Actions

Special

Search results

Create the page "SIP Intercom Configuration" on this wiki! See also the search results found.

Page title matches

  • Configuration guide for School IP Intercom (SIP)
    {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...r the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (313 words) - 17:25, 31 January 2023

Page text matches

  • Cisco Call Manager 6 configuration
    {{S}}Software requirement: The SIP intercom must have firmware 01.11.x.x or later. [[Image:SIP Intercom 3.PNG|thumb|350px|SIP Intercom Configuration - User Information]]
    3 KB (405 words) - 12:40, 15 August 2022
  • Cisco Call Manager 8 configuration
    {{S}}Software requirement: The SIP intercom must have firmware 02.02.3.1 or later. [[Image:Cisco8_1.png|thumb|left|500px|SIP Intercom Configuration - User Information]]
    3 KB (430 words) - 15:31, 13 March 2018
  • Turbine Configuration
    The [[:Category:Stations#Turbine_stations|Turbine Intercom stations]] can be set to operate in one out of three different modes: * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    399 bytes (57 words) - 14:31, 30 June 2022
  • School IP Intercom - 1402001000
    [[image:1402001000.PNG|right|250px|IP School Intercom]] * [[IP Flush Connections|Intercom connections]]
    2 KB (322 words) - 09:48, 16 August 2022
  • Configuration guide for School IP Intercom (Pulse)
    {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...r the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (312 words) - 17:25, 31 January 2023
  • Configuration guide for School IP Intercom (SIP)
    {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...r the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (313 words) - 17:25, 31 January 2023
  • Configuration guide for IP Hotline (SIP)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP stations, see: * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    1 KB (167 words) - 14:07, 23 February 2024
  • IP Flush Master v2 - External Loudspeaker
    ...the top right corner. Then navigate to '''Advanced ICX-AlphaCom'''/'''SIP Configuration''' --> Audio Settings. ...normal audio and alarm audio (audio override) must be adjusted in the web configuration.
    748 bytes (100 words) - 08:55, 16 August 2022
  • Configuration guide for School IP Intercom (Edge)
    {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...r the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (309 words) - 17:24, 31 January 2023
  • TFTP Provisioning (SIP)
    ...used in '''SIP mode''', an IP station may be set up to automatically pull configuration from a TFTP server. The IP address of this TFTP server can be obtained usin ...ceives configuration via TFTP provisioning it will automatically switch to SIP mode.
    2 KB (252 words) - 09:22, 22 October 2019
  • ACTPro by acre security
    Zenitel video devices connect in SIP mode to ACTpro through ACTentry. ==Configuration==
    5 KB (776 words) - 10:01, 12 May 2023
  • IP Hotline Station - 1008070000
    * [[IP Hotline Connections (INCA)|Intercom connections]] ==Configuration==
    2 KB (258 words) - 14:18, 12 February 2024
  • Upload Certificate
    ...describes how to upload a certificate to the Turbine station for use with SIP TLS. *Select '''''SIP Configuration''''' tab and from the left hand menu select '''''Certificates'''''. The Tur
    675 bytes (94 words) - 14:33, 23 November 2020
  • Test report Ascom IP-Dect
    * Caller id: Missing name in intercom display when receiving calls from Dect. The number is shown, but not the na ==== System Configuration ====
    2 KB (275 words) - 15:00, 25 September 2007
  • Cisco Call Manager 10 configuration
    {{S}}This article describes how to add a Stentofon Intercom station to Cisco Unified Call Manager 10. Please note that this is the minimum configuration to get a Turbine station successfully registered to a Cisco Call Manager.
    4 KB (650 words) - 15:30, 13 March 2018
  • Cisco Call Manager 11.5 configuration
    {{S}}This article describes how to add a Zenitel Intercom station to Cisco Unified Call Manager 11.5. Please note that this is the minimum configuration to get a Turbine station successfully registered to a Cisco Call Manager.
    4 KB (650 words) - 16:34, 16 June 2023
  • SIP intercom registration methods
    ==SIP Intercom Registration methods== This article describes the different methods for SIP registration on Zenitel IP stations.
    2 KB (323 words) - 09:25, 22 March 2023
  • Advanced Configuration Mode (SIP)
    ...stem, some additional settings are available when entering the '''Advanced Configuration Mode'''. <br> * Script configuration
    1 KB (148 words) - 11:19, 12 January 2024
  • Permanent Audio Stream
    The configuration web page for '''Permanent Audio''' is hidden: <ipaddress>/goform/zForm_stre ...sible to make only calls created using specified DAKs enable the stream in SIP mode.
    840 bytes (126 words) - 15:50, 25 November 2020
  • Configuration guide for IP Hotline (Pulse)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP stations, see: * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    1 KB (175 words) - 14:50, 30 June 2022
  • Listen in (SIP)
    Turbine stations has a "Listen in" feature in SIP mode. If the station receives “X-Zenitel-Audio: listener” in a SIP INVITE message it means that the call will not be visible in the station an
    1,011 bytes (153 words) - 08:51, 28 September 2017
  • IP Video Door Station - 1401110200
    * [[IP Video Doorstation Connections|Intercom connections]] ==Configuration==
    2 KB (220 words) - 09:41, 16 August 2022
  • ECP-AA1
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    1 KB (172 words) - 12:09, 23 June 2023
  • IP Desktop Station with Video Display - 1408001635
    * [[IP Video Desk Connections|Connecting the Intercom station]] *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (260 words) - 09:25, 16 August 2022
  • SIP phone: Forward unattended call
    ...d SIP calls. In order to work, it requires that the SIP device returns the SIP status "180 Ringing" when the phones starts to ring, and "200 OK" when conn * [[Configuration guide for STENTOFON IP-DECT|IP Dect System 6000]]
    2 KB (278 words) - 12:21, 24 February 2023
  • IP Video Door Station - 1401110100
    * [[IP Video Doorstation Connections|Intercom connections]] ==Configuration==
    2 KB (243 words) - 09:24, 16 August 2022
  • Gallagher
    This article is to describe the configuration of the Zenitel device to work with the Gallagher solution. The Gallagher server acts as a SIP client with no registration.<br>
    2 KB (275 words) - 00:57, 3 February 2023
  • Tetra and ICX-AlphaCom interfacing
    ...d allows point to point calls from individual radio handsets to individual intercom units, and vice versa. ...pressing the M-key (= PTT) on the intercom station. When talking from the intercom station, the PTT of the radio gateway will be operated. Which talk group yo
    2 KB (307 words) - 09:51, 13 February 2024
  • Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000
    * [[IP Sub Connections|Intercom connections]] ==Configuration==
    2 KB (201 words) - 09:20, 16 August 2022
  • OLED Labels
    * In SIP or Edge mode, select '''SIP Configuration''' > '''OLED Labels''' [[Category: Turbine Configuration]]
    1 KB (150 words) - 17:09, 24 March 2021
  • IP Substation Kit - 1008090200
    * [[IP Sub Connections|Intercom connections]] ==Configuration==
    2 KB (214 words) - 09:21, 16 August 2022
  • IP Master Station Kit - 1008093000
    * [[IP Flush Connections|Intercom connections]] ==Configuration==
    2 KB (211 words) - 11:43, 21 November 2023
  • Firewall (IP Stations)
    {{note|[[Advanced Configuration Mode (Edge)|Advanced Configuration Mode]] must be enabled to access the Firewall on the Zenitel IP stations}} | '''SIP''' || || TCP || 5060 || ON
    2 KB (191 words) - 16:22, 12 September 2023
  • IP Heavy Duty Station
    ==Configuration== General configuration:
    2 KB (268 words) - 13:30, 26 June 2023
  • Microsoft Teams - Cybergate integration
    Zenitel TCIS and TCIV+ intercom stations connect to MS Teams through CyberGate SaaS. The stations connect directly to Cybergate in SIP mode.
    2 KB (311 words) - 09:43, 14 April 2023
  • Avaya Communication Server CS1000E
    Configuration guide: [[Avaya-Nortel CS1000 v. 7.6]] [[Category: SIP intercom - iPBX integrations]]
    358 bytes (44 words) - 13:36, 28 February 2019
  • Call and Relay operation by URL
    In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. [[Category: SIP intercom - Configuration]]
    911 bytes (120 words) - 10:01, 13 September 2019
  • IP Hotline Station - 1008070010
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (203 words) - 14:32, 12 February 2024
  • Manually Added Devices (Edge)
    ...devices]]||3rd party SIP||Any 3rd party SIP device (SIP phone, softphone, SIP Speaker etc) must be manually added to the system | [[:category:Pulse - Telephone Gateways|SIP Telephone gateways]]||Gateway||[[GSM Gateway (Edge)|GSM telephone gateway]]
    3 KB (485 words) - 10:37, 9 April 2024
  • Uploading HTTPS certificate
    ...e device is in IC-Edge mode, [[Advanced Configuration Mode (Edge)|Advanced Configuration Mode]], must be enabled}} *Select '''Edge Configuration'''/'''SIP Configuration''' and from the left hand menu select '''Certificates'''. The Turbine certi
    2 KB (264 words) - 11:23, 20 March 2024
  • SIP registrar node - configuration
    ...nged, and SIP Registrar node is no longer needed. Please see the article [[SIP phone as station]]''.}} ...ed in one exchange. The SIP registrar node receives REGISTER messages from SIP clients and maintains a list of currently registered clients.
    4 KB (569 words) - 09:35, 16 April 2019
  • Weather and Vandal Resistant IP Substation - 1008042100
    * [[IP Sub Connections|Intercom connections]] ==Configuration==
    2 KB (204 words) - 09:52, 16 August 2022
  • Language Settings (SIP)
    ...''' settings, you must enable [[Advanced Configuration Mode (SIP)|Advanced Configuration Mode]]}} Select '''SIP Configuration''' > '''Language'''. Download the english (or french) version of the langua
    1 KB (212 words) - 12:06, 19 May 2021
  • TEIV-1+
    {{AEIS}}[[file:TEIV-1+ Front.png|right|300px|thumb|Turbine Extended IP Video Intercom with Keypad and Display<br>(1008317110)]] ==Configuration==
    2 KB (229 words) - 17:21, 22 January 2024
  • IP Desktop Master Station - 1008000000
    * [[IP Desk Connections|Connecting the Intercom station]] *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (236 words) - 14:04, 2 May 2023
  • SIP number translation table (AlphaCom)
    ...CSV file, which is used for number translation on incoming and/or outgoing SIP Trunk calls. ...rce of the caller (Caller ID) to be the public phone number instead of the intercom station number.
    3 KB (496 words) - 12:17, 24 February 2023
  • Dynamic Range Compression (DRC)
    For intercom devices and IP Speakers the DRC will normally have a good effect on regular Configuration is done from the Audio Settings menu. First enable '''Advanced Configuration''' mode. Depending on the mode of operations, select:
    2 KB (330 words) - 14:28, 9 November 2023
  • IP Desktop Master Station - 1008001000
    * [[IP Desk Connections|Connecting the Intercom station]] *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (240 words) - 14:05, 2 May 2023
  • Transparent Mode DAK-Key Configuration
    ...), the dialed digits are sent transparent through the AlphaCom, out on the SIP Trunk. ...example if one wants to make a [[Inquiry Call feature|call transfer]] (2 + intercom number + 3) or [[Blind Transfer During Connection|blind transfer]] after th
    2 KB (279 words) - 12:16, 23 February 2023
  • Genetec Sipelia - ICX-AlphaCom integration
    ...ty Center Software to ICX-AlphaCom or AlphaCom XE and intercom stations in SIP-mode. Sipelia is a small IPBX. Security Center operator positions have a SIP-client which register with Sipelia.
    2 KB (302 words) - 15:07, 26 June 2023
  • TEIV-4+
    {{AEIS}}[[file:TEIV-4+ Front.png|right|300px|thumb|Turbine Extended IP Video Intercom with RFID card space<br>(1008318240)]] == Configuration ==
    2 KB (219 words) - 12:36, 28 November 2023
  • Clean room intercom station IP-CROR
    The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean rooms. * [[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (233 words) - 15:09, 30 April 2024
  • Weather and Vandal Resistant IP Substation - 1008041100
    * [[IP Sub Connections|Intercom connections]] ==Configuration==
    2 KB (219 words) - 13:31, 26 June 2023
  • Keyboard Settings
    * Select '''SIP Configuration''' -> '''Keyboard''' (SIP mode), or * Select '''Advanced SIP''' > '''Keyboard''' (SIP mode), or
    2 KB (267 words) - 13:34, 23 November 2020
  • Volume and handset override (SIP)
    ...e and handset override can be activated when receiving [[Multicast Paging (SIP)|Multicast Paging]] by setting the Priority = Emergency. [[Category: SIP intercom - Configuration]]
    642 bytes (99 words) - 15:25, 12 September 2019
  • IP Master Station Kit - 1008493000
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    1 KB (170 words) - 15:15, 23 June 2023
  • Configuration guide for IP Heavy Duty (SIP)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP stations, see: * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    4 KB (557 words) - 14:49, 30 June 2022
  • Time Settings (SIP)
    * Select '''SIP Configuration > Time Settings''' from the menu [[File:SIP-Time Trbn.PNG|thumb|left|500px|Time Setting in a Turbine station]]
    1 KB (186 words) - 14:27, 23 November 2020
  • VLAN Tagging (IEEE 802.1Q)
    [[IP Station VLAN Configuration Guide]] [[Category:INCA Station Configuration Guide]]
    901 bytes (130 words) - 08:12, 5 April 2022
  • Vandal Resistant intercom - VR3G-1
    ==Configuration== General configuration:
    2 KB (230 words) - 15:47, 8 September 2023
  • IP Desk Master -V2
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (207 words) - 13:37, 29 January 2024
  • IP Desk Master -V2-P
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (209 words) - 13:37, 29 January 2024
  • ENA2060 Amplifier
    ...enable the use of the same software for handling both Passenger Emergency Intercom / Crew Communication and Public Address (PA), as well as the required Train ==Configuration==
    2 KB (270 words) - 09:55, 16 August 2022
  • Active Noise Cancellation (ANC)
    ...ture is by '''default active''', hence there is normally no need to do any configuration. ...the [[Edge Controller]], and navigate to '''Edge Controller''' > '''System Configuration''' > '''Call and Audio'''. The ANC feature can be disabled (or enabled) per
    3 KB (380 words) - 15:31, 25 October 2023
  • ELSII-10H
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (204 words) - 12:51, 23 June 2023
  • IP Desk Master -V2 w/handset
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (222 words) - 13:49, 29 January 2024
  • Door Opening feature (Edge)
    ...Door Stations by default are configured to trigger on DTMF "6", no special configuration is required for the Door Opening feature. ...to use, or the pulse time of the relay, from the web interface of the door intercom station:
    1 KB (180 words) - 12:34, 16 September 2019
  • ELSIR-10C
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (206 words) - 12:51, 23 June 2023
  • TKIS-2
    ...ed TKIS-2 Turbine Kit VoIP Intercom Module can be used to build customized intercom or help point solutions. It is also used as an interface towards external P ==Configuration==
    2 KB (292 words) - 14:51, 29 January 2024
  • TKIV+
    {{AEIS}}[[file:TKIV+-newZ.png|right|300px|thumb|Turbine Video & VoIP Intercom Module<br>(1008331010)]] The TKIV+ VoIP kit enables you to build your own IP Intercom video station or Help-Point with HD camera.
    2 KB (336 words) - 14:44, 29 January 2024
  • Virtual I/O (SIP)
    * Script Configuration ...tations#Turbine_stations|Turbine station]] operating in '''Pulse''' and '''SIP''' mode.
    3 KB (457 words) - 09:51, 7 January 2020
  • IP Desk Master -V2-P w/handset
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (229 words) - 13:47, 29 January 2024
  • IP Flush Master - Call Queuing (SIP)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP Flush Master station, see: * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (395 words) - 13:29, 12 September 2022
  • IPVRS-1
    ==Configuration== General configuration:
    2 KB (244 words) - 12:27, 29 January 2024
  • Backup and Restore (IP Stations)
    ...the web interface of the station it is possible to backup and restore the configuration data. == Download XML Configuration File ==
    2 KB (247 words) - 12:06, 5 October 2023
  • TFIX-4
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (239 words) - 09:54, 16 August 2022
  • IP Flush Master -V2
    * [[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (312 words) - 14:00, 29 January 2024
  • IP Dual Display Station - 1008007000
    {{Note|When used in IC-Edge, Pulse or SIP mode, only 10 Direct Access Keys are supported }} * [[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (301 words) - 12:51, 28 November 2023
  • TFIE-6
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (230 words) - 12:52, 28 November 2023
  • TCIA-2
    The TCIA-2 is an IP based intercom with an analog front board intended for areas where exposure of the physica {{AEIPS}}[[file:TCIS-2newZ.png|200px|thumb|Analog over IP Intercom<br>(1008113020)|alt=]]
    3 KB (379 words) - 15:12, 29 January 2024
  • IP OR Master Station - 1008015000
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (250 words) - 14:06, 2 May 2023
  • TCIS-6
    ==Configuration== General configuration:
    2 KB (230 words) - 12:47, 28 November 2023
  • TCIS-4
    ==Configuration== General configuration:
    2 KB (230 words) - 12:46, 28 November 2023
  • TCIS-5
    ==Configuration== General configuration:
    2 KB (230 words) - 12:46, 28 November 2023
  • IP Heavy Duty Station V2
    ==Configuration== General configuration:
    2 KB (269 words) - 14:37, 29 January 2024
  • Door Opening feature (Pulse)
    ...Door Stations by default are configured to trigger on DTMF "6", no special configuration is required for the Door Opening feature. ...to use, or the pulse time of the relay, from the web interface of the door intercom station:
    1 KB (201 words) - 16:35, 12 September 2019
  • Vandal Resistant intercom - VR3G-1P
    ==Configuration== General configuration:
    2 KB (274 words) - 09:35, 7 March 2024
  • TMIS-2
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (224 words) - 12:50, 28 November 2023
  • Automatic Gain Control (AGC)
    ...ariations in the speech level because the talker is at a distance from the intercom station, or talking with a low voice. The AGC feature is providing more amp ...the [[Edge Controller]], and navigate to '''Edge Controller''' > '''System Configuration''' > '''Call and Audio''', and enable/disable "'''AGC'''" per device:
    3 KB (439 words) - 15:57, 25 October 2023
  • Configuration guide for IP Heavy Duty (Pulse)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP stations, see: * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    4 KB (625 words) - 14:49, 30 June 2022
  • Tone Test (SIP)
    ...sing SNMP traps, which must be turned on in the [[SNMP in IP Stations|SNMP configuration]]. * Enable [[Advanced Configuration Mode (SIP)|Advanced Configuration Mode]]
    3 KB (491 words) - 10:59, 9 April 2021
  • ENA2400-AC Amplifier
    == Configuration == * [[ENA Amplifier - Basic configuration (AlphaCom mode)|Getting started (AlphaCom mode)]]
    3 KB (484 words) - 15:30, 29 February 2024
  • TFIE-1
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (216 words) - 12:52, 28 November 2023
  • TFIE-2
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (216 words) - 12:52, 28 November 2023
  • Asterisk configuration
    =Asterisk Configuration(CHAN_SIP)= ==Configuration with UDP/TCP transport protocol and video support==
    5 KB (735 words) - 15:07, 6 August 2020
  • ECPIR-3P
    ==Configuration== General configuration:
    3 KB (315 words) - 14:21, 31 January 2024
  • ECPIR-P
    ==Configuration== General configuration:
    3 KB (313 words) - 14:26, 31 January 2024
  • ENA2200 Amplifier
    == Configuration == * [[ENA Amplifier - Basic configuration (AlphaCom mode)|Getting started (AlphaCom mode)]]
    3 KB (500 words) - 15:29, 29 February 2024
  • ENA2400-DC Amplifier
    == Configuration == * [[ENA Amplifier - Basic configuration (AlphaCom mode)|Getting started (AlphaCom mode)]]
    3 KB (494 words) - 09:52, 16 August 2022
  • Far End Signal Squelch (FESS)
    ...the feature is done from the Audio Settings menu. First enable '''Advanced Configuration''' mode. Depending on the mode of operations, select: *Edge mode: '''Edge Configuration''' > '''Audio Settings''' > '''Audio signal processing'''
    2 KB (346 words) - 14:01, 7 November 2023
  • TCIV-6
    ==Configuration== General configuration:
    2 KB (294 words) - 16:09, 23 June 2023
  • TFIX-1
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (245 words) - 09:48, 16 August 2022
  • TFIX-2
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (245 words) - 09:48, 16 August 2022
  • TFIX-3
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (245 words) - 09:47, 16 August 2022
  • TMIV-1+
    == Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (260 words) - 17:20, 24 November 2023
  • IP Flush Master - 1008031000
    *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    3 KB (361 words) - 14:05, 2 May 2023
  • Button and LED configuration for customized stations (SIP)
    * Button and LED configuration is supported in [[:Category:Stations#Turbine_stations|Turbine intercoms]], * The station must be in Pulse, IC-Edge or SIP mode.
    2 KB (235 words) - 13:06, 20 October 2020
  • TCIV-2
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (281 words) - 16:08, 23 June 2023
  • TCIV-3
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (280 words) - 16:09, 23 June 2023
  • TMIS-4
    == Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (223 words) - 12:50, 28 November 2023
  • TMIS-1
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (223 words) - 12:50, 28 November 2023
  • TCIS-2
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (217 words) - 12:38, 28 November 2023
  • TCIS-3
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (217 words) - 12:46, 28 November 2023
  • TCIV-6+
    == Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (301 words) - 14:25, 7 February 2024
  • Main Page
    ...,Vingtor-Stentofon,AlphaWikiZenitelWiki, ICX, Alphacom, IC-Edge, Pulse and SIP ...ical information about the platforms ICX, AlphaCom, IC-Edge, Pulse and SIP Intercom.
    7 KB (815 words) - 11:50, 29 February 2024
  • TCIS-C1
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (217 words) - 12:47, 28 November 2023
  • TCIV-5+
    == Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (302 words) - 15:01, 5 February 2024
  • ZMK-1
    ==Configuration== General configuration:
    2 KB (284 words) - 13:27, 25 October 2023
  • TCIV-5
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (286 words) - 16:09, 23 June 2023
  • Schneider Security Expert - IC-EDGE integration
    ...d how to program Security Expert to integrate Zenitel intercom devices via SIP communication. *An SX-SIP-10 license for Security Expert.
    7 KB (1,063 words) - 12:41, 23 August 2022
  • TCIV-2+
    == Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (291 words) - 15:00, 5 February 2024
  • ENA2100-AC Amplifier
    ==Configuration== *[[ENA Amplifier - Basic configuration (AlphaCom mode)|Getting started (ICX-AlphaCom mode)]]
    3 KB (513 words) - 09:52, 16 August 2022
  • TCIV-3+
    == Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (291 words) - 15:01, 5 February 2024
  • TCIS-1
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (225 words) - 12:38, 28 November 2023
  • CEM Systems AC2000 - ICX-AlphaCom integration
    ...CX/AlphaCom intercom servers and workstations, as well as their respective intercom devices. *SWINT-ALPHA Stentofon AlphaCom Intercom Interface
    6 KB (902 words) - 10:15, 15 August 2022
  • X-Lite softphone
    [[Image:X-Lite 4.7 SIP Configuration.PNG|left|350px|thumb|SIP account configuration]] ...be defined in AlphaCom as a [[SIP_phone_as_station#AlphaCom_Configuration|SIP Station]].
    4 KB (669 words) - 10:12, 16 August 2022
  • Grandstream Wave Lite mobile app
    ...s. The application is free. It enables you to use your mobile device as an intercom station in the IC-EDGE system. * Supports 2-way video calls based on SIP & H.264 video codec
    5 KB (819 words) - 11:22, 20 February 2023
  • IP Flush Master - Call Queuing (Pulse)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP Flush Master station, see: * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (402 words) - 14:50, 30 June 2022
  • Configuration guide for IP Heavy Duty (Edge)
    ...he configuration is done via the web interface of the station. For general configuration and setup of IP stations, see: * [[Getting Started (IC-Edge)|IP Station Configuration - Edge mode]]
    4 KB (634 words) - 14:52, 30 June 2022
  • Display Setup Menu (IP Stations)
    ...Master Station is not configured or not registered to a server, an offline configuration menu is available. The offline menu can be used to configure the station an ...x.x.x and newer), no further configuration is required in the station. All configuration (including IP address and directory number) is configured from the [[Edge C
    4 KB (651 words) - 13:16, 24 November 2020
  • IMT - Basic Intercom System Setup
    The procedure for deploying IP-intercom stations is # Discovery of intercom devices
    15 KB (2,159 words) - 15:57, 16 August 2022
  • Acoustic Echo Cancellation (AEC)
    Configuration is done from the Audio Settings menu. First enable '''Advanced Configuration''' mode. Depending on the mode of operations, select: *Edge mode: '''Edge Configuration''' > '''Audio Settings''' > '''Audio signal processing'''
    3 KB (430 words) - 15:33, 25 October 2023
  • TKIE-3
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (305 words) - 15:22, 23 June 2023
  • Linked Edge Controllers
    ...dge Controller]]". The Edge Controller is acting as a server for the other intercom stations in the system. Most Zenitel IP devices can act as an Edge Controll * UDP port 5060 for SIP
    4 KB (626 words) - 11:32, 2 June 2022
  • Relay Settings (SIP)
    To configure relay operation, select '''SIP Configuration''' > '''Relay/Outputs'''. ...ve), or '''Use Advanced Output Handler''': The "[[Advanced Output Handler (SIP)|Advanced Output Handler]]" makes it possible to better customize the relay
    3 KB (429 words) - 09:43, 27 February 2024
  • VSIS-4.11 Release
    A [[:Category:VSIS Packages|VSIS Package]] is a collection of software for intercom solutions. == Vingtor-Stentofon Intercom Suite 4.11 ==
    5 KB (714 words) - 13:13, 16 August 2022
  • IP-LCM
    ==Configuration== General configuration:
    3 KB (405 words) - 14:47, 22 April 2024
  • TFIX-2-V2
    * Ex IP intercom for potentially explosive atmospheres - Directive 2014/34/EU == Configuration ==
    3 KB (344 words) - 12:22, 29 January 2024
  • TFIX-3-V2
    * Ex IP intercom for potentially explosive atmospheres - Directive 2014/34/EU == Configuration ==
    3 KB (345 words) - 12:21, 29 January 2024
  • TFIX-1-V2
    * Ex IP intercom for potentially explosive atmospheres - Directive 2014/34/EU ==Configuration==
    3 KB (344 words) - 12:17, 29 January 2024
  • TKIE-3CC
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (325 words) - 12:22, 23 June 2023
  • TKIE-2
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (308 words) - 14:50, 29 January 2024
  • TKIE-1
    ==Configuration== * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    2 KB (312 words) - 12:22, 23 June 2023
  • Web Call and HTTP commands (SIP)
    ...disabled. To enable, access the Webcall interface by selecting '''Advanced SIP''' > '''Webcall''', and check the flag '''Enable Web Call and Relay'''}} ...the Webcall interface when the station is in SIP mode, select '''Advanced SIP''' > '''Webcall'''.
    5 KB (706 words) - 16:41, 23 November 2020
  • I/O Settings (SIP)
    ...Configuration Mode (SIP)|Advanced Configuration]] mode, and select '''SIP Configuration > I/O''' from the menu [[File:SIP IOs.PNG|thumb|left|700px|The I/O settings page]]
    3 KB (465 words) - 11:17, 12 January 2024
  • Account Settings (SIP)
    == Main SIP account settings == ...iguration''' > '''Account / Call''' to access the page for configuring the SIP Account Settings.
    7 KB (1,047 words) - 14:56, 9 January 2023
  • ITSV-1 (Pulse)
    This article describes how to set up the IP Video intercom '''ITSV-1''' to operate in a '''PULSE system'''. The phone can be used for ...e you need to upgrade the firmware, else the ITSV-1 station will require a SIP Phone license.
    11 KB (1,664 words) - 17:18, 11 March 2019
  • Automatic Volume Control (AVC)
    ...the [[Edge Controller]], and navigate to '''Edge Controller''' > '''System Configuration''' > '''Call and Audio''', and enable "'''AVC'''": === SIP mode ===
    4 KB (605 words) - 13:58, 16 November 2023
  • IP Telephony Service (ICX-AlphaCom)
    ...he ICX-AlphaCom can access the public telephony network by connecting to a SIP Service Provider on the internet. * Easy configuration
    7 KB (1,036 words) - 10:22, 14 March 2023
  • SIP Headers
    Zenitel IP stations support a selection of custom SIP headers to manipulate aspects of the call. These headers must be included i If the station receives “'''X-Zenitel-Audio: listener'''” in a SIP INVITE message it means that the call will not be visible in the station an
    3 KB (482 words) - 09:45, 6 February 2024
  • Logging - IP Stations
    {{note|[[Advanced Configuration Mode (Edge)|Advanced Configuration Mode]] must be enabled to access the Logging on the Zenitel IP stations}} * Enable [[Advanced Configuration Mode (Edge)|Advanced Configuration Mode]]
    6 KB (865 words) - 09:32, 27 February 2024
  • VS-IMT VS-SDK for Pulse System Setup
    The VS-SDK for Pulse-enabled project lets you set up an intercom system project using our special Zenitel Application Protocol (ZAP). This t * Perform basic configuration of stations
    9 KB (1,460 words) - 11:36, 29 June 2023
  • Main Settings (IP Stations)
    [[File:SIP Main.PNG|thumb|left|700px]] '''Station Mode:''' Select one of the available modes: ICX-AlphaCom, Exigo, SIP, Edge and Edge Controller.
    3 KB (396 words) - 13:11, 12 January 2024
  • SIP Intercom - Web Interface
    [[File:SIP User diagram.PNG|thumb|400px|SIP based System]] ...ces can be configured to operate in ''SIP Mode'', and can be used with any SIP based iPBX or Call Manager.
    9 KB (1,402 words) - 13:12, 12 January 2024
  • Configuration of the VR3G-1 and VR3G-1P
    ...tions [[Vandal Resistant intercom - VR3G-1|VR3G-1]] and [[Vandal Resistant intercom - VR3G-1P|VR3G-1P]]: ...re the station, depends on the mode of operation (ICX-AlphaCom, IC-Edge or SIP mode).
    5 KB (848 words) - 16:01, 7 September 2023
  • Multicast Paging (SIP)
    '''Multicast Paging''' enables IP intercom stations in SIP mode to receive VoIP audio as multicast paging from 3rd party iPBX (e.g. As * ''Multicast Paging is supported in '''SIP mode''' only''
    6 KB (858 words) - 15:49, 25 October 2023
  • INCA 2.8 - Release Notes
    ...s a firmware archive for all [[:Category:Stations#INCA_stations|INCA based Intercom stations]] including devices: * A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
    4 KB (643 words) - 14:31, 28 February 2019
  • IP Station VLAN Configuration Guide
    ===Configuration steps=== ...d by VLAN. For firmware 2.11 and higher, you will need to enable Advanced Configuration mode.
    5 KB (903 words) - 10:28, 3 January 2024
  • Avaya-Nortel CS1000 v. 7.6
    ...r 1000E R7.6 to interoperate with Zenitel Stentofon Turbine Intercom using SIP Line Gateway- Issue 0.1 ...s call scenarios with other Avaya telephones and Zenitel Stentofon Turbine Intercom units.
    11 KB (1,465 words) - 11:50, 17 March 2017
  • Licensing in IC-EDGE
    *[[Configure 3rd party SIP devices (Edge)|3rd Party SIP devices]]. Maximum 10 devices. |Intercom Extension||1009661001||License for additional Vingtor-Stentofon devices bey
    3 KB (448 words) - 11:05, 24 October 2023
  • SIP phone as station
    {{A}}[[File:SIP phones.PNG|thumb|right|500px|AlphaCom XE as SIP Server]] ...XE server, and shows a feature comparison between SIP users and STENTOFON intercom stations.
    10 KB (1,521 words) - 12:00, 27 February 2023
  • VS-SDK for Pulse - Release Notes
    ===MTN-1234 VS-SDK support for stations in SIP mode === ...l Device service. Configuration from VS-IMT was also added for stations in SIP mode as part of the VS-SDK for Pulse project type.
    2 KB (285 words) - 15:12, 27 January 2020
  • Milestone XProtect - IC-Edge Integration
    ...r softclient to be associated with the Milestone XProtect Smart Client, as SIP audio is routed through IC-Edge. *that IC-EDGE is operational, with all the system connected intercom devices and softclients configured
    7 KB (1,109 words) - 14:13, 22 March 2024
  • ITSV-1 (Edge)
    == Edge Controller configuration == * From the menu '''Edge Controller''' > '''System Configuration''' > '''Directory''', under the '''Manually Added Devices''' section, press
    12 KB (1,807 words) - 12:23, 10 July 2020
  • Akuvox R29S (Edge)
    == Edge Controller configuration == ...o the Edge Controller. [https://wiki.zenitel.com/wiki/Licensing_in_IC-EDGE SIP Client Extension license] is required.
    8 KB (1,326 words) - 09:52, 6 July 2022
  • Password (IP Stations)
    [[Category: IC-EDGE Configuration]] [[Category: Pulse - Configuration]]
    2 KB (259 words) - 16:06, 25 May 2023
  • Wireshark - capture data
    *'''Unmanaged switches''' — These switches have no configuration interface or options. They are plug and play. They are typically the least [[Category: ICX-AlphaCom - SIP Integration]]
    3 KB (526 words) - 12:15, 23 February 2023
  • Mediatrix 1204
    == Configuration from Web Interface == ...associated with the unit. The recovery mode does not alter any persistent configuration data of the Mediatrix Gateway.
    10 KB (1,475 words) - 17:39, 11 February 2017
  • Address Book
    *In SIP mode, select '''SIP Configuration''' > '''Address Book''' or *In Edge mode, select '''Edge Configuration''' > '''Address Book'''
    4 KB (661 words) - 17:10, 24 March 2021
  • Substations calling external telephone(s)
    * If all lines in the SIP gateway are busy, the '''call will be queued'''. When the line becomes free {{Note|The ICX-AlphaCom and SIP Gateway must be configured to use '''One Stage''' (Enbloc) dialing to achie
    9 KB (1,398 words) - 12:28, 24 February 2023
  • Akuvox R29S (ICX-Alphacom)
    * The Akuvox R29S requires a [[Licenses#SIP_station_license|SIP Station license]] in the ICX-AlphaCom server. == ICX-Alphacom server configuration ==
    11 KB (1,727 words) - 12:05, 23 February 2023
  • ITSV-5 (Edge)
    ...er of Zenitel devices in the system is 32 or less. For devices above 32 an Intercom Extension license (1009661001) is required. == Edge Controller configuration ==
    12 KB (1,843 words) - 09:44, 1 February 2024
  • Mobotix Hub - IC-EDGE Integration
    ...top station or softclient to be associated with the MOBOTIX HUB client, as SIP audio is routed through IC-Edge. *that IC-EDGE is operational, with all the system connected intercom devices and softclients configured
    6 KB (977 words) - 13:26, 14 September 2023
  • Virtual IO - Examples
    * Select '''SIP Configuration''' > '''Script Upload''', and click '''Browse''' to upload the script to th ...t with the required parameters. Select '''SIP Configuration''' > '''Script Configuration'''
    6 KB (881 words) - 15:22, 15 December 2022
  • ITSV-4 (Edge)
    ...er of Zenitel devices in the system is 32 or less. For devices above 32 an Intercom Extension license (1009661001) is required. == Edge Controller configuration ==
    13 KB (2,015 words) - 11:30, 24 October 2023
  • IP Telephony Service (Edge)
    <!-- [[File:Sipservice_edge.png|thumb|400px|The IC-EDGE System connects to a SIP trunk provider]] --> ...itional hardware such as MP-114 gateways. The IC-EDGE System connects to a SIP Service Provider on the internet which gives access to public telephony cal
    9 KB (1,446 words) - 17:35, 10 January 2024
  • Avaya Aura CM 7.1 configuration
    ...the Avaya section and with the standard web interface for Turbine station configuration (we recommend Firefox or Chrome). *Configure SIP User
    14 KB (2,029 words) - 23:06, 23 April 2018
  • Distributed Automatic Volume Control (DAVC) (SIP)
    ...ting while audio is actively playing at the AVC Receiver. With the default configuration, it needs minimum 100ms of silence to be able to adjust the gain by 1dB. Th == Configuration ==
    6 KB (873 words) - 17:14, 18 October 2023
  • What's new
    VSIS is an intercom solution software product package. The package includes: ...firmware for [[:Category:Stations#Turbine_stations|Turbine generation]] of intercom devices: TCIS-x, TKIS-2, TMIS-x, TFIE-x, TKIE-x, TFIX-x, TCIV-x, ECPIR-3P a
    7 KB (1,100 words) - 15:36, 11 March 2019
  • SDS-1
    # Using the web configuration interface or the keypad configuration menu, you can further configure the phone using either a static IP or DHCP. ==Configuration==
    5 KB (885 words) - 11:16, 14 February 2024
  • VSIS-4.7 Release
    VSIS is an intercom solution software product package. The package includes: ...firmware for [[:Category:Stations#Turbine_stations|Turbine generation]] of intercom devices: TCIS-x, TKIS-2, TMIS-x, TFIE-x, TKIE-x, TFIX-x, TCIV-x, ECPIR-3P a
    7 KB (1,103 words) - 11:56, 5 April 2019
  • Pulse Licensing
    |1 x Intercom Extension||1009661001||License for one IP Intercom. Note that the first 16 stations do not require any license |6 x Intercom Extensions||1009661006||License for 6 pcs of IP Intercoms. Note that the fi
    5 KB (796 words) - 16:30, 8 February 2023
  • ITSV-2 (Edge)
    ...er of Zenitel devices in the system is 32 or less. For devices above 32 an Intercom Extension license (1009661001) is required. == Edge Controller configuration ==
    14 KB (2,256 words) - 10:55, 30 June 2022
  • Avaya IP Office 10.1 configuration
    Configuration and verification operations on the Avaya IP Office and Vingtor-Stentofon Tu For all other provisioning information such as initial installation and configuration, please refer to the product documentation.
    18 KB (2,628 words) - 10:19, 24 April 2018
  • ELSII-10HM
    == Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    4 KB (632 words) - 12:15, 24 October 2023
  • INCA 2.11 - Release Notes
    ...a firmware archive for all [[:Category:Stations#INCA_stations|INCA Family Intercom stations]] including devices: ==New Features - INCA Intercom==
    5 KB (854 words) - 05:24, 8 March 2022
  • ELSII-10WM
    == Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    4 KB (640 words) - 12:15, 24 October 2023
  • ELSII-10LHM
    == Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    4 KB (638 words) - 12:15, 24 October 2023
  • GSM gateway (Mobile VoIP)
    *'''AlphaCom''': [[Licenses#SIP_trunk_license|License for SIP Trunk, 100 9642 001]]. One license for each connected gateway. *'''ICX''': [[Licenses for ICX-500 and ICX-AlphaCom Core|ILI-SIP2 SIP Trunking, 2 lines, 1002602101]]. One license can serve two gateways.
    12 KB (1,892 words) - 15:14, 16 April 2024
  • Logging into an Zenitel IP Device
    The '''Station Information''' page will now be displayed, showing the IP configuration and status. [[Category: IC-EDGE Configuration]]
    3 KB (470 words) - 11:03, 26 May 2023
  • GSM Gateway (Pulse)
    == PULSE Configuration == Before a SIP Gateway Account can be created on the Pulse Server, you need to obtain the
    8 KB (1,249 words) - 13:17, 19 May 2020
  • IPv6 (SIP)
    IPv6 protocol is currently supported on all Turbine stations in SIP mode running image 5.1 3.x and above. IPv6 protocol is currently not suppor A station in SIP mode will show assigned IPv6 address on Main Information page. If private o
    9 KB (1,391 words) - 16:01, 6 March 2020
  • ITSV-3 (Edge)
    ...er of Zenitel devices in the system is 32 or less. For devices above 32 an Intercom Extension license (1009661001) is required. == Edge Controller configuration ==
    15 KB (2,356 words) - 14:27, 3 November 2022
  • Cisco Call Manager 6 configuration guide
    This article describes how to set up Cisco Call Manager 6 with IP phones and SIP trunk line to AlphaCom.<br> * SIP Intercom
    15 KB (2,262 words) - 12:36, 15 August 2022
  • ELSII-10PM
    == Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    4 KB (660 words) - 12:15, 24 October 2023
  • ELSIR-10CM
    == Configuration == * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    4 KB (652 words) - 12:14, 24 October 2023
  • ITSV-1 (ICX-AlphaCom)
    This article describes how to set up the '''ITSV-1''' Video Intercom to operate in a '''ICX or AlphaCom system'''. The ITSV can be used for audi *'''ICX system''': SIP station license (1002600700 ILS-SIP)
    13 KB (2,014 words) - 15:10, 16 March 2023
  • Pulse System Configuration
    ...d web browser (like Firefox or Chrome), or one can use the dedicated [[IMT|Intercom Management Tool IMT]]. ..."'''Pulse Server'''". The Pulse Server is acting as a server for the other intercom stations in the system. Any station can be a Pulse Server. However, more fe
    16 KB (2,446 words) - 14:15, 3 March 2022
  • Turbine 6.2 - Release notes
    ...mware archive for all [[:Category:Stations#Turbine_stations|Turbine Family Intercom stations]] including devices: ...ers''' (only SIP mode and ICX- AlphaCom mode), and '''ENA-2060''' (only in SIP mode)
    6 KB (936 words) - 10:18, 23 June 2022
  • Web Call and HTTP commands (Pulse)
    An intercom station can be controlled from external applications, e.g. a web browser, u {{obs|'''HTTP commands''' are supported in '''Pulse''' mode and in '''SIP''' mode}}
    5 KB (704 words) - 09:51, 7 January 2020
  • Call Settings (SIP)
    ==Call Settings configuration== Select '''SIP Configuration''' > '''Account/Call''' to access the '''Call Settings''' page.
    10 KB (1,567 words) - 10:12, 22 February 2024
  • Pulse System Description
    The Vingtor-Stentofon Pulse system is a SIP intercom system intended for small to mid-size installations for up to 64 IP station *SIP Gateway interface that is easy to setup (e.g. SIP-to-GSM, SIP-to-PSTN, etc.)
    12 KB (1,790 words) - 09:57, 18 August 2023
  • Pulse Licensing - Generation 1 and 2
    === SIP Phone === This license enables the use of 3rd party SIP telephones. Up to 10 SIP phones are supported.
    6 KB (770 words) - 14:40, 6 July 2022
  • INCA 2.10 - Release Notes
    ...a firmware archive for all [[:Category:Stations#INCA_stations|INCA Family Intercom stations]] including devices: ==New Features - INCA Intercom ==
    8 KB (1,185 words) - 09:44, 18 February 2020
  • Video Settings
    * '''IC-Edge mode''': ''Edge Configuration'' > ''Video'' * '''SIP mode''': ''SIP Configuration'' > ''Video''
    6 KB (892 words) - 11:26, 24 January 2024
  • GSM Gateway (Edge)
    == Edge Controller configuration == === Create a SIP Account ===
    14 KB (2,208 words) - 16:40, 11 January 2024
  • Getting Started (ICX-AlphaCom)
    ...w how to set up an ICX-500 server, a Desktop station and a Help Point/Door intercom. ...includes how to configure relay for Door Opening and how to set up a Video Intercom (ITSV).
    9 KB (1,490 words) - 12:56, 26 February 2024
  • Audio Messaging (SIP)
    * Audio Messaging services are supported when the station operates in SIP, Pulse or Edge mode. * Select '''Station Configuration''' > '''Audio Messages'''.
    13 KB (2,116 words) - 15:25, 6 August 2020
  • ITSV-2 (ICX-AlphaCom)
    This article describes how to set up the '''ITSV-2''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for aud *'''ICX system''': SIP station license (1002600700 ILS-SIP)
    15 KB (2,319 words) - 13:00, 17 August 2023
  • ITSV-4 (ICX-AlphaCom)
    This article describes how to set up the '''ITSV-4''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for aud *'''ICX system''': SIP station license (1002600700 ILS-SIP)
    15 KB (2,349 words) - 15:28, 6 November 2023
  • LenelS2 OnGuard - IC-EDGE Integration
    == Installation and Configuration== ...capabilities available in the integrated system that require some special configuration. These are described in the rest of the chapter.
    12 KB (1,878 words) - 16:12, 15 August 2022
  • Multicast Paging (Edge)
    '''Multicast Paging''' enables IP intercom stations in Edge mode to receive VoIP audio as multicast paging from 3rd pa == Configuration ==
    5 KB (764 words) - 15:49, 25 October 2023
  • ITSV-5 (ICX-AlphaCom)
    This article describes how to set up the '''ITSV-5''' Video Intercom to operate in an '''ICX-AlphaCom or AlphaCom XE system'''. The ITSV can be *'''ICX-AlphaCom system''': SIP station license (1002600700 ILS-SIP)
    15 KB (2,352 words) - 15:28, 6 November 2023
  • Turbine 7.3 - Release notes
    ...mware archive for all [[:Category:Stations#Turbine_stations|Turbine Family Intercom stations]] including devices: ...e), ENA2200-AC2, ENA2400-AC2 (ICX AlphaCom mode) and ENA2060-DC1 (only in SIP mode)
    6 KB (1,015 words) - 14:14, 1 February 2023
  • Call Settings (Edge)
    == Call Settings configuration== Select '''Edge Configuration''' > '''Account/Call''' to access the page for configuring Call Settings.
    9 KB (1,444 words) - 14:05, 12 January 2024
  • IP Desktop - Video Module Configuration
    **When used in '''SIP''' or '''Pulse''' mode: Enter "0". **When used in '''AlphaCom''' mode: Enter the directory number of the door intercom with camera.
    10 KB (1,536 words) - 17:13, 12 November 2020
  • ITSV-3 (ICX-AlphaCom)
    This article describes how to set up the '''ITSV-3''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for aud *'''ICX system''': SIP station license (1002600700 ILS-SIP)
    16 KB (2,396 words) - 13:00, 17 August 2023
  • Audio Messaging (Pulse)
    * Audio Messaging services are supported when the station operates in SIP, Pulse or Edge mode. * Select '''Station Configuration''' > '''Audio Messages'''.
    13 KB (2,114 words) - 10:44, 24 November 2021
  • Microsoft Teams - ICX-AlphaCom Integration
    This article describes how you connect intercom audio calls to Microsoft Teams, by connecting ICX-Alphacom to the Microsoft ...ential ringing, which means multiple Teams users in the company can answer intercom calls from i.e. doors
    12 KB (1,927 words) - 09:47, 16 February 2023
  • Network guidelines
    ...ide the voice of security. This article includes descriptions of setup and configuration, operation, and any limitations and/or notes surrounding the solution. The It is recommended to use a dedicated VLAN for the intercom system. Grouping users into logical networks will increase performance by l
    6 KB (905 words) - 10:42, 24 January 2024
  • Getting Started (IC-Edge)
    The IC-EDGE system is a SIP intercom system intended for small to mid-size installations for up to 64 IP station ...dge Controller]]". The Edge Controller is acting as a server for the other intercom stations in the system. Most Zenitel IP devices can act as an Edge Controll
    12 KB (1,742 words) - 12:26, 15 January 2024
  • Call Settings (Pulse)
    == Call Settings configuration== Select '''SIP Configuration''' > '''SIP Settings''' to access the page for configuring Call Settings.
    10 KB (1,534 words) - 10:43, 9 February 2023
  • Direct Access Key & Ringlist Settings (SIP)
    ...y, also known as speeddial button). The DAK keys can be used to call other intercom numbers or to trigger a dedicated feature by a single button press. To configure DAK keys, Inputs and Ring List functions, select '''SIP Configuration''' > '''Direct Access Key Settings'''.
    13 KB (2,160 words) - 17:54, 23 March 2021
  • Audio Messaging (Edge)
    * Audio Messaging services are supported when the station operates in SIP, Pulse or Edge mode. * Select '''Edge Configuration''' > '''Audio Messages'''.
    14 KB (2,234 words) - 12:21, 24 October 2023
  • VSF-Fortitude8 6.0 Release Notes
    '''Description:''' VSF-Fortitude8 is a firmware for Turbine Video Plus Intercom including the following devices: '''Compatibility: Turbine Video Plus intercom is compatible with Edge, SIP, ICX and AlphaCom systems.'''
    4 KB (660 words) - 05:04, 8 March 2022
  • DEVICE INFO
    1=AlphaCom (Intercom Exchange)<br> 5=SIP node<br>
    2 KB (248 words) - 15:52, 3 October 2019
  • Audio Settings (Devices)
    <td style='background-color:#efefef;'>The Audio Settings page - Advanced Configuration mode</td> *Edge mode: '''Edge Configuration''' > '''Audio Settings'''
    12 KB (1,733 words) - 18:14, 12 February 2024
  • Siemens Sivelliance - ICX-AlphaCom Integration
    ...tion or SoftClient to be associated with each Sivelliance Video Client, as SIP audio is routed through ICX-AlphaCom. *that ICX-AlphaCom is operational, with all the system connected intercom devices and SoftClients configured
    14 KB (2,080 words) - 13:42, 4 December 2023
  • ICX 1.0.3.X - Release Notes
    ===MTN-2616 Incoming SIP call will hang for 60 second if terminated before setup is completed=== ...VITE is followed by a SIP CANCEL during initiation of the call towards the InterCom server, the call will not be terminated correctly, fixed.
    7 KB (977 words) - 05:08, 8 March 2022
  • Mobotix Hub - ICX-AlphaCom Integration
    ...ation or SoftClient to be associated with each MOBOTIX HUB Desk Client, as SIP audio is routed through ICX-AlphaCom. *that ICX-AlphaCom is operational, with all the system connected intercom devices and SoftClients configured
    14 KB (2,096 words) - 13:47, 15 January 2024
  • Elevator alarm to external phone with voice identifcation
    ...ls) can be routed to an external telephone, either directly or first to an intercom station which can forward the call the external phone. When the telephone o In the following configuration examples there is a possibility of defining up to 6 different telephone num
    15 KB (2,374 words) - 12:09, 24 February 2023
  • Licenses for ICX-500 and ICX-AlphaCom Core
    ...installed. This is done from the web interface: [[ICX_Web#Licensing|System Configuration > Licensing]]. # In the Web interface of the ICX-500 or ICX-AlphaCom Core, go to System Configuration > Licensing, and '''Upload''' the license file, or alternatively paste the
    11 KB (1,604 words) - 12:28, 16 February 2024
  • LenelS2 OnGuard - ICX-AlphaCom Integration
    This article includes descriptions of setup and configuration, operation, and any limitations and/or notes surrounding the solution. *Zenitel intercom stations have been configured and point to the ICX
    15 KB (2,238 words) - 10:20, 24 October 2023
  • Turbine 5.0 - Release notes
    ...mware archive for all [[:Category:Stations#Turbine_stations|Turbine Family Intercom stations]] including devices: '''AlphaCom and SIP Systems'''<br>
    12 KB (1,827 words) - 10:18, 23 June 2022
  • Silent Alarm
    Each office is equipped with an intercom station, plus an alarm button. When the alarm button is pressed, a special ...arm is triggered by pressing an alarm button associated to an Alarm Sender intercom.
    12 KB (1,938 words) - 17:11, 4 January 2023
  • VSF-Fortitude8 6.4 Release Notes
    '''Description:''' VSF-Fortitude8 is a firmware for Turbine Video Plus Intercom including the following devices: ===MTN-3598 Entering the Group Calls menu in Edge Configuration does no longer crash the device web===
    5 KB (694 words) - 12:00, 7 December 2022
  • Turbine 7.2 - Release notes
    ...mware archive for all [[:Category:Stations#Turbine_stations|Turbine Family Intercom stations]] including devices: ...0-AC''' (only SIP mode and ICX- AlphaCom mode), '''ENA2060-DC1''' (only in SIP mode) and '''ENA2200-AC2''' & '''ENA2400-AC2''' (ICX-AlphaCom mode only).
    6 KB (858 words) - 13:40, 21 November 2022
  • Group Call (Edge)
    ...e sent from most modern SIP IP phones. Group call audio can be received by SIP IP phones that have a support for IP Multicast paging. ...s that ding/dong and other tones are not heard in ITSV, SDS-1 or 3rd party SIP phones.
    11 KB (1,796 words) - 11:27, 24 October 2023
  • AMAG Symmetry - IC-EDGE Integration
    Only points which are specific to this integration and to its connected intercom stations are described. Installation of the IC-Ecge System is described in * INTERCOM-KIT-V9 – Intercom license for Symmetry SMS v9. Only one per Symmetry SMS System required.
    19 KB (2,901 words) - 14:07, 15 February 2022
  • Turbine 6.4 - Release notes
    ...mware archive for all [[:Category:Stations#Turbine_stations|Turbine Family Intercom stations]] including devices: ...''' (only SIP mode and ICX- AlphaCom mode), and '''ENA2060-DC1''' (only in SIP mode)
    12 KB (1,908 words) - 12:53, 17 August 2022
  • Direct Access Key & Ringlist Settings (Pulse)
    ...y, also known as speeddial button). The DAK keys can be used to call other intercom numbers or to trigger a dedicated feature by a single button press. To configure DAK keys, Inputs and Ring List functions, select '''SIP Configuration''' > '''Direct Access Key Settings'''.
    13 KB (2,085 words) - 15:23, 12 September 2019
  • Milestone XProtect - IC-EDGE plug-in
    Only points which are specific to this integration and to it connected intercom stations are described. ==IC-EDGE - Configuration==
    12 KB (1,868 words) - 08:48, 16 August 2022
  • Milestone Xprotect - IC-Edge Integration (VS-Milestone Plugin)
    {{E}}{{note|This version of the integration is discontinued. For configuration of the latest plugin for integration with Milestone Xprotect go to [[Milest Only points which are specific to this integration and to it connected intercom stations are described.
    12 KB (1,892 words) - 04:49, 23 January 2024
  • Milestone XProtect - ICX-AlphaCom Integration
    *that ICX-AlphaCom is operational, with all the system connected intercom devices and SoftClients configured Only points which are specific to this integration and to connected intercom stations/SoftClients and IP speakers are described.
    15 KB (2,257 words) - 13:06, 29 April 2024
  • ENA Configuration - SIP mode
    {{S}} [[File:ENA SIP drawing.png|thumb|800px|ENA Amplifiers in SIP mode]] ...he configuration settings available for a Exigo Network Amplifier (ENA) in SIP mode. The ENA Amplifiers are configured through their web interface.
    16 KB (2,435 words) - 10:06, 11 April 2024
  • Group Call (Pulse)
    ...e sent from most modern SIP IP phones. Group call audio can be received by SIP IP phones that have a support for IP Multicast paging. == Configuration of group calls ==
    13 KB (2,064 words) - 15:57, 12 September 2019
  • Redundant Servers (AlphaCom XE)
    The concept is 1:1 redundancy of servers. The pair of servers has the same configuration, and only one of them is active at any time. ...rvers, where one is operational, and the other is in standby with the same configuration.
    16 KB (2,500 words) - 17:08, 28 June 2022
  • FAQ (IC-Edge)
    ...dge Controller]]". The Edge Controller is acting as a server for the other intercom stations in the system. Most Zenitel IP devices can act as an Edge Controll *[[:category:Stations|Intercom devices]] (Stations, VoIP kits etc) - the first 32 devices do not require a
    13 KB (2,186 words) - 15:15, 29 August 2023
  • Page/Party Conference 1 Line
    From each Intercom, one can: The stations must be '''Zenitel IP Devices'''. SIP devices are not supported in this application.
    4 KB (635 words) - 01:59, 2 March 2023
  • SIP trunk node - configuration
    ...ses the SIP protocol for easy interoperability with telephone systems. Via SIP Trunking the ICX-AlphaCom can be interfaced to: *SIP iPABX
    34 KB (5,437 words) - 16:32, 25 October 2023

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://wiki.zenitel.com/wiki/Special:Search"