control (VS-Operator)
[[Category: VS-Operator - Configuration examples]]

4 KB (609 words) - 10:55, 29 June 2023
IMT - Discover & Upgrade
...re message. If this is the case, the station must be updated using the "'''Configuration Manager'''".

5 KB (767 words) - 11:09, 8 September 2023
TCIV-6+
== Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]

2 KB (301 words) - 14:25, 7 February 2024
TCIV-5+
== Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]

2 KB (302 words) - 15:01, 5 February 2024
TCIV-2+
== Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]

2 KB (291 words) - 15:00, 5 February 2024
TCIV-3+
== Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]

2 KB (291 words) - 15:01, 5 February 2024
Gallagher
This article is to describe the configuration of the Zenitel device to work with the Gallagher solution. ==Configuration==

2 KB (275 words) - 00:57, 3 February 2023
Turbine 6.2 - Release notes
{{Note|Both Multisite Trunking and VS-Client are free of charge in IC-EDGE}} ....11+ to 4.9 a factory reset is necessary if user wants to use default SNMP configuration. For custom snmp.conf file, re-upload with a custom snmp.conf file will fix

6 KB (936 words) - 10:18, 23 June 2022
SQL Database Backup and Restore
Save configuration data and start service. [[category:VS-Operator - Configuration]]

2 KB (295 words) - 10:49, 7 February 2023
Pop-up with video (VS-Operator)
[[Category: VS-Operator - Configuration examples]]

679 bytes (112 words) - 10:50, 24 October 2023
Pulse System Configuration
# Select '''Server Management''' > '''Server Configuration''' > '''Directory Settings'''. You should now see a list of all stations on See [[IP Station Configuration - Pulse mode]]

16 KB (2,446 words) - 14:15, 3 March 2022
Station Profiles (Pulse)
...sed from Vingtor-Stentofon stations, including Turbine and INCA family and VS-Client. 3rd party SIP stations and ITSV-1 can't send 5 to override busy stations [[Category: Pulse - Configuration]]

1 KB (216 words) - 17:22, 7 March 2019
Turbine 5.0 - Release notes
{{Note|Both Multisite Trunking and VS-Client are free of charge in IC-EDGE}} '''Web-based Configuration and Management Tool'''

12 KB (1,827 words) - 10:18, 23 June 2022
AMC Flash Image Update XE
...ll current configurations and settings, including the licenses. Only basic configuration like IP Setting are kept during the upgrade. During the upgrade process the configuration file "amc_ip_config.xml" is temporarily stored in NVRAM, and is restored af

9 KB (1,311 words) - 13:50, 18 April 2024
Habtech - ICX-AlphaCom integration
==ICX-AlphaCom Configuration==

2 KB (328 words) - 14:18, 12 February 2024
OPC Classic for AlphaCom - Installation
==Configuration== *Start the OPC Server Configuration Tool by selecting Start -> All programs -> Vingtor Stentofon -> AlphaCom OP

20 KB (3,196 words) - 11:00, 24 October 2023
Milestone XProtect - IC-Edge Integration
== Configuration == ====Basic plugin configuration====

7 KB (1,109 words) - 14:13, 22 March 2024
Aritech
== Configuration == === Configuration of Zenitel IP speakers ===

3 KB (398 words) - 12:48, 19 October 2023
Milestone XProtect – AddToLogServer Service
The configuration file AddToLogServerService.exe.config must contain the logon credentials fo ...le the service expects this and will try to decrypt the credentials in the configuration file.

9 KB (1,270 words) - 10:20, 7 April 2022
Address Book
*In SIP mode, select '''SIP Configuration''' > '''Address Book''' or *In Edge mode, select '''Edge Configuration''' > '''Address Book'''

4 KB (661 words) - 17:10, 24 March 2021
INCA 2.7 - Release Notes
...up to 30 ringlist entries and add a timeout using special option. Example configuration for ringing timer of 20 seconds: 100;ringing_time=20 ...d Advanced network settings (802.1x, SNMP, Firewall) on the StationWeb and VS-IMT, for IP stations in Pulse mode.

9 KB (1,353 words) - 05:22, 8 March 2022
Pulse System Description
*VS-IMT: Dedicate management tool for easy configuration of large number of stations ...the Gateways parameter will be available under Server Management -> Server Configuration -> Directory Settings. For every gateway a separate SIP Gateway account nee

12 KB (1,790 words) - 09:57, 18 August 2023
Redundancy
An example Power Supply configuration with optional TKIS-2 to provide Power Supply and ICX-500 monitoring:

2 KB (333 words) - 15:22, 28 June 2022
VSIS version 7 - compatibility and upgrade
#New 'AEC mode' configuration ...r upgrade to 7.1 - this is a new setting which is available in the station configuration pages

6 KB (1,003 words) - 15:07, 25 October 2023
OPC UA for AlphaCom - Installation
*Configuration of the OPC UA Server, Local Discovery Server and test clients. *The stores are defined in the application UA configuration and can be changed if necessary.

31 KB (4,702 words) - 13:53, 22 March 2024
Logging (VS-Operator)
If there is a need to log Door Opening, some additional configuration is required in the ICX-AlphaCom. One have to add a "custom parameter" comma [[Category: VS-Operator - Configuration examples]]

5 KB (796 words) - 13:43, 8 November 2023
IEEE 802.1X
The 802.1X configuration is done from the IP-station web interface at '''Advanced Network''' > '''80 [[Image:802.1X 1.PNG|thumb|500px|left|IEEE 802.1X configuration page]]

12 KB (1,742 words) - 10:36, 7 November 2023
Turbine 7.1 - Release notes
{{Note|Both Multisite Trunking and VS-Client are free of charge in IC-EDGE}} ===OV-12 The audio configuration has been updated===

9 KB (1,339 words) - 16:17, 7 October 2022
INCA 2.10 - Release Notes
'''Web-based Configuration and Management Tool''' IC-EDGE uses a web-based configuration and management tool without the need to install special programs on your PC

8 KB (1,185 words) - 09:44, 18 February 2020
Prison Applications using VS-Operator
...s of tamper alarm from [[Tamper_switch|Vandal Station (TKIE) (I/O3)]] or [[Configuration of the VR3G-1 and VR3G-1P|VR3G (I/O4)]]. <br> [[Category: VS-Operator - Configuration examples]]

10 KB (1,666 words) - 10:50, 24 October 2023
Monitoring redundancy in VS Operator
===VS-Operator configuration=== ===VS Operator Configuration===

10 KB (1,610 words) - 15:55, 8 November 2023
Audio Messaging (SIP)
...message files are uploaded from the station webinterface or from the [[IMT|VS-IMT tool]]. * Select '''Station Configuration''' > '''Audio Messages'''.

13 KB (2,116 words) - 15:25, 6 August 2020
Audio Messaging (Pulse)
...message files are uploaded from the station webinterface or from the [[IMT|VS-IMT tool]]. * Select '''Station Configuration''' > '''Audio Messages'''.

13 KB (2,114 words) - 10:44, 24 November 2021
IMT - Release Notes
===MTN-4283 IMT Configuration Wizard problems with bulk configuration when column sorting is in use=== ...the problem that some stations are excluded from bulk configuration in IMT Configuration Wizard when sorted by columns like directory number, IP address etc.

34 KB (5,067 words) - 15:15, 6 February 2024
Audio Messaging (Edge)
...message files are uploaded from the station webinterface or from the [[IMT|VS-IMT tool]]. * Select '''Edge Configuration''' > '''Audio Messages'''.

14 KB (2,234 words) - 12:21, 24 October 2023
CathexisVision - ICX-AlphaCom integration
===Configuration=== For specific configuration of CathexisVision, please read [https://cathexisvideo.com/download/stentofo

2 KB (290 words) - 08:17, 29 September 2022
Milestone XProtect - IC-EDGE plug-in
==IC-EDGE - Configuration== ====Configuration====

12 KB (1,868 words) - 08:48, 16 August 2022
Mobotix Hub - IC-Edge Integration (Zenitel Call Handler)
{{note|This product is discontinued. For configuration of the latest plugin for integration with Milestone Xprotect go to [[Moboti ===ONVIF configuration===

14 KB (2,187 words) - 15:45, 25 May 2023
Milestone Xprotect - IC-Edge Integration (VS-Milestone Plugin)
{{E}}{{note|This version of the integration is discontinued. For configuration of the latest plugin for integration with Milestone Xprotect go to [[Milest ==IC-EDGE - Configuration==

12 KB (1,892 words) - 04:49, 23 January 2024
Turbine 8.1 - Release notes
....11+ to 4.9 a factory reset is necessary if user wants to use default SNMP configuration. For custom snmp.conf file, re-upload with a custom snmp.conf file will fix ...ulse server - this will reboot stations, and (2) after reboot go to Server configuration -> Save + Apply - this will again reboot all stations.

15 KB (2,383 words) - 10:13, 2 May 2024
Milestone Xprotect - IC-Edge Integration (Zenitel Call Handler)
{{note|This product is discontinued. For configuration of the latest plugin for integration with Milestone Xprotect go to [[Milest ===ONVIF configuration===

14 KB (2,203 words) - 15:14, 22 May 2023
Milestone XProtect - Adding ONVIF compliant Zenitel devices
=== Configuration in the Zenitel Devices ===

3 KB (511 words) - 09:53, 18 August 2022
Turbine 6.4 - Release notes
{{Note|Both Multisite Trunking and VS-Client are free of charge in IC-EDGE}} ===MTN-3598 Entering the Group Calls menu in Edge Configuration does no longer crash the device web===

12 KB (1,908 words) - 12:53, 17 August 2022
Downloads
*VS-IMT ver. 2.2.3.0 - [[IMT - Intercom Management Tool|Intercom Management tool]] *VS-Client ver. 1.5.3.0 - [[VS-Client|Soft Client]] for Edge system

65 KB (8,739 words) - 10:02, 2 May 2024
Software House CCURE 9000 - ICX-AlphaCom integration
*Stop all CrossFire services. To do this, start 'Server Configuration' (Run as administrator), which is available under 'Start menu/Tyco'. Click *Once all services have been stopped, exit 'Server Configuration'

25 KB (3,866 words) - 15:28, 27 March 2023
Voice Language Package ASVP - installation
* In the web interface of the ICX-AlphaCom go to '''System Configuration''' > '''Messaging'''

2 KB (228 words) - 15:12, 3 June 2022
Turbine 6.1 - Release notes
{{Note|Both Multisite Trunking and VS-Client are free of charge in IC-EDGE}} ....11+ to 4.9 a factory reset is necessary if user wants to use default SNMP configuration. For custom snmp.conf file, re-upload with a custom snmp.conf file will fix

17 KB (2,721 words) - 10:19, 23 June 2022
Turbine 7.2 - Release notes
...ier output for external loudspeaker on the TFIX-V2 and CRM-V2. Min and max configuration range are updated accordingly. ....11+ to 4.9 a factory reset is necessary if user wants to use default SNMP configuration. For custom snmp.conf file, re-upload with a custom snmp.conf file will fix

6 KB (858 words) - 13:40, 21 November 2022
Turbine 5.1 - Release notes
{{Note|Both Multisite Trunking and VS-Client are free of charge in IC-EDGE}} ...rt of the Edge system and it can be added to all Zenitel Edge System using configuration tool on Edge Controller web page. Zenitel mobile will have SIP account on t

10 KB (1,600 words) - 10:18, 23 June 2022
Genetec Security Center - Adding ONVIF compliant Zenitel devices
=== Configuration in the Zenitel Devices === Additional ONVIF configuration is available from the [[ONVIF_Settings#Video_Intercoms|Web Interface]] of t

4 KB (603 words) - 16:47, 18 March 2022
Group Call (Pulse)
== Configuration of group calls == [[File:PulseGrp.png|thumb|left|600px|Group call configuration]]

13 KB (2,064 words) - 15:57, 12 September 2019
SIP Intercom - Web Interface
...the dedicated [[IMT|Intercom Management Tool IMT]]. This article describes configuration using the Web interface. #[[Account Settings (SIP)|Account Settings]]: Select '''SIP Configuration''' > '''SIP Settings''' and enter as a minimum '''Display Name''', '''Direc

9 KB (1,402 words) - 13:12, 12 January 2024
VSF-Fortitude6 6.4 Release Notes
===MTN-3598 Entering the Group Calls menu in Edge Configuration does no longer crash the device web=== Entering the Group Calls menu on some devices in Edge Configuration, crashed the device web. This issue is now fixed.

7 KB (1,030 words) - 12:51, 17 August 2022
Pelco VideoXpert - Adding ONVIF compliant Zenitel devices
=== Configuration in the Zenitel Devices ===

3 KB (416 words) - 09:51, 18 August 2022
Genetec Security Center - IC-EDGE/ICX-AlphaCom plugin
Launch the plugin configuration either in the last screen of the installation wizard or via menu or desktop ...ity Center - IC-EDGE/ICX-AlphaCom plugin#IC-EDGE_-_Configuration|IC-EDGE - Configuration]] depending on the Zenitel system to integrate to.

24 KB (3,826 words) - 15:45, 22 November 2023
Mobotix Hub - ICX-Alphacom Integration (Zenitel Call Handler)
{{note|This product is discontinued. For configuration of the latest plugin for integration with Milestone Xprotect go to [[Moboti ===ONVIF configuration===

21 KB (3,311 words) - 15:46, 25 May 2023
Avigilon Control Center - Adding ONVIF compliant Zenitel devices
=== Configuration in the Zenitel Devices ===

5 KB (809 words) - 14:25, 26 September 2022
Milestone Xprotect - ICX-Alphacom Integration (Zenitel Call Handler)
{{note|This product is discontinued. For configuration of the latest plugin for integration with Milestone Xprotect go to [[Milest ===ONVIF configuration===

22 KB (3,426 words) - 15:09, 25 May 2023
OPC Server - Release Notes
...Compatible", and good programming practices, the location of the OPCServer configuration file needed to be moved from '''Program Data Folder''' to '''Application Da ...the old config files needs to copied manually to its new location, or the configuration needs to be re-done with the new AlphaComOPCConfigurator tool (v 2.1.3.0).<

9 KB (1,211 words) - 11:42, 9 February 2023
Turbine 7.3 - Release notes
...n option "standard", target our standard digital level -23 dBFS. While the configuration option "VeryHigh" target -5.5 dBFS (the old default). ....11+ to 4.9 a factory reset is necessary if user wants to use default SNMP configuration. For custom snmp.conf file, re-upload with a custom snmp.conf file will fix

6 KB (1,015 words) - 14:14, 1 February 2023
Turbine 4.2 - Release notes
===MTN-1039 Vs-Client registration deleted after new station is saved to server=== ===MTN-1057 No support for g729 when Turbine configured in VS-IMT VS-SDK enabled project (ZAP)===

18 KB (2,857 words) - 10:17, 23 June 2022
FAQ (IC-Edge)
==How do I activate “Advanced Configuration Mode”?== [[Advanced Configuration Mode (Edge)]]

13 KB (2,186 words) - 15:15, 29 August 2023
Turbine 8.0 - Release notes
...s redirected to a new page with an Apply button to confirm the new network configuration. ...affected Zenitel IMT: In combination with version 8.0.3.1, the Zenitel IMT configuration wizard would get stuck when changing network settings and saving. This is n

8 KB (1,291 words) - 14:34, 6 February 2024
VS-Operator - Release Notes
The transfer of configuration data between server and client has been rewritten, data is sent in smaller ...ssible to move the TABs by drag/drop, within the same panel. This works in configuration mode only.

17 KB (2,737 words) - 11:58, 7 February 2023

Special

Search results