Actions

Special

Search results

  • [[File:1-1c config.PNG|left|thumb|400px|System configuration]] ===AlphaPro===
    453 bytes (59 words) - 15:31, 17 March 2011
  • ...s a dedicated link layer which is effective for transport of address/memory-value information. ...change, and how many messages will come, so it’s not suited as a general bi-directional DP port.
    918 bytes (148 words) - 14:32, 7 September 2017
  • [[File:1-2a config.PNG|left|thumb|400px|System configuration]] ===Configuration===
    2 KB (255 words) - 10:03, 30 June 2022
  • ...o [[Users_%26_Stations_(AlphaPro)#General|'''Station Type''': ''CRM'']] in AlphaPro the display layout will change from the standard two line display to a four [[File:CRM 6.PNG|left|500px|thumb|Standard display station without any configuration having received three mail messages]]
    1 KB (236 words) - 15:11, 5 February 2018
  • ...lphaPro software version 12.1.3.0, AlphaPro supports communication with ICX-AlphaCom via HTTPS. To enable this: ...mmunication buttons''' are used to transfer configuration data between the AlphaPro PC and the AlphaCom server.
    3 KB (524 words) - 11:40, 25 March 2020
  • [[File:1-2b config.PNG|left|thumb|500px|System configuration]] * In AlphaPro, '''Users & Stations''' window, select physical port 4 and configure as fol
    860 bytes (119 words) - 10:04, 30 June 2022
  • [[File:1-3b config.PNG|left|thumb|500px|System configuration]] === Station configuration ===
    2 KB (336 words) - 10:04, 30 June 2022
  • == Configuration from AlphaPro Event Handler == == Configuration using TST console ==
    2 KB (279 words) - 12:16, 23 February 2023
  • A '''Backup''' of the running configuration on the [[AMC-IP]] board can stored on a file in the flash memory. The file, called ''back ...kup''': Dial 7820 + M from a [[SuperUser]] station. A copy of the AlphaPro configuration is stored in a backup file.
    5 KB (723 words) - 15:54, 24 January 2017
  • To load [[AlphaCom Feature List|factory default settings]] to an [[AMC-IP]] board an '''autoload''' or 'cold start' must be performed. The AMC configuration will be set to factory default by one of the following actions:
    1 KB (206 words) - 08:20, 8 September 2017
  • [[File:2-3c exercise.PNG|left|thumb|500px|System configuration]] [[File:2-3c solution.PNG|thumb|left|500px|Setting IP address on ethernet port 1]]
    2 KB (306 words) - 10:07, 30 June 2022
  • [[File:1-3c config.PNG|left|thumb|450px|System configuration]] [[File:1-3c solution1.PNG|thumb|left|250px|SoftClient: File -> Preferences window]]
    1 KB (209 words) - 10:04, 30 June 2022
  • [[File:1-3d config.PNG|left|thumb|500px|System configuration]] === Install and configure the X-Lite SIP client===
    1 KB (195 words) - 10:05, 30 June 2022
  • [[File:2-3d exercise.PNG|left|thumb|500px|System configuration]] [[File:2-3c solution.PNG|thumb|left|500px|Setting IP address on ethernet port 1]]
    2 KB (307 words) - 10:07, 30 June 2022
  • This article describes how to configure the [[IP-LCM|IP-LCM Module]] when used with an AlphaCom server. == Basic configuration ==
    4 KB (584 words) - 10:35, 22 April 2024
  • ...(500) Internal Server Error" when doing a SendAll or GetAll operation from AlphaPro, it can be due to several reasons: 2. Redundant Server (IPHA) system: The error message appears if AlphaPro version 12 (or newer) is configured to communicate with the Secondary serve
    1 KB (209 words) - 10:53, 24 October 2023
  • This article describes how to configure the [[IP-LCM|IP-LCM Module]] when used with an AlphaCom server. == Basic configuration ==
    4 KB (593 words) - 13:31, 14 December 2022
  • * From [[AlphaWeb#Time_Manager|AlphaWeb]], in the ['''System Configuration'''] > ['''Time and Date'''] menu ...ime'''] button in the Communications window (This feature is obsolete from AlphaPro 11.5.x.x)
    785 bytes (114 words) - 18:27, 16 March 2015
  • *The remaining configuration is done from the web interface *Log on to the phone via your web-browser using the IP address entered above
    1 KB (167 words) - 22:31, 10 October 2017
  • == AlphaWeb Configuration == * The SIP protocol must be enabled in the [[AlphaWeb#Filtering.2C_the_AMC-IP_firewall|firewall]]. Enable port 5060 on the desired Ethernet port. Port
    4 KB (569 words) - 09:35, 16 April 2019
  • ...VRAM/Customer Database versions are different, the running intercom (AMCd) configuration will automatically be deleted and factory default settings will be loaded. ...NVRAM version 10.50, but an upgrade from 10.30 to 10.60.3.14 will set the configuration to factory defaults.
    2 KB (243 words) - 14:43, 29 May 2019
  • [[File:1-1c config.PNG|left|thumb|400px|System configuration]] ===AlphaPro===
    2 KB (334 words) - 10:03, 30 June 2022
  • [[File:1-3a config.PNG|left|thumb|450px|System configuration]] * Select '''Setup''' to enter the off-line menu. Password: 1851
    3 KB (406 words) - 10:04, 30 June 2022
  • *'''Software''': The Turbine Station must have sw version TCIS-3.0.3.3 or newer. The MRBD has 6 jumpers (S1-S6) which determines if the relay should be triggered on active "high" signa
    3 KB (482 words) - 16:23, 23 June 2023
  • A wav file with the wanted ringing tone must be uploaded to the ICX-AlphaCom or AlphaCom XE via the web interface. * AlphaPro 11.6.3.8 or later
    3 KB (415 words) - 10:38, 7 November 2022
  • ...e global number ([[Call remote station feature|feature 83]]) as entered in AlphaPro === Configuration of AlphaCom E ===
    1 KB (173 words) - 10:13, 16 August 2022
  • Previous Release - [[AlphaPro 11.6.x - Release Notes]] Next Release - [[AlphaPro 12.0.x - Release Notes]]
    4 KB (578 words) - 05:31, 8 March 2022
  • [[Image:Grandstream GXP2000.png|thumb|Grandstream GXP-2000]] This article describe how to configure the Grandstream GXP-2000 IP telephone to work with the AlphaCom XE.
    4 KB (604 words) - 22:31, 10 October 2017
  • ...article describes best practice to replace an AlphaCom XE1 with an AlphaCom-ICX500 ...should be upgraded to latest version. [[AMC-IP software upgrade (Black AMC-IP board)|upgrade procedure]].
    856 bytes (121 words) - 10:19, 25 September 2020
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:VAD principle.png|200px]]</td>
    5 KB (707 words) - 15:47, 25 October 2023
  • *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (236 words) - 14:04, 2 May 2023
  • ...Center Software to ICX-AlphaCom or AlphaCom XE and intercom stations in SIP-mode. Sipelia is a small IPBX. Security Center operator positions have a SIP-client which register with Sipelia.
    2 KB (302 words) - 15:07, 26 June 2023
  • [[File:IPDM-V2-P-newZ.png|thumb|400px|IP Desktop station 1008400000 (IPDM-V2)]] *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (207 words) - 13:37, 29 January 2024
  • *Set-up of [[Audio Program]] or [[Simplex conference]] to a group. ...rger groups than 50 members, one have to enable group call via multicast. (AlphaPro: Exchange & System > System > VoIP tab > Enable "Multicast"). See also: [[M
    2 KB (382 words) - 09:21, 30 June 2022
  • [[File:IPDM-V2-P-newZ.png|thumb|400px|IP Desktop station 1008400090 (IPDM-V2-P)]] *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (209 words) - 13:37, 29 January 2024
  • *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]] ==Configuration==
    2 KB (240 words) - 14:05, 2 May 2023
  • ...ture is by '''default active''', hence there is normally no need to do any configuration. == IC-Edge mode==
    3 KB (380 words) - 15:31, 25 October 2023
  • [[Image:UTStarcom config.jpg|thumb|right|400px|Configuration example - AlphaCom E and UTStarcom F1000G]] === Configuration of AlphaCom ===
    2 KB (349 words) - 10:12, 16 August 2022
  • ===This product is '''Discontinued''' and replaced by [[IP-CROR|1008415000 IP-CROR]]=== *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (250 words) - 14:06, 2 May 2023
  • [[Image:IPDMHB-V2-P-newZ.png|thumb|500px|IP Desktop Master with Handset V2 (1008401100)]] [[Image:IPDMH-V2-P-newZ.png|thumb|500px|IP Desktop Master with Handset V2 (1008401000)]]
    2 KB (222 words) - 13:49, 29 January 2024
  • [[File:EX1-1b.PNG|left|thumb|600px|System configuration]] *In AlphaWeb go to ''System Configuration -> Interfaces''
    1 KB (205 words) - 10:03, 30 June 2022
  • [[Image:IPDMHB-V2-P-newZ.png|thumb|500px|IP Desktop Master with Handset V2-P (1008401190)]] [[Image:IPDMH-V2-P-newZ.png|thumb|500px|IP Desktop Master with Handset V2-P (1008401090)]]
    2 KB (229 words) - 13:47, 29 January 2024
  • [[File:1-4g config.PNG|left|thumb|450px|System configuration]] [[File:1-4g solution1.PNG|left|thumb|500px|From AlphaWeb, '''System Maintenance''' ->
    2 KB (255 words) - 10:06, 30 June 2022
  • The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean room [[File:IP-CROR-newZ.png|thumb|350px|IP-CROR station (1008415000)]]
    2 KB (233 words) - 15:09, 30 April 2024
  • * [[Configuration guide for STENTOFON IP-DECT|IP Dect System 6000]] * [[Configuration guide for X-Lite|X-Lite]]
    2 KB (278 words) - 12:21, 24 February 2023
  • [[File:1-4i config.PNG|left|thumb|450px|System configuration]] [[File:1-4i solution1.PNG|left|thumb|500px|In AlphaPro, Exchange & System -> RCI, select Input 1, and program the ON and OFF actio
    1 KB (165 words) - 10:06, 30 June 2022
  • TouchLine display stations can be used for call queuing. With its 2-line display the TouchLine station is suitable to use as a simple "Guard sta ===Configuration for Call Queuing===
    1 KB (169 words) - 01:56, 15 June 2022
  • * '''Enable re-registration''': ''Enable'' [[File:Eudivusvideophone-6-2.jpg|left|thumb|500px]]
    3 KB (521 words) - 12:44, 9 June 2022
  • *HandyTone-488 is an Analog Telephone Adapter (ATA) with one FXS port *If HandyTone-488 loose power, registration or network, you get pass-through from telephone to PSTN (FXO port)
    2 KB (257 words) - 05:34, 25 March 2022
  • [[File:ICX SIP Devices.PNG|thumb|right|600px|ICX-AlphaCom as SIP Server]] ...server. This article describes how to '''create a SIP account''' in the ICX-AlphaCom to which SIP devices can register.
    8 KB (1,130 words) - 23:35, 16 March 2023
  • This article gives step-by-step instructions how to get started with [[AlphaVision]]. Main configuration steps are:
    4 KB (677 words) - 10:13, 7 June 2022
  • [[Image:AMC Black.PNG|thumb|250px|AMC-IP Processor Board (Black)]] ...ibes how to upgrade the software in an AlphaCom server, running a black AMC-IP board (hardware revision 5 or later).
    2 KB (304 words) - 15:23, 4 May 2023
  • ...ed to use [[CRM_V_-_Control_Room_Master|CRM V station]] or [[ECPIR-3P|ECPIR-3P panel]], as these devices have buttons with LEDs showing status. *Press a dedicated "Group Configuration" [[DAK]] key. The red led in key starts flashing, and the Dynamic Group is
    4 KB (649 words) - 11:13, 8 July 2022
  • The Sky-Walker Integration Platform from Entelec is a building management system whi ...t possible to set up calls, operate the M-button, for instance for Press-To-Talk operation or set the status of RCO's.
    2 KB (240 words) - 15:41, 15 August 2022
  • ...0100|IP Video Door Station with CP-CAM]] camera: '''<nowiki>(http://<Camera-IP>/mjpg/video.mjpg)</nowiki>''' ...110200|IP Video Door Station with Axis]] camera: '''<nowiki>(http://<Camera-IP>/mjpg/video.mjpg)</nowiki>'''
    3 KB (507 words) - 18:06, 11 February 2017
  • In case there is a need for serial communication between the ICX-500 and a remote application, an external Ethernet to Serial Converter is re ...onverter NPort 5230 from Moxa] to achieve serial communication with the ICX-500.
    4 KB (615 words) - 16:47, 11 October 2023
  • [[Image:IP-Flush-newZ.png|thumb|500px|IP Flush Master station (1008431000)]] * [[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    2 KB (312 words) - 14:00, 29 January 2024
  • ...ration windows are selected by pressing the menu buttons in the top of the AlphaPro user interface. '''AlphaPro menu buttons''' (click on one of the buttons below to get help for that par
    6 KB (844 words) - 11:04, 4 November 2019
  • ...P Heavy Duty Station V2|IP Heavy Duty Stations (Version 2)]] used in '''ICX-AlphaCom''' mode. ==AlphaPro Configuration==
    5 KB (718 words) - 09:30, 20 September 2023
  • ...s '''Discontinued''' and replaced by [[IP Flush Master -V2|1008431000 CRM-V-2]]=== *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
    3 KB (361 words) - 14:05, 2 May 2023
  • ...t intercom - VR3G-1|VR3G-1]] and [[Vandal Resistant intercom - VR3G-1P|VR3G-1P]]: * Tamper Alarm (ICX-AlphaCom mode)
    5 KB (848 words) - 16:01, 7 September 2023
  • |'''Description''': || Program [[DAK]] key. Dial: <dir.no> <dak-sequence> <DAK-key>, e.g. 784 + 123 + DAK key.<br>Directory number 9541 is used in the menu ...fore the reset is executed. Also after a SendChg or SendAll operation from AlphaPro the flash memory is automatically synchronized.
    1 KB (198 words) - 09:45, 8 October 2019
  • The [[Redundant Servers - ICX-AlphaCom|IP-HA system]] reports changes of the server state to the [[Event Handler]]. == Configuration ==
    3 KB (384 words) - 16:44, 28 June 2022
  • [[File:EX1-1b.PNG|left|thumb|600px|System configuration]] * In Filters settings, enable ports for AlphaPro and AlphaWeb for ethernet port 1
    569 bytes (85 words) - 11:06, 1 November 2017
  • This article describes step by step how to get started with an ICX-AlphaCom system. ...lized in the image to the right, the article will show how to set up an ICX-500 server, a Desktop station and a Help Point/Door intercom.
    9 KB (1,490 words) - 12:56, 26 February 2024
  • ...ailable in the IP settings can be found here: [[Station Web Interface - ICX-AlphaCom mode]] *ICX-AlphaCom IP address
    6 KB (954 words) - 15:15, 28 January 2022
  • ...he minimum configuration required for IP Stations to operate with an '''ICX-AlphaCom''' or '''AlphaCom XE''' server. The IP Stations are configured thro * [[Getting Started (ICX-AlphaCom)|Getting Started with ICX-AlphaCom]]
    6 KB (951 words) - 11:32, 23 June 2023
  • ...act faster and more precisely to incidents by providing operators with real-time Situational Awareness through a Common Operating Picture (COP) and foll ==ICX/AlphaCom Configuration==
    4 KB (615 words) - 10:19, 15 August 2022
  • Previous Release - [[AlphaPro 11.7.x - Release Notes]] Next Release - [[AlphaPro 12.1.x - Release Notes]]
    6 KB (847 words) - 05:32, 8 March 2022
  • ...al 9545 + 6 to trigger [[RCO]] 4 for 2 seconds, and disconnect with success-tone. Use the two-step event trigger, [[Event trigg on dialing digits|feature 105]].
    1 KB (194 words) - 11:14, 8 July 2022
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:HotlineCall3.PNG|300px]]</td>
    2 KB (328 words) - 09:58, 24 May 2022
  • ...tions [[TFIE-1]] and [[TFIE-2]], and the Turbine kits [[TKIE-1]] and [[TKIE-2]]. [[File:1008140100.PNG|thumb|350px|The TA-10 Relay Module]]
    2 KB (277 words) - 14:41, 27 June 2023
  • The '''Touchless sensor''' (item 2390020100) is an IR-sensor that connects to Zenitel IP stations, and is used to activate calls w The sensor button is powered by 5 volts. Most Zenitel IP stations has a built-in 5V output which can be used to power the sensor button.
    3 KB (371 words) - 10:21, 24 October 2023
  • Here is configuration guide for the current [[Configuration_guide_for_IP_Heavy_Duty_v2|IP Heavy D == Keyboard configuration ==
    6 KB (896 words) - 15:04, 1 September 2022
  • [[image:AMC-IP card.jpg|thumb|250px|The red AMC-IP Board]] ...upgrade the software on a [[AMC-IP - AlphaCom Processor Board (Red)|red AMC-IP board]], hardware revision 4 and earlier.
    4 KB (620 words) - 13:03, 23 June 2022
  • ...eature '''should not exceed approx. 50 stations'''. (Not applicable for ICX-AlphaCom) == Configuration ==
    2 KB (315 words) - 15:22, 11 August 2022
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:Schedule Message.PNG|350px]]</td>
    5 KB (712 words) - 20:36, 22 July 2022
  • ...sible to operate with a mix of one and two line names. If a user has a one-line name, the second line ==Configuration==
    4 KB (606 words) - 12:59, 24 May 2022
  • The discovery function of the AlphaCom is very basic and require some pre-conditions to work. =Configuration of AlphaCom=
    6 KB (897 words) - 11:05, 8 September 2017
  • * AlphaPro 10.56 or higher == AlphaCom Configuration ==
    10 KB (1,521 words) - 12:00, 27 February 2023
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:XE1.PNG|350px]]</td>
    7 KB (1,139 words) - 13:20, 9 February 2023
  • Zenitel IMT supports two-way identification of discovered IP stations by: * receiving a button-press event from a station
    2 KB (350 words) - 13:31, 16 August 2022
  • ...s all existing stations and other boards such as [[ASLT]], [[ATLB]], [[ATLB-12]], [[AE1]], [[AGA]], [[ASVP]], [[APC]], can be kept. New AMC-IP board and AMC filter board is required:
    3 KB (502 words) - 06:12, 20 October 2020
  • The [[IPVRS-1|IP Vandal Resistant Substation]] can be fitted with a tamper switch, makin ==ICX-AlphaCom configuration==
    3 KB (488 words) - 14:05, 8 June 2023
  • [[Image:STENTOFON IP DECT Configuration Example.JPG|thumb|410px|Configuration example]] ==Configuration of AlphaCom XE==
    6 KB (954 words) - 16:01, 8 November 2021
  • *The caller can be answered from any member of the ringing group by "M-key" or "OFF HOOK" *The private ringing tone can individually be muted by pressing "C-key" at a station in the ringing group
    5 KB (796 words) - 09:22, 30 June 2022
  • [[File:2-2f exercise.PNG|left|thumb|500px|System configuration]] In AlphaWeb, '''System Configuration''' -> '''Messaging''', upload the wav-file using Message group 30, Index 3. This message will get directory number
    2 KB (380 words) - 10:07, 30 June 2022
  • |colspan="5"|Force synchronization of configuration database to flash Flash is always synchronized after AlphaPro update (SendChg/SendAll) and before software reset if any pending changes.
    1,016 bytes (137 words) - 09:54, 28 June 2022
  • {{AI}} [[File:ENA Amp block.png|thumb|800px|ICX-AlphaCom with ENA Amplifiers]] ...For a more detailed description of various settings and options, see [[ENA Configuration - AlphaCom mode]]
    4 KB (552 words) - 11:56, 9 February 2022
  • This article describes how to configure SIP Trunk integration between ICX-AlphaCom (and AlphaCom XE) and Cisco Call Manager 10.0, 11.0 or 11.5. *ICX-AlphaCom or AlphaCom XE server
    9 KB (1,392 words) - 13:26, 21 June 2023
  • ...cation with an IP speaker with microphone, the speaker must operate in "PTT-mode" (Simplex mode). ...describes how to configure "PTT-mode" when the IP Speaker is used in an ICX-AlphaCom or AlphaCom XE system.
    990 bytes (151 words) - 16:02, 2 June 2022
  • [[File:IP-ARIO.PNG|thumb|400px|IP-ARIO, Item Number: 1008095100]] * For PA integration, use [[TKIS-2]]
    2 KB (310 words) - 09:18, 16 August 2022
  • A '''Remote Control Input (RCI)''' is triggered by an external potential-free contact. Select a device from the above table to see details on connections and configuration
    6 KB (821 words) - 13:17, 9 February 2023
  • HTTP GET can be sent to third-party systems using EDO ports and Event Handler. ==Configuration==
    4 KB (557 words) - 00:56, 26 March 2024
  • ==ICX-AlphaCom Mode== * Input 1 is programmed in AlphaPro as '''DAK 11''' in DAK window. The example shows DAK 11 calling stations in
    3 KB (528 words) - 16:01, 10 May 2023
  • The call button and station LED on the [[TMIS-2|Turbine Mini 2]] must be configured. ==ICX-AlphaCom Mode==
    3 KB (522 words) - 14:46, 10 February 2022
  • ...tem from Habtech integrates with ICX-AlphaCom. This integration uses the VS-SDK for AlphaCom connecting with the AlphaNet via TCP. ===ICX-AlphaCom===
    2 KB (328 words) - 14:18, 12 February 2024
  • ...s. For redundancy using ICX-AlphaCom servers, see [[Redundant_Servers_-_ICX-AlphaCom]] <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;">
    16 KB (2,500 words) - 17:08, 28 June 2022
  • The call button and station LED on the TCIA-2 must be configured. ...A-2 is equipped with one LED in the call button, and this is the green Talk-LED.
    3 KB (548 words) - 12:51, 5 October 2023
  • ICX-AlphaCom and AlphaCom interfaces to the Total Recall range of voice recorder In the AlphaPro Recording TAB set the following properties:
    1 KB (176 words) - 03:50, 4 May 2023
  • [[Image:Auto-attendant.png|thumb|400px|The auto-attendant feature provides voice guided menus]] The '''Auto-attendant''' feature provides voice guided menus for handling incoming calls
    5 KB (641 words) - 14:59, 20 May 2022
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:DoorOpeningExample.png|500px]]</td>
    7 KB (1,107 words) - 11:16, 24 October 2023
  • ...distributed by using the [[Audio Program|Audio Program feature]] of the ICX-AlphaCom. By default this feature is using the HD Voice codec G.722. * [[TKIE-2|TKIE-2 kit]]
    7 KB (1,160 words) - 15:10, 27 October 2023
  • Exclusion is based on physical numbers. Configuration of exclusion is independent of the dir.no and name of a station, so exclusi ...w microphone sensitivity, notably gooseneck stations with directional close-talk microphones.
    7 KB (1,089 words) - 09:44, 11 January 2017
  • In this configuration Bellcommander will dial a given extension number (usually a group number) a === Enable automatic M-Key on group ===
    2 KB (313 words) - 09:45, 7 June 2019
  • ...phone used for measuring the ambient noise level. This is typically an EINS-1 microphone unit, but any [[:Category:Stations#Turbine_stations|Turbine De ...plifier]], or a PA Interface such as a [[TKIS-2|TKIS-kit]] or [[TKIE-2|TKIE-kit]].
    7 KB (1,086 words) - 17:13, 18 October 2023
  • The ECP-AA1 is delivered with factory default settings. By default, the unit's IP se [[File:ECP-AA1 config AI 1.png|700px|thumb|left]]
    4 KB (592 words) - 12:38, 9 June 2022
  • ...ine Station - 1008070010|Turbine based]] IP Hotline station, used in '''ICX-AlphaCom''' mode. ...rd. An event must be created that reports correct handset status to the ICX-AlphaCom.
    4 KB (621 words) - 14:17, 12 February 2024
  • This article describes how to configure redundant ICX-AlphaCom servers. For redundancy using AlphaCom XE servers, see [[Redundant_ <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;">
    19 KB (2,929 words) - 09:31, 1 August 2023
  • [[File:2-2a exercise.PNG|left|thumb|500px|System configuration]] In AlphaPro, '''Users & Stations''', select station 107 from the list box, and press th
    2 KB (401 words) - 10:06, 30 June 2022
  • This article provides a detailed step-by step guide to the configuration and programming of the STENTOFON IP Desktop Master Station with Video Displ ...uld have some working experience with STENTOFON software/interface such as AlphaPro and AlphaWeb.
    13 KB (2,025 words) - 13:55, 14 June 2018
  • ...ces in various FXO/FXS configurations. Although this article describes the configuration for digital interface E1 using QSIG protocol, it will also be useful when c [[Image:Config example Mediant 1000.jpg|thumb|650px|Configuration example]]
    6 KB (913 words) - 23:54, 10 February 2017
  • * '''Outgoing phone calls''': A "Short Number" is typically a 2- or 3-digit number, and when dialed you will be connected to an external phone lin <gallery caption="Short Number configuration" widths="650px" heights="520px" perrow="2">
    3 KB (473 words) - 16:38, 2 June 2022
  • ...also send the video image to a station with a video display, like the ITSV-1. ...requires a [[Licenses#SIP_station_license|SIP Station license]] in the ICX-AlphaCom server.
    11 KB (1,727 words) - 12:05, 23 February 2023
  • The VS Operator can be used together with a [[Redundant Servers - ICX-AlphaCom|redundant system]], communicating with the Operational IP address. Here is a description on how to set up monitoring so the ICX-AlphaCom statuses can be viewed in VSOP.
    10 KB (1,610 words) - 15:55, 8 November 2023
  • This article describes how to install a new flash image on the AMC-IP board, using the AlphaImageUpgrade PC tool. Note that there are two versi *'''VS-AlphacomXE.ImageUpgrade''' is used for upgrading the image file on AMC board
    5 KB (749 words) - 15:38, 15 October 2019
  • ...scribes the network guidelines of the [[:Category:ICX-AlphaCom Platform|ICX-AlphaCom]] and [[:Category:AlphaCom XE|AlphaCom XE]] platforms. ==The ICX-AlphaCom and AlphaCom XE servers==
    6 KB (905 words) - 10:42, 24 January 2024
  • ...as one node with full integration of all features. In some documents multi-module is referred to as InterCardCage, ICC. All configuration data are stored on the [[AMC-IP|AMC-IP board]] in the master [[module]]. The master module controls the resource
    6 KB (968 words) - 13:52, 5 July 2022
  • ...rcom devices: TCIS-x, TKIS-2, TMIS-x, TFIE-x, TKIE-x, TFIX-x, TCIV-x, ECPIR-3P and Exigo IP speakers. * '''VS-IMT''': Updated [[IMT|Intercom Management Tool]] PC application.
    7 KB (1,100 words) - 15:36, 11 March 2019
  • ...rcom devices: TCIS-x, TKIS-2, TMIS-x, TFIE-x, TKIE-x, TFIX-x, TCIV-x, ECPIR-3P and Exigo IP speakers. * '''VS-IMT''': Updated [[IMT|Intercom Management Tool]] PC application.
    7 KB (1,103 words) - 11:56, 5 April 2019
  • Up to 254 ICX-AlphaCom servers can be interconnected in AlphaNet. One server can have up t ==VoIP AlphaNet Configuration==
    11 KB (1,662 words) - 07:55, 5 July 2023
  • ICX-AlphaCom and AlphaCom XE use [[IP Multicast]] for transmitting Group Audio t * AlphaPro 10.40
    10 KB (1,718 words) - 16:14, 25 October 2023
  • [[Image:SDS-1.png|thumb|500px|IP Phone SDS-1 (1490000010)]] # Connect the LAN port of the phone to the RJ-45 socket of a PoE switch using the Ethernet cable. <br/> The LCD will displ
    5 KB (885 words) - 11:16, 14 February 2024
  • * SIM card based software configuration and disaster recovery ...or mounted in a 19” rack. It has room for installation of one [[AMC-IP|AMC-IP processor board]] and up to 6 [[:category:Feature boards|feature boards]]
    9 KB (1,344 words) - 17:43, 4 March 2019
  • {{AI}} This article shows how to configure the [[VS-Operator]] to control [[RCO - Remote Control Output|Remote Control Outputs ( # The VS-Operator is already installed and operational
    4 KB (609 words) - 10:55, 29 June 2023
  • [[Image:DECT-2500.png|thumb|410px|Configuration example]] ==Configuration of AlphaCom XE==
    10 KB (1,569 words) - 16:02, 8 November 2021
  • ...onfiguration and setup of IP stations, see [[IP Station Configuration - ICX-AlphaCom mode]]. '''Note:''' The off-line display menu is not available for the School IP Intercom, as the naviga
    5 KB (758 words) - 17:23, 31 January 2023
  • This article describes how substations in the ICX-AlphaCom can be configured to call external telephone number(s). {{Note|The ICX-AlphaCom and SIP Gateway must be configured to use '''One Stage''' (Enbloc)
    9 KB (1,398 words) - 12:28, 24 February 2023
  • * '''Board error''': Red light. The [[AMC-IP]] board can no longer find one or more boards in the exchange. Could be d ...''' Red light when the RCI is active. Requires software configuration from AlphaPro, [[Exchange_%26_System_%28AlphaPro%29#Inputs|Exchange & System > RCI]]. Set
    1 KB (243 words) - 14:01, 1 June 2018
  • This article provides the release notes for '''ICX-500''' and '''ICX-Core''' software 1.0.3.x with incremental bug fix releases. The release not '''VSF-ICX-500''' is a firmware archive for the ICX-500 Intelligent Gateway platform.
    7 KB (977 words) - 05:08, 8 March 2022
  • [[Image:Recording ODC AGA.png|thumb|300px|Recording of conversations - configuration example]] ...g of conversations. The general concept is to convert a conversation to a 3-party duplex conference. The 3rd party is an [[AGA]] port. The audio from th
    7 KB (1,079 words) - 11:13, 8 July 2022
  • ...our case, the DHCP server is configured with IP addresses 1-99=static, 100-255 DHCP automatic. Install Cisco-customed Windows 2000 from bootable DVD.
    13 KB (1,981 words) - 12:33, 15 August 2022
  • ...gits dialed during the conversation will not trigger any feature in the ICX-AlphaCom, but the digits will be reported in the Event Handler, event 25. ...y, the examples show only two devices being controlled – one with the built-in relay and one with an I/O port. For control of more devices, simply expa
    10 KB (1,634 words) - 16:21, 23 June 2023
  • ...s information. It is not possible to use Modbus TCP to send commands to ICX-AlphaCom.}} ==ICX-AlphaCom and the Modbus TCP protocol==
    8 KB (1,365 words) - 11:11, 4 December 2023
  • ...to subscribe to an AlphaCom server/exchange. To do this, your PC and the IP-ARIO unit have to be connected together via a PoE switch using network cable * Connect the '''LAN''' port on the IP-ARIO unit to the PoE switch
    10 KB (1,524 words) - 13:08, 21 September 2018
  • {{I}}[[Image:ICX-510 gateway.PNG|thumb|500px|The ICX-510 Gateway]] *'''ICX-510-IA Gateway'''. Item no: 1002000110, available as from January 2024.
    9 KB (1,438 words) - 11:28, 25 January 2024
  • [[Image:STENTOFON IP DECT Configuration Example.JPG|thumb|410px|Configuration example]] ==Configuration of AlphaCom XE==
    12 KB (1,892 words) - 16:01, 8 November 2021
  • * Cisco Unified Call Manager version 6.1.2.1000-13 ...our case, the DHCP server is configured with IP addresses 1-99=static, 100-255 DHCP automatic.
    15 KB (2,262 words) - 12:36, 15 August 2022
  • * Cisco Unified Call Manager version 8.0.3.20000-2 ...o tested and verified for Cisco Call Manager 7 (tested version: 7.1.5.30000-1).''
    15 KB (2,250 words) - 12:42, 15 August 2022
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:Scheduler TRF Draw.PNG|200px]]</td>
    4 KB (571 words) - 14:59, 11 August 2022
  • [[Image:2200003000 RS.jpg|thumb|600px|GSM Gateway MV-370]] Alternative solution: [[IP Telephony Service (ICX-AlphaCom)]]
    12 KB (1,892 words) - 15:14, 16 April 2024
  • ...a [[:Category:Stations#Turbine_stations|Turbine device]] is reported in ICX-AlphaCom or AlphaCom XE, and how you can control the outputs and relay(s) of ...ct as an input or an output is defined in the [[Station_Web_Interface_-_ICX-AlphaCom_mode#I.2FO_Settings|web page of the Turbine device]]. By default al
    3 KB (461 words) - 11:21, 23 June 2023
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:AudioSettingsAdv.PNG|500px]]</td>
    12 KB (1,733 words) - 18:14, 12 February 2024
  • [[image:Control Room Master IV.jpg|thumb|250px|CRM-IV with all optional modules]] * Compact flush mount station with single-touch keys and 4x20 character display with backlight
    5 KB (699 words) - 14:39, 14 June 2018
  • ...MV370.PNG|thumb|500px|right|Application example: Sending line errors in ICX-AlphaCom as SMS message]] This article describes how information can be sent from the ICX-AlphaCom (or AlphaCom XE) to a mobile phone as a SMS message. This could for
    13 KB (1,988 words) - 12:08, 23 February 2023
  • * SIM card based software configuration and disaster recovery The cabinet has room for installation of 26 circuit boards in total: one AMC-IP processor board, one APC program & clock board, and up to 24 feature boar
    7 KB (1,017 words) - 15:22, 27 February 2018
  • == AlphaCom configuration == The Snom phone must be configured as a SIP User in AlphaPro, '''Users & Stations'''. See article [[SIP phone as station]] for details.
    10 KB (1,486 words) - 12:43, 9 June 2022
  • ...hich connects Feenics with a locally deployed Zenitel system. Multiple ICX-AlphaCom exchanges can be combined and incorporated into Feenics, providing ...ely. The associated list of stations will automatically import once the ICX-AlphaCom is added to the instance via its MAC address.
    14 KB (2,263 words) - 10:03, 12 May 2023
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> ...e="display: block; vertical-align: bottom;">[[Image:Siemens Sivelliance_ICX-AlphaCom.png|400px]]</td>
    14 KB (2,080 words) - 13:42, 4 December 2023
  • [[File:ITSV-2 ICX.png|thumb|right|500px|ITSV-2 Phone in ICX or AlphaCom system]] This article describes how to set up the '''ITSV-2''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV
    15 KB (2,319 words) - 13:00, 17 August 2023
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:Mobotix_ICX-AlphaCom.png|400px]]</td>
    14 KB (2,096 words) - 13:47, 15 January 2024
  • DAK-labelling is stored in the station memory The station recognises 10 DAK-pages
    11 KB (1,619 words) - 09:32, 10 December 2021
  • [[File:ITSV-4 ICX.png|thumb|right|500px|ITSV-4 Phone in ICX-AlphaCom or AlphaCom XE system]] This article describes how to set up the '''ITSV-4''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV
    15 KB (2,349 words) - 15:28, 6 November 2023
  • [[File:ITSV-3 ICX.png|thumb|right|500px|ITSV-3 Phone in ICX or AlphaCom system]] This article describes how to set up the '''ITSV-3''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV
    16 KB (2,396 words) - 13:00, 17 August 2023
  • [[File:ITSV-5 ICX.png|thumb|right|500px|ITSV-5 Phone in ICX-AlphaCom or AlphaCom XE system]] ...ribes how to set up the '''ITSV-5''' Video Intercom to operate in an '''ICX-AlphaCom or AlphaCom XE system'''. The ITSV can be used for audio only, or i
    15 KB (2,352 words) - 15:28, 6 November 2023
  • ...cribes how to upgrade the software of the [[ICX-500 Gateway|ICX-500 and ICX-510 Gateways]]. {{Note|ICX-500 with hardware revision .0102 requires minimum FW 1.2.3.3}}
    6 KB (1,041 words) - 11:57, 21 February 2024
  • In ICX-AlphaCom, a Global Group Call is a Group Call which spans over several [[Nod =Configuration=
    2 KB (346 words) - 16:04, 20 May 2022
  • ...hneider Access Expert with a locally deployed Zenitel system. Multiple ICX-AlphaCom exchanges can be combined and incorporated into Schneider Access Ex ...ely. The associated list of stations will automatically import once the ICX-AlphaCom is added to the instance via its MAC address.
    15 KB (2,407 words) - 09:00, 16 August 2022
  • The integration between ICX or AlphaCom and the Pro-Watch from Honeywell is via the MPC protocol. Pro-Watch supports both serial and IP data connections. AlphaCom also support bo
    8 KB (1,324 words) - 16:01, 15 August 2022
  • See also: [[Users_%26_Stations_(AlphaPro)#DAK|AlphaPro - DAK Configuration]] The DAK - Direct Access Key (also known as single-touch key), give immediate contact with 10 of your most frequently used numb
    13 KB (1,131 words) - 08:12, 22 September 2022
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:RCO usage.PNG|700px]]</td>
    9 KB (1,393 words) - 14:45, 3 November 2023
  • ...) require that Hostname is used in SIP messages instead of IP address. The configuration window for SIP Nodes now have the option to configure a SIP Trunk with Host [[Category:AlphaPro - User Guide]]
    2 KB (258 words) - 17:24, 13 December 2017
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:Milestone ICX-AlphaCom.png|400px]]</td>
    15 KB (2,257 words) - 13:06, 29 April 2024
  • ...me. The changes will take effect in regular display stations as well as CRM-III and -IV type of stations. In the example below the date and time is subs ...is recommended to make a backup of the current mdf file. In the directory AlphaPro -> Exchgs -> your exchange you will find a file with the extension .mdf. Ma
    2 KB (331 words) - 08:25, 8 September 2017
  • ...or the audio from selected stations using [[Simplex Conference]] in an ICX-AlphaCom or AlphaCom XE system. The microphone on the monitored station will ==Configuration==
    4 KB (551 words) - 10:33, 8 June 2023
  • ...dules.png|thumb|right|500px|DAK key numbering on the Expansion Module EBMDR-8]] ...sing the Call Panel [[ECPIR-3P]] together with the Expansion Module [[EBMDR-8]].
    4 KB (615 words) - 11:48, 3 May 2023
  • Previous Release - [[AlphaPro 10.xx - Release Notes]] Next Release - [[AlphaPro 11.6.x - Release Notes]]
    18 KB (2,531 words) - 05:29, 8 March 2022
  • * SIM card based software configuration and disaster recovery ...” rack. It has room for installation of 20 circuit boards in total: one AMC-IP processor board, one APC program & clock board, and up to 18 feature boar
    8 KB (1,256 words) - 13:24, 24 April 2023
  • ...control room applications. This article describes how to configure the CRM-V station when used with an '''AlphaCom''' server. ...which can be extended with up to two IP [[IP Flush Master DAK-48 Module|DAK-48]] Units and a [[IP Flush Master Handset|handset module]].
    12 KB (1,835 words) - 14:12, 26 April 2024
  • ...tions only the name ICX will be used when there is no confusion between ICX-AlphaCom and AlphaCom). ====ICX-AlphaCom====
    7 KB (1,035 words) - 15:42, 1 December 2022
  • * '''Group Number''': The group ID 1-250 ...tivate it. To set Group Access Level on a station, see [[Users & Stations (AlphaPro)|Users & Stations]]
    10 KB (1,579 words) - 23:22, 23 April 2018
  • In AlphaPro, select '''Exchange & System''' > '''Events''', and '''Insert''' a new even The event string will send a station-mail ([[$STM]]) to station 164 for all new fault codes. When a fault is remo
    2 KB (294 words) - 14:16, 31 May 2022
  • ...for program distribution. The AGA board(s) must be inserted in position 18-21. ...itting line level audio on ab-wires, and can receive line level audio on cd-wires.
    5 KB (814 words) - 15:53, 2 May 2023
  • == Configuration from Web Interface == ...associated with the unit. The recovery mode does not alter any persistent configuration data of the Mediatrix Gateway.
    10 KB (1,475 words) - 17:39, 11 February 2017
  • ...scribes how to install a new flash image on the AMC-IP board, using the VS-AlphacomXE.ImageUpgrade PC tool. Note that there are two versions of the PC *'''VS-AlphacomXE.ImageUpgrade''' is used for:
    9 KB (1,311 words) - 13:50, 18 April 2024
  • * 9085-9088: Recall to groups 2 - 5 ...ry & Features window]], select '''Insert''' and select [[PA activation, one-step|Feature 113]] and ID = local group number. Enter any free directory num
    5 KB (811 words) - 20:09, 27 September 2023
  • ...can be transmitted directly without delay, or it can be recorded by the ICX-AlphaCom and dispatched after having listened to the recording ([[recall]]). *85-88: Group Call to groups 2 - 5
    8 KB (1,320 words) - 13:43, 5 July 2022
  • ...ticular station. In stations with DAK panel with LED ([[CRM-V]] and [[ECPIR-3P]]), the green will show which station that is currently monitored. In add ...s for this function. The programming example in this article is using Dak 1-3.
    9 KB (1,426 words) - 17:54, 2 February 2023
  • The AC2000 Vingtor Stentofon interface provides seamless bi-directional communication between CEM Systems AC2000 and ICX/AlphaCom interc *SWINT-ALPHA Stentofon AlphaCom Intercom Interface
    6 KB (902 words) - 10:15, 15 August 2022
  • ...are several Call Requests at the same time, they will be queued in the ICX-AlphaCom and handled one by one. The macro [[%tin|%tin (Trunk In Use)]] is u ...4/118]] for analogue phonelines or [[Configuration guide for Mobile VoIP|MV-370]] for GSM network. The SIP gateways should be configured as described in
    5 KB (892 words) - 12:23, 23 February 2023
  • [[File:1-4h exercise.PNG|left|thumb|500px|System configuration]] ...ing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.).''
    2 KB (355 words) - 10:06, 30 June 2022
  • Previous Release - [[AlphaPro 11.xx - Release Notes]] Next Release - [[AlphaPro 11.7.x - Release Notes]]
    14 KB (1,941 words) - 05:30, 8 March 2022
  • [[Image:Mes SIM XE20-26.jpg|thumb|300px|STIC - STENTOFON Identity Card]] [[File:STIC holder.PNG|thumb|300px|Location of the STIC holder on the AMC-IP board]]
    8 KB (1,431 words) - 13:45, 7 September 2021
  • ...ux uses a Command Line Interface (CLI). This CLI can be accessed via the so-called Linux Console. *Direct access to the AMC-IP memory (NVRAM) via the [[TST console]]
    4 KB (609 words) - 10:28, 10 February 2020
  • [[File:ITSV-1-AlphaCom.png|thumb|right|500px|ITSV-1 IP Phone in ICX or AlphaCom system]] This article describes how to set up the '''ITSV-1''' Video Intercom to operate in a '''ICX or AlphaCom system'''. The ITSV c
    13 KB (2,014 words) - 15:10, 16 March 2023
  • =Single Station Configuration= In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System ->
    6 KB (918 words) - 13:55, 14 June 2018
  • ...he will become the Active User. The Active User doesn't have to keep the M-key pressed while talking ...y is released the Active User shall continue to talk without pressing the M-key
    5 KB (837 words) - 14:35, 31 May 2022
  • <table style="float:right; max-width:80%; border-style: double; border-color: #c7c7c7;"> <td style="display: block; vertical-align: bottom;">[[Image:Silent Al Diagram.PNG|400px]]</td>
    12 KB (1,938 words) - 17:11, 4 January 2023
  • The '''MultiConference''' is a feature in the ICX-AlphaCom and AlphaCom XE systems, that makes it possible for operators to li ...ck to all active conferences at the same time is made by pressing the PTT/M-key, or by pressing a preconfigured "Multitalk" DAK key.
    26 KB (3,767 words) - 16:29, 8 February 2023
  • The AEOS <-> AlphaCom interface is a bi-directional connection, based on the Socket interface on the AEOS side and a The link is actualized on the basis of local intercom server ICX-500/ICX-Core to AEOS, without the inclusion of AlphaNet.
    12 KB (1,764 words) - 13:04, 19 March 2024
  • ...to connect Vipedia PAVA system with the ICX-AlphaCom system using a [[TKIE-2]] kit. * Group Calls launched within the ICX-AlphaCom can include zones(s) in the Vipedia PAVA system
    7 KB (1,287 words) - 12:18, 17 November 2023
  • * [[Milestone XProtect - ICX-AlphaCom Integration]] * [[Milestone XProtect - IC-Edge Integration]]
    15 KB (2,309 words) - 08:50, 16 August 2022
  • Enter the AlphaCom IP address in the web-browser [[Image:AW-ManagementConsole_10.png|right|750px|thumb|Main Menu]]
    15 KB (2,193 words) - 14:57, 7 September 2017
  • This article provides the release notes for '''ICX-500''' and '''ICX-Core''' software 1.1.3.x with incremental bug fix releases.The release notes '''VSF-ICX-500''' is a firmware archive for the ICX-500 Intelligent Gateway platform.
    10 KB (1,462 words) - 05:09, 8 March 2022
  • [[Image:1009202100.PNG|thumb|250px|AMC-IP Processor Board<br>(1009202100)|alt=]] ...shipment. The AMC-IP board is the main CPU card in the server. The server configuration is stored on ths board, and it handles all call processing.
    4 KB (599 words) - 01:35, 25 June 2021
  • {{note|Note: This article relates to the integration between OnGuard and ICX-AlphaCom, or AlphaCom with software version 13.1.3.3 or newer. For older Alp This article describes the interface of Vingtor-Stentofon ICX and AlphaCom XE platforms with OnGuard. OnGuard users will be
    15 KB (2,238 words) - 10:20, 24 October 2023
  • ...ssage. The operator must acknowledge the alarm by pressing a digit, and two-way voice communication is established between the operator and the elevator In the following configuration examples there is a possibility of defining up to 6 different telephone num
    15 KB (2,374 words) - 12:09, 24 February 2023
  • {{AI}} [[File:ENA Amp block.png|thumb|800px|ICX-AlphaCom with ENA Amplifiers]] ...r web interface. The ICX-AlphaCom server is configured using the PC tool [[AlphaPro]].
    21 KB (3,026 words) - 15:36, 14 January 2022
  • [[Image:AlphaPro Audio Event subevents.jpg|thumb|300px|Sub-event flags in the Audio Event]] ...re not associated with a "When Related to" number. In [[AlphaPro]] the sub-events can be selected after clicking the ''''Details''''-button.
    6 KB (909 words) - 09:57, 4 October 2019
  • [[File:HA config.PNG|thumb|150px|Redundancy by duplicated AMC-IP cards]] This article describes how an AlphaCom XE system can be equipped with dual AMC-IP cards in order to reduce and minimize system downtime.<br>
    8 KB (1,360 words) - 16:35, 28 June 2022
  • ...how you connect intercom audio calls to Microsoft Teams, by connecting ICX-Alphacom to the Microsoft Certified Audiocodes Mediant 800 SBC solution. ...tput) from the Teams client, using the dialpad ( (by default digit 6 in ICX-AlphaCom triggers the relay)
    12 KB (1,927 words) - 09:47, 16 February 2023
  • This article describes how the ICX-AlphaCom system can be configured to control call setup between pairs of sta * Silently Listen-In on an active conversation. Talkback is possible.
    11 KB (1,810 words) - 11:53, 10 February 2023
  • ...configuration, and then you must do a SendAll from AlphaPro to restore the configuration.<br /> All AlphaWeb configuration will be kept.<br />
    16 KB (2,365 words) - 05:51, 8 March 2022
  • [[File:AlphaWeb general.JPG|right|450px|thumb|AlphaWeb - Monitoring and configuration interface]] ...stem. The AlphaWeb server provides functions for system monitoring, system configuration, and system upgrade.
    30 KB (4,635 words) - 09:19, 16 August 2022
  • ...for easy interoperability with telephone systems. Via SIP Trunking the ICX-AlphaCom can be interfaced to: [[File:SIP Trunk ICX.png|thumb|500px|SIP Trunking with ICX-AlphaCom or AlphaCom XE]]
    34 KB (5,437 words) - 16:32, 25 October 2023
  • ...e basic logging in the [[VS-Operator]]. Information can be logged to the on-screen journal ('''Show''') and/or to disk ('''Log'''). ...ION ||align=center| Warning || Triggers on "custom parameter" send from ICX-AlphaCom when Door Opening is activated
    5 KB (796 words) - 13:43, 8 November 2023
  • ...ion guide for AudioCodes MP114 118 - Configuration example.jpg|thumb|450px|Configuration example]] ...article describes the setup of the AlphaCom E system and the AudioCodes MP-114/118 SIP Gateway, firmware version 4.8, 5.0 and 5.2. The article covers t
    28 KB (4,318 words) - 23:56, 10 February 2017
  • ...describes how to set up AlphaCom, Cisco Call Manager 6, Mediant 1000 and MP-114 for application External Communication.<br> [[Image:External_Communication_Transcoding.jpg|thumb|right|500px|Synoptic configuration example]]
    31 KB (4,690 words) - 12:45, 15 August 2022
  • The ICX or AlphaCom system communicate with AMAG Symmetry via the MPC-protocol. *[https://5b393dae-7185-4776-bec2-756ed3cf4652.filesusr.com/ugd/ad4185_2034ad7a48434da98f741615a02af20d.pdf Th
    21 KB (3,404 words) - 09:12, 8 April 2024
  • ...rcom Station is equipped with an inductive loop for deaf persons and a back-lit and embossed call button for visually impaired people. =Configuration=
    9 KB (1,415 words) - 12:52, 23 June 2022
  • ...-Turbine 6.4 describe new features, improvements and issues fixed after VSF-Turbine 6.2.3.1. '''Name:''' VSF-Turbine <br>
    12 KB (1,908 words) - 12:53, 17 August 2022
  • When used as PA interface some of the IP-ARIO inputs are used for reporting failure state of 1 or 2 amplifiers.<br> ...s are reported as sub events on the [[Faulty_Station_Line_(Event_Type) | 13-Faulty Station Line]].<br>
    6 KB (848 words) - 15:12, 5 February 2018
  • * [[Milestone XProtect - ICX-AlphaCom Integration]] * [[Milestone XProtect - IC-Edge Integration]]
    20 KB (2,911 words) - 08:51, 16 August 2022
  • This article describes how to install and configure the '''VS-OPC Classic''' on a Windows computer, and how to test that the server is ope The VS-OPC Classic is used with the ICX-AlphaCom and the AlphaCom servers.
    20 KB (3,196 words) - 11:00, 24 October 2023
  • [[File:ICX and stations.png|thumb|400px|ICX-AlphaCom Intercom System]] ...ough the web interface of Zenitel IP Stations when operating with an '''ICX-AlphaCom''' or '''AlphaCom XE''' server.
    9 KB (1,413 words) - 13:26, 12 January 2024
  • [[File:ICX Web NodeInfo.PNG|right|750px|thumb|The web interface of the ICX-500 Gateway]] This article describes the web interface of the ICX-500 Gateway.
    35 KB (5,405 words) - 10:37, 22 February 2024
  • ...rd is the PSIM software from Advancis. Integration between WinGuard and ICX-AlphaCom or AlphaCom XE system is via the ACDP protocol ([[AlphaNet Data Pro ...license is required in order to enable the ACDP protocol: 1002602400 - ILI-IF Interface enabling
    21 KB (3,279 words) - 14:45, 30 June 2023
  • ...n be assigned to each conference from [[Open Duplex Conferences (AlphaPro)|AlphaPro - Duplex Conference window]]. * A total of 32 users (in ICX-AlphaCom, 16 users in AlphaCom XE) can join the duplex conference feature at
    19 KB (2,911 words) - 15:11, 1 March 2023
  • ...configuration, and then you must do a SendAll from AlphaPro to restore the configuration.<br /> All AlphaWeb configuration will be kept.<br />
    21 KB (3,160 words) - 05:52, 8 March 2022
  • ...article describes the setup of the AlphaCom E system and the AudioCodes MP-114/118 SIP Gateway, firmware version 5.4 and 5.6. The article covers the mo [[Image:AlphaCom-Configuration.jpg|thumb|300px]]
    36 KB (5,531 words) - 15:49, 15 October 2019
  • '''Software released date:''' 2010-04-22<br /> ...configuration, and then you must do a SendAll from AlphaPro to restore the configuration.<br />
    16 KB (2,432 words) - 05:49, 8 March 2022
  • ...mmended. The latest version for AlphaCom can be [[Downloads#AlphaCom_.28AMC-IP.29_software|downloaded here]]. <br/> The AMC-IP software includes the following software routines:
    19 KB (3,032 words) - 10:53, 8 July 2022
  • '''Installation Package:''' VS-OPC Classic for AlphaCom_Setup_V6.0.3.1.msi = VS-OPC Classic for AlphaCom 6.x.x.x =
    9 KB (1,211 words) - 11:42, 9 February 2023
  • See also article [[IP Telephony Service (ICX-AlphaCom)]] ...article describes the setup of the AlphaCom XE system and the AudioCodes MP-114/118 SIP Gateway, firmware version 6.2. The article covers the most commo
    39 KB (5,908 words) - 15:59, 19 February 2024
  • *1 x Memory stick including SoftClient, AlphaPro database, CCTV software and documentation The AlphaPro database can also be downloaded from the [[Downloads|download page]].
    22 KB (3,405 words) - 16:01, 15 October 2019
  • ...e hop-count/options fields are removed all together when sent on port 0 to AlphaPro. ...The hop count (initially 0) is used for graceful handling of data routing configuration errors, by increasing it for every hop and discarding looping messages afte
    5 KB (776 words) - 14:46, 5 February 2018
  • ...the same device. All requests from Zenitel devices are received via the ICX-AlphaCom node. The RTP media flows directly between the RtpDaemon and the SI SIP interfacing in ICX-AlphaCom is configured in AlphaPro.
    23 KB (3,518 words) - 13:45, 23 February 2023
  • In AlphaPro [[Exchange_%26_System_%28AlphaPro%29#Logs_and_Errors|Exchange & System > Sy Oct 11 14:06:21 src@Johnson AlphaLog: N001.D065:.Exch:@D65.B01-2 Line Down: CD Open St 2 "102 -"
    14 KB (2,142 words) - 15:55, 17 October 2019
  • ...sion 13.1.3.3 or newer, please refer to the article [[LenelS2_OnGuard_-_ICX-AlphaCom_Integration]]}} ...between LenelS2 OnGuard and the IC-Edge system, see [[LenelS2 OnGuard - IC-EDGE Integration|here]].
    24 KB (3,745 words) - 16:18, 15 August 2022
  • * [[Milestone XProtect - ICX-AlphaCom Integration]] * [[Milestone XProtect - IC-Edge Integration]]
    23 KB (3,435 words) - 08:51, 16 August 2022
  • ==SYSTEM BUILD-UP AND DESCRIPTION== * AlphaPro and AlphaWeb are used for the AlphaCom Audio Server part
    30 KB (4,608 words) - 10:23, 11 January 2017
  • {{I}} This article lists licenses available for ICX-500 and ICX-AlphaCom Core. All licenses can be stacked. * ''From factory there is a '''20-day free license period''' during which all features can be used without the
    11 KB (1,604 words) - 12:28, 16 February 2024
  • == AlphaCom Configuration == ...o set up a SIP Trunk in the AlphaCom is described here: [[SIP trunk node - configuration]]
    27 KB (4,026 words) - 23:55, 10 February 2017
  • *AlphaPro 9.21 or later ==Decide the configuration starting point==
    43 KB (6,436 words) - 11:02, 20 September 2022
  • [[Image:MCS-Picture-1.PNG|thumb|400px]] * Access to more than 10 Single-touch keys on one station for quick and easy handling of calls to and from a
    25 KB (3,861 words) - 13:57, 14 June 2018
  • The AE1 board provides AlphaCom with two [http://en.wikipedia.org/wiki/E-carrier E1] or [http://en.wikipedia.org/wiki/Digital_Signal_1 T1] telecom in * AlphaNet and multi-module links
    45 KB (7,196 words) - 13:39, 14 June 2018
  • ...must do a SendAll from AlphaPro to restore the configuration. All AlphaWeb configuration will be kept. '''Name:''' alpha-sys_13.1.3.13.apkg <br> bsp_32.03.3.11.apkg <br>
    23 KB (3,359 words) - 15:40, 4 May 2023
  • * SIP-based active recording for AlphaCom XE ...r of calls ||align=left|To be recorded, a call must include 1 out of 10 pre-defined directory numbers||align=left| ||
    40 KB (6,015 words) - 10:29, 30 June 2021
  • ...Foundation OPC Core Components or Advosol OPC Core Components for 32-bit/64-bit operation ...r 61113. This port(s) must be opened in the [[AlphaWeb#Filtering.2C_the_AMC-IP_firewall|Filter settings]] in AlphaWeb.
    24 KB (3,568 words) - 14:46, 27 March 2024
  • =VSF-INCA 2.7= '''Name:''' VSF-INCA <br>
    9 KB (1,353 words) - 05:22, 8 March 2022
  • ...must do a SendAll from AlphaPro to restore the configuration. All AlphaWeb configuration will be kept. ===MTN-1811 SIP Trunks Stops Working if Maximum Number of AlphaNet links Configured
    15 KB (2,269 words) - 05:53, 8 March 2022
  • '''Software released date:''' 2007-04-12<br /> ...cold started, and then you must do a SendAll from AlphaPro to restore the configuration.<br /><br /><br />
    31 KB (4,702 words) - 05:45, 8 March 2022
  • The Manufacturer of the Field Equipment (Zenitel ICX-AlphaCom or AlphaCom XE) delivers an OPC Server Application. The communicat *Emulate station keyboard (dialing, M-key, C-key, DAK button)
    9 KB (1,622 words) - 02:39, 9 December 2022
  • =VSF-INCA 2.5= '''Name:''' VSF-INCA <br>
    15 KB (2,328 words) - 05:21, 8 March 2022
  • ...:#ffd400; margin-top:0.5em; margin-bottom:0em;border:1px solid silver; text-align:center;" | style="width:maximum; text-align:center; white-space:wrap; color:#000;" |
    65 KB (8,739 words) - 10:02, 2 May 2024
  • ...to the [http://en.wikipedia.org/wiki/MAC_address MAC address] of the [[AMC-IP]] board. ...enses for the ICX-AlphaCom see this article: [[Licenses for ICX-500 and ICX-AlphaCom Core]] }}
    16 KB (2,323 words) - 13:21, 18 September 2023
  • The Software House CCURE 9000 can be integrated with the ICX-AlphaCom system or the AlphaCom XE system. This article assumes that the reader is familiar with setup and operation of C-Cure 9000. Only points which are specific to ICX/AlphaCom and to its connect
    25 KB (3,866 words) - 15:28, 27 March 2023
  • [[File:AlphaPro UsersStationsCommon.png|500px|thumb|Common information in the Users & Stati ...s by default disabled, but can be enabled be selecting from the [[AlphaPro_-_Main_Menu|main menu bar]] '''View''' > '''Users&Stations: Allow editing of
    46 KB (7,340 words) - 17:22, 19 February 2024
  • This article provides the release notes for '''ICX-500''' and '''ICX-Core''' software 1.2.3.x with incremental bug fix releases. The release note '''VSF-ICX-500''' is a firmware archive for the ICX-500 Intelligent Gateway platform.
    9 KB (1,335 words) - 11:59, 21 February 2024
  • * Provides connectors for 3 MRBD Multi-Relay Boards with drivers * Easy programming of the unit from the AlphaPro programming tool for PC
    35 KB (5,715 words) - 13:58, 3 November 2016

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)