Actions

Difference between revisions of "Exchange & System (AlphaPro)"

From Zenitel Wiki

(→‎Serial Ports)
(→‎General and Advanced Settings)
 
(844 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
{{stub}}
+
{{A}}
−
[[Image:AlphaPro Exchange and System icon.png|800px|thumb|The Exchange & System button]]
+
{| align="right"
−
=Exchange and System=
+
| __TOC__
−
The '''Exchange & System''' window shows information about the exchange and the PC settings. The information can be edited from the System window or by double clicking the exchange in the listbox to the left.
 
−
[[Image:AlphaPro Exchange and System.jpg|thumb|400px|The Exchange & System window]]
 
−
{|border="1"
 
−
! align=left valign=top|Exchange name:
 
−
| The name was choosen when the database was created. Can be edited from the System window.
 
−
|-
 
−
! align=left valign=top|Description:
 
−
| Here you can enter a more detailed exchange name (the text is stored in this PC, and is not sent to the exchange). Can be edited from the System window.
 
−
|-
 
−
! align=left valign=top|Node:
 
−
| Default node number is 1. The node number is for communication between exchanges in [[AlphaNet]]. The node number was choosen when the exchange was created. Can be edited from the System window.
 
−
|-
 
−
! align=left valign=top|AlphaNet - Adm. here:
 
−
| Enabled: The exchange was created with full database. Disabled: The exchange was created without database. The flag can be edited from the System window (as from version 10.40).
 
−
|-
 
−
! align=left valign=top|Cluster Node:
 
−
| [[AlphaNet#Cluster_node_programming|Cluster programming]] is a option to simplify programming and updating of numbers in [[AlphaNet]] when operating with integrated number series. Nodes with the same Cluster Node Number (1-255) are members of the same cluster.
 
−
|-
 
−
! align=left valign=top|Database Version:
 
−
| Shows the database version for the FoxPro database used by the AlphaPro program. The information is automatically entered.
 
−
|-
 
−
! align=left valign=top|Node Type:
 
−
| Reflects the choice you made when you created the exchange. It is possible to change node type in the System window.
 
−
|-
 
−
! align=left valign=top|Language:
 
−
| Reflects the language choosen when the exchange database was created. This choice influences the display texts in the stations.
 
−
|-
 
−
! align=left valign=top|DMP File Id:
 
−
| The name of the dmp file is DMP_x.DMP, where x is the DMP File Id.
 
−
|-
 
−
! align=left valign=top|PC Settings:
 
−
| Shows information on how the PC connects to the exchange
 
−
|-
 
−
! align=left valign=top|1st/2nd/3rd Slave IP:
 
−
| Shows the IP address of the slave module(s) when [[MultiModule]] is used. If the Node Type is set to AlphaCom (and not AlphaCom E) it will change slightly, and instead show which modules are enabled.
 
−
|-
 
−
! align=left valign=top|Comments field:
 
−
| Any additional information is shown here. Note that this information is not sent to the exchange, but is only stored in the PC. Can be edited from the System window.
 
−
|-
 
 
|}
 
|}
 +
From the '''Exchange & System''' window you can inspect and modify a large number of system parameters. <br><br>
 +
==Exchange and System - Main window==
 +
[[Image:AP Exch main.png|thumb|500px|The Exchange & System window|none]]
 +
 +
* '''Exchange name''': The name was choosen when the database was created. Can be edited from the "System" window.
 +
 +
* '''Description''': Additional description may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only. Can be edited from the "System" window.
 +
 +
* '''Node''': 1 - 254. Default node number is 1. The node number is used for communication between AlphaCom servers in [[AlphaNet]]. The node number was choosen when the database was created. Can be modified from the "System" window.
 +
 +
* '''Exchange Database''' (In earlier AlphaPro versions: "AlphaNet - Adm. here"):
 +
** ''Enabled'': The exchange was created with full database.
 +
** ''Disabled'': The exchange was created without database. Used if there is a need to create routing to a remote AlphaCom server without having full database in this AlphaPro.
 +
 +
* '''Cluster Node''': [[AlphaNet#Cluster_node_programming|Cluster programming]] is an option to simplify programming and updating of numbers in [[AlphaNet]] when operating with integrated number series. Nodes with the same Cluster Node Number (1-255) are members of the same cluster.
 +
 +
* '''Database Version''': The FoxPro database version used by the AlphaPro program. The information is automatically entered.
 +
 +
* '''Node Type''': Reflects the choice you made when you created the exchange. It is possible to change node type in the "System" window.
 +
 +
* '''Language''': Reflects the language choosen for display texts in stations when the database was created. Once the database is created, the langauge cannot be changed from AlphaPro.
 +
 +
* '''DMP File Id''': The name of the dmp file is DMP_x.DMP, where x is the DMP File Id.
 +
 +
* '''AlphaCom IP Address''': Shows which IP Address the AlphaPro program will try to connect to when [[Communicate (alphaPro)|establishing communication]] with the AlphaCom server
 +
 +
* '''MultiModule 1st/2nd/3rd Slave IP''': Shows the IP address of the slave module(s) when [[MultiModule]] is used. If the Node Type is set to AlphaCom (and not AlphaCom XE) it will change slightly, and instead show which modules are enabled.
 +
 +
* '''Comments field''': Additional comments may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only. Can be edited from the "System" window.
 +
 
<br><br>
 
<br><br>
 +
 
== System ==
 
== System ==
 
=== General===
 
=== General===
−
[[Image:AlphaPro System.jpg|thumb|400px|The Exchange & System > System > General window]]
+
[[Image:AP Exch Genral.png|thumb|500px|The Exchange & System > System > General window|none]]
−
{|border="1"
+
<br>
−
! align=left valign=top|Exchange name:
+
* '''Exchange name''': The name was choosen when the database was created. Can be edited from the "System" window.
−
| The name was choosen when the database was created. The name will be sent and stored in the AlphaCom exchange. The name can be edited from this window.
+
 
−
|-
+
* '''Description''': Additional description may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only. Can be edited from the "System" window.  
−
! align=left valign=top|Description:  
+
 
−
| Here you can enter a more detailed exchange name (the text is stored in this PC only, it is not sent to the exchange).
+
* '''Node''': 1 - 254. Default node number is 1. The node number is used for communication between AlphaCom servers in [[AlphaNet]]. The node number was choosen when the database was created. Can be modified from the "System" window.
−
|-
+
 
−
! align=left valign=top|Node:
+
* '''Cluster Node''': [[AlphaNet#Cluster_node_programming|Cluster programming]] is an option to simplify programming and updating of numbers in [[AlphaNet]] when operating with integrated number series. Nodes with the same Cluster Node Number (1-255) are members of the same cluster.
−
| Default node number is 1. The node number is for communication between exchanges in [[AlphaNet]]. The node number was choosen when the exchange was created. Can be edited from this window.
+
 
−
|-
+
* '''Node Type''': Reflects the choice you made when you created the exchange. It is possible to change node type in the "System" window.
−
! align=left valign=top|Cluster Node:
+
 
−
| [[AlphaNet#Cluster_node_programming|Cluster programming]] is a option to simplify programming and updating of numbers in [[AlphaNet]] when operating with integrated number series. Nodes with the same Cluster Node Number (1-255) are members of the same cluster.
+
* '''Exchange Database''' (In earlier AlphaPro versions: "AlphaNet - Adm. here"):
−
|-
+
** ''Enabled'': The exchange was created with full database.  
−
! align=left valign=top|Node Type:
+
** ''Disabled'': The exchange was created without database. Used if there is a need to create routing to a remote AlphaCom server without having full database in this AlphaPro. The remote AlphaCom must then be configured from a different AlphaPro PC.
−
| Reflects the choice you made when you created the exchange. It is possible to change the node type from AlphaCom to AlphaCom E or vice versa after the database has been created.
+
 
−
|-
+
* '''Language''': Reflects the language choosen for display texts in stations when the database was created. Once the database is created, the langauge cannot be changed from AlphaPro.  
−
! align=left valign=top|AlphaNet - Adm. here:
+
 
−
| Enabled: The exchange was created with full database. Disabled: The exchange was created without database. The flag can be edited from the System window (as from version 10.40).
+
* '''DMP File Id''': The name of the dmp file is DMP_x.DMP, where x is the DMP File Id.
−
|-
+
 
−
! align=left valign=top|Language:
+
* '''Database Version''': The FoxPro database version used by the AlphaPro program. The information is automatically entered.
−
| Reflects the language choosen when the exchange database was created. This choice influences the display texts in the stations.
+
 
−
|-
+
* '''AlphaCom IP Addresses''':  
−
! align=left valign=top|DMP File Id:
+
**''Connect to'': Specifies which IP address the AlphaPro PC should connected to when establishing communication with the AlphaCom
−
| The name of the dmp file is DMP_x.DMP, where x is the DMP File Id. The information is automatically entered.
+
**''Eth0'': The IP address of ethernet port 0 of the AlphaCom (Default 169.254.1.5)
−
|-
+
**''Eth1'': The IP address of ethernet port 1 of the AlphaCom (Default 0.0.0.0)
−
! align=left valign=top|Database Version:
+
**''AlphaNet'': Enable this flag if the ethernet port is used for [[AlphaNet]] communication. When enabled the ethernet port will show up as a choice in the [[Exchange_%26_System_%28AlphaPro%29#NetRouting|NetRouting window]].
−
| Shows the database version for the FoxPro database used by the AlphaPro program. The information is automatically entered.
+
{{note|The AlphaCom IP addresses are configured from [[AlphaWeb#Interfaces|AlphaWeb]], not from AlphaPro. }}
−
|-
+
 
−
! align=left valign=top|PC Settings/TCP-IP Configuration:
+
* '''Username''': The username needed to log in to the AlphaCom (Default '''admin''')
−
| ''Use TCP/IP to connect'': Select if communication between PC and AlphaCom should be on ethernet or via Com-port<br>
+
 
−
''Connect to port'': Specifies which of the two ethernet ports of the AlphaCom the PC is connected to <br>
+
* '''Password''': The password needed to login to the AlphaCom (Default '''alphaadmin''')
−
''Eth0'': Specify the IP address of ethernet port 0 of the AlphaCom (Default 169.254.1.5)<br>
+
 
−
''Eth1'': Specify the IP address of ethernet port 1 of the AlphaCom (Default 0.0.0.0)<br>
+
* '''Show Password''': Check this box to view and confirm that the correct password is entered.
−
''AlphaNet'': Enable this flag if the ethernet port is used for [[AlphaNet]] communication. When enabled the ethernet port will show up as a choice in the [[Exchange_%26_System_%28AlphaPro%29#NetRouting|NetRouting window]].
+
{{note|If no username and password is written here, AlphaPro will ask for credentials each time communication is established with the AlphaCom}}
−
|-
+
 
−
! align=left valign=top|1st/2nd/3rd Slave IP:
+
* '''MultiModule 1st/2nd/3rd Slave IP''': Configure the IP address of the slave module(s) when [[MultiModule]] is used.  
−
| IP address of the slave module(s) when [[MultiModule]] is used. If the Node Type is set to AlphaCom (and not AlphaCom E) this information will change slightly, and you can enable which modules are in use.
+
 
−
|-
+
* '''Comments field''': Additional comments may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only. Can be edited from the "System" window.
−
! align=left valign=top|Comments field:
+
<br><br>
−
| Any additional information might be entered here. Note that this information is not sent to the exchange, but will be stored in the PC only.  
 
−
|-
 
−
|}
 
  
 
=== Calls and Options ===
 
=== Calls and Options ===
−
[[Image:AlphaPro Calls and Options.jpg|thumb|400px|The Exchange & System > System > Calls and Options window]]
+
[[File:AP CallsAndOptions.png|thumb|500px|The Exchange & System > System > Calls and Options window|none]]
−
{|border="1"
+
 
−
|colspan="2" |'''System Options'''
+
 
−
|-valign="top"
+
'''System Options'''
−
| Duplex: Ignore High Frequency||The high frequency evaluation in the duplex algoritm can be switched off by setting this flag. This may be useful in surroundings with high frequeny noise from fans or aircondition, as the high frequecies might influence on the duplex voice switching.
+
* '''Duplex: Ignore High Frequency''': Applicable to analog [[ASLT]] stations only. The high frequency evaluation in the duplex algorithm can be switched off by setting this flag. This may be useful in surroundings with high frequeny noise from fans or aircondition, as the high frequecies might influence on the duplex voice switching.  
−
|-valign="top"
+
* '''Autonom Mode: Copy NVRAM''': Applicable to [[MultiModule]] system only. The configuration of the Master AMC-IP board will be copied in the background to the slave AMC-IP boards. The slave modules will then be able to run in autonomy mode in case of communication failure with the master module. The copy process takes approx. 38 hours.
−
|Autonom Mode: Copy NVRAM||This option must be enabled if you want to run the slave modules in autonomy mode in case of communication break with the master in a [[MultiModule]] system. The configuration of the Master AMC board will be copied in the background to the slave AMC boards.
+
* '''User SWAP Mode'''. The options are:
−
|-valign="top"
+
** ''Swap phys.nos'': After the swap Dir.no A calls Station B, Dir.no B calls Station A
−
|User SWAP Mode||The options are:
+
** ''Copy users, names, dir.nos'': After the swap Dir.no A calls Station B, Dir.no B calls Station A
−
* ''Swap phys.nos'': After the swap Dir.no A calls Station B, Dir.no B calls Station A
+
** ''Copy users, names, NOT dir.nos'': After the swap Dir.no A calls Station A, Dir.no B calls Station B
−
* ''Copy users, names, dir.nos'': After the swap Dir.no A calls Station B, Dir.no B calls Station A
+
* '''Work Channel LED indication''': When using the "Work Channel" option in the [[Multiconference|MultiConference]] feature, you can choose LED indication in the DAK key assigned as the current "Work Channel"
−
* ''Copy users, names, NOT dir.nos'': After the swap Dir.no A calls Station A, Dir.no B calls Station B
+
<br>
−
|-valign="top"
+
'''Flags'''
−
|colspan="2"|'''Flags'''
+
* '''Group Hunt Rotate''': The [[Group hunt]] can be programmed either to:
−
|-valign="top"
+
** ''Enabled'' (default): Rotating order - start on the next [[physical number]] in the group in relation to the previous connection  
−
|Group Hunt Rotate||The [[Group hunt]] can be programmed either to:
+
** ''Disabled'': Fixed start - always start at the lowest free [[physical number]] in the group
−
* rotating - start on the next [[physical number]] in the group in relation to the previous connection (default)
+
* '''Simultaneous Group Calls''':
−
* fixed start - always start at the lowest free [[physical number]] in the group
+
** ''Enabled'' (default): Several [[Groups#Group_Call.2FAnnouncement|group calls]] might be active at the same time if there are no overlapping members. When several group calls are active simultanously, a group call can only be [[Group call answer feature|answered]] from a station belonging to the group. Note that the "gong" is a common resource for all groups and can only be used by one group at the time.
−
|-valign="top"
+
** ''Disabled'': It is not possible to have more than one active group call in the system at a time.
−
|Simultaneous Group Calls||Checked: Several [[Groups#Group_Call.2FAnnouncement|group calls]] might be active at the same time if there are no overlapping members. When several group calls are active simultanously, a group call can only be answered from a station belonging to the group.
+
 
−
Note that the "gong" is a common resource for all groups and can only be used by one group at the time.  
+
* '''No Group Calls In Conversation''':
 +
** ''Enabled'': No group call audio will be played in the station if it is active in a conversation.
 +
** ''Disabled'' (default): Group call audio will be mixed with the conversation audio.
 +
 
 +
* '''Mute Program During Group Call''':
 +
** ''Enabled'': Audio Program will be muted while a group call is being played
 +
** ''Disabled'' (default): Audio Program will be mixed with the group call audio
 +
 
 +
* '''Ignore Station Down In Conversation''': The system is designed such that if a station is reported faulty while in conversation, the conversation will be cancelled.  With this flag enabled, the system will ignore station faulty reports for stations in conversation. This might resolve a problem experienced with some old analog [[ASLT]] substations that automatically cancels the call immediately after the call is connected. This flag is applicable to analog ASLT stations only.
 +
 
 +
* '''Ringing Group in Global mode''':
 +
** ''Enabled'' (default): The activation of a ringing group call is sent as broadcast to all nodes in [[AlphaNet]]. This implies that the same local Ringing Group number is activated in all nodes. See [[Ringing_Group_Feature#AlphaNet_Configuration|Ringing Group Feature in AlphaNet]]
 +
** ''Disabled'': The activation of a ringing group call will ring to the local ringing group in own node only
 +
 
 +
<br>
 +
'''Wake Up Call'''
 +
* '''Duration''': Duration of private ringing for [[Wake-up Calls]]
 +
* '''Repetition''': Number of times the Wake-up Call is repeated if not acknowledged
 +
* '''Interval''': The time between repetitions
 +
 
 +
<br>
 +
'''Hotline'''
 +
* '''Hotline Call Delay''': The time from the handset is lifted till the [[Hotline Call|hotline number]] is dialed. During this time it is possible to use the keypad for ordinary dialing. If all telephones/stations with the hotline option are going to be used for hotline dialing only, set the delay to 0. Default time = 5.0 sec. The Hot-Line feature must be enabled per station in the [[Users_%26_Stations_(AlphaPro)#Station_Type_tab|Users & Stations > Station Type window]].
 +
 
 +
<br>
 +
'''Priority Mail" Queue Indication'''
 +
* '''Minimum Priority Level''': This value is linked to the events [[Priority Mail Present (Event Type)|Priority Mail Present]] and [[Priority Mail in Idle (Event Type)|Priority Mail in Idle]], and sets the minimum priority level required to trigger these events. By default these events are triggered by mails or call requests with priority 100 or higher.
 +
* '''Private ring mail priority''': When receiving [[ Mail]] or [[Call Request]] with this priority or higher, the receiving station will be alerted by a private ringing tone. Default priority level is 150 or higher. Also [[ATLB]] subscribers (telephones) can receive this type of Call Requests, as the telephone will start to ring when a call is received.
 +
 
 +
<br>
 +
'''Call Forwarding'''
 +
* '''Ringing Count''': When [[Transfer Features|Call Forwarding]] is activated on a station, this parameter sets the number of ringing signals to be played in the station before the call is forwarded.  When set to 0 the call will be forwarded immediately, without any ringing signal heard in the station.
 +
 
 +
<br>
 +
'''Urgent Feature Reminder'''
 +
* '''Pulse Count''': The number of "dut-dut-dut-dut" tones when receiving [[Call Request]] (or any other mail) with priority 120 or more. Usually triggered by the [[Send Call Request Feature|call request code 622]]. See also [[Urgent feature reminder]]
 +
* '''Pause Between''': The interval between the [[Urgent feature reminder]] tones
 +
 
 +
<br>
 +
'''Conversation Timeout'''
 +
* '''Enable''': By default converations are cancelled after 1 hour 49 minutes. Uncheck this flag if conversation timeout is not wanted. The timeout is applicable to point to point calls and [[Duplex Conference|Duplex conference]] calls. [[Simplex conference]] or [[Groups|Group Calls]] are not affected by this timer.
 +
* '''Timeout''': The conversation timeout can be modified. Max. time is 6540,0 seconds (1 hour 49 minutes)
 +
 
 +
<br>
 +
'''Call Requests'''
 +
* '''Delete Mail Filter''': If the Delete Mail Filter is set different from "0", all mails or call requests with priority levels ending with this value (e.g. 3, 13, 23, 33, 43, etc.) can not be deleted from the station (i.e. dialing [[Mail Queue Operation|7630]] or [[Stationreset feature|70+0]]), or by the [[DELETE_MAIL|$DELM]] data protocol command. If ''Delete Mail Filter = 10'' then the filter is done on priority levels ending with 0. Mails will be deleted when successfully calling back to the sender, or when using the data command [[CANCEL MAIL|$CANM]]. ''Delete Mail Filter = 0'' means all mails can be deleted.
 +
* '''Cancel Mail on Call Back Threshold''': Mails with priority higher than the set value will not be deleted when calling back. The mail/call request will remain in the queue. Can be used in combination with the Delete Mail Filter to prevent cancellation of call requests on the receiving station. Mails can be deleted by the data command [[CANCEL MAIL|$CANM]].  
  
−
Unchecked: It is not possible to have more than one active group call at a time.
 
−
|-valign="top"
 
−
|No Group Calls In Conversation||When enabled no group call audio will be received when a station is active in a conversation.
 
−
|-valign="top"
 
−
|Mute Program During Group Call||By default [[Audio Program]] and group call audio is mixed. When enabled the Audio Program will be muted when a group call is received.
 
−
|-valign="top"
 
−
|Ignore Station Down In Conversation||If a station is reported faulty while in conversation the conversation will not cancel.  Might resolve a problem experienced with some older substations which cancels the call immediately after connection.
 
−
|-valign="top"
 
−
|colspan="2"|'''Wake Up Call'''
 
−
|-valign="top"
 
−
|Duration||Duration of private ringing for [[Wake-up Calls]]
 
−
|-valign="top"
 
−
|Repetition||Number of times the [[Wake-up Calls|Wake-up Call]] is repeated if not answered
 
−
|-valign="top"
 
−
|Interval||Time between repetitions
 
−
|-valign="top"
 
−
|colspan="2"|'''Hotline'''
 
−
|-valign="top"
 
−
|Hotline Call Delay||The time from the handset is lifted till the [[Hot-line Dialing|hotline number]] is dialed. During this time it is possible to use the keypad for ordinary dialing. If all telephones/stations with the hotline option are going to be used for hotline dialing only, set the delay to 0. Autoload = 5 sec. The Hot-Line feature must be enabled per station in the [[Users_%26_Stations_%28AlphaPro%29#Station_Type|Users & Stations > Station Type window]].
 
−
|-valign="top"
 
−
|colspan="2"|"'''Priority Mail" Queue Indication'''
 
−
|-valign="top"
 
−
|Minimum Priority Level||This value is linked to the events [[Priority Mail Present (Event Type)|Priority Mail Present]] and [[Priority Mail in Idle (Event Type)|Priority Mail in Idle]], and sets the minimum priority level required to trigger these events.
 
−
|-valign="top"
 
−
|Private ring mail priority||When receiving [[ Mail]] or [[Call Request]] with this priority or higher, the receiving station will be alerted by a private ringing tone. Default priority level is 150. Also [[ATLB]] subscribers (telephones) can receive this type of Call Requests, as the telephone will start to ring when a call is received.
 
−
|-valign="top"
 
−
|colspan="2"|'''Call Forwarding'''
 
−
|-valign="top"
 
−
|Ring Count||Number of private ringing signals on the station before the [[Transfer Features|call is transferred]].  When set to 0 the call will be transferred immediately, without any ringing signal heard in the station.
 
−
|-valign="top"
 
−
|colspan="2"|'''Urgent Feature Reminder'''
 
−
|-valign="top"
 
−
|Pulse Count||The number of "dut-dut-dut-dut" tones when receiving [[Call Request]] (or any other mail) with priority 120 or more. Usually triggered by the [[Send Call Request Feature|call request code 622]]. See also [[Urgent feature reminder]]
 
−
|-valign="top"
 
−
|Pause Between||The interval between the [[Urgent feature reminder]] tones
 
−
|-valign="top"
 
−
|colspan="2"|'''Conversation Timeout'''
 
−
|-valign="top"
 
−
|Enable||By default all converations are cancelled after 1 hour 49 minutes. Uncheck this flag if conversation timeout is not wanted
 
−
|-valign="top"
 
−
|Timeout||The conversation timeout can be modified. Max. time is 6540,0 seconds (1 hour 49 minutes)
 
−
|}
 
 
<br><br>
 
<br><br>
  
 
=== Logs and Errors===
 
=== Logs and Errors===
−
[[Image:Logs And Errors.jpg|thumb|400px|The Exchange & System > System > Logs and Errors window]]
+
[[Image:AP LogsAndErrors.png|thumb|500px|The Exchange & System > System > Logs and Errors window|none]]
−
{|border="1"
+
 
−
|colspan="2"|'''System Logging to Printer/PC'''<br>
+
 
−
''Select what to report to the [[System log]]''  
+
'''System Log''' It is possible to filter away certain error reportings to the [[System log]]''  
−
|-valign="top"
+
 
−
|Line Error|| Analog station: Short-circuit or break on audio wires<br>
+
* '''Line Error''': Station errors, both analog [[ASLT]] stations and IP Stations. (Station errors will still be reported via [[Faulty Station Line (Event Type)|Event 13 - Faulty Station Line]], and to Supervisor station defined in "Faulty Line" in [[Exchange_%26_System_(AlphaPro)#Faults|Faults]] menu).
−
IP Station: Communication error between AlphaCom E and IP station
+
* '''Board Error''': Errors on feature boards ([[ASLT]], [[ATLB-12]], [[AGA]], [[ASVP]]) detected by the [[AMC-IP]]
−
|-valign="top"
+
* '''Device/CardCage Error''': Includes the following devices:  
−
|Board Error||Any board error detected by the [[AMC-IP]]
+
** [[RIO]] ([[Device]]s 1 - 64)
−
|-valign="top"
+
** Exchange Modules (device 65-68) in a [[MultiModule]] system
−
|Device/CardCage Error||Includes the following devices:  
+
* '''Software Reports''': Some messages during start-up and normal operation
−
* [[RIO]] ([[Device]]s 1 - 64)
+
* '''RCI ON/OFF''': [[RCI]] inputs located on the AlphaCom server or on a [[RIO|RIO unit]]
−
* Exchange [[Module]]s (device 65-68)  
+
 
−
|-valign="top"
+
 
−
|Software Reports||Various messages during start-up and normal operation, see [[System log]] for more details
+
'''Line Monitoring'''
−
|-valign="top"
+
* '''Extended Wire Check''': Applicable to analog [[ASLT]] stations only. Check for break in c- or d-wire even if ab-wires are OK. When a station is tested the LED will flash for a short period. A break in c/d-wire will be detected within approx. 1.5 to 6 minutes, depending on the number of stations connected to the system. Stations are tested one by one in a rotating fashing. The test uses 0.5 sec per station connected and 0.1 sec per station not connected. After having tested the last station in the loop there is a 23 second delay before the test starts again from the beginning.
−
|RCI ON/OFF||Report when [[RCI]] inputs goes ON or OFF
+
* '''Enable Tone Test''': Activate the periodic [[Line_monitoring#Tone_test|Tone Test]]. [[Start Tone Test (Line Monitoring) feature| The manual tone test]] can be activated independent of periodic tone test.
−
|-valign="top"
+
** '''Start time, Tone Test''': Enter the time (24-hour notation) when the tone test should start
−
|colspan="2"|'''Line Monitoring'''
+
** '''End Time, Tone Test''': Enter the time (24-hour notation) when the tone test should stop. If start and stop time are set to 0, the tone test runs continuously.
−
|-valign="top"
+
 
−
|Extended Wire Check||Check for break in c- or d-wire even if ab-wires are OK. When a station is tested the LED will flash for a short period. A break in c/d-wire will be detected within approx. 1.5 to 6 minutes, depending on the number of stations connected to the system. Stations are tested one by one in a rotating fashing. The test uses 0.5 sec per station connected and 0.1 sec per station not connected. After having tested the last station in the loop there is a 23 second delay before the test starts again from the beginning.
+
* '''OffHook Too Long''': Applicable to all types of stations (analog [[ASLT|ASLT stations]], [[ATLB-12|ATLB phones]] and IP Stations). A station error is reported if the handset is off for more than the time specified here (default 1 hour), and no dialling takes place. OffHook error will also be reported on analog [[ASLT|ASLT stations]] without display electronics if there is a break in the a- or b-wire.
−
|-valign="top"
+
 
−
|Enable Tone Test||Activate the periodic [[Line_monitoring#Tone_test|Tone Test]]. [[Start Tone Test (Line Monitoring) feature| The manual tone test]] can be activated independent of periodic tone test.
+
* '''AlphaNet Audio Test Period''': Interval between tone test of each AlphaNet audio line. Applicable only when AlphaCom servers are interconnected using [[AGA]] or [[AE1]] boards, not when interconnecting servers using IP network. Value 65535 will disable the test. Disabling may be necessary in installations with multiplexes with echo cancellation or heavy voice compression, where the tone test may fail and cause an AlphaNet line error.  
−
|-valign="top"
+
 
−
|Start time, Tone Test||Enter the time (24-hour notation) when the tone test should start
+
 
−
|-valign="top"
+
'''System Log and Error Reports to'''
−
|End Time, Tone Test||Enter the time (24-hour notation) when the tone test should stop. If start and stop time are set to 0, the tone test runs continuously.
+
* '''Node 1:''' and '''Device 1:''': When an AlphaCom server generates an error message, it can be sent to one or two destinations. Enter the [[node]] and [[device]] number to which [[System log]] events should be sent. Default value is 0 + 0, which means report to own log port. Example: 4 + 65 means forward system log events to node 4. Messages forwarded by this programming are [[STATUS_REPORT]] and [[LOG STRING]].
−
|-valign="top"
+
* '''Node 2:''' + '''Device 2:''': Forward System Log reports to remote node and device. Default value is 0 + 0, which means report to own log port. Example: 4 + 65 means forward system log events to node 4.
−
|OffHook Too Long||For [[Line_monitoring#TouchLine_station_without_display|stations without display off-hook]] is not possible to separate from break in ab-wire. A station error is reported if the handset is off for more than the time specified here, and no dialling takes place. Default = 1 hour.
+
* '''Broadcast event messages to remote node''': [[Broadcast messages (ACDP)|ACDP broadcast messages]] will be forwarded to the specified node. Useful for Call Handler applications like [[AlphaVision]] used in [[AlphaNet]], which relies on status information received from each individual AlphaCom exchange.
−
|-valign="top"
+
<br><br>
−
|AlphaNet Audio Test Period||Interval between tone test of each AlphaNet audio line (Relevant for [[AGA]] or [[AE1]] lines only). Value 65535 will disable the test. This may be necessary in installations with multiplexes with echo cancellation or heavy voice compression, where the tone test may fail and cause an AlphaNet line error.  
 
−
|-valign="top"
 
−
|colspan="2"|'''System Log and Error Reports to'''
 
−
|-valign="top"
 
−
|Node 1 + Device 1||When an exchange generates an error message, it can be sent to one or two destinations. Enter the [[node]] and [[device]] number to which [[System log]] events should be sent. Default value is 0 + 0, which means report to own log port. Example: 4 + 65 means forward system log events to node 4.
 
−
|-valign="top"
 
−
|Node 2 + Device 2||Forward System Log reports to remote node and device. Default value is 0 + 0, which means report to own log port. Example: 4 + 65 means forward system log events to node 4.
 
−
|-valign="top"
 
−
|Broadcast event messages to remote node||[[Broadcast messages (ACDP)|ACDP broadcast messages]] will be forwarded to the specified node. Useful for Call Handler applications like [[AlphaVision]] used in [[AlphaNet]], which relies on status information received from each individual AlphaCom exchange.
 
−
|}
 
  
 
=== Timers===
 
=== Timers===
−
[[Image:Timers.jpg|thumb|400px|The Exchange & System > System > Timers window]]
+
[[Image:AP Timers.png|thumb|500px|The Exchange & System > System > Timers window|none]]
  
−
{|border="1"
+
 
−
|Voice paging answer wait time:|| [[Group call answer feature|Answer]] time after a Group Call or All Call. The group call originator can choose not to cancel after the announcement, but wait for somebody to dial the answer code (default 99).
+
* '''Voice paging answer wait time''': [[Group call answer feature|Answer]] time after a Group Call or All Call. The group call originator can choose not to cancel after the announcement, but wait for somebody to dial the answer code (default 99).
−
|-valign="top"
+
* '''Voice Paging Message Wait Time''': Time from a [[Groups|Group Call]] or All Call is made till the M-key must be pressed.
−
|Voice Paging Message Wait Time||Time from a [[Groups|Group Call]] or All Call is made till the M-key must be pressed.
+
* '''Call Request/Busy Notify Display Time''': The time a [[Call Request]] Message or a [[Busy Notify feature|Busy Notify Message]] is displayed at the receiving station.  
−
|-valign="top"
+
{{Note|About the '''Call Request/Busy Notify Display Time''' timer:
−
|Call Request/Busy Notify Display Time|| The time a [[Call Request]] Message or a [[Busy Notify feature|Busy Notify Message]] is displayed at the receiving station.
+
* This timer also determines how long an ongoing conversation will be interrupted (audio cut) by a new Call Request or Busy Notify message.
−
|-valign="top"
+
* If an operator finds it annoying that incoming Call Requests are cutting the audio in an ongoing conversation, this timer can be reduced to a lower value, e.g. "1".
−
|Call Request Reminder Time||The ringing time for a (sub)station which has made a [[Call Request]]
+
*  By setting the timer to "0", notification of new Call Requests is disabled. There will be no audio interruption at all of an ongoing call, but also no display indication that there are new call requests coming in. }}
−
|-valign="top"
+
* '''Call Request Reminder Time''': Sets the timeout for the ringing for stations that have made a [[Call Request]], or initiated a call to a [[Ringing Group Feature|Ringing Group]]
−
|Camp On Busy Time || If a station or a feature is busy you will hear a "busy" tone and the display will show "Busy". If the station or feature becomes free within this preset time limit (default 30 seconds), you are automatically connected (Camp on Busy).
+
{{Note|About the '''Call Request Reminder Time''' timer:
−
|-valign="top"
+
* If the ringing times out after a Call Request, the call will still remain in the call queue of the receiving station(s)
−
|Private Call Time|| Sets the timeout for calls in Private Ringing mode.
+
* If the ringing times out after calling a Ringing Group, the call will be removed from the receiving station(s) }}
−
|-valign="top"
+
* '''Camp On Busy Time''': When calling a busy station or a feature, you can wait (not cancel the call) and get automatically connected if the busy station or feature becomes free within this preset time (default 30 seconds).
−
|Auto Search Time|| A call in private ringing mode will be transfered to the [[search|search]] list of the called station after this time (default 11 seconds) if the [[Users_%26_Stations_%28AlphaPro%29#Automatic_Search|auto-search feature]] is enabled.
+
* '''Private Call Time''': Sets the timeout for the ringing for calls in [[Private mode|Private Ringing]] mode.
−
|-valign="top"
+
* '''Auto Search Time''': A call in private ringing mode will be transferred to the "Search list" of the called station after this time (default 11 seconds). The [[Users_%26_Stations_(AlphaPro)#Automatic_Search_tab|Automatic Search feature]] has to be enabled.
−
|RCO (door open) Pulse Time|| The time the RCO signal is active for the event types [[Door Opening - During Conversation (Event Type)|Door Opening during connection]] and [[Door Opening - Automatick Lock (Event Type)|Automatic lock]].
+
* '''RCO (Door Open) Pulse Time''':  The event types [[Door Opening - During Conversation (Event Type)|Door Opening during connection]] and [[Door Opening - Automatic Lock (Event Type)|Automatic lock]] are using this timer. When these events are triggered, the event is reported ON, and then OFF 3.5 sec (default) later. This is typically used to trigger and RCO/relay to generate a pulse for door opening. The pulse time can then be modified by this timer.
−
|-valign="top"
+
* '''Call Request search string Timeout''': An [[Call_Request_forward_by_search_strings|unattended Call Request]] will be transferred to the "Search list" of the called station after this time (default 20 seconds). The [[Users_%26_Stations_(AlphaPro)#Automatic_Search_tab|Automatic Search feature]] has to be enabled.
−
|Call Request search string Timeout||[[Call_Request_forward_by_search_strings|Forward unattended Call Request]]s to the [[search|search]] list after this time (default 20 seconds) if the [[Users_%26_Stations_%28AlphaPro%29#Automatic_Search|auto-search feature]] is enabled.
+
* '''Auto-Attendant Timeout''': The [[Auto-attendant|Auto-attendant feature]] provides voice guided menus for handling incoming phone calls. If the caller doesn't press any digits when calling in, the call will automatically be re-routed (default) after the voice message has finished playing. This timer sets the timeout before re-routing.
−
|}
+
 
−
<br style="clear: both;" />
+
<br>
  
 
===Fire Alarm===
 
===Fire Alarm===
−
[[Image:Fire Alarm.png|thumb|400px|The Exchange & System > System > Fire Alarm window]]
+
See [[Fire Alarm interface via ESPA444]]
 +
[[Image:AP FireAlarm.png|thumb|500px|The Exchange & System > System > Fire Alarm window|none]]
  
−
{|border="1"
+
 
−
|AlphaCom ESPA 4.4.4 Address||Link address in the [[ESPA 4.4.4|ESPA 4.4.4 protocol]] for communication for AlphaCom. Is used for communication between AlphaCom exchange and the Fire Alarm Control Panel. The value is by default set to 50.  
+
* '''AlphaCom ESPA 4.4.4 Address''': Link address in the [[ESPA 4.4.4|ESPA 4.4.4 protocol]] for communication for AlphaCom. Is used for communication between AlphaCom server and the Fire Alarm Control Panel. The value is by default set to 50.  
−
|-valign="top"
+
* '''Fire Panel 4.4.4 Address''': Link address in the ESPA 4.4.4 protocol for the fire alarm panel. Is used for communication between AlphaCom server and the Fire Alarm Control Panel. The value is by default set to 49.  
−
|Fire Panel 4.4.4 Address||Link address in the ESPA 4.4.4 protocol for the fire alarm panel. Is used for communication between AlphaCom exchange and the Fire Alarm Control Panel. The value is by default set to 49.  
+
* '''Supervisor Station''': The station receiving the pre-alarm message.
−
|-valign="top"
+
* '''Nearest Station''': When a prewarning message is displayed at the supervisor station, pressing 8 at the supervisor station sets up a connection to the station closest to the Fire Alarm Control Panel.
−
|Supervisor Station||The station receiving the pre-alarm message.
+
* '''Pager Driver''': The following options are available:
−
|-valign="top"
+
** Tateco T940SI (Driver 1)
−
|Nearest Station||When a prewarning message is displayed at the supervisor station, pressing 8 at the supervisor station sets up a connection to the station closest to the Fire Alarm Control Panel.
+
** Ericsson PSP800 (Driver 2)
−
|-valign="top"
+
** Stentofon/Multitone RPE 351/651/Mk7 (Driver 3)
−
|Pager Driver||The following options are available:
+
* '''Fire Team (Group Number)''': The group of intercom stations receiving the Fire Pre-Alarm and the Fire Alarm messages.
−
*Tateco T940SI (Driver 1)
+
 
−
*Ericsson PSP800 (Driver 2)
+
<br>
−
*Stentofon/Multitone RPE 351/651/Mk7 (Driver 3)
 
−
|-valign="top"
 
−
|Fire Team (Group Number)||The group receiving the Fire Pre-Alarm and the Fire Alarm messages to their pagers.  
 
−
|}
 
−
<br style="clear:both;" />
 
  
 
===VoIP===
 
===VoIP===
 +
[[Image:AP VoIP.png|thumb|500px|The Exchange & System > System > VoIP window|none]]
  
  
−
[[Image:VolP.jpg|thumb|300px|The Exchange & System > System > VoIP window]]
+
'''Flags'''
 +
* '''Use VolP Audio for MultiModule''': The flag is enabled by default. When enabled, [[MultiModule]] calls will use [[AGA]] or [[AE1]] for audio distribution between the modules if available. If no (free) AGA/AE1 found, VoIP channel will be used. When the flag is disabled, MutliModule calls will only use [[AGA]] or [[AE1]] for audio distribution, VoIP channels will not be used.
 +
* '''Optimized voice duplex control when conversation with SIP trunk/station''': When an analog [[ASLT|ASLT station]] in a noisy environment is calling a SIP phone there can be issues with the automatic voice switching (duplex) due to the echo cancelling in the SIP phone. When this flag is set, the initial voice direction is forced to be from the intercom station towards the SIP phone. When the phone operator starts to speak, the voice direction will switch towards the intercom station, regardless of the level of the audio signal from the intercom station. As soon as the phone operator stops speaking, the voice direction will switch back to the initial direction.
 +
* '''Incoming calls from SIP in Private Ringing mode''': When enabled, incoming SIP trunk calls will be forced in private ringing mode, regardless of the private/open setting of the intercom station.
 +
* '''Use UK style Ringing Tone on Ringing Group Calls from SIP''': When enabled, SIP trunk calls to a [[Ringing Group Feature|Ringing Group]] will be using a dedicated ringing tone. This is to distinguish external phone calls from internal calls.
 +
* '''Use UK style Ringing Tone on Private Calls from SIP''': When enabled, SIP trunk calls to a station in [[Private mode]] will be using a dedicated ringing tone. This is to distinguish external phone calls from internal calls.
 +
** For the two options above, one can choose between different tone types:
 +
*** 500 Hz Tone
 +
*** 400 Hz Tone (Default)
 +
*** Private Ring Tone
 +
*** Attention Tone (muted)
 +
*** Attention Tone
 +
*** Busy Tone (muted)
 +
*** Busy Tone
 +
*** Dial Tone
 +
: When disabled, regular Private Ringing tone will be used.
 +
* '''Allow SIP Stations in Group Calls and as default speaker in SX Conference''': (AlphaCom 12.3.3.1 or later) When the flag is enabled, SIP users can be included in "group" operations:
 +
** Include SIP Stations or SIP Trunk Stations in group calls. The SIP phone must have AutoAnswer enabled. The system will wait for 3 seconds for a "SIP OK" response from the SIP phone. If no such response, the group call will carry on anyway. Maximum SIP users in a group call: 200 SIP users in ICX system, 50 SIP users in an AlphaCom system.
 +
** A SIP user can be configured as a [[Simplex Conferences (AlphaPro)|Default Speaker in a Simplex Conference]]. The SIP user must have AutoAnswer enabled. Use case: The SIP user is a conference circuit in a remote iPBX, in this way one can combine the conference of the iPBX with the simplex conference of the AlphaCom.
 +
** SIP Stations (max 50) may receive Voice Alarm Messages. That is messages triggered by e.g. [[Remote setup of Alarm message feature|761 code]], [[$GM]], [[AMG]], [[AMS - Alarm Message to Station|AMS]] or [[$ALRM]]
 +
** Make sure the Codec in the Group or Simplex Conference settings match the codec used by the SIP phone, or it might giver error code 488 Not Acceptable Here in the SIP trace.
  
−
{|border="1"
+
'''Timers'''
−
|colspan="2"|'''Flags'''
+
* '''Max VolP round Trip Delay allowed for open duplex during handset conversation in AlphaNet''': Applicable only for AlphaNet conversations involving analog ASLT stations using handset. This setting is used if there are more than 12 simultaneous handset calls (i.e. all [[Line Echo Cancellation|LEC resources]] in the AMC-IP are in use).
−
|-valign="top"
+
**''AlphaNet calls:'' The roundtrip delay on a VoIP AlphaNet conversation is measured by the AlphaCom. If the delay is more than the value specified in this parameter, a handset to handset conversation will be forced in voice switched duplex. This is to prevent echo in the handset due to crosstalk in AlphaCom handset (and no echo cancelling).<br>
−
|Use VolP Audio for Multi Module||Disable this flag when using [[AGA]] or [[AE1]] for audio distribution in [[MultiModule]], and not VoIP. Note that it is also possible to use a mix of VoIP audio and conventional AGA/AE1 links. Then this flag must be enabled.
+
**''SIP calls:'' When talking with handset conversation between Intergard station and SIP station the SIP station will get echo in the handset due to crosstalk in AlphaCom handset (and no echo cancelling). Due to this handset to handset communication will be forced in duplex. (Default delay setting for SIP = 30ms. Full duplex can be obtained if this parameter is adjusted to 40 ms or more)
−
|-valign="top"
+
* '''SIP digit collection timeout''': Specifies how long the AlphaCom should wait for more digits before setting up the connection to a SIP device. The timeout is used for "Enbloc dialing", i.e. by [[Call remote exchange feature|feature 81]] and [[Call remote station feature|feature 83]] when the parameter 2 field is used. See also [[SIP_trunk_node_-_configuration#Create_access_numbers|SIP Trunk - access numbers]]
−
|Optimized voice duplex control when conversation with SIP trunk/station||When calling [[SIP]] there can be problems with the standard duplex algorithm due to DSP echo cancelling in the SIP station. A new duplex algorithm is available for duplex towards SIP stations that is speech controlled only from volume of the microphone signal from the SIP link. When this flag is set, the initial voice direction is forced to be from the intercom towards the telephone. When the phone operator starts to speak, the voice direction will switch towards the intercom station, regardless of the level of the audio signal from the intercom station. As soon as the phone operator stops speaking, the voice direction will switch back to the initial direction.
+
* '''SIP Dial Delay''': This setting is applicable to "Overlap dialing" on SIP trunk. After a connection on the SIP trunk is established (i.e. SIP 200 OK is received), the sending of succeeding digits is delayed by the time specified by this timer.  
−
|-valign="top"
 
−
|Incoming calls from SIP in Private Ringing mode||When enabled incoming calls from SIP trunk line or SIP phones will be forced in private ringing mode, regardless of the private/open switch of the intercom station.
 
−
|-valign="top"
 
−
|Use UK style Ringing Tone on Ringing Group Calls from SIP||On: When a [[Ringing Group Feature|Ringing Group]] is called from SIP Trunk a special ringing tone is used. This is to distinguish external phone calls from internal calls. One can choose between different tone types:
 
−
* 500 Hz
 
−
* 400 Hz (Default)
 
−
* Private Ring
 
−
* Attention Tone (muted)
 
−
* Attention Tone
 
−
* Busy Tone (muted)
 
−
* Busy Tone
 
−
* Dial Tone
 
−
Off: Regular Private Ringing tone also from SIP calls.
 
−
|-valign="top"
 
−
|colspan="2"| '''Timers'''
 
−
|-valign="top"
 
−
|Max VolP round Trip Delay allowed for open duplex during handset conversation in AlphaNet||
 
−
''AlphaNet calls:'' The roundtrip delay on a VoIP AlphaNet conversation is measured by the AlphaCom. If the delay is more than the value specified in this parameter, a handset to handset conversation will be forced in voice switched duplex. This is to prevent echo in the handset due to crosstalk in AlphaCom handset (and no echo cancelling).<br>
 
−
''SIP calls:'' When talking with handset conversation between Intergard station and SIP station the SIP station will get echo in the handset due to crosstalk in AlphaCom handset (and no echo cancelling). Due to this handset to handset communication will be forced in duplex. (Default delay setting for SIP = 30ms. Full duplex can be obtained if this parameter is adjusted to 40 ms or more)
 
−
|-valign="top"
 
−
|SIP digit collection timeout:||Specifies how long the AlphaCom should wait for more digits before setting up the connection to a SIP device. The timeout is used by [[Call remote exchange feature|feature 81]] and [[Call remote station feature|feature 83]] when the field "Collect N more digits (SIP)" is used.
 
−
|-valign="top"
 
−
|SIP Dial Delay||After having made a connection to a SIP gateway, further dialing is delayed by the time specified by this timer.
 
−
|-valign="top"
 
−
|colspan="2"|'''Group Calls, Audio Program to IP stations'''
 
−
|-valign="top"
 
−
|Base Address||First multicast address used by this node. Default is empty. If empty the address 239.192.nnn.0 is used, where nnn is node number. Usually this default can be used. Only need to be changed if conflicts with other multicasting applications on the same net. Alphacom may use up to 31 adresses following the base-address. These adresses are used for group call, program conference and audio program to IP stations.
 
−
|-valign="top"
 
−
|Audio Program feed in master||When this flag is enabled [[Audio Program]]s need only to be connected to the master in a [[MultiModule]]. When the flag is disabled Audio Program must be connected in parallel to all modules, as before. Exchange reset is needed after changing the flag.
 
−
|-valign="top"
 
−
|Default rule||Determine how Group Audio is transmitted to IP stations. The default rule is a two-way choice:
 
−
*Multiplied unicast (0)
 
−
*Multicast (1)
 
−
This rule applies to all IP stations which do not match any of the subnet rules 1 - 5. See also [[Multicast in AlphaCom]]
 
−
|-valign="top"
 
−
|Subnet rule 1 - 5||Up to 5 Subnet Rules can be defined to make exceptions from the Default Rule.  
 
  
−
A Subnet Rule applies to IP stations with IP addresses within a given range. The IP address range for the rule is defined using the IP-address + subnet-mask scheme familiar from IP routing tables, see [http://en.wikipedia.org/wiki/Subnetwork http://en.wikipedia.org/wiki/Subnetwork] .
+
'''Group Calls, Audio Programs to IP stations'''
 +
* '''Multicast Base Address''': By default this field is empty (0.0.0.0), and usually this default value can be used. When empty the multicast address 239.192.NN.0 will be used, where NN is the AlphaCom node number. The Multicast Base Address needs to be changed only if there is a conflict with other multicasting applications on the same net. If you enter a new Multicast Base Address, this address and up to 31 subsequent addresses will be used. The multicast addresses are used for group call, program conference and audio program to IP stations. See [[Multicast_in_AlphaCom]] for more details.
 +
* '''Default rule''': Determine how Group Audio is transmitted to IP stations. The default rule is a two-way choice:
 +
**'''Multiplied unicast''' (default) - Audio is distributed by setting up one unicast connection to each of the stations in the group
 +
**'''Multicast''' - Audio is distributed by sending the VoIP audio to a multicast address
 +
: This rule applies to all IP stations which do not match any of the subnet rules 1 - 5.
  
−
A dropdown list with three alternatives tell how each of the 5 subnets are handled :
+
* '''Subnet rule 1-5''': Up to 5 Subnet Rules can be defined to make exceptions from the "Default rule". A Subnet Rule applies to IP stations with IP addresses within a given range. The IP address range for the rule is defined using the IP-address + subnet-mask scheme familiar from IP routing tables, see [http://en.wikipedia.org/wiki/Subnetwork http://en.wikipedia.org/wiki/Subnetwork]. A dropdown list with three alternatives tell how each of the 5 subnets are handled:
−
* Relayed multicast (0) - the subnet forms a Relay Group
+
** '''Relayed multicast''' - the subnet forms a Relay Group
−
* Multiplied unicast (1)
+
** '''Multiplied unicast'''
−
* Multicast (2)
+
** '''Multicast'''
  
−
After changing the Subnet Rules, AlphaCom has to be reset.
+
: After changing the Subnet Rules, AlphaCom has to be reset.
  
−
When a station registers with the AlphaCom, AlphaCom checks the 5 rules in turn to find a address match. The search stops when the first match is found. This means that it is possible to specify a rule with a narrow address range, followed by a different rule for a address range which is superset of the first rule. Stations which do not match rule 1, but rule 2 will use rule 2.
+
:When a station registers with the AlphaCom, AlphaCom checks the 5 rules in turn to find a address match. The search stops when the first match is found. This means that it is possible to specify a rule with a narrow address range, followed by a different rule for a address range which is superset of the first rule. Stations which do not match rule 1, but rule 2 will use rule 2.
−
|}
+
 
 +
<br>
 +
 
 +
===Recording===
 +
This window is used to configure audio recording. The audio recording is taking place on an external computer. AlphaCom communicates with the recorder using the SIP protocol. For more information, see the [[:Category:Recording|Recording category]]
 +
[[File:AP Recording.png|thumb|500px|The Exchange & System > System > Recording window|none]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 +
 +
* '''Username''':
 +
** ''Primary Recorder'':  Enter the registration name of the recorder in the '''Username''' field for the '''Primary Recorder'''
 +
** ''Secondary Recorder'': If there is a redundant recorder as well, enter its registration name in the '''Username''' field for the '''Secondary Recorder'''
 +
 +
*Redundant recording:
 +
**As from ICX-AlphaCom '''1.1.3.0''', AlphaCom will record on both defined recorders in parallel
 +
**For all other ICX-AlphaCom and AlphaCom software versions: AlphaCom will first attempt to record a conversation on the Primary Recorder but if that recorder is not available, the Secondary Recorder will be used. <br />
 +
 +
* '''IP Address''':
 +
** ''Primary Recorder'': Leave this field blank when using STENTOFON recording software. Only used when required by 3rd party recording software
 +
** ''Secondary Recorder'': Leave this field blank when using STENTOFON recording software. Only used when required by 3rd party recording software
 +
 +
* '''Force Mono Recording''': Only used when required by 3rd party recording software. When enabled there will be a single SIP connection and RTP stream from the AlphaCom to the recorder. The RTP stream will contain audio from both parties in a conversation. When using STENTOFON recording software this flag should be disabled, causing two SIP connections and RTP streams from the AlphaCom to the recorder, allowing the user to listen to one or the other party in a conversation.
 +
 +
* '''Recording on demand''': When the "Recording On Demand" is enabled, no recording will be activated in the system by default. All recording must be started with the [[REC|$REC command]].
 +
 +
* '''Codecs'''
 +
** '''All''': Enable (default) when all codecs are supported by the recording software (default for STENTOFON recording software). Disable only when required by 3rd party recording software to specify certain codecs.
 +
 +
<br>
  
 
== UDP Text==
 
== UDP Text==
−
[[Image:UDP Text.jpg|thumb|300px|The Exchange & System > UDP Text window]]
+
[[UDP group|UDP Groups]] are used by the [[Event Handler]] to give common properties to a group of stations. Each UDP Group can be assigned a text to describe what the UDP Group is used for. This text will also appear in the Event Handler when refering to the UDP Group.
−
By entering a descriptive text (names) for the [[UDP|UDP groups]] it will be easier to remember what the UDP groups are used for.<br>
+
[[File:AlphaPro UsersStationsUDPtext.png|500px|thumb|The Exchange & System > UDP Text window|none]]
−
The UDP groups are defined in two steps:
+
 
−
*Include stations in UDP groups from [[Users_%26_Stations_%28AlphaPro%29#UDP|Users & Stations -> UDP]]
+
{{note| The ''UDP Text'' is not transferred to the AlphaCom server. It is stored locally on the PC only. }}
−
*Set up the behavior of the UDP group in the [[Exchange_%26_System_%28AlphaPro%29#Events|Event Window]].
+
 
−
'''Note''': that if the exchange is part of an AlphaNet installation, the UDPs should have identical programming in all exchanges.  
+
<br>
−
<br style="clear:both;" />
 
  
 
==RCI ==
 
==RCI ==
  
 
===Inputs===
 
===Inputs===
−
[[Image:Inputs.png|thumb|200px| The Exchange & System > RCI > Inputs window]]
+
The Input window is used for configuration of inputs connected to AlphaCom XE servers, [[IPARIO|IPARIO units]], [[RIO|RIO units]] and [[ENA_Amplifier_-_Mounting_and_Installation#Control_Inputs|ENA Amplifiers]].
 +
{{note|Inputs on [[:Category:Stations#Turbine_stations|Turbine]] and [[:Category:Stations#INCA_stations|INCA stations]] must be configured via the [[Event Handler]], see [[RCI_-_Remote_Contol_Input#Inputs_from_IP_Stations|Input from IP Stations]] }}
 +
[[Image:AP RCI Inputs.png|thumb|500px|none|The Exchange & System > RCI > Inputs window]]
 +
 
 +
 
 +
* '''Description''': Any text describing the usage of the input. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only.
 +
 
 +
* '''RCI Type''':
 +
** '''Device''': Use "Device" when the input is physically connected to an AlphaCom server or a [[RIO|RIO unit]]
 +
***'''Device Number''':
 +
**** 1 - 64 = External [[RIO|RIO unit]]. The device number is set by switch settings on the RIO board
 +
**** 65 = AlphaCom server
 +
**** 66 - 68 =  AlphaCom Slave modules in a [[MultiModule]] system
 +
** '''Station''': Use "Station" when the input is physically connected to an [[IPARIO|IPARIO unit]] or an [[ENA_Amplifier_-_Mounting_and_Installation#Control_Inputs|ENA Amplifier]]
 +
*** '''Station Number''': The [[physical number]] of the IPARIO or ENA Amplifier
 +
 
 +
*'''Pin number''': Each input is numbered from 1 and upwards:
 +
** [[AlphaCom XE26]]/[[AlphaCom XE20]]: Pin numbers 1-6
 +
** [[AlphaCom XE7]]: Pin numbers 1-2
 +
** [[RIO|RIO unit]]: Pin numbers 1-8
 +
** [[IPARIO|IPARIO unit]]: Pin numbers 1-6
 +
** [[ENA_Amplifier_-_Mounting_and_Installation#Control_Inputs|ENA Amplifier]]: Pin numbers 1-8
 +
** Temperature alarm: Internal pin number 8 is the [[Temperature Alarm|temperature alarm]], which by default will send a "Temperature Alarm" message to the station on physical number 1, and write to the [[System_log#Temperature_alarm|System log]]
 +
 
 +
* '''ON Action''': Enter the [[Event_Handler#Action_Commands|action command]] to take place when the RCI input is turned on. It is possible to have several commands separated by semicolons <;>. Maximum 40 characters. If this is not sufficient the data command [[EVENT REPORT|$ER]] can be used to trigger an event in the event handler, and the actual commands can be executed there.
  
−
{|border="1"
+
* '''OFF Action''': Enter the [[Event_Handler#Action_Commands|action command]] to take place when the RCI input is turned off. It is possible to have several commands separated by semicolons <;>.
−
|Description||Any text describing the [[RCI|RCI input]]
 
−
|-valign="top"
 
−
|Device number||
 
−
* 1 - 64 = External [[RIO|RIO unit]]. The device number must match the address set by switch settings on the RIO board
 
−
* 65 = Exchange (Master module)
 
−
* 66 - 68 = Slave modules in a [[MultiModule]] system (available from AMC software 10.50)
 
−
|-valign="top"
 
−
|Pin number||
 
−
* [[AlphaCom_E26]]/[[AlphaCom_E20]]: The internal RCI's are pin number 1-6
 
−
* [[AlphaCom_E7]]: The internal RCI's are pin number 1-2
 
−
* External [[RIO|RIO units]]: The pin numbers are 1-8
 
−
* Internal pin number 8 is the temperature alarm, which by default will send a "Temperature Alarm" message to the station on physical number 1, and write to the [[System_log#Temperature_alarm|System log]]
 
−
|-valign="top"
 
−
|On Action||Enter the [[Event_Handler#Action_Commands|action command]] to take place when the RCI input is turned on. It is possible to have several commands separated by semicolons <;>. Maximum 40 characters. If this is not sufficient the data command [[EVENT REPORT|$ER]] can be used to trigger an event in the event handler, and the actual commands can be executed there.
 
−
|-valign="top"
 
−
|Off Action||Enter the [[Event_Handler#Action_Commands|action command]] to take place when the RCI input is turned off. It is possible to have several commands separated by semicolons <;>.
 
−
|-valign="top"
 
−
|On When Closed||Generate alarm on closed or open contact
 
−
* Checked (default): Normal Open (NO) contact. The ON Action is activated when the contact closes, and OFF action when it opens
 
−
* Unchecked: Normal Closed (NC) contact. The ON Action is activated when the contact opens, and OFF action when it closes
 
−
|-valign="top"
 
−
|Delay ON Action ||The time from the RCI is activated to the action is carried out. If the RCI in the waiting time is deactivated, the action is not carried out. Value is shown in 100 msec units. Maximum value 65 000 = 1 hour 48 minutes. This can be used for two purposes:
 
−
* Stabilizing of the line, to debounce any unwanted signals.
 
−
* Delayed call/alarm. For example, used with an alarm button in a lift. The button will have to be pressed down for a certain time to activate the alarm signal. Thus an unintended short press will be ignored.  
 
  
−
|-valign="top"
+
* '''On When Closed''': Generate alarm on closed or open contact
−
|Activate Faulty Module LED||When enabled the [[Status LED]] will turn red when the RCI is activated (ON), and will go green when the RCI goes to OFF
+
** Checked (default): Normal Open (NO) contact. The ON Action is activated when the contact closes, and OFF action when it opens
−
|-valign="top"
+
** Unchecked: Normal Closed (NC) contact. The ON Action is activated when the contact opens, and OFF action when it closes
−
|}
+
 
−
<br style="clear: both;" />
+
*'''Delay Before ON Action''': The time from the RCI is activated to the action is carried out. If the RCI in the waiting time is deactivated, the action is not carried out. Value is shown in 100 msec units. Maximum value 65 000 = 1 hour 48 minutes. This can be used for two purposes:
 +
** Stabilizing of the line, to debounce any unwanted signals.
 +
** Delayed call/alarm. For example, used with an alarm button in a lift. The button will have to be pressed down for a certain time to activate the alarm signal. Thus an unintended short press will be ignored.
 +
 
 +
* '''Activate Faulty Module LED''': When enabled the [[Status LED]] in front of the AlphaCom XE20/XE26 will turn red when the RCI is activated (ON), and will go green when the RCI goes to OFF. Use case: Connect the Fault relay from the Power Supplies to an RCI input to indicate with the status LED if there is a power supply error.
 +
 
 +
<br>
  
 
===Faults===
 
===Faults===
−
[[Image:Faults.png|thumb|200px| The Exchange & System > RCI > Faults window]]
+
Fault reports, such as station errors, are by default sent to station on [[physical number]] 1. In this window you can change the receiver of such error reports, or you can remove the reporting.
−
{|border="1"
+
[[Image:AP RCI Faults.png|thumb|500px|none|The Exchange & System > RCI > Faults window]]
−
|Description||Any text describing the specified fault.  
+
 
−
|-valign="top"
+
 
−
|On Action||Enter the action command to take place when the specified fault occurs. It is possible to have several commands separated by semicolons <;>. Maximum 40 characters. If this is not sufficient the data command [[EVENT_REPORT|$ER]] can be used to trigger an event in the event handler, and the actual commands can be executed there.
+
'''Fault cases:'''
−
|-valign="top"
+
* '''Faulty Line''': Triggered when there is a station error. All types of stations (IP Stations, SIP phones, analog [[ASLT]] stations and [[ATLB-12]] phones) are monitored and reported
−
|Off Action||Enter the action command to take place when the specified fault is corrected. It is possible to have several commands separated by semicolons <;>.
+
* '''Faulty Board''': Triggered if there is an error on one of the AlphaCom feature boards [[ASLT]], [[ATLB-12]], [[AGA]] or [[ASVP]].
−
|}
+
* '''Faulty Device''': Triggered if there is communication error between AlphaCom and a [[RIO|RIO unit]], or between AlphaCom Master Module and a Slave Module in a [[MultiModule|MultiModule system]]
−
<br style="clear:both;" />
+
* '''Faulty AGA Line''': Triggered if there is an error on an analog AGA line between AlphaCom servers in [[AlphaNet]] or [[MultiModule]]
 +
 
 +
* '''Description''': Any describing text. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only.
 +
 
 +
* '''ON Action''': Enter the action command to take place when the specified fault occurs. It is possible to have several commands separated by semicolons <;>. Maximum 40 characters. If this is not sufficient the data command [[EVENT_REPORT|$ER]] can be used to trigger an event in the event handler, and the actual commands can be executed there.
 +
** The default "ON Action" will send the fault reports to station 1.
 +
** '''MST 1 0 28''' means:
 +
*** [[MST - Mail to Station|MST]] = Mail to STation
 +
*** 1 = Physical number of station to receive the error report
 +
*** 0 = Filler (always use "0")
 +
*** 28 = Station Line error. Other codes are: 27 = Board error. 29 = Decvice error. 30 = AGA Line error.
 +
** If the error reports should be sent to another station, simply change the first parameter. '''MST 23 0 28''' will send Station Error reports to station 23.
 +
** If the error reporting should be removed, simply delete the text in the "ON Action" field.
 +
 
 +
* '''OFF Action''': Not in use.
 +
{{note|
 +
* ''Errors are reported only when they occur, not when the error is cleared''
 +
* ''Errors are also reported via the [[Event Handler]]. Here they are also reported when the error is cleared'' }}
  
 
==Serial Ports==
 
==Serial Ports==
−
[[Image:Picture.png|thumb|400px| The Exchange & System > Serial Ports window]]
+
The '''Serial Ports/Data Links''' window lets you configure external communication using TCP/IP or serial link RS232 (or RS422/485).
  
−
{|border="1"
+
[[Image:AlphaPro Serial Ports window.PNG|thumb|500px|none|The Exchange & System > Serial Ports window]]
−
|Enabled||The serial port must be enabled if you want to use it. After enabling of a serial port, the exchange must be reset before the programming takes effect.
+
 
−
|-valign="top"
+
{{note|In ICX-500 and ICX-AlphaCom Core the license "''[[Licenses_for_ICX-500_and_ICX-AlphaCom_Core|1002602400 ILI-IF]]''" is required to enable these ports}}
−
|Port Type||Description missing
+
 
−
|-valign="top"
+
{{obs|Any changes in the Serial Ports window will require a reset to take effect! }}
−
|Drivers||Available Options are:
+
 
−
:*MPC Data Protocol - connection of MLH/CRM stations and PNCI units
+
* '''Drivers''': Available drivers/protocols are:
−
:*Tateco - pocket pager - used for communication with pocket paging system
+
** '''MPC Data Protocol''': The proprietary [[MPC Data Protocol]]. Used by some system integrators
−
:*Ercisson - pocket pager - used for communication with pocket paging system
+
** '''Tateco''': [[Pocket Paging|Pocket pager]] - used for communication with pocket paging system using the ESPA 4.4.4 protocol
−
:*Multitone - pocket pager - used for communication with pocket paging system
+
** '''Ercisson''': Pocket pager - used for communication with pocket paging system using the ESPA 4.4.4 protocol
−
:*System Logging - used for connection of printer/PC for logging of error reports
+
** '''Multitone''': Pocket pager - used for communication with pocket paging system using the ESPA 4.4.4 protocol
−
:*ACDP Link - AlphaCom Data Protocol used for communication between the exchanges in an [[AlphaNet]] installation and between the exchange and an external device such as [[RIO]]
+
** '''System Logging''': Obsolete. Was originally used for connection of serial printer/PC for logging of error reports. Logging is now configured via the [[AlphaWeb#Logging_2|AlphaCom web interface]]
−
:*Fire Alarm - Used for connection to Fire Alarm Control Panels
+
** '''ACDP Link 1-7''' - The proprietary AlphaCom Data Protocol
−
:*Inter Module - used to link the different Main Frames together in a [[MultiModule|multi-module]] system
+
*** Avaliable '''Link Types''':
−
:*EDIO - External Data Input/Output - A simple ASCII "fire and forget" driver for RS232. It is intended for interfacing to external equipment like CCTV (viedo matrix). This functionality has many possible applications:
+
**** '''ISO1745 Point to Point - RIO,PC''': Normally used for RS232 communication with the [[RIO|RIO unit]].
−
:-Video Control
+
**** '''ISO1745 Multidrop - RIO''': Normally used for RS485 (bus) communication with the [[RIO|RIO unit]].
−
:-Special messages in TouchLine protocol, and/or station filtering
+
**** '''Stentofon Link Layer - AlphaNet'''. Normally used for RS232 or RS422 communication with another AlphaCom in AlphaNet.
−
:-Simple Call Logger port reporting a few events, possible for a limited number of stations
+
**** '''Stentofon Multidrop Slave - Reserved'''. A master/slave protocol for special purposes
−
''Note that the [[AlphaPro]] or the AlphaCom can not verify the correctness of such data commands, so they must be tested after commissioning. The mechanism is very powerful, though, and enables user-defined functionality previously requiring external microprocessor systems
+
**** '''Stentofon Multidrop Master - Reserved'''. A master/slave protocol for special purposes. Also used by [[AlphaVision]].
−
|}
+
**** '''Stentofon Simple Link Layer - PC'''. The [[Stentofon Simple Link Layer]] is a point-to-point link layer which can be used as an operator interface. To get response messages back to the port, one must define at least one external device on this port. Enable "Broadcast" if [[Broadcast messages (ACDP)|ACDP broadcast messages]] should be transmitted.
−
<br style="clear:both;" />
+
*** '''Broadcast''': Enable "Broadcast" if [[Broadcast messages (ACDP)|ACDP broadcast messages]] should be transmitted.
 +
*** '''Destination''': Any descriptive text. Note that this text is not transferred to the AlphaCom server. It is stored locally in the PC only.
 +
** '''Fire Alarm''' - Used for connection to Fire Alarm Control Panels using the ESPA 4.4.4 protocol
 +
** '''Inter Module''' - Proprietary protocol used for serial RS232 communication between AlphaCom modules in a [[MultiModule|MultiModule]] system. '''Note''': Do not enable this port if MultiModule is interconnected via IP.
 +
** '''EDIO 1-10''':
 +
*** '''EDO''' ([[EDO|External Data Output]]) is a user definable ASCII text protocol intended for CCTV control, making customized logs etc. Up to ten EDO ports can be defined. EDO is controlled from the [[Event Handler]] where it can be configured to send free text merged with parameters for the active stations. Ascii control characters can be generated by using [[Character escape codes|character escape codes]].
 +
*** '''EDI''' ([[External Data Input]]) is used to receive ASCII text from external equipment. The input message must have a termination character. Maximum 128 characters. Parsing the content is done in the action string in the [[Event Handler]]
 +
**** '''Start Character''' (Optional): Enter the ascii descimal value of the start character to indicate the beginning of the string. The hex value of the character will show up next to the entry.
 +
**** '''Stop Character''': (Must): Enter the ascii descimal value of the stop character to use to terminate the input string. The hex value of the character will show up next to the entry. Default value is 10 (= Line feed)
 +
 
 +
* '''Enabled''': After enabling a driver/protocol, the AlphaCom have to be restarted for the change to takes effect.
 +
 
 +
* '''Port Type''':
 +
** '''Serial 0/1''': When selecting serial port, additional parameteres become available:
 +
*** '''Bit Rate''': 1200, 2400, 4800, 9600, 19200 or 38400. '''Parity''': None, Even or Odd. '''Data Bits''': 7 or 8. '''Stop Bits''': 1 or 2.
 +
** '''TCP/IP Server''': When selecting TCP/IP Server, additional parameteres become available:
 +
*** '''Port''': Specify which TCP port number the AlphaCom should listen to. Note that the port number also must be defined in the AlphaCom firewall. From AlphaWeb select [[AlphaWeb#Filters|System Configuration > Filters]].
 +
*** '''Keep Alive''': If there is no activity on a TCP/IP link, the link will time out and will be closed by the server. When "Keep Alive" is enabled, a KeepAlive message will be sent every 5 seconds to keep the link active.
 +
** '''TCP/IP Client''':
 +
*** '''IP Address''': Enter the IP Address of the remote party in IPv.4 format (e.g. 192.168.0.5)
 +
*** '''Port''': Specify which TCP port number to use for the connection.
 +
*** '''Keep Alive''': If there is no activity on a TCP/IP link, the link will time out and will be closed by the server. When "Keep Alive" is enabled, a KeepAlive message will be sent every 5 seconds to keep the link active.
 +
*** Define when the connection should be established:
 +
**** '''Connect at AlphaCom startup''' (default) If the client disconnects, AlphaCom will try to reconnect immediatly.
 +
**** '''Connect at AlphaCom write'''
 +
**** '''Connect at AlphaCom write, disconnect after each write'''
 +
** '''IP-ARIO''': The [[IPARIO]] can be used as an Ethernet to Serial converter. The RS232 serial port of the IPARIO can be connected to external equipment, and the IPARIO converts the data from serial to IP, and communicates with the AlphaCom using TCP/IP. The communication parameters of the serial port in the IPARIO is configured in AlphaPro. The AlphaCom will forward these parameters to the IPARIO when the IPARIO goes online:
 +
*** '''Bit Rate''': 1200, 2400, 4800, 9600, 19200 or 38400. '''Parity''': None, Even or Odd. '''Data Bits''': 7 or 8. '''Stop Bits''': 1 or 2.
 +
*** '''Station''': The physical number used in AlphaCom by the IPARIO.
 +
*** '''Port''': Specify which TCP port number to use for the connection with the AlphaCom.
 +
{{Note|
 +
* ''When using the RS232 serial port of the IPARIO, the TCP port number used for the communication with the AlphaCom server must be added in the firewall of the AlphaCom. In AlphaWeb, select [[AlphaWeb#Filters|System Configuration > Filters]].''
 +
* ''Failing to do so will cause the IPARIO to '''reboot over and over again''', trying to establish connection with the AlphaCom''.}}
 +
 
 +
<br>
  
 
==NetAudio ==
 
==NetAudio ==
 +
In the '''NetAudio''' window you can configure static (fixed) audio links between AlphaCom serveres (AlphaNet), and you can reserve VoIP Channels for SIP trunks.
 +
{{note|Unless you are using [[Licenses#AlphaNet_license|AlphaNet Static license]], you can normally leave the NetAudio table blank}}
 +
[[Image:AP NetAudio 606.PNG|thumb|500px|none|The Exchange & System > NetAudio window]]
 +
 +
 +
'''When to use the NetAudio table''':
 +
* The NetAudio table '''is not used''' used when:
 +
** Using [[Licenses#AlphaNet_license|AlphaNet Dynamic license]] between AlphaCom servers in AlphaNet
 +
* The NetAudio table '''might''' be used:
 +
** If using [[Licenses#AlphaNet_license|AlphaNet Dynamic license]] between AlphaCom servers in AlphaNet, but want to reserve some VoIP channels to a dedicated AlphaCom server.
 +
** If one want to reserve VoIP channels for a SIP Trunk, see [[SIP_trunk_node_-_configuration#Reserving_VoIP_channels_for_a_SIP_trunk|Reserving VoIP channels for a SIP trunk]] for details.
 +
* The NetAudio table '''must''' be filled in when:
 +
** Using [[Licenses#AlphaNet_license|AlphaNet Static license]] between AlphaCom servers in AlphaNet
 +
** Connecting AlphaCom servers in AlphaNet by means of [[AGA|AGA boards]]
 +
** Connecting AlphaCom servers in AlphaNet by means of [[AE1|AE1 boards]]
 +
 +
 +
'''Source'''
 +
*'''Source''':The name of the source node
 +
*'''Description''': This field is automatically filled in
 +
*'''Physical No''':The physical number used by the VoIP channel, AGA board or AE1 board in the source exchange
 +
** VoIP Channels use virtual physical numbers: 605 - 634
 +
** AE1 boards are using 6 physical numbers according to the board position, and in addition virtual physical numbers: 553 - 604
 +
** AGA boards are using 6 physical numbers according to the board position: 1 - 138
 +
* '''Mod/Pos/Line''': This is automatically filled in, as a result of the chosen physical number
  
−
[[Image:Net Audio.png|thumb|400px| The Exchange & System > NetAudio window]]
+
'''Destination'''
−
{|border="1"
+
* '''Destination''': The name of the destination node
−
!colspan="2"|Source
+
* '''Description''': This field is automatically filled in
−
|-valign="top"
+
*'''Physical No''':The physical number used by the VoIP channel, AGA board or AE1 board in the destination exchange
−
|Source||Description Missing
+
* '''Mod/Pos/Line''': This is automatically filled in, as a result of the chosen physical number.
−
|-valign="top"
+
* '''Channel No'''.: The audio channel number for the connection between the two exchanges. The channel number is an internal index number. Normally you use the channel number that AlphaPro suggests you to use. The same channel number might be reused towards different destination exchanges.
−
|Description||Reflects information entered when the exchange was created
+
* '''Use dynamic license''': Enable this flag if the destination node is using [[Licenses#AlphaNet_license|AlphaNet Dynamic license]]
−
|-valign="top"
 
−
|Physical No:||The physical number for the selected channel on the AGA board in the source exchange
 
−
|-valign="top"
 
−
|Mod/Pos/Line||This is automatically entered, as a result of the chosen physical number
 
−
|-valign="top"
 
−
!colspan="2"|Destination
 
−
|-valign="top"
 
−
|Destination||Description Missing
 
−
|-valign="top"
 
−
|Description||Reflects information entered when the exchange was created
 
−
|-valign="top"
 
−
|Mod/Pos/Line||Description Missing
 
−
|-valign="top"
 
−
|Channel No.||The audio channel number for the connection between the two exchanges. The channel number is an index number for the channels between two exchanges. The same channel number can be used for a channel to a different exchange.
 
−
|}
 
−
<br style="clear:both;" />
 
  
−
==Ping ==
 
  
−
==Board ==
+
See the [[AlphaNet#2-line_static_license_-_details|AlphaNet article]] for some examples on how to configure NetAudio.
−
[[Image:Board.png|thumb|400px| The Exchange & System > Board window]]
 
−
{|border="1"
 
−
|Module, Board, Port||Is entered automatically by AlphaPro according to the highlighted port
 
−
|-valign="top"
 
−
|Physical Number||The physical position where the relevant AGA board is installed - see Appendix page 229 for board positions.  
 
−
|-valign="top"
 
−
|Port use||The following options are available:
 
  
−
Default - uses the default setup for AGA board; see Appendix page 229 for functions of AGA board in different positions<br>
+
<br>
−
Open Duplex Conference Mixer - uses the port for open duplex conference. One AGA port can handle 2 simultaneous participants in an open duplex conference.
 
  
−
Station - this option is intended for connection of audio equipment not using the audio interface on the ASLT board. Typically this option can be used to connect a mobile radio system without using the FBSAR board. The equipment is treated like a station in the AlphaCom system
+
==Ping ==
 +
[[Image:AlphaPro Ping.png|thumb|500px|The Exchange & System window - '''Ping''' button|none]]
  
−
Multiconference Monitor - is used with the multiconference feature.<br>
 
−
Audio Program Feed - this option is intended for use with an ASLT board used  for program distribution
 
  
−
Reserved 5 - for special purposes.<br>
+
The '''Ping''' button gives the opportunity to test the network before trying to send data. It is also a quick and useful tool to check the network if AlphaPro is unable to communicate with the exchange.
−
Reserved 6  - for special purposes.
 
  
 +
If communication with the AlphaCom server cannot be obtained by pressing ''Get All'', ''Send All'' or ''Send Change'', then pressing the '''Ping''' button can give valuable information:
 +
 +
If the '''Ping''' test returns '''Successful''', the network is ok. Check that the TCP port 60001 (which is used by AlphaPro) is open in [[AlphaWeb#Filters|AlphaWeb > Filter Settings]].
  
 +
If the '''Ping''' test returns '''Failed''', it means the network connection with the AlphaCom server is not OK. Check these factors:
 +
* Cable error
 +
* The AlphaCom server is connected to the wrong ethernet port
 +
* Your PC is not configured with an IP address in the same range
 +
* AlphaPro is set to communicate with the wrong ethernet port
 +
* AlphaPro is configured with the wrong IP address
 +
* Ping is blocked in a network component (switch/router)
  
−
|}
+
<br>
  
 +
==Board ==
 +
The '''Board''' table is used to modify the default behavior of the ports on  [[AGA|AGA boards]] and [[ASLT|ASLT boards]].
 +
[[Image:AlphaPro Board window.PNG|thumb|500px|left|The Exchange & System > Board window]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
==Events ==
+
* '''Module, Board, Port''': Shows which '''Module''' (65 = AlphaCom), '''Board''' position (1-24) and '''Port''' number (1-8) according to the selection in the list box
−
[[Image:Events.png|thumb|400px| The Exchange & System > Events window]]
+
* '''Physical Number''': The physical position according to the selection in the list box.
−
{|border="1"
+
* '''Port use''': The following options are available:
−
!colspan="2"|Owner
+
**'''Default''': Use the default Port Use.
−
|-valign="top"
+
*** For ASLT boards the "Default" Port Use means that the port is used for [[:Category:Stations#Analog_4-wire_stations|Intercom Station]].
−
|Owner Type||The options are:
+
*** For AGA boards the "Default" Port Use depends on the board position in the module. In position 18-21 Audio Program is default, and in position 22-24 MultiModule audio is default.
−
:*Station  
+
**'''Open Duplex Conference Mixer''': '''''Obsolete'''''. The AGA board could previosly be used for duplex (handsfree) conference mixing. In AlphaCom XE (and AlphaCom E) this is handled by the [[AMC-IP|AMC-IP board]] itself.
−
reflects the station’s physical number. If you come from the station screen to the event screen, the field is set to the current station and cannot be changed. If you come from the system window to the event screen, you can fill in the owner field for any station or User Defined Properties UDP. Note that when the entry has been saved, the owner field cannot be changed. The event owner is always within your local exchange.
+
**'''Station''': Configure a port of the AGA board to behave as a "Station". You'll get 0dBm audio in and out. The port can be called to by its directory number, and it can be included in e.g. Simplex Conference and Group Calls. Useful for PA and Mobile Radio integration. Equivalent to [[ASLT]] + [[FBSAR]].
−
:*Stations with [[UDP|User Defined Property (UDP)]]
+
**'''Multiconference Monitor''': '''''Obsolete'''''. The AGA board could previosly be used for multiconference mixing. In AlphaCom XE this function is replaced by an [[Multiconference|IP based MultiConference feature]].
−
is used when a group of stations with identical properties should react to an event.  
+
**'''Audio Program Feed''': A port of the ASLT or AGA board can be configured as an Audio Program input.  By default physical numbers 5 and 6 in an AlphaCom XE7 are configured for Audio Program Feed. If these ports are to be used for intercom stations instead, the Port Use must be set to "Default". See [[Physical number 5 and 6 (AlphaCom E7)]] for more details.
 +
**'''Reserved 5''': Not in use.
 +
**'''Reserved 6''': Not in use.
  
−
|-valign="top"
+
<br>
−
!colspan="2"|Event
 
  
−
|-valign="top"
+
==Events ==
−
|Event Type||What exchange event should cause the action. The drop-down list gives all possible [[Event_Handler#Events_Types|events types]]
+
The [[Event Handler]] is based on the concept that when intercom functions run, they report 'events' to a part of the software called the Event Handler. The event can be described as a trigger that sets off an action in the system depending on the information entered here in [[AlphaPro]].  
 +
[[Image:AlphaPro Event window.PNG|thumb|500px|left|The Exchange & System > Events window]]
 +
<br style="clear:both;" />
  
−
|-valign="top"
+
'''Free Events''': Shows how many events are free out of the total of 2000 events.
−
|Sub event||Some events have a subtype.<br>
 
−
Audio events: the number here is entered when you activate the different flags.  
 
  
−
|-valign="top"
+
'''Free Action Strings''': Each line of action commands count as one Action String. If the line is longer than 16 characters, it will count as 2 action strings. This field shows how many action strings are free out of the total of 2000 available action strings.  
−
|Details||Click Flags to get access to the flag help.   Sets the event subtype. Also see details in the Event List on page 94.
 
  
−
|-valign="top"
+
'''Show All''': When checked, all events in the system will be shown, not only events for the particular station highlighted when the Event window was opened.
−
|When change to||The action is executed at a specific event transition, i.e. when the defined event goes on and/or off. The options are:
 
  
−
Always Default value.   Both ON and OFF transitions match.<br>
+
'''Owner'''. The '''owner''' is the source which triggers the event.
−
OFF when the event goes OFF only<br>
+
* '''Owner type'''. The options are:
−
ON when the event goes ON only
+
**'''Station Id''': A single station. The Id = [[Physical number]] of the station
 +
**'''Stations w. UDP''': A [[UDP group|group]] of stations. The Id = [[UDP group]] 1 - 8
 +
**'''Scheduler''': [[Scheduler (Event Type)|Scheduler]] use the Realtime clock of the AlphaCom as event owner. Event can be configured to trigger at specified hours, weekdays or dates
 +
**'''EDI Text Config''': Trigger event when receiving text on an [[External Data Input|EDI port]]
  
−
|-valign="top"
+
'''Event'''
−
|When Related to||*All
+
* '''Event Type''': Select which event should cause the action. Here an [[Event_Handler#Events_Types|overview of event types]].
−
The event is carried out with no check on the related number, i.e. works for all stations. Many events have no related number available, and in that case the field is not available.
+
* '''Details''': This button is enabled when choosing the Event Type: 1 - Audio. One can then choose which type of audio to trigger the event. See [[Audio_(Event_Type)]]
−
*Directory Number
+
* '''Sub Event''': Some events have a subevent which makes it possible to filter on more options than only the main event it self.
−
The action is executed when the event owner is connected to the defined station/feature. The id field is two-part:
+
* '''When Change To''': The action is executed at a specific event transition, i.e. when the defined event goes on and/or off. The options are:
−
:*the first is an AlphaNet node number (0 meaning own exchange)
+
**'''OFF'''      - The event is triggered only when the event goes off
−
:*the second is a directory number: a station or feature, local or remote.
+
**'''ON'''        - The event is triggered only when the event goes on
−
*Station with UDP<br>
+
**'''ON or OFF''' - The event is triggered when the event goes on, and also when the event goes off
−
The action is executed when the event owner is connected to any station with this User Defined Properties UDP. The id is a property flag 1 - 8.
+
*'''When Related To'''
 +
**'''All''': The event is carried out with no check on the related number, i.e. works for all stations. Many events have no related number, and in that case the fields are not available
 +
**'''Directory Number''': The action is executed when the event owner is connected to the defined station or feature directory number. The id field has two parts:
 +
*** '''Node''': An [[AlphaNet]] node number (0 = own server). '''ID''': The [[Directory number]] of a station or feature
 +
**'''Stations w. UDP''': The action is executed when the event owner is connected to any station which is member of the specified [[UDP group]]. The Id specifies the UDP group 1-8.
  
−
|-valign="top"
+
'''Action Command or RCO'''
−
!colspan="2"|Action Command or RCO
+
* When the upper radio button is selected, you can write [[Event_Handler#Action_Commands|action commands]] which will be executed when the event is triggered. One command per line.  
−
|-
+
* When the lower radio button is selected, you can select one RCO (Remote Control Output) to be operated by the event.  
−
|Action Command or RCO||*Upper radio button = Command.<br>
+
* The button '''RCO''' opens the [[Exchange_%26_System_(AlphaPro)#RCO|RCO table]], where you can map logical RCO numbers to physical outputs.
−
You use a defined set of command strings; see the table below. Press the button “Action ?” at the top to display help for the command strings on the screen.  It is possible to do a copy/paste from the help window to the command field in this window.
 
−
*Lower radio button = RCO<br>
 
−
Here you define the RCO output you want to activate for the defined event.<br>
 
−
Press the RCO button to go the RCO window.  
 
  
−
|}
+
[[Image:Event ActionCommands.png|thumb|700px|left|Action Commands or RCO]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 +
<br>
 +
<br>
  
 
==RCO ==
 
==RCO ==
−
[[Image:RCO.png|thumb|400px| The Exchange & System > RCO window]]
+
[[RCO|RCOs (Remote Control Output)]] are used for operation of relays for door opening, call indication etc. In the RCO table logical RCOs are mapped to physical outputs.  
−
{|border="1"
+
 
−
|RCO number||The "logical" number of the [[RCO]]. Use this number in the [[RCO - Set Remote Control Output|RCO command]].
+
The physical outputs are given as:
−
|-valign="top"
+
* Device + Pin Number, or by
−
|Description||This information is stored in the AlphaPro database only, and is not sent to the exchange.  
+
* Station + Pin Number.
−
|-valign="top"
+
 
−
|RCO Type||''Device'': The AlphaCom (i.e. [[ASLT]] or [[ATLB]] board) or [[RIO]] unit<br>
+
[[Image:AlphaPro RCO window.PNG|thumb|500px|left|The Exchange & System > RCO window]]
−
''Station'': IP Station
 
−
|-valign="top"
 
−
|Device||1 - 64 (RIO) or 65 (AlphaCom). When 'RCO Type' is set to ''Station'' enter the physical number of the IP Station
 
−
|-valign="top"
 
−
|Pin number||AlphaCom (65): pin 1 - 138. Pin 1 - 552 from AMC 10.50<br>
 
−
RIO (1 - 64): Pin 1 - 8 <br>
 
−
Station: Pin 1
 
−
|}
 
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 +
 +
* '''RCO number''': The "logical" number (1-500) of the [[RCO]]. This number is used as parameter in the [[RCO - Set Remote Control Output|RCO command]].
 +
* '''Description''': Any descriptive text may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only.
 +
----
 +
* '''RCO Type''' = '''Device''': The output is from the AlphaCom (i.e. [[ASLT]] or [[ATLB-12]] board) or [[RIO|RIO unit]]
 +
** '''Device''':
 +
*** '''65''' = AlphaCom
 +
*** '''1-64''' = RIO unit adress
 +
** '''Pin number''':
 +
*** '''AlphaCom''': Pin 1 - 552. The line card ([[ASLT]] or [[ATLB-12]]) in board position 1 has pin 1-6, board position 2 has pin 7-12 and so on.
 +
*** '''RIO unit''': Pin 1 - 8 
 +
----
 +
* '''RCO Type''' = '''Station''': The output is from [[:Category:Stations#Turbine_stations|Turbine device]], [[:Category:Stations#INCA_stations|INCA IP Station]], [[IP-LCM|IP-LCM Module]], [[:Category:Public Address - Network amplifiers|ENA amplifier]] or [[IPARIO|IPARIO unit]]
 +
** '''Station''': The [[physical number]]
 +
** '''Pin number''':
 +
*** '''Turbine Compact''': Pin 1 - 7 (the relay is pin 7)
 +
*** '''Turbine Extended''': Pin 1 - 10 (the relays are pin 7-8, extra relay via [[TA-10|TA-10 unit]] is pin 9-10)
 +
*** '''INCA IP Station''': Pin 1 - 2 (the relay is pin 1)
 +
*** '''IP-LCM Module''': Pin 1 - 7 (the TKIS relay is pin 7). Pin 17-24 are the IP-LCM relays 1 to 8
 +
*** '''ENA Amplifier''': Pin 1 - 6
 +
*** '''IPARIO unit''': Pin 1 - 8
 +
 +
<br>
  
 
==Devices ==
 
==Devices ==
−
[[Image:Devices.png|thumb|300px| The Exchange & System > Devices window]]
+
[[Image:AlphaPro Devices window.PNG|thumb|500px|left|The Exchange & System > Devices window]]
−
{|border="1"
+
<br style ="clear:both;" />
−
|Device Number||Reflects the choice highlighted in the listbox to the left.
+
* '''Device Number''': The [[device|device number]] is a unique address identifying the device (e.g. [[RIO]], [[AlphaVision]]). The device number is a number between 1 - 64.
 +
* '''Description''': Any descriptive text may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only.
 +
* '''Device Type''': There are five options:
 +
** '''Invalid device''': Default. No valid device connected.
 +
** '''Unknown device''': External computer with unspesific functionality. Can be used for any type of device using the AlphaCom Data Protocol ACDP
 +
** '''RIO''':  Used by the [[RIO|RIO unit]]
 +
** '''Control Handler''': PC with call queuing features
 +
** '''Operator (passive)''': Passive device, for [[Stentofon Simple Link Layer|Simple Link Layer]] terminal. [[AlphaVision]] uses this device type
 +
* '''Data [ACDP Link]''': The ACDP (AlphaCom Data Protocol) link used for communication with the device. The actual ACDP link is configured in the [[Exchange_%26_System_%28AlphaPro%29#Serial_Ports|Serial Ports setup]].
 +
 
 +
<br>
 +
 
 +
==NetRouting==
 +
'''NetRouting''' is used to define the data and audio routing between AlphaCom servers ([[AlphaNet]]), and from an AlphaCom server to a [[SIP_trunk_node_-_configuration#AlphaPro_Configuration|SIP Trunk node]].<br>
 +
Between AlphaCom servers one have to define the NetRouting in both directions. For SIP Trunking it is sufficient to define NetRouting from AlphaCom server to the SIP Trunk node.
  
−
|-valign="top"
+
{{note|Configuration of NetRouting for AlphaNet requires [[AlphaPro_-_Installation#AlphaPro_modes_of_operation|AlphaPro Professional]] (the USB hardware dongle must be present in the PC) }}
−
|Description||Here you enter the device name, max. 22 - 36 characters. The name is used in the listbox to the left. The information is not transferred to the exchange, but stored in the PC file.
+
How to configure the NetRouting:
 +
# From the AlphaPro main window, select '''Exchange & System'''
 +
# Select the '''Source''' exchange from the list box to the left
 +
# Select '''NetRouting'''
 +
# Press '''Insert'''
 +
# Select the '''Destination''' exchange from the list of exchanges that appeares
 +
# Fill in '''Data''' and '''Audio''' routing under "Primary Route" as described below
 +
<br>
 +
[[Image:NetRouting Steps.png|thumb|600px|left|NetRouting configuration]]
 +
<br style ="clear:both;" />
  
−
|-valign="top"
+
'''Source'''
−
|Device Type||There are five options:
+
* '''Source''': The source node for the route
−
*Invalid device (default), no valid device connected.  
+
* '''Description''': Filled in by the system. The text is taken from the "Description" field in Exchange & System > System
−
*Unknown device (can be used for any type of device using the AlphaCom Data Protocol ACDP)
 
−
*RIO
 
−
*Control Handler
 
−
*Operator (passive)
 
  
−
|-valign="top"
+
'''Destination'''
−
|Data [ACDP Link]:||Lists the serial ports numbers with the default drivers for the ports. Overview of the serial ports settings - see page 187.
+
* '''Destination''': The final destination node for the route
−
|}
+
* '''Description''': Filled in by the system. The text is taken from the "Description" field in Exchange & System > System
 +
 
 +
'''Primary Route'''
 +
* '''Data - ACDP Link''': Select the link type used for the connection:
 +
** '''Data over IP''': For routing to another AlphaCom server over IP ([[AlphaNet]])
 +
** '''SIP Link''': For routing to a [[SIP_trunk_node_-_configuration#AlphaPro_Configuration|SIP Trunk node]]
 +
** '''ACDP Link 1-7''': For routing to an AlphaCom server using serial (RS232) link
 +
** '''RMD Link''': Used when interfacing to a [[RingMaster CB901|RingMaster CB901 system]]
 +
** '''M100 Link''': Used when interfacing to a [[Philips M100|M100 intercom system]]
 +
*'''Data - Node Number''': Data connection and signaling will be sent to the node specified here. Normally this is the destination node
 +
** There is an option to send data signaling in transit via another node. Then enter the node number of the transit node here
 +
* '''Audio - Node Number''': Audio will be sent to the node specified here. Normally this is the destination node
 +
** There is an option to send audio in transit via another node. Then enter the node number of the transit node here
 +
** Data and Audio doesn't have to be sent to the same node
 +
* '''Audio on IP''': When checked, the audio is sent as VoIP over the IP network. Uncheck when using analog lines ([[AGA|AGA board]]) or E1/T1 trunk ([[AE1|AE1 board]]) for audio
 +
 
 +
'''Alternative Route'''<br>
 +
As an option it is possible to specify an Alternative Route in case the data connection on the Primary Route fails. Typically the primary route is configured to use an IP network on Ethernet Port 0, while the alternative route is configured to use a different IP network on Ethernet Port 1. It is also possible that one route is using ethernet, while the other route is using serial link and [[AGA]] or [[AE1]] board.
 +
 
 +
Alternative Routing can also be used for SIP Trunking when there is a need for [[SIP_trunk_node_-_configuration#Failover_to_redundant_SIP_server|Failover to redundant SIP Server if the primary SIP server]] fails.
 +
 
 +
The configuration options are the same as for Primary Route:
 +
* '''Data - ACDP Link''': Select the link type used for the connection
 +
* '''Data - Node Number''': Data connection and signaling will be sent to the node specified here. Normally this is the destination node
 +
* '''Audio - Node Number''': Audio will be sent to the node specified here. Normally this is the destination node
 +
* '''Audio on IP''': When checked, the audio is sent as VoIP over the IP network. Uncheck when using analog lines ([[AGA|AGA board]]) or E1/T1 trunk ([[AE1|AE1 board]]) for audio
 +
<br>
 +
 
 +
=== General and Advanced Settings ===
 +
When configuring the NetRouting, there are some additional options available.
 +
====General Settings tab====
 +
 
 +
[[Image:NetRouting General.png|thumb|500px|left|'''General Settings''' in the NetRouting window]]
 +
<br style ="clear:both;" />
 +
 
 +
* '''Preferred codec''': Available options are: ''Best Available'', ''G711u'', ''G711a'' and ''G722''.
 +
** When creating NetRouting to an AlphaCom node (AlphaNet), "Best Available" is default. Normally you should not change this setting.
 +
** When creating NetRouting to a SIP Trunk node, AlphaPro will import the codec setting from the [[SIP_trunk_node_-_configuration#Create_a_SIP_Trunk_Node|SIP Trunk Node configuration]]. It is possible to override that configuration here. Set codec according to what is supported by the SIP Server.
 +
* '''RTP Packet Size''':
 +
** When creating NetRouting to an AlphaCom node (AlphaNet), "20ms" is default. Normally you should not change this setting.
 +
** When creating NetRouting to a SIP Trunk node, AlphaPro will import the RTP Packet Size from the [[SIP_trunk_node_-_configuration#Create_a_SIP_Trunk_Node|SIP Trunk Node configuration]]. It is possible to override that setting here.
 +
* '''Billing Node''': AlphaCom has an embedded [[Billing|Billing Software module]] for access control and charging of external phone calls. When Billing is being used in an AlphaNet system, you need to choose by this setting in which node the Billing Module is running. Data about the external phone call will then be forwarded to this node for further processing.
 +
* '''Recording''': Each link has 2 audio recording flags associated with it, for incoming and outgoing calls. By default, both these flags are enabled. For the recording of AlphaNet calls, the rule is:
 +
** Record incoming call if the '''Incoming''' flags for both the station AND the source node are enabled
 +
** Record outgoing call if the '''Outgoing''' flags for both the station AND the destination node are enabled
 +
::This makes it possible to select the side on which to record an AlphaNet call, or to have the option to record the call at both ends.
 +
* '''IP Only''': Set this flag if the Destination Node (B-node) is an AlphaCom XE1 ("IP Only") or ICX-AlphaCom, and the Source Node (A-node) is an AlphaCom XE7, XE20 or XE26 with analog stations. The flag will force duplex voice switching to take place in the Source Node where ASLT or ATLB-12 cards are present for the handling of the voice switching, which is required when analog stations are involved in a call. The flag will override the default behavior, which is to perform the voice switching in the Destination Node.
 +
 
 +
: It is '''''not''''' necessary to enable the "IP Only" flag when:
 +
:* Both nodes are AlphaCom XE1 or ICX-AlphaCom
 +
:* Both nodes are AlphaCom XE7/20/26 (with ASLT cards)
 +
* '''Monitor SIP Trunk [SIP Trunk only]''': When enabled, the AlphaCom will send the SIP message OPTIONS to the SIP server every 5 seconds, and expects a response in due time, else the link is reported down. The event [[AlphaNet Link (Event Type)|29 - AlphaNet Link]] is triggered when the communication with a SIP server goes up or down. See [[SIP_trunk_node_-_configuration#Monitoring a SIP Trunk|Monitoring a SIP Trunk]] for more details. The monitoring can also be used for [[SIP_trunk_node_-_configuration#Failover_to_redundant_SIP_server|Alternative Routing to Redundant SIP server]].
 +
* '''Exigo Node [SIP Trunk only]''': Enable this flag if the SIP Trunk is used towards an Exigo PA system. In an AlphaCom - Exigo integration this flag will ensure a quicker (max 15 seconds) switchover of audio from A- to B-system in case the A-controller fails.
 +
: When simultaneous AlphaNet setup from A and B Exigo Controllers, the overlapping B setup (Group Call or Audio Program to group) will be set in "Camp On" mode as long as A is active. If A fails, then B will continue to play. This assumes that Exigo A and B node is configured as odd/even-numbers according to rules found on ExigoWiki.
 +
* '''On incoming calls in private mode: Reply 180 RINGING [SIP Trunk only]''': By default the AlphaCom responds with the SIP message 200 OK on an incoming call to a station in [[private mode]], and an audio connection is immediately established. When enabling this flag, the AlphaCom will instead first respond with 180 RINGING. When the called party answers the call,  the audio connection will be established and the message 200 OK will be sent.
 +
 
 +
<br>
  
 +
====Advanced Settings tab ====
 +
[[Image:NetRouting Advanced.png|thumb|500px|left|'''AdvancedSettings''' in the NetRouting window]]
 
<br style ="clear:both;" />
 
<br style ="clear:both;" />
  
−
==NetRouting==
+
* '''Duplex switching''': These settings are applicable only when analog [[ASLT]] stations or [[ATLB-12]] telephones are involved in an AlphaNet call. By default the duplex voice switching takes place in the destination node (B-node). Default behavior can be modified by these settings. 
−
[[Image:Net Routing.png||thumb||400px| The Exchange & System > NetRouting window]]
+
** '''Avoid Duplex in Start Node''': Inhibit use of duplex voice switching in the source node on AlphaNet calls to this destination node. This will force duplex switching in destination node also for IP-MultiModule and IP AlphaNet calls to traditional AMC ver. 8 or 9 systems.
−
{|border="1"
+
** '''Avoid Duplex in Transit Node''': This flag is used in mixed AlphaNet systems where there is a combination of AlphaNet over IP, and traditional analog (AGA/AE1) AlphaNet, and the end node is running AMC ver. 8 or 9. The flag must be set in the transit node where both the AlphaNet IP and AGA/AE1 are connected. The purpose is to force duplex to run in the transit exchange to avoid echo, as end nodes running AMC 8/9 do not handle delays on the audio link. (AlphaPro text says "Avoid Duplex in Transit Node", the correct is "Force Duplex in Transit Node")
−
!colspan="2"|Source
+
** '''Force Duplex in Start Node''': Force use of duplex voice switching in the source node (A-node) on AlphaNet calls to this destination node (B-node) for all node types. If [[AGA]]/[[AE1]] is used, this flag will only work if source node number is lower than the destination node number. "Force Duplex in Start Node" is default behavior when calling to a SIP Trunk node, RM node or M100 node. Compared to the "'''IP Only'''" flag, The "IP Only" assume that all stations in the destination node can do echo cancellation, thus go open duplex when handset is lifted in source node
−
|-valign="top"
+
* '''RTP Delay''': Jitter buffer size. Value 0 = Adaptive jitter buffer (recommended)
−
|Source||Description missing
+
* '''Gain In''': Range from -30dB to +30dB. 0=Use default value. Default value is 0dB gain for AlphaNet, and -6dB for SIP Trunk
−
|-valign="top"
+
* '''Gain Out''': Range from -30dB to +30dB. 0=Use default value. Default value is 0dB gain for AlphaNet, and +9dB for SIP Trunk
−
|Description||Description missing
+
* '''Limit In''': Range from 3 to 36dB. 0=Use default value (= 0dB).
−
|-valign="top"
+
* '''Limit Out''': Range from 3 to 36dB. 0=Use default value (= 0dB).
−
!colspan="2"|Destination
+
{{note|The '''Gain''' and '''Limit''' settings are used only when audio is transcoded. E.g. if an IP Station calls via AlphaNet or out on a SIP Trunk and the station and the trunk are using the same codec, there will be no adjustments of Gain/Limit.}}
−
|-valign="top"
+
* '''Max VoIP Channels''': The number of simultanous calls are limited by the [[Licenses#AlphaNet_license|AlphaNet license]] or the [[Licenses#SIP_trunk_license|SIP Trunking license]]. In addition to this, it is possible to further limit how many VoIP channels a specific AlphaNet link or SIP Trunk should be able to use. This could be useful e.g. if there are multiple SIP trunks, and one might want to set restrictions on [[SIP_trunk_node_-_configuration#Limiting_the_number_of_VoIP_channels_used_by_a_SIP_Trunk|how many VoIP channels one particular trunk]] can use.
−
|Destination||Description missing
+
 
−
|-valign="top"
+
 
−
|Description||Description missing
+
[[Category:AlphaPro - User Guide]]
−
|-valign="top"
 
−
!colspan="2"|Primary Route
 
−
|-valign="top"
 
−
|'''Data''' - ACDP Link||Description missing
 
−
|-valign="top"
 
−
|'''Data''' - Node Number||Description missing
 
−
|-valign="top"
 
−
|'''Audio''' - Node Number||Description missing
 
−
|-valign="top"
 
−
!colspan="2"|Alternative Route||
 
−
|-valign="top"
 
−
|'''Data''' - ACDP Link||Description missing
 
−
|-valign="top"
 
−
|'''Data''' - Node Number||Description missing
 
−
|-valign="top"
 
−
|'''Audio''' - Node Number||Description missing
 
−
|}
 

Latest revision as of 13:04, 3 January 2024

AlphaCom icon 300px.png

From the Exchange & System window you can inspect and modify a large number of system parameters.

Exchange and System - Main window

The Exchange & System window
  • Exchange name: The name was choosen when the database was created. Can be edited from the "System" window.
  • Description: Additional description may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only. Can be edited from the "System" window.
  • Node: 1 - 254. Default node number is 1. The node number is used for communication between AlphaCom servers in AlphaNet. The node number was choosen when the database was created. Can be modified from the "System" window.
  • Exchange Database (In earlier AlphaPro versions: "AlphaNet - Adm. here"):
    • Enabled: The exchange was created with full database.
    • Disabled: The exchange was created without database. Used if there is a need to create routing to a remote AlphaCom server without having full database in this AlphaPro.
  • Cluster Node: Cluster programming is an option to simplify programming and updating of numbers in AlphaNet when operating with integrated number series. Nodes with the same Cluster Node Number (1-255) are members of the same cluster.
  • Database Version: The FoxPro database version used by the AlphaPro program. The information is automatically entered.
  • Node Type: Reflects the choice you made when you created the exchange. It is possible to change node type in the "System" window.
  • Language: Reflects the language choosen for display texts in stations when the database was created. Once the database is created, the langauge cannot be changed from AlphaPro.
  • DMP File Id: The name of the dmp file is DMP_x.DMP, where x is the DMP File Id.
  • AlphaCom IP Address: Shows which IP Address the AlphaPro program will try to connect to when establishing communication with the AlphaCom server
  • MultiModule 1st/2nd/3rd Slave IP: Shows the IP address of the slave module(s) when MultiModule is used. If the Node Type is set to AlphaCom (and not AlphaCom XE) it will change slightly, and instead show which modules are enabled.
  • Comments field: Additional comments may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only. Can be edited from the "System" window.



System

General

The Exchange & System > System > General window


  • Exchange name: The name was choosen when the database was created. Can be edited from the "System" window.
  • Description: Additional description may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only. Can be edited from the "System" window.
  • Node: 1 - 254. Default node number is 1. The node number is used for communication between AlphaCom servers in AlphaNet. The node number was choosen when the database was created. Can be modified from the "System" window.
  • Cluster Node: Cluster programming is an option to simplify programming and updating of numbers in AlphaNet when operating with integrated number series. Nodes with the same Cluster Node Number (1-255) are members of the same cluster.
  • Node Type: Reflects the choice you made when you created the exchange. It is possible to change node type in the "System" window.
  • Exchange Database (In earlier AlphaPro versions: "AlphaNet - Adm. here"):
    • Enabled: The exchange was created with full database.
    • Disabled: The exchange was created without database. Used if there is a need to create routing to a remote AlphaCom server without having full database in this AlphaPro. The remote AlphaCom must then be configured from a different AlphaPro PC.
  • Language: Reflects the language choosen for display texts in stations when the database was created. Once the database is created, the langauge cannot be changed from AlphaPro.
  • DMP File Id: The name of the dmp file is DMP_x.DMP, where x is the DMP File Id.
  • Database Version: The FoxPro database version used by the AlphaPro program. The information is automatically entered.
  • AlphaCom IP Addresses:
    • Connect to: Specifies which IP address the AlphaPro PC should connected to when establishing communication with the AlphaCom
    • Eth0: The IP address of ethernet port 0 of the AlphaCom (Default 169.254.1.5)
    • Eth1: The IP address of ethernet port 1 of the AlphaCom (Default 0.0.0.0)
    • AlphaNet: Enable this flag if the ethernet port is used for AlphaNet communication. When enabled the ethernet port will show up as a choice in the NetRouting window.
Note icon The AlphaCom IP addresses are configured from AlphaWeb, not from AlphaPro.


  • Username: The username needed to log in to the AlphaCom (Default admin)
  • Password: The password needed to login to the AlphaCom (Default alphaadmin)
  • Show Password: Check this box to view and confirm that the correct password is entered.
Note icon If no username and password is written here, AlphaPro will ask for credentials each time communication is established with the AlphaCom


  • MultiModule 1st/2nd/3rd Slave IP: Configure the IP address of the slave module(s) when MultiModule is used.
  • Comments field: Additional comments may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only. Can be edited from the "System" window.



Calls and Options

The Exchange & System > System > Calls and Options window


System Options

  • Duplex: Ignore High Frequency: Applicable to analog ASLT stations only. The high frequency evaluation in the duplex algorithm can be switched off by setting this flag. This may be useful in surroundings with high frequeny noise from fans or aircondition, as the high frequecies might influence on the duplex voice switching.
  • Autonom Mode: Copy NVRAM: Applicable to MultiModule system only. The configuration of the Master AMC-IP board will be copied in the background to the slave AMC-IP boards. The slave modules will then be able to run in autonomy mode in case of communication failure with the master module. The copy process takes approx. 38 hours.
  • User SWAP Mode. The options are:
    • Swap phys.nos: After the swap Dir.no A calls Station B, Dir.no B calls Station A
    • Copy users, names, dir.nos: After the swap Dir.no A calls Station B, Dir.no B calls Station A
    • Copy users, names, NOT dir.nos: After the swap Dir.no A calls Station A, Dir.no B calls Station B
  • Work Channel LED indication: When using the "Work Channel" option in the MultiConference feature, you can choose LED indication in the DAK key assigned as the current "Work Channel"


Flags

  • Group Hunt Rotate: The Group hunt can be programmed either to:
    • Enabled (default): Rotating order - start on the next physical number in the group in relation to the previous connection
    • Disabled: Fixed start - always start at the lowest free physical number in the group
  • Simultaneous Group Calls:
    • Enabled (default): Several group calls might be active at the same time if there are no overlapping members. When several group calls are active simultanously, a group call can only be answered from a station belonging to the group. Note that the "gong" is a common resource for all groups and can only be used by one group at the time.
    • Disabled: It is not possible to have more than one active group call in the system at a time.
  • No Group Calls In Conversation:
    • Enabled: No group call audio will be played in the station if it is active in a conversation.
    • Disabled (default): Group call audio will be mixed with the conversation audio.
  • Mute Program During Group Call:
    • Enabled: Audio Program will be muted while a group call is being played
    • Disabled (default): Audio Program will be mixed with the group call audio
  • Ignore Station Down In Conversation: The system is designed such that if a station is reported faulty while in conversation, the conversation will be cancelled. With this flag enabled, the system will ignore station faulty reports for stations in conversation. This might resolve a problem experienced with some old analog ASLT substations that automatically cancels the call immediately after the call is connected. This flag is applicable to analog ASLT stations only.
  • Ringing Group in Global mode:
    • Enabled (default): The activation of a ringing group call is sent as broadcast to all nodes in AlphaNet. This implies that the same local Ringing Group number is activated in all nodes. See Ringing Group Feature in AlphaNet
    • Disabled: The activation of a ringing group call will ring to the local ringing group in own node only


Wake Up Call

  • Duration: Duration of private ringing for Wake-up Calls
  • Repetition: Number of times the Wake-up Call is repeated if not acknowledged
  • Interval: The time between repetitions


Hotline

  • Hotline Call Delay: The time from the handset is lifted till the hotline number is dialed. During this time it is possible to use the keypad for ordinary dialing. If all telephones/stations with the hotline option are going to be used for hotline dialing only, set the delay to 0. Default time = 5.0 sec. The Hot-Line feature must be enabled per station in the Users & Stations > Station Type window.


Priority Mail" Queue Indication

  • Minimum Priority Level: This value is linked to the events Priority Mail Present and Priority Mail in Idle, and sets the minimum priority level required to trigger these events. By default these events are triggered by mails or call requests with priority 100 or higher.
  • Private ring mail priority: When receiving Mail or Call Request with this priority or higher, the receiving station will be alerted by a private ringing tone. Default priority level is 150 or higher. Also ATLB subscribers (telephones) can receive this type of Call Requests, as the telephone will start to ring when a call is received.


Call Forwarding

  • Ringing Count: When Call Forwarding is activated on a station, this parameter sets the number of ringing signals to be played in the station before the call is forwarded. When set to 0 the call will be forwarded immediately, without any ringing signal heard in the station.


Urgent Feature Reminder


Conversation Timeout

  • Enable: By default converations are cancelled after 1 hour 49 minutes. Uncheck this flag if conversation timeout is not wanted. The timeout is applicable to point to point calls and Duplex conference calls. Simplex conference or Group Calls are not affected by this timer.
  • Timeout: The conversation timeout can be modified. Max. time is 6540,0 seconds (1 hour 49 minutes)


Call Requests

  • Delete Mail Filter: If the Delete Mail Filter is set different from "0", all mails or call requests with priority levels ending with this value (e.g. 3, 13, 23, 33, 43, etc.) can not be deleted from the station (i.e. dialing 7630 or 70+0), or by the $DELM data protocol command. If Delete Mail Filter = 10 then the filter is done on priority levels ending with 0. Mails will be deleted when successfully calling back to the sender, or when using the data command $CANM. Delete Mail Filter = 0 means all mails can be deleted.
  • Cancel Mail on Call Back Threshold: Mails with priority higher than the set value will not be deleted when calling back. The mail/call request will remain in the queue. Can be used in combination with the Delete Mail Filter to prevent cancellation of call requests on the receiving station. Mails can be deleted by the data command $CANM.



Logs and Errors

The Exchange & System > System > Logs and Errors window


System Log It is possible to filter away certain error reportings to the System log

  • Line Error: Station errors, both analog ASLT stations and IP Stations. (Station errors will still be reported via Event 13 - Faulty Station Line, and to Supervisor station defined in "Faulty Line" in Faults menu).
  • Board Error: Errors on feature boards (ASLT, ATLB-12, AGA, ASVP) detected by the AMC-IP
  • Device/CardCage Error: Includes the following devices:
  • Software Reports: Some messages during start-up and normal operation
  • RCI ON/OFF: RCI inputs located on the AlphaCom server or on a RIO unit


Line Monitoring

  • Extended Wire Check: Applicable to analog ASLT stations only. Check for break in c- or d-wire even if ab-wires are OK. When a station is tested the LED will flash for a short period. A break in c/d-wire will be detected within approx. 1.5 to 6 minutes, depending on the number of stations connected to the system. Stations are tested one by one in a rotating fashing. The test uses 0.5 sec per station connected and 0.1 sec per station not connected. After having tested the last station in the loop there is a 23 second delay before the test starts again from the beginning.
  • Enable Tone Test: Activate the periodic Tone Test. The manual tone test can be activated independent of periodic tone test.
    • Start time, Tone Test: Enter the time (24-hour notation) when the tone test should start
    • End Time, Tone Test: Enter the time (24-hour notation) when the tone test should stop. If start and stop time are set to 0, the tone test runs continuously.
  • OffHook Too Long: Applicable to all types of stations (analog ASLT stations, ATLB phones and IP Stations). A station error is reported if the handset is off for more than the time specified here (default 1 hour), and no dialling takes place. OffHook error will also be reported on analog ASLT stations without display electronics if there is a break in the a- or b-wire.
  • AlphaNet Audio Test Period: Interval between tone test of each AlphaNet audio line. Applicable only when AlphaCom servers are interconnected using AGA or AE1 boards, not when interconnecting servers using IP network. Value 65535 will disable the test. Disabling may be necessary in installations with multiplexes with echo cancellation or heavy voice compression, where the tone test may fail and cause an AlphaNet line error.


System Log and Error Reports to

  • Node 1: and Device 1:: When an AlphaCom server generates an error message, it can be sent to one or two destinations. Enter the node and device number to which System log events should be sent. Default value is 0 + 0, which means report to own log port. Example: 4 + 65 means forward system log events to node 4. Messages forwarded by this programming are STATUS_REPORT and LOG STRING.
  • Node 2: + Device 2:: Forward System Log reports to remote node and device. Default value is 0 + 0, which means report to own log port. Example: 4 + 65 means forward system log events to node 4.
  • Broadcast event messages to remote node: ACDP broadcast messages will be forwarded to the specified node. Useful for Call Handler applications like AlphaVision used in AlphaNet, which relies on status information received from each individual AlphaCom exchange.



Timers

The Exchange & System > System > Timers window


  • Voice paging answer wait time: Answer time after a Group Call or All Call. The group call originator can choose not to cancel after the announcement, but wait for somebody to dial the answer code (default 99).
  • Voice Paging Message Wait Time: Time from a Group Call or All Call is made till the M-key must be pressed.
  • Call Request/Busy Notify Display Time: The time a Call Request Message or a Busy Notify Message is displayed at the receiving station.
Note icon About the Call Request/Busy Notify Display Time timer:
  • This timer also determines how long an ongoing conversation will be interrupted (audio cut) by a new Call Request or Busy Notify message.
  • If an operator finds it annoying that incoming Call Requests are cutting the audio in an ongoing conversation, this timer can be reduced to a lower value, e.g. "1".
  • By setting the timer to "0", notification of new Call Requests is disabled. There will be no audio interruption at all of an ongoing call, but also no display indication that there are new call requests coming in.


  • Call Request Reminder Time: Sets the timeout for the ringing for stations that have made a Call Request, or initiated a call to a Ringing Group
Note icon About the Call Request Reminder Time timer:
  • If the ringing times out after a Call Request, the call will still remain in the call queue of the receiving station(s)
  • If the ringing times out after calling a Ringing Group, the call will be removed from the receiving station(s)


  • Camp On Busy Time: When calling a busy station or a feature, you can wait (not cancel the call) and get automatically connected if the busy station or feature becomes free within this preset time (default 30 seconds).
  • Private Call Time: Sets the timeout for the ringing for calls in Private Ringing mode.
  • Auto Search Time: A call in private ringing mode will be transferred to the "Search list" of the called station after this time (default 11 seconds). The Automatic Search feature has to be enabled.
  • RCO (Door Open) Pulse Time: The event types Door Opening during connection and Automatic lock are using this timer. When these events are triggered, the event is reported ON, and then OFF 3.5 sec (default) later. This is typically used to trigger and RCO/relay to generate a pulse for door opening. The pulse time can then be modified by this timer.
  • Call Request search string Timeout: An unattended Call Request will be transferred to the "Search list" of the called station after this time (default 20 seconds). The Automatic Search feature has to be enabled.
  • Auto-Attendant Timeout: The Auto-attendant feature provides voice guided menus for handling incoming phone calls. If the caller doesn't press any digits when calling in, the call will automatically be re-routed (default) after the voice message has finished playing. This timer sets the timeout before re-routing.


Fire Alarm

See Fire Alarm interface via ESPA444

The Exchange & System > System > Fire Alarm window


  • AlphaCom ESPA 4.4.4 Address: Link address in the ESPA 4.4.4 protocol for communication for AlphaCom. Is used for communication between AlphaCom server and the Fire Alarm Control Panel. The value is by default set to 50.
  • Fire Panel 4.4.4 Address: Link address in the ESPA 4.4.4 protocol for the fire alarm panel. Is used for communication between AlphaCom server and the Fire Alarm Control Panel. The value is by default set to 49.
  • Supervisor Station: The station receiving the pre-alarm message.
  • Nearest Station: When a prewarning message is displayed at the supervisor station, pressing 8 at the supervisor station sets up a connection to the station closest to the Fire Alarm Control Panel.
  • Pager Driver: The following options are available:
    • Tateco T940SI (Driver 1)
    • Ericsson PSP800 (Driver 2)
    • Stentofon/Multitone RPE 351/651/Mk7 (Driver 3)
  • Fire Team (Group Number): The group of intercom stations receiving the Fire Pre-Alarm and the Fire Alarm messages.


VoIP

The Exchange & System > System > VoIP window


Flags

  • Use VolP Audio for MultiModule: The flag is enabled by default. When enabled, MultiModule calls will use AGA or AE1 for audio distribution between the modules if available. If no (free) AGA/AE1 found, VoIP channel will be used. When the flag is disabled, MutliModule calls will only use AGA or AE1 for audio distribution, VoIP channels will not be used.
  • Optimized voice duplex control when conversation with SIP trunk/station: When an analog ASLT station in a noisy environment is calling a SIP phone there can be issues with the automatic voice switching (duplex) due to the echo cancelling in the SIP phone. When this flag is set, the initial voice direction is forced to be from the intercom station towards the SIP phone. When the phone operator starts to speak, the voice direction will switch towards the intercom station, regardless of the level of the audio signal from the intercom station. As soon as the phone operator stops speaking, the voice direction will switch back to the initial direction.
  • Incoming calls from SIP in Private Ringing mode: When enabled, incoming SIP trunk calls will be forced in private ringing mode, regardless of the private/open setting of the intercom station.
  • Use UK style Ringing Tone on Ringing Group Calls from SIP: When enabled, SIP trunk calls to a Ringing Group will be using a dedicated ringing tone. This is to distinguish external phone calls from internal calls.
  • Use UK style Ringing Tone on Private Calls from SIP: When enabled, SIP trunk calls to a station in Private mode will be using a dedicated ringing tone. This is to distinguish external phone calls from internal calls.
    • For the two options above, one can choose between different tone types:
      • 500 Hz Tone
      • 400 Hz Tone (Default)
      • Private Ring Tone
      • Attention Tone (muted)
      • Attention Tone
      • Busy Tone (muted)
      • Busy Tone
      • Dial Tone
When disabled, regular Private Ringing tone will be used.
  • Allow SIP Stations in Group Calls and as default speaker in SX Conference: (AlphaCom 12.3.3.1 or later) When the flag is enabled, SIP users can be included in "group" operations:
    • Include SIP Stations or SIP Trunk Stations in group calls. The SIP phone must have AutoAnswer enabled. The system will wait for 3 seconds for a "SIP OK" response from the SIP phone. If no such response, the group call will carry on anyway. Maximum SIP users in a group call: 200 SIP users in ICX system, 50 SIP users in an AlphaCom system.
    • A SIP user can be configured as a Default Speaker in a Simplex Conference. The SIP user must have AutoAnswer enabled. Use case: The SIP user is a conference circuit in a remote iPBX, in this way one can combine the conference of the iPBX with the simplex conference of the AlphaCom.
    • SIP Stations (max 50) may receive Voice Alarm Messages. That is messages triggered by e.g. 761 code, $GM, AMG, AMS or $ALRM
    • Make sure the Codec in the Group or Simplex Conference settings match the codec used by the SIP phone, or it might giver error code 488 Not Acceptable Here in the SIP trace.

Timers

  • Max VolP round Trip Delay allowed for open duplex during handset conversation in AlphaNet: Applicable only for AlphaNet conversations involving analog ASLT stations using handset. This setting is used if there are more than 12 simultaneous handset calls (i.e. all LEC resources in the AMC-IP are in use).
    • AlphaNet calls: The roundtrip delay on a VoIP AlphaNet conversation is measured by the AlphaCom. If the delay is more than the value specified in this parameter, a handset to handset conversation will be forced in voice switched duplex. This is to prevent echo in the handset due to crosstalk in AlphaCom handset (and no echo cancelling).
    • SIP calls: When talking with handset conversation between Intergard station and SIP station the SIP station will get echo in the handset due to crosstalk in AlphaCom handset (and no echo cancelling). Due to this handset to handset communication will be forced in duplex. (Default delay setting for SIP = 30ms. Full duplex can be obtained if this parameter is adjusted to 40 ms or more)
  • SIP digit collection timeout: Specifies how long the AlphaCom should wait for more digits before setting up the connection to a SIP device. The timeout is used for "Enbloc dialing", i.e. by feature 81 and feature 83 when the parameter 2 field is used. See also SIP Trunk - access numbers
  • SIP Dial Delay: This setting is applicable to "Overlap dialing" on SIP trunk. After a connection on the SIP trunk is established (i.e. SIP 200 OK is received), the sending of succeeding digits is delayed by the time specified by this timer.

Group Calls, Audio Programs to IP stations

  • Multicast Base Address: By default this field is empty (0.0.0.0), and usually this default value can be used. When empty the multicast address 239.192.NN.0 will be used, where NN is the AlphaCom node number. The Multicast Base Address needs to be changed only if there is a conflict with other multicasting applications on the same net. If you enter a new Multicast Base Address, this address and up to 31 subsequent addresses will be used. The multicast addresses are used for group call, program conference and audio program to IP stations. See Multicast_in_AlphaCom for more details.
  • Default rule: Determine how Group Audio is transmitted to IP stations. The default rule is a two-way choice:
    • Multiplied unicast (default) - Audio is distributed by setting up one unicast connection to each of the stations in the group
    • Multicast - Audio is distributed by sending the VoIP audio to a multicast address
This rule applies to all IP stations which do not match any of the subnet rules 1 - 5.
  • Subnet rule 1-5: Up to 5 Subnet Rules can be defined to make exceptions from the "Default rule". A Subnet Rule applies to IP stations with IP addresses within a given range. The IP address range for the rule is defined using the IP-address + subnet-mask scheme familiar from IP routing tables, see http://en.wikipedia.org/wiki/Subnetwork. A dropdown list with three alternatives tell how each of the 5 subnets are handled:
    • Relayed multicast - the subnet forms a Relay Group
    • Multiplied unicast
    • Multicast
After changing the Subnet Rules, AlphaCom has to be reset.
When a station registers with the AlphaCom, AlphaCom checks the 5 rules in turn to find a address match. The search stops when the first match is found. This means that it is possible to specify a rule with a narrow address range, followed by a different rule for a address range which is superset of the first rule. Stations which do not match rule 1, but rule 2 will use rule 2.


Recording

This window is used to configure audio recording. The audio recording is taking place on an external computer. AlphaCom communicates with the recorder using the SIP protocol. For more information, see the Recording category

The Exchange & System > System > Recording window


  • Username:
    • Primary Recorder: Enter the registration name of the recorder in the Username field for the Primary Recorder
    • Secondary Recorder: If there is a redundant recorder as well, enter its registration name in the Username field for the Secondary Recorder
  • Redundant recording:
    • As from ICX-AlphaCom 1.1.3.0, AlphaCom will record on both defined recorders in parallel
    • For all other ICX-AlphaCom and AlphaCom software versions: AlphaCom will first attempt to record a conversation on the Primary Recorder but if that recorder is not available, the Secondary Recorder will be used.
  • IP Address:
    • Primary Recorder: Leave this field blank when using STENTOFON recording software. Only used when required by 3rd party recording software
    • Secondary Recorder: Leave this field blank when using STENTOFON recording software. Only used when required by 3rd party recording software
  • Force Mono Recording: Only used when required by 3rd party recording software. When enabled there will be a single SIP connection and RTP stream from the AlphaCom to the recorder. The RTP stream will contain audio from both parties in a conversation. When using STENTOFON recording software this flag should be disabled, causing two SIP connections and RTP streams from the AlphaCom to the recorder, allowing the user to listen to one or the other party in a conversation.
  • Recording on demand: When the "Recording On Demand" is enabled, no recording will be activated in the system by default. All recording must be started with the $REC command.
  • Codecs
    • All: Enable (default) when all codecs are supported by the recording software (default for STENTOFON recording software). Disable only when required by 3rd party recording software to specify certain codecs.


UDP Text

UDP Groups are used by the Event Handler to give common properties to a group of stations. Each UDP Group can be assigned a text to describe what the UDP Group is used for. This text will also appear in the Event Handler when refering to the UDP Group.

The Exchange & System > UDP Text window
Note icon The UDP Text is not transferred to the AlphaCom server. It is stored locally on the PC only.



RCI

Inputs

The Input window is used for configuration of inputs connected to AlphaCom XE servers, IPARIO units, RIO units and ENA Amplifiers.

Note icon Inputs on Turbine and INCA stations must be configured via the Event Handler, see Input from IP Stations


The Exchange & System > RCI > Inputs window


  • Description: Any text describing the usage of the input. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only.
  • RCI Type:
    • Device: Use "Device" when the input is physically connected to an AlphaCom server or a RIO unit
      • Device Number:
        • 1 - 64 = External RIO unit. The device number is set by switch settings on the RIO board
        • 65 = AlphaCom server
        • 66 - 68 = AlphaCom Slave modules in a MultiModule system
    • Station: Use "Station" when the input is physically connected to an IPARIO unit or an ENA Amplifier
  • ON Action: Enter the action command to take place when the RCI input is turned on. It is possible to have several commands separated by semicolons <;>. Maximum 40 characters. If this is not sufficient the data command $ER can be used to trigger an event in the event handler, and the actual commands can be executed there.
  • OFF Action: Enter the action command to take place when the RCI input is turned off. It is possible to have several commands separated by semicolons <;>.
  • On When Closed: Generate alarm on closed or open contact
    • Checked (default): Normal Open (NO) contact. The ON Action is activated when the contact closes, and OFF action when it opens
    • Unchecked: Normal Closed (NC) contact. The ON Action is activated when the contact opens, and OFF action when it closes
  • Delay Before ON Action: The time from the RCI is activated to the action is carried out. If the RCI in the waiting time is deactivated, the action is not carried out. Value is shown in 100 msec units. Maximum value 65 000 = 1 hour 48 minutes. This can be used for two purposes:
    • Stabilizing of the line, to debounce any unwanted signals.
    • Delayed call/alarm. For example, used with an alarm button in a lift. The button will have to be pressed down for a certain time to activate the alarm signal. Thus an unintended short press will be ignored.
  • Activate Faulty Module LED: When enabled the Status LED in front of the AlphaCom XE20/XE26 will turn red when the RCI is activated (ON), and will go green when the RCI goes to OFF. Use case: Connect the Fault relay from the Power Supplies to an RCI input to indicate with the status LED if there is a power supply error.


Faults

Fault reports, such as station errors, are by default sent to station on physical number 1. In this window you can change the receiver of such error reports, or you can remove the reporting.

The Exchange & System > RCI > Faults window


Fault cases:

  • Faulty Line: Triggered when there is a station error. All types of stations (IP Stations, SIP phones, analog ASLT stations and ATLB-12 phones) are monitored and reported
  • Faulty Board: Triggered if there is an error on one of the AlphaCom feature boards ASLT, ATLB-12, AGA or ASVP.
  • Faulty Device: Triggered if there is communication error between AlphaCom and a RIO unit, or between AlphaCom Master Module and a Slave Module in a MultiModule system
  • Faulty AGA Line: Triggered if there is an error on an analog AGA line between AlphaCom servers in AlphaNet or MultiModule
  • Description: Any describing text. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only.
  • ON Action: Enter the action command to take place when the specified fault occurs. It is possible to have several commands separated by semicolons <;>. Maximum 40 characters. If this is not sufficient the data command $ER can be used to trigger an event in the event handler, and the actual commands can be executed there.
    • The default "ON Action" will send the fault reports to station 1.
    • MST 1 0 28 means:
      • MST = Mail to STation
      • 1 = Physical number of station to receive the error report
      • 0 = Filler (always use "0")
      • 28 = Station Line error. Other codes are: 27 = Board error. 29 = Decvice error. 30 = AGA Line error.
    • If the error reports should be sent to another station, simply change the first parameter. MST 23 0 28 will send Station Error reports to station 23.
    • If the error reporting should be removed, simply delete the text in the "ON Action" field.
  • OFF Action: Not in use.
Note icon
  • Errors are reported only when they occur, not when the error is cleared
  • Errors are also reported via the Event Handler. Here they are also reported when the error is cleared


Serial Ports

The Serial Ports/Data Links window lets you configure external communication using TCP/IP or serial link RS232 (or RS422/485).

The Exchange & System > Serial Ports window
Note icon In ICX-500 and ICX-AlphaCom Core the license "1002602400 ILI-IF" is required to enable these ports


OBS icon Any changes in the Serial Ports window will require a reset to take effect!


  • Drivers: Available drivers/protocols are:
    • MPC Data Protocol: The proprietary MPC Data Protocol. Used by some system integrators
    • Tateco: Pocket pager - used for communication with pocket paging system using the ESPA 4.4.4 protocol
    • Ercisson: Pocket pager - used for communication with pocket paging system using the ESPA 4.4.4 protocol
    • Multitone: Pocket pager - used for communication with pocket paging system using the ESPA 4.4.4 protocol
    • System Logging: Obsolete. Was originally used for connection of serial printer/PC for logging of error reports. Logging is now configured via the AlphaCom web interface
    • ACDP Link 1-7 - The proprietary AlphaCom Data Protocol
      • Avaliable Link Types:
        • ISO1745 Point to Point - RIO,PC: Normally used for RS232 communication with the RIO unit.
        • ISO1745 Multidrop - RIO: Normally used for RS485 (bus) communication with the RIO unit.
        • Stentofon Link Layer - AlphaNet. Normally used for RS232 or RS422 communication with another AlphaCom in AlphaNet.
        • Stentofon Multidrop Slave - Reserved. A master/slave protocol for special purposes
        • Stentofon Multidrop Master - Reserved. A master/slave protocol for special purposes. Also used by AlphaVision.
        • Stentofon Simple Link Layer - PC. The Stentofon Simple Link Layer is a point-to-point link layer which can be used as an operator interface. To get response messages back to the port, one must define at least one external device on this port. Enable "Broadcast" if ACDP broadcast messages should be transmitted.
      • Broadcast: Enable "Broadcast" if ACDP broadcast messages should be transmitted.
      • Destination: Any descriptive text. Note that this text is not transferred to the AlphaCom server. It is stored locally in the PC only.
    • Fire Alarm - Used for connection to Fire Alarm Control Panels using the ESPA 4.4.4 protocol
    • Inter Module - Proprietary protocol used for serial RS232 communication between AlphaCom modules in a MultiModule system. Note: Do not enable this port if MultiModule is interconnected via IP.
    • EDIO 1-10:
      • EDO (External Data Output) is a user definable ASCII text protocol intended for CCTV control, making customized logs etc. Up to ten EDO ports can be defined. EDO is controlled from the Event Handler where it can be configured to send free text merged with parameters for the active stations. Ascii control characters can be generated by using character escape codes.
      • EDI (External Data Input) is used to receive ASCII text from external equipment. The input message must have a termination character. Maximum 128 characters. Parsing the content is done in the action string in the Event Handler
        • Start Character (Optional): Enter the ascii descimal value of the start character to indicate the beginning of the string. The hex value of the character will show up next to the entry.
        • Stop Character: (Must): Enter the ascii descimal value of the stop character to use to terminate the input string. The hex value of the character will show up next to the entry. Default value is 10 (= Line feed)
  • Enabled: After enabling a driver/protocol, the AlphaCom have to be restarted for the change to takes effect.
  • Port Type:
    • Serial 0/1: When selecting serial port, additional parameteres become available:
      • Bit Rate: 1200, 2400, 4800, 9600, 19200 or 38400. Parity: None, Even or Odd. Data Bits: 7 or 8. Stop Bits: 1 or 2.
    • TCP/IP Server: When selecting TCP/IP Server, additional parameteres become available:
      • Port: Specify which TCP port number the AlphaCom should listen to. Note that the port number also must be defined in the AlphaCom firewall. From AlphaWeb select System Configuration > Filters.
      • Keep Alive: If there is no activity on a TCP/IP link, the link will time out and will be closed by the server. When "Keep Alive" is enabled, a KeepAlive message will be sent every 5 seconds to keep the link active.
    • TCP/IP Client:
      • IP Address: Enter the IP Address of the remote party in IPv.4 format (e.g. 192.168.0.5)
      • Port: Specify which TCP port number to use for the connection.
      • Keep Alive: If there is no activity on a TCP/IP link, the link will time out and will be closed by the server. When "Keep Alive" is enabled, a KeepAlive message will be sent every 5 seconds to keep the link active.
      • Define when the connection should be established:
        • Connect at AlphaCom startup (default) If the client disconnects, AlphaCom will try to reconnect immediatly.
        • Connect at AlphaCom write
        • Connect at AlphaCom write, disconnect after each write
    • IP-ARIO: The IPARIO can be used as an Ethernet to Serial converter. The RS232 serial port of the IPARIO can be connected to external equipment, and the IPARIO converts the data from serial to IP, and communicates with the AlphaCom using TCP/IP. The communication parameters of the serial port in the IPARIO is configured in AlphaPro. The AlphaCom will forward these parameters to the IPARIO when the IPARIO goes online:
      • Bit Rate: 1200, 2400, 4800, 9600, 19200 or 38400. Parity: None, Even or Odd. Data Bits: 7 or 8. Stop Bits: 1 or 2.
      • Station: The physical number used in AlphaCom by the IPARIO.
      • Port: Specify which TCP port number to use for the connection with the AlphaCom.
Note icon
  • When using the RS232 serial port of the IPARIO, the TCP port number used for the communication with the AlphaCom server must be added in the firewall of the AlphaCom. In AlphaWeb, select System Configuration > Filters.
  • Failing to do so will cause the IPARIO to reboot over and over again, trying to establish connection with the AlphaCom.



NetAudio

In the NetAudio window you can configure static (fixed) audio links between AlphaCom serveres (AlphaNet), and you can reserve VoIP Channels for SIP trunks.

Note icon Unless you are using AlphaNet Static license, you can normally leave the NetAudio table blank


The Exchange & System > NetAudio window


When to use the NetAudio table:


Source

  • Source:The name of the source node
  • Description: This field is automatically filled in
  • Physical No:The physical number used by the VoIP channel, AGA board or AE1 board in the source exchange
    • VoIP Channels use virtual physical numbers: 605 - 634
    • AE1 boards are using 6 physical numbers according to the board position, and in addition virtual physical numbers: 553 - 604
    • AGA boards are using 6 physical numbers according to the board position: 1 - 138
  • Mod/Pos/Line: This is automatically filled in, as a result of the chosen physical number

Destination

  • Destination: The name of the destination node
  • Description: This field is automatically filled in
  • Physical No:The physical number used by the VoIP channel, AGA board or AE1 board in the destination exchange
  • Mod/Pos/Line: This is automatically filled in, as a result of the chosen physical number.
  • Channel No.: The audio channel number for the connection between the two exchanges. The channel number is an internal index number. Normally you use the channel number that AlphaPro suggests you to use. The same channel number might be reused towards different destination exchanges.
  • Use dynamic license: Enable this flag if the destination node is using AlphaNet Dynamic license


See the AlphaNet article for some examples on how to configure NetAudio.


Ping

The Exchange & System window - Ping button


The Ping button gives the opportunity to test the network before trying to send data. It is also a quick and useful tool to check the network if AlphaPro is unable to communicate with the exchange.

If communication with the AlphaCom server cannot be obtained by pressing Get All, Send All or Send Change, then pressing the Ping button can give valuable information:

If the Ping test returns Successful, the network is ok. Check that the TCP port 60001 (which is used by AlphaPro) is open in AlphaWeb > Filter Settings.

If the Ping test returns Failed, it means the network connection with the AlphaCom server is not OK. Check these factors:

  • Cable error
  • The AlphaCom server is connected to the wrong ethernet port
  • Your PC is not configured with an IP address in the same range
  • AlphaPro is set to communicate with the wrong ethernet port
  • AlphaPro is configured with the wrong IP address
  • Ping is blocked in a network component (switch/router)


Board

The Board table is used to modify the default behavior of the ports on AGA boards and ASLT boards.

The Exchange & System > Board window


  • Module, Board, Port: Shows which Module (65 = AlphaCom), Board position (1-24) and Port number (1-8) according to the selection in the list box
  • Physical Number: The physical position according to the selection in the list box.
  • Port use: The following options are available:
    • Default: Use the default Port Use.
      • For ASLT boards the "Default" Port Use means that the port is used for Intercom Station.
      • For AGA boards the "Default" Port Use depends on the board position in the module. In position 18-21 Audio Program is default, and in position 22-24 MultiModule audio is default.
    • Open Duplex Conference Mixer: Obsolete. The AGA board could previosly be used for duplex (handsfree) conference mixing. In AlphaCom XE (and AlphaCom E) this is handled by the AMC-IP board itself.
    • Station: Configure a port of the AGA board to behave as a "Station". You'll get 0dBm audio in and out. The port can be called to by its directory number, and it can be included in e.g. Simplex Conference and Group Calls. Useful for PA and Mobile Radio integration. Equivalent to ASLT + FBSAR.
    • Multiconference Monitor: Obsolete. The AGA board could previosly be used for multiconference mixing. In AlphaCom XE this function is replaced by an IP based MultiConference feature.
    • Audio Program Feed: A port of the ASLT or AGA board can be configured as an Audio Program input. By default physical numbers 5 and 6 in an AlphaCom XE7 are configured for Audio Program Feed. If these ports are to be used for intercom stations instead, the Port Use must be set to "Default". See Physical number 5 and 6 (AlphaCom E7) for more details.
    • Reserved 5: Not in use.
    • Reserved 6: Not in use.


Events

The Event Handler is based on the concept that when intercom functions run, they report 'events' to a part of the software called the Event Handler. The event can be described as a trigger that sets off an action in the system depending on the information entered here in AlphaPro.

The Exchange & System > Events window


Free Events: Shows how many events are free out of the total of 2000 events.

Free Action Strings: Each line of action commands count as one Action String. If the line is longer than 16 characters, it will count as 2 action strings. This field shows how many action strings are free out of the total of 2000 available action strings.

Show All: When checked, all events in the system will be shown, not only events for the particular station highlighted when the Event window was opened.

Owner. The owner is the source which triggers the event.

  • Owner type. The options are:
    • Station Id: A single station. The Id = Physical number of the station
    • Stations w. UDP: A group of stations. The Id = UDP group 1 - 8
    • Scheduler: Scheduler use the Realtime clock of the AlphaCom as event owner. Event can be configured to trigger at specified hours, weekdays or dates
    • EDI Text Config: Trigger event when receiving text on an EDI port

Event

  • Event Type: Select which event should cause the action. Here an overview of event types.
  • Details: This button is enabled when choosing the Event Type: 1 - Audio. One can then choose which type of audio to trigger the event. See Audio_(Event_Type)
  • Sub Event: Some events have a subevent which makes it possible to filter on more options than only the main event it self.
  • When Change To: The action is executed at a specific event transition, i.e. when the defined event goes on and/or off. The options are:
    • OFF - The event is triggered only when the event goes off
    • ON - The event is triggered only when the event goes on
    • ON or OFF - The event is triggered when the event goes on, and also when the event goes off
  • When Related To
    • All: The event is carried out with no check on the related number, i.e. works for all stations. Many events have no related number, and in that case the fields are not available
    • Directory Number: The action is executed when the event owner is connected to the defined station or feature directory number. The id field has two parts:
    • Stations w. UDP: The action is executed when the event owner is connected to any station which is member of the specified UDP group. The Id specifies the UDP group 1-8.

Action Command or RCO

  • When the upper radio button is selected, you can write action commands which will be executed when the event is triggered. One command per line.
  • When the lower radio button is selected, you can select one RCO (Remote Control Output) to be operated by the event.
  • The button RCO opens the RCO table, where you can map logical RCO numbers to physical outputs.
Action Commands or RCO




RCO

RCOs (Remote Control Output) are used for operation of relays for door opening, call indication etc. In the RCO table logical RCOs are mapped to physical outputs.

The physical outputs are given as:

  • Device + Pin Number, or by
  • Station + Pin Number.
The Exchange & System > RCO window


  • RCO number: The "logical" number (1-500) of the RCO. This number is used as parameter in the RCO command.
  • Description: Any descriptive text may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only.
  • RCO Type = Device: The output is from the AlphaCom (i.e. ASLT or ATLB-12 board) or RIO unit
    • Device:
      • 65 = AlphaCom
      • 1-64 = RIO unit adress
    • Pin number:
      • AlphaCom: Pin 1 - 552. The line card (ASLT or ATLB-12) in board position 1 has pin 1-6, board position 2 has pin 7-12 and so on.
      • RIO unit: Pin 1 - 8
  • RCO Type = Station: The output is from Turbine device, INCA IP Station, IP-LCM Module, ENA amplifier or IPARIO unit
    • Station: The physical number
    • Pin number:
      • Turbine Compact: Pin 1 - 7 (the relay is pin 7)
      • Turbine Extended: Pin 1 - 10 (the relays are pin 7-8, extra relay via TA-10 unit is pin 9-10)
      • INCA IP Station: Pin 1 - 2 (the relay is pin 1)
      • IP-LCM Module: Pin 1 - 7 (the TKIS relay is pin 7). Pin 17-24 are the IP-LCM relays 1 to 8
      • ENA Amplifier: Pin 1 - 6
      • IPARIO unit: Pin 1 - 8


Devices

The Exchange & System > Devices window


  • Device Number: The device number is a unique address identifying the device (e.g. RIO, AlphaVision). The device number is a number between 1 - 64.
  • Description: Any descriptive text may be entered. Note that this text is not transferred to the AlphaCom server. It is stored locally on the PC only.
  • Device Type: There are five options:
    • Invalid device: Default. No valid device connected.
    • Unknown device: External computer with unspesific functionality. Can be used for any type of device using the AlphaCom Data Protocol ACDP
    • RIO: Used by the RIO unit
    • Control Handler: PC with call queuing features
    • Operator (passive): Passive device, for Simple Link Layer terminal. AlphaVision uses this device type
  • Data [ACDP Link]: The ACDP (AlphaCom Data Protocol) link used for communication with the device. The actual ACDP link is configured in the Serial Ports setup.


NetRouting

NetRouting is used to define the data and audio routing between AlphaCom servers (AlphaNet), and from an AlphaCom server to a SIP Trunk node.
Between AlphaCom servers one have to define the NetRouting in both directions. For SIP Trunking it is sufficient to define NetRouting from AlphaCom server to the SIP Trunk node.

Note icon Configuration of NetRouting for AlphaNet requires AlphaPro Professional (the USB hardware dongle must be present in the PC)


How to configure the NetRouting:

  1. From the AlphaPro main window, select Exchange & System
  2. Select the Source exchange from the list box to the left
  3. Select NetRouting
  4. Press Insert
  5. Select the Destination exchange from the list of exchanges that appeares
  6. Fill in Data and Audio routing under "Primary Route" as described below


NetRouting configuration


Source

  • Source: The source node for the route
  • Description: Filled in by the system. The text is taken from the "Description" field in Exchange & System > System

Destination

  • Destination: The final destination node for the route
  • Description: Filled in by the system. The text is taken from the "Description" field in Exchange & System > System

Primary Route

  • Data - ACDP Link: Select the link type used for the connection:
  • Data - Node Number: Data connection and signaling will be sent to the node specified here. Normally this is the destination node
    • There is an option to send data signaling in transit via another node. Then enter the node number of the transit node here
  • Audio - Node Number: Audio will be sent to the node specified here. Normally this is the destination node
    • There is an option to send audio in transit via another node. Then enter the node number of the transit node here
    • Data and Audio doesn't have to be sent to the same node
  • Audio on IP: When checked, the audio is sent as VoIP over the IP network. Uncheck when using analog lines (AGA board) or E1/T1 trunk (AE1 board) for audio

Alternative Route
As an option it is possible to specify an Alternative Route in case the data connection on the Primary Route fails. Typically the primary route is configured to use an IP network on Ethernet Port 0, while the alternative route is configured to use a different IP network on Ethernet Port 1. It is also possible that one route is using ethernet, while the other route is using serial link and AGA or AE1 board.

Alternative Routing can also be used for SIP Trunking when there is a need for Failover to redundant SIP Server if the primary SIP server fails.

The configuration options are the same as for Primary Route:

  • Data - ACDP Link: Select the link type used for the connection
  • Data - Node Number: Data connection and signaling will be sent to the node specified here. Normally this is the destination node
  • Audio - Node Number: Audio will be sent to the node specified here. Normally this is the destination node
  • Audio on IP: When checked, the audio is sent as VoIP over the IP network. Uncheck when using analog lines (AGA board) or E1/T1 trunk (AE1 board) for audio


General and Advanced Settings

When configuring the NetRouting, there are some additional options available.

General Settings tab

General Settings in the NetRouting window


  • Preferred codec: Available options are: Best Available, G711u, G711a and G722.
    • When creating NetRouting to an AlphaCom node (AlphaNet), "Best Available" is default. Normally you should not change this setting.
    • When creating NetRouting to a SIP Trunk node, AlphaPro will import the codec setting from the SIP Trunk Node configuration. It is possible to override that configuration here. Set codec according to what is supported by the SIP Server.
  • RTP Packet Size:
    • When creating NetRouting to an AlphaCom node (AlphaNet), "20ms" is default. Normally you should not change this setting.
    • When creating NetRouting to a SIP Trunk node, AlphaPro will import the RTP Packet Size from the SIP Trunk Node configuration. It is possible to override that setting here.
  • Billing Node: AlphaCom has an embedded Billing Software module for access control and charging of external phone calls. When Billing is being used in an AlphaNet system, you need to choose by this setting in which node the Billing Module is running. Data about the external phone call will then be forwarded to this node for further processing.
  • Recording: Each link has 2 audio recording flags associated with it, for incoming and outgoing calls. By default, both these flags are enabled. For the recording of AlphaNet calls, the rule is:
    • Record incoming call if the Incoming flags for both the station AND the source node are enabled
    • Record outgoing call if the Outgoing flags for both the station AND the destination node are enabled
This makes it possible to select the side on which to record an AlphaNet call, or to have the option to record the call at both ends.
  • IP Only: Set this flag if the Destination Node (B-node) is an AlphaCom XE1 ("IP Only") or ICX-AlphaCom, and the Source Node (A-node) is an AlphaCom XE7, XE20 or XE26 with analog stations. The flag will force duplex voice switching to take place in the Source Node where ASLT or ATLB-12 cards are present for the handling of the voice switching, which is required when analog stations are involved in a call. The flag will override the default behavior, which is to perform the voice switching in the Destination Node.
It is not necessary to enable the "IP Only" flag when:
  • Both nodes are AlphaCom XE1 or ICX-AlphaCom
  • Both nodes are AlphaCom XE7/20/26 (with ASLT cards)
  • Monitor SIP Trunk [SIP Trunk only]: When enabled, the AlphaCom will send the SIP message OPTIONS to the SIP server every 5 seconds, and expects a response in due time, else the link is reported down. The event 29 - AlphaNet Link is triggered when the communication with a SIP server goes up or down. See Monitoring a SIP Trunk for more details. The monitoring can also be used for Alternative Routing to Redundant SIP server.
  • Exigo Node [SIP Trunk only]: Enable this flag if the SIP Trunk is used towards an Exigo PA system. In an AlphaCom - Exigo integration this flag will ensure a quicker (max 15 seconds) switchover of audio from A- to B-system in case the A-controller fails.
When simultaneous AlphaNet setup from A and B Exigo Controllers, the overlapping B setup (Group Call or Audio Program to group) will be set in "Camp On" mode as long as A is active. If A fails, then B will continue to play. This assumes that Exigo A and B node is configured as odd/even-numbers according to rules found on ExigoWiki.
  • On incoming calls in private mode: Reply 180 RINGING [SIP Trunk only]: By default the AlphaCom responds with the SIP message 200 OK on an incoming call to a station in private mode, and an audio connection is immediately established. When enabling this flag, the AlphaCom will instead first respond with 180 RINGING. When the called party answers the call, the audio connection will be established and the message 200 OK will be sent.


Advanced Settings tab

AdvancedSettings in the NetRouting window


  • Duplex switching: These settings are applicable only when analog ASLT stations or ATLB-12 telephones are involved in an AlphaNet call. By default the duplex voice switching takes place in the destination node (B-node). Default behavior can be modified by these settings.
    • Avoid Duplex in Start Node: Inhibit use of duplex voice switching in the source node on AlphaNet calls to this destination node. This will force duplex switching in destination node also for IP-MultiModule and IP AlphaNet calls to traditional AMC ver. 8 or 9 systems.
    • Avoid Duplex in Transit Node: This flag is used in mixed AlphaNet systems where there is a combination of AlphaNet over IP, and traditional analog (AGA/AE1) AlphaNet, and the end node is running AMC ver. 8 or 9. The flag must be set in the transit node where both the AlphaNet IP and AGA/AE1 are connected. The purpose is to force duplex to run in the transit exchange to avoid echo, as end nodes running AMC 8/9 do not handle delays on the audio link. (AlphaPro text says "Avoid Duplex in Transit Node", the correct is "Force Duplex in Transit Node")
    • Force Duplex in Start Node: Force use of duplex voice switching in the source node (A-node) on AlphaNet calls to this destination node (B-node) for all node types. If AGA/AE1 is used, this flag will only work if source node number is lower than the destination node number. "Force Duplex in Start Node" is default behavior when calling to a SIP Trunk node, RM node or M100 node. Compared to the "IP Only" flag, The "IP Only" assume that all stations in the destination node can do echo cancellation, thus go open duplex when handset is lifted in source node
  • RTP Delay: Jitter buffer size. Value 0 = Adaptive jitter buffer (recommended)
  • Gain In: Range from -30dB to +30dB. 0=Use default value. Default value is 0dB gain for AlphaNet, and -6dB for SIP Trunk
  • Gain Out: Range from -30dB to +30dB. 0=Use default value. Default value is 0dB gain for AlphaNet, and +9dB for SIP Trunk
  • Limit In: Range from 3 to 36dB. 0=Use default value (= 0dB).
  • Limit Out: Range from 3 to 36dB. 0=Use default value (= 0dB).
Note icon The Gain and Limit settings are used only when audio is transcoded. E.g. if an IP Station calls via AlphaNet or out on a SIP Trunk and the station and the trunk are using the same codec, there will be no adjustments of Gain/Limit.


  • Max VoIP Channels: The number of simultanous calls are limited by the AlphaNet license or the SIP Trunking license. In addition to this, it is possible to further limit how many VoIP channels a specific AlphaNet link or SIP Trunk should be able to use. This could be useful e.g. if there are multiple SIP trunks, and one might want to set restrictions on how many VoIP channels one particular trunk can use.
Retrieved from "https://wiki.zenitel.com/w/index.php?title=Exchange_%26_System_(AlphaPro)&oldid=235416"