Actions

Special

Search results

Create the page "AlphaPro - Configuration" on this wiki! See also the search results found.

  • 1-1c. AlphaPro - Getting started (practice)
    [[File:1-1c config.PNG|left|thumb|400px|System configuration]] ===AlphaPro===
    453 bytes (59 words) - 15:31, 17 March 2011
  • AlphaPro Link Layer
    ...s a dedicated link layer which is effective for transport of address/memory-value information. ...change, and how many messages will come, so it’s not suited as a general bi-directional DP port.
    918 bytes (148 words) - 14:32, 7 September 2017
  • 1-2a. Analogue Stations – Dual Display (solution)
    [[File:1-2a config.PNG|left|thumb|400px|System configuration]] ===Configuration===
    2 KB (255 words) - 10:03, 30 June 2022
  • Master Station Display configuration
    ...o [[Users_%26_Stations_(AlphaPro)#General|'''Station Type''': ''CRM'']] in AlphaPro the display layout will change from the standard two line display to a four [[File:CRM 6.PNG|left|500px|thumb|Standard display station without any configuration having received three mail messages]]
    1 KB (236 words) - 15:11, 5 February 2018
  • Communicate (alphaPro)
    ...lphaPro software version 12.1.3.0, AlphaPro supports communication with ICX-AlphaCom via HTTPS. To enable this: ...mmunication buttons''' are used to transfer configuration data between the AlphaPro PC and the AlphaCom server.
    3 KB (524 words) - 11:40, 25 March 2020
  • 1-2b. Analogue Stations – Substation (solution)
    [[File:1-2b config.PNG|left|thumb|500px|System configuration]] * In AlphaPro, '''Users & Stations''' window, select physical port 4 and configure as fol
    860 bytes (119 words) - 10:04, 30 June 2022
  • 1-3b. IP Stations – Substations (solution)
    [[File:1-3b config.PNG|left|thumb|500px|System configuration]] === Station configuration ===
    2 KB (336 words) - 10:04, 30 June 2022
  • Transparent Mode DAK-Key Configuration
    == Configuration from AlphaPro Event Handler == == Configuration using TST console ==
    2 KB (279 words) - 12:16, 23 February 2023
  • Backup
    A '''Backup''' of the running configuration on the [[AMC-IP]] board can stored on a file in the flash memory. The file, called ''back ...kup''': Dial 7820 + M from a [[SuperUser]] station. A copy of the AlphaPro configuration is stored in a backup file.
    5 KB (723 words) - 15:54, 24 January 2017
  • Autoload
    To load [[AlphaCom Feature List|factory default settings]] to an [[AMC-IP]] board an '''autoload''' or 'cold start' must be performed. The AMC configuration will be set to factory default by one of the following actions:
    1 KB (206 words) - 08:20, 8 September 2017
  • 2-3c. SIP trunk with MP114 (solution)
    [[File:2-3c exercise.PNG|left|thumb|500px|System configuration]] [[File:2-3c solution.PNG|thumb|left|500px|Setting IP address on ethernet port 1]]
    2 KB (306 words) - 10:07, 30 June 2022
  • 1-3c. IP Stations – SoftClient (solution)
    [[File:1-3c config.PNG|left|thumb|450px|System configuration]] [[File:1-3c solution1.PNG|thumb|left|250px|SoftClient: File -> Preferences window]]
    1 KB (209 words) - 10:04, 30 June 2022
  • 1-3d. IP Stations – SIP Station X-Lite (solution)
    [[File:1-3d config.PNG|left|thumb|500px|System configuration]] === Install and configure the X-Lite SIP client===
    1 KB (195 words) - 10:05, 30 June 2022
  • 2-3d. SIP trunk with GSM Gateway (solution)
    [[File:2-3d exercise.PNG|left|thumb|500px|System configuration]] [[File:2-3c solution.PNG|thumb|left|500px|Setting IP address on ethernet port 1]]
    2 KB (307 words) - 10:07, 30 June 2022
  • IP-LCM Configuration (ICX-AlphaCom)
    This article describes how to configure the [[IP-LCM|IP-LCM Module]] when used with an AlphaCom server. == Basic configuration ==
    4 KB (584 words) - 10:35, 22 April 2024
  • (500) Internal Server Error
    ...(500) Internal Server Error" when doing a SendAll or GetAll operation from AlphaPro, it can be due to several reasons: 2. Redundant Server (IPHA) system: The error message appears if AlphaPro version 12 (or newer) is configured to communicate with the Secondary serve
    1 KB (209 words) - 10:53, 24 October 2023
  • IP-LCM Configuration (AlphaCom mode)
    This article describes how to configure the [[IP-LCM|IP-LCM Module]] when used with an AlphaCom server. == Basic configuration ==
    4 KB (593 words) - 13:31, 14 December 2022
  • AlphaCom clock
    * From [[AlphaWeb#Time_Manager|AlphaWeb]], in the ['''System Configuration'''] > ['''Time and Date'''] menu ...ime'''] button in the Communications window (This feature is obsolete from AlphaPro 11.5.x.x)
    785 bytes (114 words) - 18:27, 16 March 2015
  • Grandstream BudgeTone 100
    *The remaining configuration is done from the web interface *Log on to the phone via your web-browser using the IP address entered above
    1 KB (167 words) - 22:31, 10 October 2017
  • SIP registrar node - configuration
    == AlphaWeb Configuration == * The SIP protocol must be enabled in the [[AlphaWeb#Filtering.2C_the_AMC-IP_firewall|firewall]]. Enable port 5060 on the desired Ethernet port. Port
    4 KB (569 words) - 09:35, 16 April 2019
  • NVRAM version
    ...VRAM/Customer Database versions are different, the running intercom (AMCd) configuration will automatically be deleted and factory default settings will be loaded. ...NVRAM version 10.50, but an upgrade from 10.30 to 10.60.3.14 will set the configuration to factory defaults.
    2 KB (243 words) - 14:43, 29 May 2019
  • 1-1c. AlphaPro - Getting started (solution)
    [[File:1-1c config.PNG|left|thumb|400px|System configuration]] ===AlphaPro===
    2 KB (334 words) - 10:03, 30 June 2022
  • 1-3a. IP Stations – Master Stations (solution)
    [[File:1-3a config.PNG|left|thumb|450px|System configuration]] * Select '''Setup''' to enter the off-line menu. Password: 1851
    3 KB (406 words) - 10:04, 30 June 2022
  • Adding additional relay(s) to a Zenitel IP Device
    *'''Software''': The Turbine Station must have sw version TCIS-3.0.3.3 or newer. The MRBD has 6 jumpers (S1-S6) which determines if the relay should be triggered on active "high" signa
    3 KB (482 words) - 16:23, 23 June 2023
  • Private Ringing, Customized ringing tone
    A wav file with the wanted ringing tone must be uploaded to the ICX-AlphaCom or AlphaCom XE via the web interface. * AlphaPro 11.6.3.8 or later
    3 KB (415 words) - 10:38, 7 November 2022
  • SJphone
    ...e global number ([[Call remote station feature|feature 83]]) as entered in AlphaPro === Configuration of AlphaCom E ===
    1 KB (173 words) - 10:13, 16 August 2022
  • AlphaPro 11.7.x - Release Notes
    Previous Release - [[AlphaPro 11.6.x - Release Notes]] Next Release - [[AlphaPro 12.0.x - Release Notes]]
    4 KB (578 words) - 05:31, 8 March 2022
  • Grandstream GXP2000
    [[Image:Grandstream GXP2000.png|thumb|Grandstream GXP-2000]] This article describe how to configure the Grandstream GXP-2000 IP telephone to work with the AlphaCom XE.
    4 KB (604 words) - 22:31, 10 October 2017
  • Upgrade XE1 to ICX
    ...article describes best practice to replace an AlphaCom XE1 with an AlphaCom-ICX500 ...should be upgraded to latest version. [[AMC-IP software upgrade (Black AMC-IP board)|upgrade procedure]].
    856 bytes (121 words) - 10:19, 25 September 2020
  • Voice Activity Detection (VAD)
    <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:VAD principle.png|200px]]</td>
    5 KB (707 words) - 15:47, 25 October 2023
  • IP Desktop Master Station - 1008000000
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (236 words) - 14:04, 2 May 2023
  • Genetec Sipelia - ICX-AlphaCom integration
    ...Center Software to ICX-AlphaCom or AlphaCom XE and intercom stations in SIP-mode. Sipelia is a small IPBX. Security Center operator positions have a SIP-client which register with Sipelia.
    2 KB (302 words) - 15:07, 26 June 2023
  • IP Desk Master -V2
    [[File:IPDM-V2-P-newZ.png|thumb|400px|IP Desktop station 1008400000 (IPDM-V2)]] *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (207 words) - 13:37, 29 January 2024
  • Groups
    *Set-up of [[Audio Program]] or [[Simplex conference]] to a group. ...rger groups than 50 members, one have to enable group call via multicast. (AlphaPro: Exchange & System > System > VoIP tab > Enable "Multicast"). See also: [[M
    2 KB (382 words) - 09:21, 30 June 2022
  • IP Desk Master -V2-P
    [[File:IPDM-V2-P-newZ.png|thumb|400px|IP Desktop station 1008400090 (IPDM-V2-P)]] *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (209 words) - 13:37, 29 January 2024
  • IP Desktop Master Station - 1008001000
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (240 words) - 14:05, 2 May 2023
  • Active Noise Cancellation (ANC)
    ...ture is by '''default active''', hence there is normally no need to do any configuration. == IC-Edge mode==
    3 KB (380 words) - 15:31, 25 October 2023
  • UTStarcom F1000G WiFi phone
    [[Image:UTStarcom config.jpg|thumb|right|400px|Configuration example - AlphaCom E and UTStarcom F1000G]] === Configuration of AlphaCom ===
    2 KB (349 words) - 10:12, 16 August 2022
  • IP OR Master Station - 1008015000
    ===This product is '''Discontinued''' and replaced by [[IP-CROR|1008415000 IP-CROR]]=== *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (250 words) - 14:06, 2 May 2023
  • IP Desk Master -V2 w/handset
    [[Image:IPDMHB-V2-P-newZ.png|thumb|500px|IP Desktop Master with Handset V2 (1008401100)]] [[Image:IPDMH-V2-P-newZ.png|thumb|500px|IP Desktop Master with Handset V2 (1008401000)]]
    2 KB (222 words) - 13:49, 29 January 2024
  • 1-1b. AlphaWeb - Getting started (solution)
    [[File:EX1-1b.PNG|left|thumb|600px|System configuration]] *In AlphaWeb go to ''System Configuration -> Interfaces''
    1 KB (205 words) - 10:03, 30 June 2022
  • IP Desk Master -V2-P w/handset
    [[Image:IPDMHB-V2-P-newZ.png|thumb|500px|IP Desktop Master with Handset V2-P (1008401190)]] [[Image:IPDMH-V2-P-newZ.png|thumb|500px|IP Desktop Master with Handset V2-P (1008401090)]]
    2 KB (229 words) - 13:47, 29 January 2024
  • 1-4g. Main Features - Alarm Message Distribution (solution)
    [[File:1-4g config.PNG|left|thumb|450px|System configuration]] [[File:1-4g solution1.PNG|left|thumb|500px|From AlphaWeb, '''System Maintenance''' ->
    2 KB (255 words) - 10:06, 30 June 2022
  • Clean room intercom station IP-CROR
    The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean room [[File:IP-CROR-newZ.png|thumb|350px|IP-CROR station (1008415000)]]
    2 KB (233 words) - 15:09, 30 April 2024
  • SIP phone: Forward unattended call
    * [[Configuration guide for STENTOFON IP-DECT|IP Dect System 6000]] * [[Configuration guide for X-Lite|X-Lite]]
    2 KB (278 words) - 12:21, 24 February 2023
  • 1-4i. RCI - Remote Control Input (solution)
    [[File:1-4i config.PNG|left|thumb|450px|System configuration]] [[File:1-4i solution1.PNG|left|thumb|500px|In AlphaPro, Exchange & System -> RCI, select Input 1, and program the ON and OFF actio
    1 KB (165 words) - 10:06, 30 June 2022
  • TouchLine station used for Call Queing
    TouchLine display stations can be used for call queuing. With its 2-line display the TouchLine station is suitable to use as a simple "Guard sta ===Configuration for Call Queuing===
    1 KB (169 words) - 01:56, 15 June 2022
  • DIVUS Videophone
    * '''Enable re-registration''': ''Enable'' [[File:Eudivusvideophone-6-2.jpg|left|thumb|500px]]
    3 KB (521 words) - 12:44, 9 June 2022
  • Grandstream HandyTone-488
    *HandyTone-488 is an Analog Telephone Adapter (ATA) with one FXS port *If HandyTone-488 loose power, registration or network, you get pass-through from telephone to PSTN (FXO port)
    2 KB (257 words) - 05:34, 25 March 2022
  • SIP Devices - creating an account
    [[File:ICX SIP Devices.PNG|thumb|right|600px|ICX-AlphaCom as SIP Server]] ...server. This article describes how to '''create a SIP account''' in the ICX-AlphaCom to which SIP devices can register.
    8 KB (1,130 words) - 23:35, 16 March 2023
  • AlphaVision - How to get started
    This article gives step-by-step instructions how to get started with [[AlphaVision]]. Main configuration steps are:
    4 KB (677 words) - 10:13, 7 June 2022
  • AMC-IP software upgrade (Black AMC-IP board)
    [[Image:AMC Black.PNG|thumb|250px|AMC-IP Processor Board (Black)]] ...ibes how to upgrade the software in an AlphaCom server, running a black AMC-IP board (hardware revision 5 or later).
    2 KB (304 words) - 15:23, 4 May 2023
  • Dynamic group call
    ...ed to use [[CRM_V_-_Control_Room_Master|CRM V station]] or [[ECPIR-3P|ECPIR-3P panel]], as these devices have buttons with LEDs showing status. *Press a dedicated "Group Configuration" [[DAK]] key. The red led in key starts flashing, and the Dynamic Group is
    4 KB (649 words) - 11:13, 8 July 2022
  • Entelec Sky-Walker - ICX-AlphaCom integration
    The Sky-Walker Integration Platform from Entelec is a building management system whi ...t possible to set up calls, operate the M-button, for instance for Press-To-Talk operation or set the status of RCO's.
    2 KB (240 words) - 15:41, 15 August 2022
  • PhonerLite SIP Client
    ...0100|IP Video Door Station with CP-CAM]] camera: '''<nowiki>(http://<Camera-IP>/mjpg/video.mjpg)</nowiki>''' ...110200|IP Video Door Station with Axis]] camera: '''<nowiki>(http://<Camera-IP>/mjpg/video.mjpg)</nowiki>'''
    3 KB (507 words) - 18:06, 11 February 2017
  • Serial communication - ICX-AlphaCom
    In case there is a need for serial communication between the ICX-500 and a remote application, an external Ethernet to Serial Converter is re ...onverter NPort 5230 from Moxa] to achieve serial communication with the ICX-500.
    4 KB (615 words) - 16:47, 11 October 2023
  • IP Flush Master -V2
    [[Image:IP-Flush-newZ.png|thumb|500px|IP Flush Master station (1008431000)]] * [[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (312 words) - 14:00, 29 January 2024
  • AlphaPro - Main Menu
    ...ration windows are selected by pressing the menu buttons in the top of the AlphaPro user interface. '''AlphaPro menu buttons''' (click on one of the buttons below to get help for that par
    6 KB (844 words) - 11:04, 4 November 2019
  • Configuration guide for IP Heavy Duty v2
    ...P Heavy Duty Station V2|IP Heavy Duty Stations (Version 2)]] used in '''ICX-AlphaCom''' mode. ==AlphaPro Configuration==
    5 KB (718 words) - 09:30, 20 September 2023
  • IP Flush Master - 1008031000
    ...s '''Discontinued''' and replaced by [[IP Flush Master -V2|1008431000 CRM-V-2]]=== *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    3 KB (361 words) - 14:05, 2 May 2023
  • Configuration of the VR3G-1 and VR3G-1P
    ...t intercom - VR3G-1|VR3G-1]] and [[Vandal Resistant intercom - VR3G-1P|VR3G-1P]]: * Tamper Alarm (ICX-AlphaCom mode)
    5 KB (848 words) - 16:01, 7 September 2023
  • Program Direct Access Key feature
    |'''Description''': || Program [[DAK]] key. Dial: <dir.no> <dak-sequence> <DAK-key>, e.g. 784 + 123 + DAK key.<br>Directory number 9541 is used in the menu ...fore the reset is executed. Also after a SendChg or SendAll operation from AlphaPro the flash memory is automatically synchronized.
    1 KB (198 words) - 09:45, 8 October 2019
  • IPHA - Monitoring server status
    The [[Redundant Servers - ICX-AlphaCom|IP-HA system]] reports changes of the server state to the [[Event Handler]]. == Configuration ==
    3 KB (384 words) - 16:44, 28 June 2022
  • 1-1b. AlphaWeb - Getting started (practice)
    [[File:EX1-1b.PNG|left|thumb|600px|System configuration]] * In Filters settings, enable ports for AlphaPro and AlphaWeb for ethernet port 1
    569 bytes (85 words) - 11:06, 1 November 2017
  • Getting Started (ICX-AlphaCom)
    This article describes step by step how to get started with an ICX-AlphaCom system. ...lized in the image to the right, the article will show how to set up an ICX-500 server, a Desktop station and a Help Point/Door intercom.
    9 KB (1,490 words) - 12:56, 26 February 2024
  • Turbine Configuration - AlphaCom mode
    ...ailable in the IP settings can be found here: [[Station Web Interface - ICX-AlphaCom mode]] *ICX-AlphaCom IP address
    6 KB (954 words) - 15:15, 28 January 2022
  • IP Station Configuration - ICX-AlphaCom mode
    ...he minimum configuration required for IP Stations to operate with an '''ICX-AlphaCom''' or '''AlphaCom XE''' server. The IP Stations are configured thro * [[Getting Started (ICX-AlphaCom)|Getting Started with ICX-AlphaCom]]
    6 KB (951 words) - 11:32, 23 June 2023
  • CNL IPSecurityCenter - ICX-AlphaCom integration
    ...act faster and more precisely to incidents by providing operators with real-time Situational Awareness through a Common Operating Picture (COP) and foll ==ICX/AlphaCom Configuration==
    4 KB (615 words) - 10:19, 15 August 2022
  • AlphaPro 12.0.x - Release Notes
    Previous Release - [[AlphaPro 11.7.x - Release Notes]] Next Release - [[AlphaPro 12.1.x - Release Notes]]
    6 KB (847 words) - 05:32, 8 March 2022
  • Door Opening using Dummy Number (Event Handler)
    ...al 9545 + 6 to trigger [[RCO]] 4 for 2 seconds, and disconnect with success-tone. Use the two-step event trigger, [[Event trigg on dialing digits|feature 105]].
    1 KB (194 words) - 11:14, 8 July 2022
  • Hotline Call
    <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:HotlineCall3.PNG|300px]]</td>
    2 KB (328 words) - 09:58, 24 May 2022
  • TA-10
    ...tions [[TFIE-1]] and [[TFIE-2]], and the Turbine kits [[TKIE-1]] and [[TKIE-2]]. [[File:1008140100.PNG|thumb|350px|The TA-10 Relay Module]]
    2 KB (277 words) - 14:41, 27 June 2023
  • Touchless sensor (w/ backbox)
    The '''Touchless sensor''' (item 2390020100) is an IR-sensor that connects to Zenitel IP stations, and is used to activate calls w The sensor button is powered by 5 volts. Most Zenitel IP stations has a built-in 5V output which can be used to power the sensor button.
    3 KB (371 words) - 10:21, 24 October 2023
  • Configuration guide for IP Heavy Duty
    Here is configuration guide for the current [[Configuration_guide_for_IP_Heavy_Duty_v2|IP Heavy D == Keyboard configuration ==
    6 KB (896 words) - 15:04, 1 September 2022
  • AMC-IP software upgrade (Red AMC-IP board)
    [[image:AMC-IP card.jpg|thumb|250px|The red AMC-IP Board]] ...upgrade the software on a [[AMC-IP - AlphaCom Processor Board (Red)|red AMC-IP board]], hardware revision 4 and earlier.
    4 KB (620 words) - 13:03, 23 June 2022
  • Group Call - Increased volume
    ...eature '''should not exceed approx. 50 stations'''. (Not applicable for ICX-AlphaCom) == Configuration ==
    2 KB (315 words) - 15:22, 11 August 2022
  • Timed Signalling and Messaging
    <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:Schedule Message.PNG|350px]]</td>
    5 KB (712 words) - 20:36, 22 July 2022
  • Two Line Names
    ...sible to operate with a mix of one and two line names. If a user has a one-line name, the second line ==Configuration==
    4 KB (606 words) - 12:59, 24 May 2022
  • IP station Discovery and Initial Configuration from AlphaWeb
    The discovery function of the AlphaCom is very basic and require some pre-conditions to work. =Configuration of AlphaCom=
    6 KB (897 words) - 11:05, 8 September 2017
  • SIP phone as station
    * AlphaPro 10.56 or higher == AlphaCom Configuration ==
    10 KB (1,521 words) - 12:00, 27 February 2023
  • AlphaCom XE1
    <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:XE1.PNG|350px]]</td>
    7 KB (1,139 words) - 13:20, 9 February 2023
  • IMT - Identify Stations
    Zenitel IMT supports two-way identification of discovered IP stations by: * receiving a button-press event from a station
    2 KB (350 words) - 13:31, 16 August 2022
  • AlphaCom Exchange Upgrade
    ...s all existing stations and other boards such as [[ASLT]], [[ATLB]], [[ATLB-12]], [[AE1]], [[AGA]], [[ASVP]], [[APC]], can be kept. New AMC-IP board and AMC filter board is required:
    3 KB (502 words) - 06:12, 20 October 2020
  • Tamper switch
    The [[IPVRS-1|IP Vandal Resistant Substation]] can be fitted with a tamper switch, makin ==ICX-AlphaCom configuration==
    3 KB (488 words) - 14:05, 8 June 2023
  • IP-DECT base 300
    [[Image:STENTOFON IP DECT Configuration Example.JPG|thumb|410px|Configuration example]] ==Configuration of AlphaCom XE==
    6 KB (954 words) - 16:01, 8 November 2021
  • Ringing Group Feature
    *The caller can be answered from any member of the ringing group by "M-key" or "OFF HOOK" *The private ringing tone can individually be muted by pressing "C-key" at a station in the ringing group
    5 KB (796 words) - 09:22, 30 June 2022
  • 2-2f. Scheduler - Event Handler (solution)
    [[File:2-2f exercise.PNG|left|thumb|500px|System configuration]] In AlphaWeb, '''System Configuration''' -> '''Messaging''', upload the wav-file using Message group 30, Index 3. This message will get directory number
    2 KB (380 words) - 10:07, 30 June 2022
  • SYNC FLASH
    |colspan="5"|Force synchronization of configuration database to flash Flash is always synchronized after AlphaPro update (SendChg/SendAll) and before software reset if any pending changes.
    1,016 bytes (137 words) - 09:54, 28 June 2022
  • ENA Amplifier - Basic configuration (AlphaCom mode)
    {{AI}} [[File:ENA Amp block.png|thumb|800px|ICX-AlphaCom with ENA Amplifiers]] ...For a more detailed description of various settings and options, see [[ENA Configuration - AlphaCom mode]]
    4 KB (552 words) - 11:56, 9 February 2022
  • Cisco Call Manager 10, 11 and 11.5 configuration guide
    This article describes how to configure SIP Trunk integration between ICX-AlphaCom (and AlphaCom XE) and Cisco Call Manager 10.0, 11.0 or 11.5. *ICX-AlphaCom or AlphaCom XE server
    9 KB (1,392 words) - 13:26, 21 June 2023
  • PTT mode - IP Speakers
    ...cation with an IP speaker with microphone, the speaker must operate in "PTT-mode" (Simplex mode). ...describes how to configure "PTT-mode" when the IP Speaker is used in an ICX-AlphaCom or AlphaCom XE system.
    990 bytes (151 words) - 16:02, 2 June 2022
  • IP-ARIO
    [[File:IP-ARIO.PNG|thumb|400px|IP-ARIO, Item Number: 1008095100]] * For PA integration, use [[TKIS-2]]
    2 KB (310 words) - 09:18, 16 August 2022
  • RCI - Remote Control Input in AlphaCom Systems
    A '''Remote Control Input (RCI)''' is triggered by an external potential-free contact. Select a device from the above table to see details on connections and configuration
    6 KB (821 words) - 13:17, 9 February 2023
  • HTTP string: Send from AlphaCom
    HTTP GET can be sent to third-party systems using EDO ports and Event Handler. ==Configuration==
    4 KB (557 words) - 00:56, 26 March 2024
  • Configuration of the IP Vandal Resistant Substation TKIE
    ==ICX-AlphaCom Mode== * Input 1 is programmed in AlphaPro as '''DAK 11''' in DAK window. The example shows DAK 11 calling stations in
    3 KB (528 words) - 16:01, 10 May 2023
  • Configuration of TMIS-2
    The call button and station LED on the [[TMIS-2|Turbine Mini 2]] must be configured. ==ICX-AlphaCom Mode==
    3 KB (522 words) - 14:46, 10 February 2022
  • Habtech - ICX-AlphaCom integration
    ...tem from Habtech integrates with ICX-AlphaCom. This integration uses the VS-SDK for AlphaCom connecting with the AlphaNet via TCP. ===ICX-AlphaCom===
    2 KB (328 words) - 14:18, 12 February 2024
  • Redundant Servers (AlphaCom XE)
    ...s. For redundancy using ICX-AlphaCom servers, see [[Redundant_Servers_-_ICX-AlphaCom]] <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;">
    16 KB (2,500 words) - 17:08, 28 June 2022
  • TCIA-2 Call Button and Station LED
    The call button and station LED on the TCIA-2 must be configured. ...A-2 is equipped with one LED in the call button, and this is the green Talk-LED.
    3 KB (548 words) - 12:51, 5 October 2023
  • Total Recall Voice Recording
    ICX-AlphaCom and AlphaCom interfaces to the Total Recall range of voice recorder In the AlphaPro Recording TAB set the following properties:
    1 KB (176 words) - 03:50, 4 May 2023

View (previous 100 | next 100) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://wiki.zenitel.com/wiki/Special:Search"