Actions

Special

Search results

Page title matches

  • ...[[:category:ICX-AlphaCom Platform|ICX-AlphaCom system]] or the AlphaCom XE system. The integration is using the [[EDO - External Data Output|EDO port]]. From the [[Event Handler]] of the ICX-AlphaCom one can generate ASCII strings to be sent out on the EDO port, whi
    926 bytes (134 words) - 15:42, 15 August 2022

Page text matches

  • ...[[:category:ICX-AlphaCom Platform|ICX-AlphaCom system]] or the AlphaCom XE system. The integration is using the [[EDO - External Data Output|EDO port]]. From the [[Event Handler]] of the ICX-AlphaCom one can generate ASCII strings to be sent out on the EDO port, whi
    926 bytes (134 words) - 15:42, 15 August 2022
  • Depending on server type (AlphaCom XE or ICX-AlphaCom) and the AlphaPro version, AlphaPro is using different TCP ports w == ICX-AlphaCom server ==
    1 KB (210 words) - 10:38, 9 November 2023
  • '''Problem''': In an ICX-500 or ICX-Core system, when using the '''Reset''' button or the '''Set Node''' button from AlphaP ...ge & System''' > '''System''', make sure that the "Node Type" is set to '''ICX''', and not to "AlphaCom" or "AlphaCom XE".
    1 KB (153 words) - 10:59, 24 October 2023
  • DNA Fusion can be integrated with the ICX system or the AlphaCom system. ===ICX===
    1 KB (173 words) - 10:02, 12 May 2023
  • This article shows possible solutions for redundancy with the ICX-AlphaCom server. ==ICX-AlphaCom redundancy==
    2 KB (333 words) - 15:22, 28 June 2022
  • ...tween the ICX system or AlphaCom system and the Bosch Building Integration System (BIS) is via OPC. ===ICX===
    2 KB (309 words) - 10:13, 15 August 2022
  • ...management system which also provides an interface to the ICX or AlphaCom system. The interface is based on the ACDP Simple Link Layer Protocol. ...ons, RCI's and RCO's is shown. It is also possible to send commands to the ICX/AlphaCom making it possible to set up calls, operate the M-button, for inst
    2 KB (240 words) - 15:41, 15 August 2022
  • ...ision Control Center can be integrated with the ICX system or the AlphaCom system. The integration is done via OPC. ===ICX===
    2 KB (259 words) - 16:03, 15 August 2022
  • ...ngs Integrator (EBI) can be integrated with the ICX system or the AlphaCom system. The integration is via [[OPC Server|OPC]]. ===ICX===
    2 KB (246 words) - 15:59, 15 August 2022
  • {{AI}}Each of the two ethernet ports in the [[ICX-500 Gateway|ICX-500]] or in the [[:Category:AlphaCom Servers|AlphaCom Servers]] has an uniq ...ormation|System Monitoring > Node information]] and in [[ICX_Web#Licensing|System Configuration > Licensing]].
    990 bytes (153 words) - 09:59, 11 May 2022
  • {{I}}This article describes how to install the ICX-AlphaCom Core software package. ...tware is also available for installation on industry standard PC hardware. ICX-AlphaCom Core can be installed either on a physical machine or virtual mach
    4 KB (596 words) - 10:20, 6 March 2024
  • ...t the functions of Vipedia. One of those functions is the scheduler of the ICX-AlphaCom. ...he TKIE-2 kit]] article we can play scheduled messages to the Vipedia PAVA system.
    1 KB (187 words) - 12:11, 17 November 2023
  • Pressing the call button during conversation is by default ignored by the system. Available in ICX-AlphaCom and in AlphaCom XE from firmware v. 13.
    641 bytes (89 words) - 10:29, 24 October 2023
  • ...iti from Inner Range can be integrated with the ICX system or the AlphaCom system. The interface is based on a special integration module which is available ===ICX===
    3 KB (388 words) - 16:04, 15 August 2022
  • The ST2000 Security Management System from Habtech integrates with ICX-AlphaCom. This integration uses the VS-SDK for AlphaCom connecting with the ...acing a call, ending a call to be done from the ST2000 Security Management System.
    2 KB (328 words) - 14:18, 12 February 2024
  • This article describes how to install ICX-Core in a VirtualBox environment. * Operating System:
    5 KB (759 words) - 10:41, 24 October 2023
  • Previous Release - [[ICX 1.2.3.X - Release Notes]] ...s release notes describe new features, improvements and issues fixed after ICX 1.2.3.x.
    3 KB (480 words) - 13:56, 21 February 2024
  • ...y and Information Management (CSIM) software the ICX-AlphaCom and AlphaCom system. ...nd operation of the Vidsys CSIM product. Only points which are specific to ICX-AlphaCom and AlphaCom and to its connected intercom stations are described.
    2 KB (223 words) - 09:27, 8 September 2020
  • ==ICX-AlphaCom platform== ...X-AlphaCom Platform: [https://alpha.zenitel.com/downloads/ICX-AlphaCom.mp4 ICX-AlphaCom.mp4]
    1 KB (189 words) - 14:21, 26 February 2020
  • !style="background:#ffdead;" |ICX-AlphaCom 1.2.3.6 |colspan="5"|Simulates Small Reset sent from ICX-AlphaCom web interface.
    642 bytes (80 words) - 13:31, 30 June 2022
  • ...that actually becomes available depends on what [[Licenses for ICX-500 and ICX-AlphaCom Core|Audio Messaging license]] is installed. * In the web interface of the ICX-AlphaCom go to '''System Configuration''' > '''Messaging'''
    2 KB (228 words) - 15:12, 3 June 2022
  • ...e following paragraphs give a general description of the capability of the system, for more details please contact ela-soft directly. ==ICX/AlphaCom Setup==
    2 KB (351 words) - 15:39, 15 August 2022
  • ...s Latitude Network Video Management System (NVMS) is interfaced to the ICX system or AlphaCom based on the STENTOFON .NET SDK. ===ICX===
    4 KB (542 words) - 15:43, 15 August 2022
  • The Facility value is a way of determining which process of the ICX-AlphaCom created the message. Since the Syslog protocol was originally writ * Local1: [[AlphaCom system log|System log]]
    2 KB (295 words) - 16:40, 28 June 2022
  • ...he VS-SDK, where all event data is sent through to CathexisVision VMS from ICX-AlpaCom. * On initialization the ICX-AlphaCom events received by CathexisVision include site hardware informatio
    2 KB (290 words) - 08:17, 29 September 2022
  • ...om require Ubuntu 22.04 LTS<br>Upgrading Ubuntu will require upgrading the ICX-AlphaCom Core installation. ==ICX-AlphaCom Core 1.2.3.8 and below==
    5 KB (821 words) - 01:36, 22 February 2024
  • By default station errors are reported more or less instantly when the ICX-AlphaCom server looses communication with an IP Station, or if there is an Go to the [[Exchange_%26_System_(AlphaPro)#Faults|Exchange & System > RCI > Faults window]], select '''Fault Line''' > Change, and delete the [
    3 KB (412 words) - 14:02, 31 May 2022
  • This is done using the [[Event Handler]]. Go to Exchange & System from the top menu in [[AlphaPro]]: [[File:AlphaPro Exchange and System icon.png|thumb|left|500px]]
    982 bytes (148 words) - 13:48, 31 May 2022
  • ICX-AlphaCom (and AlphaCom XE) can be interfaced to a Tetra radio system in two ways: ...tercoms stations to listen to (and talk back to) a talk group in the Tetra system.
    2 KB (307 words) - 09:51, 13 February 2024
  • ...in to the [[Edge Controller]], and navigate to '''Edge Controller''' > '''System Configuration''' > '''Call and Audio'''. The ANC feature can be disabled (o ...eCancellingEdge.png|thumb|left|700px|ANC enabling/disabling in the IC-Edge system (screenshot from firmware 7 or later)]]
    3 KB (380 words) - 15:31, 25 October 2023
  • ...[[Exchange_%26_System_%28AlphaPro%29#Calls_and_Options|Exchange & System > System > Calls and Options]]: 'Urgent Feature Reminder'. [[File:CRM 20.PNG|thumb|left|500px|Exchange & System &rarr; System &rarr; Calls and Options]]
    943 bytes (132 words) - 14:12, 3 June 2022
  • ...e "PTT-mode" when the IP Speaker is used in an ICX-AlphaCom or AlphaCom XE system. We assume that the IP Speaker is already configured and registered to the ICX-AlphaCom server.
    990 bytes (151 words) - 16:02, 2 June 2022
  • ...d Sipelia which provides an interface from its Security Center Software to ICX-AlphaCom or AlphaCom XE and intercom stations in SIP-mode. ==ICX System ==
    2 KB (302 words) - 15:07, 26 June 2023
  • === ICX/AlphaCom system === === Edge system ===
    3 KB (438 words) - 09:15, 5 July 2022
  • ...using the [[ESPA 4.4.4|ESPA 4.4.4 protocol]], and activate features in the ICX/AlphaCom. The following types of systems have been tested: * When used with the ICX System, the following license is required in the ICX in order to enable the ESPA444 protocol: 1002602400 - ILI-IF Interface enab
    3 KB (456 words) - 11:10, 19 November 2019
  • ...ctuations in the frequency oscillating the quartz crystal on the AMC-IP or ICX-500 board. The realtime clock can be synchronized in several ways. The ICX-AlphaCom can synchronize its real time clock with Network Time Protocol (NT
    4 KB (726 words) - 14:07, 3 June 2022
  • This is done using the [[Event Handler]]. Select '''Exchange & System''' from the top menu in [[AlphaPro]]: [[File:AlphaPro Exchange and System icon.png|thumb|left|500px]]
    1 KB (166 words) - 11:12, 8 July 2022
  • ...r security operators and administrators to set up access control and alarm system monitoring and control at a site. This comprises * Alarm System Monitoring
    7 KB (1,035 words) - 15:42, 1 December 2022
  • A wav file with the wanted ringing tone must be uploaded to the ICX-AlphaCom or AlphaCom XE via the web interface. ===ICX-AlphaCom===
    3 KB (415 words) - 10:38, 7 November 2022
  • ...Prysm. The AppVision can be integrated with the ICX system or the AlphaCom system. The integration is via OPC. ===ICX===
    3 KB (467 words) - 08:59, 16 August 2022
  • | Display station and system information ...ion''': || Service code: Dial 789 on a display station to view station and system information. Press M-key to step to new information:
    1 KB (175 words) - 09:29, 11 May 2022
  • IPSecurityCenter™ aggregates intelligence from the ICX system or the AlphaCom audio server, allowing organizations to have a complete vie *Allows operators to make calls from within IPSecurityCenter using ICX or AlphaCom
    4 KB (615 words) - 10:19, 15 August 2022
  • |keywords=Zenitel,Vingtor-Stentofon,AlphaWikiZenitelWiki, ICX, Alphacom, IC-Edge, Pulse and SIP ...el AlphaWiki contains up to date technical information about the platforms ICX, AlphaCom, IC-Edge, Pulse and SIP Intercom.
    7 KB (815 words) - 11:50, 29 February 2024
  • When devices are used in an ICX-AlphaCom System, there are additional audio settings available when entering the '''Advance
    440 bytes (60 words) - 10:54, 16 December 2022
  • ...hnson Controls P2000 can be integrated with the ICX system or the AlphaCom system. The integration is using the MPC Data Protocol. ...ory messages and alarms. The P2000 system interfaces with the ICX/AlphaCom system to establish audio communication links between any two or more defined inte
    5 KB (714 words) - 16:05, 15 August 2022
  • ...l Sentry can be integrated with the ICX-AlphaCom system or the AlphaCom XE system. The integration is using the EDO port. Digital Sentry has an ASCII string based alarm input option. ICX or AlphaCom can send matching strings out from one its EDO-ports on events
    4 KB (613 words) - 08:55, 16 August 2022
  • ...stem. The integration is based on EDO and event handler programming in the ICX/AlphaCom. When used with the ICX System, the following license is required in the ICX in order to enable the EDO port: 1002602400 - ILI-IF Interface enabling
    4 KB (552 words) - 13:59, 19 November 2019
  • {{I}}This article describes how to install ICX-AlphaCom Core in a Hyper-V environment. * Operating System:
    7 KB (1,099 words) - 10:22, 17 May 2023
  • A '''SuperUser''' is a user with access to all features in the system. A SuperUser is assigned to [[Class of service]] 16. By default there is on ...sages from the AlphaCom. The following error messages are generated by the system:
    1 KB (147 words) - 14:06, 3 June 2022
  • The interface between the ICX system or the AlphaCom system and AC2000 from CEM Systems (Tyco) is based on a special integration module ...vides seamless bi-directional communication between CEM Systems AC2000 and ICX/AlphaCom intercom servers and workstations, as well as their respective int
    6 KB (902 words) - 10:15, 15 August 2022
  • [[File:edge-icon.jpg|70px|link=Category:IC-EDGE System]] [[File:icx_icon.png|70px|link=Category:ICX-AlphaCom Platform]]
    496 bytes (79 words) - 15:29, 26 October 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (203 words) - 14:32, 12 February 2024
  • ===ICX=== ...Product Key which covers all stations connected to all ICX's in a network. ICX licenses can be stacked, i.e. 1x 1002602306 + 2x 1002602309 gives 1088 API
    2 KB (310 words) - 09:01, 16 August 2022
  • ...to the ICX license process as well as the product lifecycle management of ICX systems. ==IC Asset Management System==
    8 KB (1,359 words) - 10:03, 25 May 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (207 words) - 13:37, 29 January 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    1 KB (170 words) - 15:15, 23 June 2023
  • ...in to the [[Edge Controller]], and navigate to '''Edge Controller''' > '''System Configuration''' > '''Call and Audio''', and enable/disable "'''AGC'''" per [[File:AGC Edge.png|thumb|left|700px|Enabling AGC in an IC-Edge system]]
    3 KB (439 words) - 15:57, 25 October 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (209 words) - 13:37, 29 January 2024
  • ...describes how to upgrade the software of the [[ICX-500 Gateway|ICX-500 and ICX-510 Gateways]]. {{Note|ICX-500 with hardware revision .0102 requires minimum FW 1.2.3.3}}
    6 KB (1,041 words) - 11:57, 21 February 2024
  • The built-in [[Scheduler (Event Type)|Scheduler]] function in ICX-AlphaCom can be used activate [[Transfer_Features#Call_Forwarding|Call Forw As the internal clock of the ICX-AlphaCom server might drift over time, it is recommended that the server is
    4 KB (571 words) - 14:59, 11 August 2022
  • Go to Exhcange&System from the top menu in [[AlphaPro]]: [[File:AlphaPro Exchange and System icon.png|thumb|left|500px]]
    1 KB (242 words) - 14:03, 31 May 2022
  • [[Image:ICX Tel Service2.png|right|900px]] This article describes how the ICX-AlphaCom can access the public telephony network by connecting to a SIP Ser
    7 KB (1,036 words) - 10:22, 14 March 2023
  • ICX-AlphaCom and AlphaCom interfaces to the Total Recall range of voice recorde The recorder will now accept all SIP recordings from the ICX-AlphaCom or AlphaCom server. There is no further configuration required.<b
    1 KB (176 words) - 03:50, 4 May 2023
  • ===ICX=== ICX requires the presence of the appropriate API/OPC license.
    5 KB (844 words) - 01:18, 11 October 2022
  • ...ler (Event Type)|Scheduler]] function in [[:category:ICX-AlphaCom Platform|ICX-AlphaCom]] can be used to dispatch prerecorded messages or time signals at As the internal clock of the ICX-AlphaCom server might drift over time, it is recommended that the server is
    5 KB (712 words) - 20:36, 22 July 2022
  • ...ro, [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Exchange & System > System > Call Forwarding Ring Count]].<br> [[Category: ICX-AlphaCom features]]
    1 KB (146 words) - 15:30, 20 May 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (233 words) - 15:09, 30 April 2024
  • # Planning your system ...installation by collecting configuration data you would need to setup your system.
    15 KB (2,159 words) - 15:57, 16 August 2022
  • === ICX/AlphaCom system === === IC-Edge System ===
    3 KB (544 words) - 14:15, 26 May 2023
  • ...system can be configured to operate as a Page/Party line Conference 1 line system. <br> ...an be included in AlphaCom XE and up to 32 participants can be included in ICX-500.
    4 KB (635 words) - 01:59, 2 March 2023
  • * [[Configuration guide for STENTOFON IP-DECT|IP Dect System 6000]] * [[Configuration guide for Ascom IP-DECT|Ascom IP Dect System]]
    2 KB (278 words) - 12:21, 24 February 2023
  • ...onfiguration required to connect Vipedia PAVA system with the ICX-AlphaCom system using a [[TKIE-2]] kit. ...launched within the ICX-AlphaCom can include zones(s) in the Vipedia PAVA system
    7 KB (1,287 words) - 12:18, 17 November 2023
  • * Select '''Advanced ICX-AlphaCom''' -> '''Keyboard Settings''' (ICX-AlphaCom mode) * In '''System Main''' > '''Main Settings''', set '''Station Mode''' = '''Use SIP''', then
    2 KB (267 words) - 13:34, 23 November 2020
  • ...escribes how you can override the voice-operated duplex (VOX), and set the system in Simplex (Press To Talk) mode. ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event:
    1 KB (175 words) - 11:37, 8 July 2022
  • * ICX-AlphaCom: Any ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events:
    1 KB (189 words) - 11:32, 8 July 2022
  • This can be changed in AlphaPro, Exchange & System, System, RCI and Faults tab. This is done in AlphaPro, Exchange & System, System, Calls and Options.
    1 KB (248 words) - 10:22, 25 May 2022
  • ...on into Security Expert’s integrated access control and intruder detection system. ...rmation presented in this article describes how to prepare an ICX-AlphaCom system to communicate with Security Expert and how to program Security Expert to i
    7 KB (1,008 words) - 15:14, 16 March 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (222 words) - 13:49, 29 January 2024
  • The ICX-AlphaCom or Pulse directory reports can be saved as either text or csv file Next step: [[IMT - Additional intercom system configuration]]
    668 bytes (98 words) - 15:03, 16 August 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (291 words) - 15:00, 5 February 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (291 words) - 15:01, 5 February 2024
  • The integration between ICX or AlphaCom and the Pro-Watch from Honeywell is via the MPC protocol. ...rial and IP data connections. AlphaCom also support both methods, while in ICX one must use an Ethernet to Serial Converter if serial data is needed.
    8 KB (1,324 words) - 16:01, 15 August 2022
  • |'''Event type''': || 27 - System Status [[Redundant Servers - ICX-AlphaCom|Redundant Servers (IP-HA)]]:
    2 KB (263 words) - 17:28, 1 March 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (229 words) - 13:47, 29 January 2024
  • ...device (subevent) 65 can be used to write the wanted value to the nvram at system startup: [[Category: ICX-AlphaCom features]]
    2 KB (279 words) - 12:16, 23 February 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (301 words) - 14:25, 7 February 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (302 words) - 15:01, 5 February 2024
  • ...to [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Exchange & System -> System -> Calls and Options]] and set Call Forwarding – Ringing Count to 0. ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events:
    2 KB (225 words) - 11:36, 8 July 2022
  • This article describes how to configure the ICX-AlphaCom in such a way that a call button from a substation must be pressed ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events:
    1 KB (218 words) - 11:21, 8 July 2022
  • ...text strings via a TCP/IP connection to the Milestone XProtect Management System.<br> *ICX-AlphaCom Setup
    6 KB (885 words) - 08:44, 16 August 2022
  • ...m > Net Routing''' use the ''Insert'' button to create a route between the ICX-AlphaCom and the first Gateway. Add the other gateway as the Alternative Ro ...fining the maximum number of VoIP channels available for the SIP Trunk the ICX will automatically use the Alternative Route if all VoIP channels are in us
    2 KB (381 words) - 12:05, 24 February 2023
  • [[File:ICX SIP Devices.PNG|thumb|right|600px|ICX-AlphaCom as SIP Server]] ...IP server. This article describes how to '''create a SIP account''' in the ICX-AlphaCom to which SIP devices can register.
    8 KB (1,130 words) - 23:35, 16 March 2023
  • The [[Redundant Servers - ICX-AlphaCom|IP-HA system]] reports changes of the server state to the [[Event Handler]]. ...nfigure the Event Handler in order to report current server state to the [[System log]].
    3 KB (384 words) - 16:44, 28 June 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (260 words) - 17:20, 24 November 2023
  • [[File:NPort ICX Block.PNG|600px|right|thumb|Serial communication using Moxa NPort converter In case there is a need for serial communication between the ICX-500 and a remote application, an external Ethernet to Serial Converter is r
    4 KB (615 words) - 16:47, 11 October 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (312 words) - 14:00, 29 January 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (219 words) - 12:36, 28 November 2023
  • Next Release - [[ICX 1.1.3.X - Release Notes]] ...software 1.0.3.x with incremental bug fix releases. The release notes for ICX 1.0 describe new features, improvements and issues fixed after the initial
    7 KB (977 words) - 05:08, 8 March 2022
  • This article describes step by step how to get started with an ICX-AlphaCom system. ...sualized in the image to the right, the article will show how to set up an ICX-500 server, a Desktop station and a Help Point/Door intercom.
    9 KB (1,490 words) - 12:56, 26 February 2024
  • *[[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] *[[Adding station to existing system (Edge)|Edge mode]]
    2 KB (229 words) - 17:21, 22 January 2024
  • ...in to the [[Edge Controller]], and navigate to '''Edge Controller''' > '''System Configuration''' > '''Call and Audio''', and enable "'''AVC'''": [[File:AVC Enable Edge.png|thumb|left|700px|Enabling AVC in an IC-Edge system]]
    4 KB (605 words) - 13:58, 16 November 2023
  • ...is distributed by using the [[Audio Program|Audio Program feature]] of the ICX-AlphaCom. By default this feature is using the HD Voice codec G.722. ...an even better audio quality for background music distribution over the PA system is required, it is possible to use the HD Audio codec PCM L16/48kHz.
    7 KB (1,160 words) - 15:10, 27 October 2023
  • ...talls a configurable interface between Milestone XProtect Smart Client and ICX-AlphaCom or IC-EDGE. ...lemented. The call logging is done using the Milestone XProtect Management system logging facility.
    2 KB (325 words) - 10:19, 30 June 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (269 words) - 14:37, 29 January 2024
  • *[[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] *[[Adding station to existing system (Edge)|Edge mode]]
    2 KB (274 words) - 09:35, 7 March 2024
  • {{AI}} [[File:ENA Amp block.png|thumb|800px|ICX-AlphaCom with ENA Amplifiers]] ...c configuration on how to get started with the ENA Amplifier used with the ICX-AlphaCom server. For a more detailed description of various settings and op
    4 KB (552 words) - 11:56, 9 February 2022
  • ...s feature '''should not exceed approx. 50 stations'''. (Not applicable for ICX-AlphaCom) ...haPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|'''Exchange and System''' -> '''Events''']], press '''Insert''' and create the following event:
    2 KB (315 words) - 15:22, 11 August 2022
  • [[Door opening]] is a standard feature in the ICX-AlphaCom and AlphaCom XE. When an operator is in a conversation with a door ...is done from AlphaPro, [[Exchange_%26_System_%28AlphaPro%29#RCO|Exchange & System > RCO]]. Here the logical RCO is assigned to a physical address. The physi
    7 KB (1,107 words) - 11:16, 24 October 2023
  • This article describes how to program the AlphaCom XE and ICX-AlphaCom Recording Interface when used with 3rd party recorders. ==ICX-AlphaCom Licenses==
    10 KB (1,491 words) - 16:02, 9 October 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (204 words) - 09:52, 16 August 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (204 words) - 12:51, 23 June 2023
  • ...nd_ICX-AlphaCom_Core#Available_licenses|IP Station License is required for ICX-AlphaCom]]. * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
    3 KB (405 words) - 14:47, 22 April 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (206 words) - 12:51, 23 June 2023
  • ...8 (i.e. license for 16 audio or video devices). In AlphaNet each connected ICX/AlphaCom requires its own license. ...0120, but excluding the stream licenses. 1190110120 must be present in the system before this license can be purchased.
    5 KB (549 words) - 14:01, 15 February 2024
  • ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: [[Category: ICX-AlphaCom Applications]]
    775 bytes (106 words) - 11:34, 8 July 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (336 words) - 14:44, 29 January 2024
  • ==ICX-AlphaCom Mode== ...is by default set as input. The input is programmed in Edge Controller -> System Configuration -> Direct Access Key (DAK) and Buttons and Inputs.
    3 KB (528 words) - 16:01, 10 May 2023
  • ...[Exchange_%26_System_%28AlphaPro%29#Calls_and_Options|Exchange & System -> System -> Calls and Options]]), the Group Hunt can be programmed either to: [[Category: ICX-AlphaCom features]]
    2 KB (253 words) - 09:22, 30 June 2022
  • ==ICX-AlphaCom Mode== ...is by default set as input. The input is programmed in Edge Controller -> System Configuration -> Direct Access Key (DAK) and Buttons and Inputs.
    3 KB (522 words) - 14:46, 10 February 2022
  • ==Alphacom - ICX Mode== ...is by default set as input. The input is programmed in Edge Controller -> System Configuration -> Direct Access Key (DAK) and Buttons and Inputs.
    3 KB (548 words) - 12:51, 5 October 2023
  • ...iated to VS-Operator receives a Call Request, an event is triggered in the ICX-AlphaCom. This event can send a data command to the VS-Operator, which can * In VS-Operator, System Configuration, select '''Filter sets''' > '''Add''' > '''Station''', and en
    8 KB (1,132 words) - 10:55, 29 June 2023
  • * Make screenshots of AlphaWeb System Configuration pages: * Upgrade the ICX to the latest version
    856 bytes (121 words) - 10:19, 25 September 2020
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (216 words) - 12:52, 28 November 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (216 words) - 12:52, 28 November 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
    2 KB (258 words) - 14:18, 12 February 2024
  • *People on the move wanting access to the ICX-AlphaCom services via their laptop * [[Licenses_for_ICX-500_and_ICX-AlphaCom_Core|SoftClient License (ICX-AlphaCom): 1002600300 - ILS-SC]]
    3 KB (378 words) - 08:19, 5 April 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (230 words) - 15:47, 8 September 2023
  • {{I}} This article lists licenses available for ICX-500 and ICX-AlphaCom Core. All licenses can be stacked. # When Zenitel receives an order for ICX licenses, a '''Product Key''' will be sent by e-mail in return
    11 KB (1,604 words) - 12:28, 16 February 2024
  • The ICX and AlphaCom systems can be interfaced to American Dynamics victor. ...Dynamics (Tyco), is based on EDI/EDO and event handler programming in the ICX/AlphaCom. On the victor side the integration is through the General Purpose
    9 KB (1,497 words) - 09:04, 16 August 2022
  • ...otline Station - 1008070010|Turbine based]] IP Hotline station, used in '''ICX-AlphaCom''' mode. ...Board. An event must be created that reports correct handset status to the ICX-AlphaCom.
    4 KB (621 words) - 14:17, 12 February 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (268 words) - 13:30, 26 June 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (239 words) - 09:54, 16 August 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (230 words) - 12:52, 28 November 2023
  • {{note|Note: This article relates to the integration between OnGuard and ICX-AlphaCom, or AlphaCom with software version 13.1.3.3 or newer. For older Al ...figure ICX and AlphaCom XE as a communication platform from within OnGuard System Administration.
    15 KB (2,238 words) - 10:20, 24 October 2023
  • ...e which connects Feenics with a locally deployed Zenitel system. Multiple ICX-AlphaCom exchanges can be combined and incorporated into Feenics, providing ...alarm and alert notifications which are generated from within the Feenics system, allowing for immediate notification if a station becomes disconnected or t
    14 KB (2,263 words) - 10:03, 12 May 2023
  • ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: [[Category: ICX-AlphaCom Applications]]
    873 bytes (122 words) - 11:35, 8 July 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (223 words) - 12:50, 28 November 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (223 words) - 12:50, 28 November 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (217 words) - 12:46, 28 November 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (217 words) - 12:38, 28 November 2023
  • ...s the minimum configuration required for IP Stations to operate with an '''ICX-AlphaCom''' or '''AlphaCom XE''' server. The IP Stations are configured thr * [[Getting Started (ICX-AlphaCom)|Getting Started with ICX-AlphaCom]]
    6 KB (951 words) - 11:32, 23 June 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (217 words) - 12:47, 28 November 2023
  • ...multiple zone selection and only audio line from ICX-system to the Vipedia system an IP-LCM is used. This article will describe three use cases with their ne When you call a group call number in the ICX-AlphaCom a relay on the IP-LCM is activated. This in turn will set up a fix
    9 KB (1,523 words) - 13:15, 17 November 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (244 words) - 12:27, 29 January 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (224 words) - 12:50, 28 November 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (245 words) - 09:48, 16 August 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (245 words) - 09:48, 16 August 2022
  • When integrating Vipedia PAVA and an ICX-500 system it can be useful to have an indication of the status of the PAVA in the con The IP-LCM and CRM-V are registered to an ICX-500
    6 KB (928 words) - 12:23, 17 November 2023
  • ...ro: [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Exchange & System > System > Calls and Options]] [[Category: ICX-AlphaCom features]]
    2 KB (257 words) - 15:16, 3 June 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (245 words) - 09:47, 16 August 2022
  • '''VS-Operator''' is a PC-based system management package for the ICX-AlphaCom Audio Server. It shows the status of intercom devices using maps a *Get a quick overview of the system status – support for multiple monitors
    2 KB (294 words) - 10:36, 29 June 2023
  • Enter the IP Address of your ICX-AlphaCom or AlphaCom server. In the AlphaCom inbuilt webserver, AlphaWeb, navigate to '''System Configuration -> Logging'''. Click '''<u><span style="color: Blue">Edit</sp
    4 KB (591 words) - 10:00, 16 August 2022
  • ...Schneider Access Expert with a locally deployed Zenitel system. Multiple ICX-AlphaCom exchanges can be combined and incorporated into Schneider Access E ...notifications which are generated from within the Schneider Access Expert system, allowing for immediate notification if a station becomes disconnected or t
    15 KB (2,407 words) - 09:00, 16 August 2022
  • ...lect [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Exchange & System, System, Calls and Options. '''Hotline Call Delay''']]. [[Category: ICX-AlphaCom features]]
    2 KB (328 words) - 09:58, 24 May 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (225 words) - 12:38, 28 November 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (230 words) - 12:47, 28 November 2023
  • ...m AlphaPro software version 12.1.3.0, AlphaPro supports communication with ICX-AlphaCom via HTTPS. To enable this: *Go to '''Exchange & System'''
    3 KB (524 words) - 11:40, 25 March 2020
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (230 words) - 12:46, 28 November 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (230 words) - 12:46, 28 November 2023
  • ...available in the IP settings can be found here: [[Station Web Interface - ICX-AlphaCom mode]] *ICX-AlphaCom IP address
    6 KB (954 words) - 15:15, 28 January 2022
  • The link is actualized on the basis of local intercom server ICX-500/ICX-Core to AEOS, without the inclusion of AlphaNet. ...ersation (ICX-AlphaCom to AEOS) after providing the “open door” command in ICX-AlphaCom and playing a prerecorded audio message on the intercom when the d
    12 KB (1,764 words) - 13:04, 19 March 2024
  • {{I}}[[Image:ICX-510 gateway.PNG|thumb|500px|The ICX-510 Gateway]] *'''ICX-510-IA Gateway'''. Item no: 1002000110, available as from January 2024.
    9 KB (1,438 words) - 11:28, 25 January 2024
  • ...describes the network guidelines of the [[:Category:ICX-AlphaCom Platform|ICX-AlphaCom]] and [[:Category:AlphaCom XE|AlphaCom XE]] platforms. ==The ICX-AlphaCom and AlphaCom XE servers==
    6 KB (905 words) - 10:42, 24 January 2024
  • * Tamper Alarm (ICX-AlphaCom mode) How to configure the station, depends on the mode of operation (ICX-AlphaCom, IC-Edge or SIP mode).
    5 KB (848 words) - 16:01, 7 September 2023
  • *To configure the Input select '''Edge Controller''' > '''System Configuration''' > '''Direct Access Keys'''. <br> === Configuration in ICX-AlphaCom ===
    3 KB (371 words) - 10:21, 24 October 2023
  • In AlphaPro, select '''Exchange & System''' > '''Events''', and '''Insert''' an event with the following properties: [[Category: ICX-AlphaCom Applications]]
    1 KB (160 words) - 14:30, 31 May 2022
  • ...e:ITSV-1-AlphaCom.png|thumb|right|500px|ITSV-1 IP Phone in ICX or AlphaCom system]] ...set up the '''ITSV-1''' Video Intercom to operate in a '''ICX or AlphaCom system'''. The ITSV can be used for audio only, or it can also be used to show the
    13 KB (2,014 words) - 15:10, 16 March 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (322 words) - 09:48, 16 August 2022
  • This article describes how substations in the ICX-AlphaCom can be configured to call external telephone number(s). {{Note|The ICX-AlphaCom and SIP Gateway must be configured to use '''One Stage''' (Enbloc)
    9 KB (1,398 words) - 12:28, 24 February 2023
  • ...tel IP device, to which the door magnet (or an input in the access control system) is connected. [[Category: ICX-AlphaCom features]]
    1 KB (212 words) - 11:13, 24 October 2023
  • ...al settings under [[Exchange_%26_System_(AlphaPro)#Timers|Exchange&System->System->Timers]]. Default is 11 seconds: [[Category:ICX-AlphaCom Applications]]
    2 KB (352 words) - 13:56, 31 May 2022
  • = CCURE 9000 ICX-AlphaCom integration = This did not affect a stand-alone configurations (SAS only) system.
    1 KB (150 words) - 08:16, 4 August 2020
  • ...e screen: '''Operator station is not defined correctly, please contact the system administrator'''.
    1 KB (213 words) - 10:49, 24 October 2023
  • The user always dials a directory number when using the ICX-AlphaCom. The ICX-AlphaCom looks up the directory number in the directory number table, where The feature number tells the ICX-AlphaCom which major service the user wants. In addition, many features hav
    6 KB (1,019 words) - 15:43, 20 May 2022
  • ...ere are several Call Requests at the same time, they will be queued in the ICX-AlphaCom and handled one by one. The macro [[%tin|%tin (Trunk In Use)]] is * ICX-AlphaCom: any
    5 KB (892 words) - 12:23, 23 February 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (281 words) - 16:08, 23 June 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (280 words) - 16:09, 23 June 2023
  • [[File:ITSV-2 ICX.png|thumb|right|500px|ITSV-2 Phone in ICX or AlphaCom system]] ...set up the '''ITSV-2''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for audio only, or it can also be used to show the
    15 KB (2,319 words) - 13:00, 17 August 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (292 words) - 14:51, 29 January 2024
  • Previous Release - [[ICX 1.0.3.X - Release Notes]] Next Release - [[ICX 1.2.3.X - Release Notes]]
    10 KB (1,462 words) - 05:09, 8 March 2022
  • ...minutes of speech can be recorded from each individual station. The total system storage capacity for recall is approx. 40 minutes. ...simultaneous group calls can be disabled in AlphaPro, Exchange & System > System > Calls and Options: Simultanous Group Calls. If disabled only one group ca
    5 KB (811 words) - 20:09, 27 September 2023
  • ...SV-4 ICX.png|thumb|right|500px|ITSV-4 Phone in ICX-AlphaCom or AlphaCom XE system]] ...set up the '''ITSV-4''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for audio only, or it can also be used to show the
    15 KB (2,349 words) - 15:28, 6 November 2023
  • Compared to the Call Request feature the Ringing Group system has the following differences: One can upload wav files to the ICX-AlphaCom server, and use customized ringing tone for different ringing grou
    5 KB (796 words) - 09:22, 30 June 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (286 words) - 16:09, 23 June 2023
  • ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event:
    2 KB (320 words) - 11:22, 8 July 2022
  • ...SV-5 ICX.png|thumb|right|500px|ITSV-5 Phone in ICX-AlphaCom or AlphaCom XE system]] ...''ITSV-5''' Video Intercom to operate in an '''ICX-AlphaCom or AlphaCom XE system'''. The ITSV can be used for audio only, or it can also be used to show the
    15 KB (2,352 words) - 15:28, 6 November 2023
  • ...:Mobile Radio TKIE.png|thumb|700px|Interface to non-selective mobile radio system using TKIE kit]] The ICX-AlphaCom can be interfaced to non-selective mobile radio systems via a Turb
    6 KB (869 words) - 11:26, 24 May 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (294 words) - 16:09, 23 June 2023
  • ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events: [[Category: ICX-AlphaCom Applications]]
    1 KB (188 words) - 11:32, 8 July 2022
  • [[File:ITSV-3 ICX.png|thumb|right|500px|ITSV-3 Phone in ICX or AlphaCom system]] ...set up the '''ITSV-3''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for audio only, or it can also be used to show the
    16 KB (2,396 words) - 13:00, 17 August 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (305 words) - 15:22, 23 June 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (308 words) - 14:50, 29 January 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (312 words) - 12:22, 23 June 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    3 KB (313 words) - 14:26, 31 January 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    3 KB (315 words) - 14:21, 31 January 2024
  • [[File:ICX and stations.png|thumb|400px|ICX-AlphaCom Intercom System]] ...through the web interface of Zenitel IP Stations when operating with an '''ICX-AlphaCom''' or '''AlphaCom XE''' server.
    9 KB (1,413 words) - 13:26, 12 January 2024
  • ...w to set up the '''Akuvox R29S''' to operate in a '''ICX''' or '''AlphaCom system'''. The Akuvox R29S can be used for audio only, or it can also send the vid ...29S requires a [[Licenses#SIP_station_license|SIP Station license]] in the ICX-AlphaCom server.
    11 KB (1,727 words) - 12:05, 23 February 2023
  • In AlphaPro, go to Exchange & System, System, Events and insert an event with UDP 8 (any station) as owner, event type 1 [[Category: ICX-AlphaCom Applications]]
    2 KB (329 words) - 14:18, 31 May 2022
  • <td style='background-color:#efefef;'>Siemens Sivelliance - ICX-AlphaCom Integration</td> The interface between ICX-AlphaCom and Siemens Sivelliance VMS is through an [https://alpha.zenitel.c
    14 KB (2,080 words) - 13:42, 4 December 2023
  • #REDIRECT [[Milestone XProtect - ICX-AlphaCom Integration]] The interface between AlphaCom, ICX and Milestone XProtect VMS is through an integration module which is availa
    18 KB (2,900 words) - 08:51, 16 August 2022
  • ...r can be used together with a [[Redundant Servers - ICX-AlphaCom|redundant system]], communicating with the Operational IP address. It can provide graphical Here is a description on how to set up monitoring so the ICX-AlphaCom statuses can be viewed in VSOP.
    10 KB (1,610 words) - 15:55, 8 November 2023
  • ...lugin for integration with Milestone Xprotect go to [[Milestone XProtect - ICX-AlphaCom Integration]]}} The interface between AlphaCom, ICX and Milestone XProtect VMS is through an integration module which is availa
    18 KB (2,918 words) - 04:50, 23 January 2024
  • <td style='background-color:#efefef;'>MOBOTIX HUB - ICX-AlphaCom Integration</td> The interface between ICX-AlphaCom and MOBOTIX HUB VMS is through an [https://alpha.zenitel.com/downl
    14 KB (2,096 words) - 13:47, 15 January 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    2 KB (325 words) - 12:22, 23 June 2023
  • Alternative solution: [[IP Telephony Service (ICX-AlphaCom)]] ...tup of the GSM gateway MV-370 (Mobile VoIP) for communication with the ICX system or the AlphaCom.
    12 KB (1,892 words) - 15:14, 16 April 2024
  • This article describes how to configure redundant ICX-AlphaCom servers. For redundancy using AlphaCom XE servers, see [[Redundant <td style='background-color:#efefef;'>Redundant Servers - ICX-AlphaCom</td>
    19 KB (2,929 words) - 09:31, 1 August 2023
  • ...ks up sound according to the settings in VAD, it will trigger DAK5. In the ICX-AlphaCom [[Event Handler]] there is an [[Station Input or Station DAK key ( ...turn on when sound detection is enabled. Information will be sent to the [[System log]] whenever a staff station enable or disable the Sound Detection.
    5 KB (815 words) - 14:02, 16 November 2023
  • <td style="display: block; vertical-align: bottom;">[[Image:Milestone ICX-AlphaCom.png|400px]]</td> <td style='background-color:#efefef;'>Milestone XProtect - ICX-AlphaCom Integration</td>
    15 KB (2,257 words) - 13:06, 29 April 2024
  • # Set '''Station Mode''' = '''ICX-AlphaCom''' # Enter the '''ICX-AlphaCom IP-address'''
    4 KB (584 words) - 10:35, 22 April 2024
  • ...[[IP Heavy Duty Station V2|IP Heavy Duty Stations (Version 2)]] used in '''ICX-AlphaCom''' mode. ...immediately. To change the delay time, select '''Exchange & System''', '''System''', '''Calls and Options'''.
    5 KB (718 words) - 09:30, 20 September 2023
  • In AlphaPro select '''Exchange & System''' > '''Serial Ports''', and select the EDIO port to configure. ...password alphaadmin. Replace the "Host" field with the IP Address of your ICX-AlphaCom.
    4 KB (557 words) - 00:56, 26 March 2024
  • ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: [[Category:ICX-AlphaCom Applications]]
    1 KB (194 words) - 11:14, 8 July 2022
  • ...ber_Translation|ICX-Web]] or [[AlphaWeb#SIP_Settings|AlphaWeb]], in the '''System Configuration''' > '''SIP settings''' menu, one can upload a CSV file, whic [[Category: ICX-AlphaCom - SIP Integration]]
    3 KB (496 words) - 12:17, 24 February 2023
  • Up to 254 ICX-AlphaCom servers can be interconnected in AlphaNet. One server can have up *Click on [[Exchange_%26_System_(AlphaPro)#NetRouting|Exchange & System > Net Routing]] > Insert
    11 KB (1,662 words) - 07:55, 5 July 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    3 KB (344 words) - 12:22, 29 January 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    3 KB (345 words) - 12:21, 29 January 2024
  • '''Description:''' AlphaPro is the programming tool for the ICX and AlphaCom server <br> '''Description:''' AlphaPro is the programming tool for the ICX and AlphaCom server <br>
    6 KB (847 words) - 05:32, 8 March 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
    2 KB (201 words) - 09:20, 16 August 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    3 KB (344 words) - 12:17, 29 January 2024
  • The interface between AlphaCom, ICX and IC-EDGE and Genetec Security Center is through an integration module wh *that Security Center is operational, with all to the system connected cameras configured
    24 KB (3,826 words) - 15:45, 22 November 2023
  • ...viaMV370.PNG|thumb|500px|right|Application example: Sending line errors in ICX-AlphaCom as SMS message]] This article describes how information can be sent from the ICX-AlphaCom (or AlphaCom XE) to a mobile phone as a SMS message. This could fo
    13 KB (1,988 words) - 12:08, 23 February 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
    2 KB (214 words) - 09:21, 16 August 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
    2 KB (211 words) - 11:43, 21 November 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    3 KB (379 words) - 15:12, 29 January 2024
  • Use the event handler (Exhcange&System->Events) to create this event: [[Category: ICX-AlphaCom Applications]]
    1 KB (240 words) - 16:20, 31 May 2022
  • ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events: [[Category: ICX-AlphaCom Applications]]
    2 KB (250 words) - 13:48, 14 December 2023
  • [[Image:Audio Program ICX.PNG|thumb|700px|Audio Program distribution]] The ICX-AlphaCom system supports distribution of '''Audio Programs'''. There must be an external au
    13 KB (1,945 words) - 09:31, 30 June 2022
  • ICX-AlphaCom, or AlphaCom XE with AMC-IP board hardware version 5 or 6 ([[AMC-I Log on to AlphaWeb, '''System Configuration''' > '''Messaging''':
    3 KB (433 words) - 14:34, 23 January 2024
  • *Previous Release - [[ICX 1.1.3.X - Release Notes]] *Next Release - [[ICX 1.3.3.X - Release Notes]]
    9 KB (1,335 words) - 11:59, 21 February 2024
  • PACOM GMS (Graphical Management System) is a multi-site security management platform, providing integration betwee ...tories of the PACOM GMS system describing how to install and configure the system.
    10 KB (1,382 words) - 08:54, 16 August 2022
  • *that the Milestone XProtect VMS is operational, with all the system connected cameras configured Zenitel devices can be integrated into the Milestone XProtect system using their ONVIF capabilities and supplemented with the Zenitel Call Handl
    14 KB (2,203 words) - 15:14, 22 May 2023
  • ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: [[Category:ICX-AlphaCom Applications]]
    2 KB (290 words) - 10:54, 5 May 2023
  • ...lugin for integration with Milestone Xprotect go to [[Milestone XProtect - ICX-AlphaCom Integration]]}} *that the Milestone XProtect VMS is operational, with all the system connected cameras configured
    22 KB (3,426 words) - 15:09, 25 May 2023
  • ...ses#SIP_station_license|"SIP station" license]]. In [[AlphaWeb]], go to '''System Configuration''' -> '''Licensing''', and Insert the license key containing ...led for the ethernet port used by the SIP users. In [[AlphaWeb]], go to '''System Configuration''' -> '''Filters''', and enable the UDP ports for SIP (5060)
    10 KB (1,521 words) - 12:00, 27 February 2023
  • ...atest plugin for integration with Milestone Xprotect go to [[Mobotix Hub - ICX-AlphaCom Integration]]}} *that MOBOTIX HUB is operational, with all the system connected cameras configured
    21 KB (3,311 words) - 15:46, 25 May 2023
  • *that the Milestone XProtect VMS is operational, with all to the system connected cameras configured ...e used for changing system type in which case you press “Load” – makes the system change – and press “Apply”.
    12 KB (1,868 words) - 08:48, 16 August 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
    2 KB (243 words) - 09:24, 16 August 2022
  • ...(Zenitel) and Controlling Software (Building Management or Access Control System) The Manufacturer of the Field Equipment (Zenitel ICX-AlphaCom or AlphaCom XE) delivers an OPC Server Application. The communica
    9 KB (1,622 words) - 02:39, 9 December 2022
  • * [[Milestone XProtect - ICX-AlphaCom Integration]] ...art of Milestone XProtect VMS. This article describes how to integrate the ICX/AlphaCom with the [http://www.milestonesys.com/ Milestone] XProtect Profess
    20 KB (2,911 words) - 08:51, 16 August 2022
  • * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
    2 KB (260 words) - 09:25, 16 August 2022
  • *that the Milestone XProtect VMS is operational, with all to the system connected cameras configured ...e used for changing system type in which case you press “Load” – makes the system change – and press “Apply”.
    12 KB (1,892 words) - 04:49, 23 January 2024
  • ...digits dialed during the conversation will not trigger any feature in the ICX-AlphaCom, but the digits will be reported in the Event Handler, event 25. ...at the station is already configured and operational with the ICX-AlphaCom system. What follows are the changes needed to allow relay and I/O functions.
    10 KB (1,634 words) - 16:21, 23 June 2023
  • The ICX or AlphaCom system communicate with AMAG Symmetry via the MPC-protocol. *[http://www.amag.com AMAG™ Access Control and Security Management System]
    21 KB (3,404 words) - 09:12, 8 April 2024
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    4 KB (632 words) - 12:15, 24 October 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
    2 KB (219 words) - 13:31, 26 June 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    4 KB (640 words) - 12:15, 24 October 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
    2 KB (236 words) - 14:04, 2 May 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    4 KB (638 words) - 12:15, 24 October 2023
  • *that MOBOTIX HUB is operational, with all the system connected cameras configured ...recognized in MOBOTIX HUB as ONVIF compatible devices and are added to the system in the same way.
    14 KB (2,187 words) - 15:45, 25 May 2023
  • * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]
    4 KB (660 words) - 12:15, 24 October 2023

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)