Actions

Special

Search results

Create the page "AS" on this wiki! See also the search results found.

Page title matches

  • SIP phone as station
    {{A}}[[File:SIP phones.PNG|thumb|right|500px|AlphaCom XE as SIP Server]] ...s are related to [[physical number|"physical" numbers]] in the same manner as STENTOFON IP stations.
    10 KB (1,521 words) - 12:00, 27 February 2023
  • IP station as program
    ==Configuring IP station as Program Feed== From 11.3.3.1b it is possible to use an IP-ARIO as a program source. To achieve this an IP-ARIO with license registered to the
    887 bytes (133 words) - 11:22, 2 July 2013
  • VoIP kit as PA Interface
    This article describes how to connect use a VoIP kit as interface to an external amplifier, via the VoIP kit line out. Program an event with the physical position of the TKIS-2 as owner, event type 1 - audio, when change to ON or OFF, when related to All
    3 KB (544 words) - 14:15, 26 May 2023
  • Display DAK as directory numbers
    709 bytes (99 words) - 09:38, 8 October 2019
  • TKIE - Using the loudspeaker as microphone
    ...scribes how the loudspeaker connected to a [[TKIE-2]] kit also can be used as a microphone. To operate the relays, an event must be created with the TKIE-2 kit as the Event Owner:
    3 KB (438 words) - 09:15, 5 July 2022
  • ECPIR-3P as Paging Console
    ...cle describes how to configure the ECPIR-3P with optional Expansion Module as a dedicated PA Paging Console ...1 - 3 and 11 - 18 configured with Intercoms and Public Address Amplifiers as required
    2 KB (342 words) - 14:07, 31 May 2022
  • Inputs as Key Matrix (ICX-AlphaCom)
    ==Use Inputs As Key Matrix== [[File:IO as matrix ICX.jpg|thumb|right|500px|Diode matrix when using 3 inputs to activa
    5 KB (721 words) - 13:17, 10 August 2023
  • ITSV-4/5 as Paging Station for PAVA
    The IP-LCM will be set up as the IC-Edge Controller and in the "Directory" menu given number 100, see [[ After the settings are saved and applied you should see all the accounts as registered on the status page
    14 KB (2,142 words) - 15:54, 26 October 2023
  • GUI does not react as expected in VS-Operator
    ...tain that the station which is defined as operator is known to VS-Operator as an intercom device
    1 KB (213 words) - 10:49, 24 October 2023

Page text matches

  • Group call answer feature
    ...roup_Call.2FAnnouncements|Group Call]]. The feature is active only as long as group call is active.
    413 bytes (54 words) - 09:43, 8 October 2019
  • IP station as program
    ==Configuring IP station as Program Feed== From 11.3.3.1b it is possible to use an IP-ARIO as a program source. To achieve this an IP-ARIO with license registered to the
    887 bytes (133 words) - 11:22, 2 July 2013
  • Pulse Server
    ...e system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any [[:Category:Sta ...such systems please use any other Vingtor-Stentofon IP station type, such as TCIS-x, or TKIS-2. }}
    672 bytes (111 words) - 17:20, 7 March 2019
  • Pop-up with video (VS-Operator)
    ...ake this work well, the pop-up form must have the following properties set as shown in the image: [[File:VSOP popup.png|thumb|left|500px|Definition of a form as popup window]]
    679 bytes (112 words) - 10:50, 24 October 2023
  • UniCode supported
    UniCode as UTF-8 currently support for the DIP protocol: AlphaCom ISO 8859-1 characters 0x00 - 0x7F are coded as one byte "UTF-8" coding, no remapping. <br />
    668 bytes (98 words) - 15:02, 7 September 2017
  • (404) Not Found
    ...ing http requests (port 80). This is supported on the AlphaCom server side as from AlphaCom ver. 12
    503 bytes (70 words) - 10:52, 24 October 2023
  • $CALL command used in AlphaNet (Event Handler)
    ...can have local station dir. no. (9/x) or a global station dir. no. (83/x) as A-subscriber parameter. If the A-subscriber is a global station dir. no. th This means that the B-subscriber must be defined in that node as a local or global number.
    861 bytes (134 words) - 10:58, 1 June 2022
  • AlphaPro - Compatibility
    ...GetAll using http requests (port 80). This is supported on the server side as from AlphaCom ver. 12. However, it is possible to open AlphaPro 10 or 11 da * As from AlphaPro version 11.5 there is '''no support for serial communication'
    930 bytes (133 words) - 15:53, 4 April 2024
  • IP Station - PC on AUX port
    ...ere VLAN Id 10 is used as an example (The VLAN Id is not important as long as two different ID’s are used): ...IP station port, LAN port and AUX port as members. Here VLAN Id 11 is used as an example:
    2 KB (331 words) - 14:46, 1 November 2016
  • ST AUDIO OPT
    ...nnection: Select echo cancel, open duplex, mic only, speaker only, as well as the Station LED. |align=center|2||[[UINT4]]||colspan="3"|Connection option mask as in [[DIP]] "auo" message.
    907 bytes (135 words) - 16:10, 3 October 2019
  • Flowire CCo
    ...and FCDC1/2, FCDC1/2 should be set as "Not CCo", and one FCDC3 must be set as "CCo".}} ...Flowires as forced CCo, <u>then all the others in the cluster must be set as '''not CCo'''!</u>
    2 KB (320 words) - 13:40, 12 May 2020
  • Collecting log file (AlphaPro)
    ...mmunication program) runs, which means the log file must be copied as soon as the error has occured and before Wacs (Send/Get) is run again. }}
    603 bytes (97 words) - 10:54, 24 October 2023
  • Stentofon DotNet Libraries
    One single node as well as a complete AlphaCom node network is supported. ...lications interfacing the AlphaCom, [[VS-SDK for AlphaCom]] is recommended as a start.
    1 KB (183 words) - 11:27, 9 February 2023
  • MPC Data Protocol
    ...mapping MPC commands to AlphaCom commands one-to-one it can be thought of as a variant of the [[Data link layer#Stentofon Simple Link Layer|simple link As from software 11.2.3.5 the MPC input commands also support global numbers,
    993 bytes (157 words) - 14:24, 7 September 2017
  • DTMF During Connection
    255 = Activate "DTMF transmission mode". Succeeding digits are transmitted as DTMF tones 0-9. DAK 1 and 2 will generate "*" and "#". * When parameter 1 = 255 the DTMF tone is transmitted as long as the digit is pressed.
    2 KB (252 words) - 15:45, 20 May 2022
  • Linux
    ...re, including desktop computers, supercomputers, and embedded devices such as mobile phones and routers.
    1 KB (190 words) - 08:08, 8 September 2017
  • Fault Relay - Manual Reset
    This default error message is sent as a display mail with priority 80. This will trigger event 6 - Priority Mail Present. This event is on as long as there are priority mails in queue, and goes off when queue is empty. Displa
    1 KB (248 words) - 10:22, 25 May 2022
  • Stentofon.AlphaCom.Data.dll - Release Notes
    ...ormance to accepted standards on .NET assembly naming conventions, as well as namespace naming conventions. Also better separation of functionality like
    822 bytes (104 words) - 10:33, 26 October 2017
  • I/O Settings (Pulse)
    ...O should be used as an Input or as an Output. By default all I/O's are set as Inputs. ===Use Inputs As Key Matrix===
    3 KB (394 words) - 10:42, 9 February 2023
  • Operating the TEIV-1+
    * To define a pin code – create a csv file with 4 digits numbers as shown in the example below: * When saving the CSV file the seperation character should be defined as semicolon (;).
    973 bytes (164 words) - 09:45, 7 May 2024
  • I/O Settings (Edge)
    ...O should be used as an Input or as an Output. By default all I/O's are set as Inputs. ...contact (referred to as "NO - Normally Open"). The input can be configured as "Input NC" (NC - Normally Closed) instead. (Requires firmware 8.1.3.0 or la
    3 KB (457 words) - 11:17, 12 January 2024
  • VS-Operator Server Setup Connection Error
    ...tool cannot connect to the required SQL server instance. An error message as displayed in the picture below will be shown. * Check the name of the instance as displayed in Management Studio
    691 bytes (102 words) - 10:39, 29 June 2023
  • EA1400
    ...ker lines. The audio output channels can be monitored for line faults such as shorts circuits and ground faults. * [[VoIP kit as PA Interface]]
    830 bytes (117 words) - 13:46, 5 July 2022
  • Recorder 2.0 no audio recorded
    Incorrect Recorder Initial Configuration can cause the recorder to act as if it's working, but there are no audio packets recorded. Note that this IP Address also cannot be the link-local address (127.0.0.1), as it's used to direct the ICX-AlphaCom or AlphaCom server to send the audio p
    693 bytes (109 words) - 09:28, 14 February 2024
  • I/O Settings (SIP)
    ...O should be used as an Input or as an Output. By default all I/O's are set as Inputs. ...contact (referred to as "NO - Normally Open"). The input can be configured as "Input NC" (NC - Normally Closed) instead. (Requires firmware 8.1.3.0 or la
    3 KB (465 words) - 11:17, 12 January 2024
  • Keyboard matrix - TKIE-3
    * [[Inputs as Key Matrix (ICX-AlphaCom)]] * [[I/O Settings (Edge)|Inputs as Key Matrix (Edge)]]
    1 KB (189 words) - 18:09, 14 November 2023
  • Voice Help
    ...e carrying out the next step in a function. The help message stops as soon as you proceed (i.e. press a key).
    839 bytes (134 words) - 16:46, 24 January 2017
  • Turbine Inputs and Outputs in ICX-AlphaCom
    ...2FO_Settings|web page of the Turbine device]]. By default all I/Os are set as inputs. ...K|DAK table]], or one can use the [[Event Handler]]. DAK keys are reported as [[Station Input or Station DAK key (Event Type)|Event 30 - Station Input or
    3 KB (461 words) - 11:21, 23 June 2023
  • Private break-in
    ...rivate ringing with one-way audio. The break-in function is active as long as the station holds down the M-key. When M-key is released the conversation g
    806 bytes (116 words) - 09:39, 8 October 2019
  • %1.udp
    * Returns the [[UDP group]] memberships for station, as a decimal number. * Interpret the number as a bitmap, bit#0 is UDP group 1, bit#7 is UDP group 8.
    711 bytes (96 words) - 09:46, 4 October 2019
  • Disconnect own station from ongoing group call feature
    ...r this station. (C-press in conversation just disconnects the conversation as before). *Disconnect-from-groupcall is also available as a data protocol message [[ST GROUP DISCON]].
    953 bytes (128 words) - 09:47, 8 October 2019
  • IP-ARIO
    ...('''IP-ARIO''') unit has a wide set of hardware functions. It can be used as: ...part of IP-ARIO is used, i.e. when the IP-ARIO is used as PA interface or as a Mobile Radio interface.
    2 KB (310 words) - 09:18, 16 August 2022
  • Recorder 2.0 cannot export audio files
    ...ings properly, check the save path. If it contains special characters such as ü or similar the files will not save.
    232 bytes (34 words) - 09:28, 14 February 2024
  • Platform Icons - templates
    {{AS}} <nowiki>{{AS}} = AlphaCom + SIP</nowiki>
    1 KB (150 words) - 15:48, 26 October 2023
  • AUDIO M PATH OK
    ...IO_M_PATH_SETUP]] from one or more destination exchanges. <br />Reference: As provided in [[AUDIO_M_PATH_SETUP]]. ...rs of (node, status). Node is [[UINT1]]. Status is [[UINT1]], the value is as defined for the status in [[COMMAND_RESPONSE]]
    953 bytes (130 words) - 14:20, 6 July 2022
  • Bellcommander
    In the screenshot under, All-Call (84) is added as a destination. <br><br> '''Authorization name:'''same as User ID<br>
    2 KB (313 words) - 09:45, 7 June 2019
  • 1-2b. Analogue Stations – Substation (solution)
    ...haPro, '''Users & Stations''' window, select physical port 4 and configure as follows: ...'', select physical port 4. Then press the button '''DAK''', and configure as follows:
    860 bytes (119 words) - 10:04, 30 June 2022
  • Configuration of TMIS-2
    The call button is connected to input 1, and is by default set as input. Input 1 is programmed in AlphaPro as '''DAK 11''' in DAK window, or as subtype 11 in event 30.
    3 KB (522 words) - 14:46, 10 February 2022
  • CONN REQUEST
    ...user info given in parameter 1 (either as explicit node number L(2)101, or as a global number L9501 which points to node 2) Note: Does not work well with ATLB (telephones), as it bypasses private ringing!
    2 KB (363 words) - 13:40, 10 December 2019
  • DIVUS Videophone
    ...e video stream from the inbuilt camera. The video stream is active as long as the call is active. It is even possible to view the video without setting u ...'Enter VoIP username''': ''The directory number the mobile should register as in the AlphaCom''
    3 KB (521 words) - 12:44, 9 June 2022
  • AMC software version
    ...as some limitations with respect to bug fixing and alpha and beta testing. As from the 10.60 release a new versioning system is introduced. ...4-digit version numbering has also been introduced for IP Station software as from version 01.09.x.x.
    2 KB (264 words) - 08:28, 8 September 2017
  • TCIA-2 Call Button and Station LED
    The call button is connected to input 1, and is by default set as input. Input 1 is programmed in AlphaPro as DAK 11 in DAK window, or as sybtype 11 in event 30.
    3 KB (548 words) - 12:51, 5 October 2023
  • Auto Cancel
    ...ongoing call and setup a new conversation. <br>To start a new conversation as inquiry use [[Auto_Inquiry | Auto Inquiry]]<br> From 13.1.3.1: If during conversation, pressing the same DAK key as used for starting the call, the [[Cancel Call by pressing call button durin
    988 bytes (142 words) - 14:15, 5 July 2022
  • Ingress Protection Classification
    Ingress protection classification is most commonly known as the IP code (IEC 529). Even though it is intuitive to believe that the abbr ...dust are allowed to ingress, but only in places where it can be considered as not harmful for the device.
    3 KB (424 words) - 09:14, 30 June 2022
  • SET REQ TRANSF
    ...red in the same exchange as the station to be transfered. (Same limitation as transfer activated from station.)
    1 KB (159 words) - 12:53, 30 June 2022
  • 1-4e. Main Features – Simplex Conference, Surveillance (solution)
    [[File:1-4e solution1.PNG|thumb|left|500px|Set the station 104 as Defualt Member and Default Speaker of conference 1. Dial 8201 to monitor st [[File:1-4e solution2.PNG|thumb|left|500px|Set the station 302 as Defualt Member and Default Speaker of conference 2. Dial 8202 to monitor st
    910 bytes (126 words) - 10:05, 30 June 2022
  • OPCServerConfigurator
    ...low; Now the total number of connections in an AlphaNet has the limitation as below, where it is possible to use a single port on a single server to prov * As from AMC-IP software version 12.3.3.2 and ICX-AlphaCom 1.0.3.0 it is possib
    2 KB (306 words) - 12:20, 25 March 2020
  • Simplex Conferences (AlphaPro)
    * '''Default Member''': As soon as one or more users join the conference, this user will be forced into the co ...erence in "talk mode", i.e. he will feed audio into the conference as long as no other users are talking (i.e. pressing the M-key)
    3 KB (525 words) - 16:05, 27 September 2019
  • Answer call requests by pressing M-key
    ...all requests by pressing M-key. In this way the operation will be the same as for direct calls in private ringing mode. ...ck the ''Insert'' button and create an event with the Control Room station as the event owner, and the following properties:
    1 KB (166 words) - 11:12, 8 July 2022
  • AlphaNet Data Protocol
    * Data communication between ICX-AlphaCom and External Devices such as [[RIO]]s and PC based Control Handlers ...nternal control of the ICX-AlphaCom. [[Event Handler]] can use DP messages as general [[Event Handler#Action Commands|Action Commands]].
    3 KB (402 words) - 14:10, 18 October 2023
  • Configuration of the IP Vandal Resistant Substation TKIE
    * Input 1 is programmed in AlphaPro as '''DAK 11''' in DAK window. The example shows DAK 11 calling stations in [[ * Or as subtype 11 in event 30. The example shows input 1 calling station 101 using
    3 KB (528 words) - 16:01, 10 May 2023
  • Flowire
    ...ePlug AV] power line communications specification, only using 24 - 48 V DC as the medium. It is a network bridge between Ethernet and a PLC link. ...onverter is also capable of powering Ethernet devices attached to it, such as IP intercom stations or IP cameras.
    2 KB (239 words) - 15:28, 10 May 2022
  • Module
    One AlphaCom "card cage", contains up to 26 circuit boards (such as [[ASLT]], [[AMC]], [[APC]], [[AGA]]).
    284 bytes (41 words) - 09:08, 30 June 2022
  • IP Sub Connections
    |AUX || 10/100 Mbps RJ-45 ports for auxiliary equipment such as PC and IP camera. :* AUX port (P2): for connecting to auxiliary equipment such as a PC or IP Camera.
    1 KB (207 words) - 15:10, 5 February 2018
  • Configure 3rd party SIP devices (Edge)
    Up to 10 3rd party SIP devices, such as SIP phones, SIP Speakers, Soft Phones etc., can be registered to an [[:cate * Modify Number and Name as required (a default Number and Name will be inserted, which you can modify)
    3 KB (469 words) - 12:07, 24 October 2023
  • UDP and TCP protocol (AlphaNet)
    ...technique requires the receiver to respond with an acknowledgment message as it receives the data. The sender keeps a record of each packet it sends, an ...ivery, and it is not particularly suitable for real-time applications such as [[Wikipedia:Voice over IP|Voice over IP]]. For such applications, protoco
    4 KB (710 words) - 14:46, 5 February 2018
  • VS-OPC UA for AlphaCom - Release Notes
    This new version from Advosol provides more secure OPC-UA connections as it enables the PC-UA development platform to generate more safe certificate The AlphaNet OPC Server does not support configuring an event as a ”Condition”-event. Only “Simple” and “No-Event” are supported
    4 KB (528 words) - 14:02, 22 March 2024
  • Exchange
    ...r/slave ([[MultiModule]]) configuration. One of the modules plays the role as a master, while the other modules are slaves. Communication with the world
    268 bytes (42 words) - 09:06, 30 June 2022
  • Calling from a Substation
    ...tory numbers. Substations are useful in a wide range of applications, such as door stations with one key or elevator alarm stations programmed to call or * Key no 3 on substation 1000 704400 will not work as it makes use of the ID + LT signal, which is not supported by the AlphaCom
    900 bytes (144 words) - 16:30, 24 January 2017
  • SIP trace
    ...ly choose level 4. You will see all SIP messages on the SIP trunk, as well as the internal messages between the SIPd (the internal SIP server running on ...ly choose level 4. You will see all SIP messages on the SIP trunk, as well as the internal messages between the SIPd (the internal SIP server running on
    2 KB (279 words) - 12:10, 24 October 2023
  • Station Input or Station DAK key (Event Type)
    ...tation_Configuration#RCI_-_Remote_Control_Input|IP substation call buttons as M- and C-key]] *AMC 11.2.3.9 and lower: Input 1-6 are reported as Subevent number 1 - 6
    2 KB (292 words) - 14:25, 24 May 2022
  • IP Hotline Connections
    I/O #1 is used as an input to detect the hook switch
    275 bytes (42 words) - 13:26, 23 June 2023
  • ASVP Module
    ...o the {{AlphaWiki|ASVP - AlphaCom Stored Voice Playback Board}} running as as SW module on the {{AlphaWiki|AMC-IP - AlphaCom Processor Board}}. Like the The names are used in the file names like this (using English as the example):
    3 KB (464 words) - 14:25, 5 February 2018
  • AlphaCom Package (APKG)
    ...s a generic format handling both main AlphaCom Software components as well as other add-on software components.
    1 KB (170 words) - 02:53, 30 March 2022
  • Send Mail command $SM and Cancel Mail command $CANM used in AlphaNet (Event Handler)
    ...command must be sent to the node of the ''queuing'' station, using @<node> as a prefix, where "node" is hex value of the node. Using @'''U'''<node>,"node Same as above, but the sender will be put in Call Requester mode:
    3 KB (469 words) - 10:52, 1 June 2022
  • SJphone
    **'''DTMF tab''': Send DTMF as INFO method ...r ID. Enter the global number ([[Call remote station feature|feature 83]]) as entered in AlphaPro
    1 KB (173 words) - 10:13, 16 August 2022
  • Low Latency audio
    ...here the operator hear his own announcement from nearby VoIP devices, such as IP Speakers, Intercoms, or a PA system connected via a VoIP interface. As from '''firmware ver. 7.5.3.1''' the device software has been tuned, makin
    3 KB (500 words) - 15:47, 25 October 2023
  • Grandstream GXP2000
    *Connect the computer to the same network as the phone :'''SIP User ID''': The directory number of the phone. Must be the same as entered in the Users & Stations list in AlphaPro
    4 KB (604 words) - 22:31, 10 October 2017
  • Private Ringing mode (Event Type)
    :- The event 09 stays ON as long as the station is ringing. It behaves differently from the event 01 Audio - Pr
    1 KB (163 words) - 12:34, 8 October 2019
  • Play a customized audio message during ringing
    ...Messaging#Upload_customized_wav-files_from_AlphaWeb|uploaded to the AMC-IP as an alarm message]]. A basic or enhanced [[Licenses#Audio_Messaging_License| ...gnal.<br> The private ringing cannot be removed for a single station, only as a global setting for the whole exchange.}}
    2 KB (290 words) - 10:54, 5 May 2023
  • ENA2060 Amplifier
    ...r Emergency Intercom / Crew Communication and Public Address (PA), as well as the required Train Radio Integration, thus eliminating one entire subsystem ...lifier is a "Turbine" device, and the software is upgraded in the same way as Turbine Intercom stations.
    2 KB (270 words) - 09:55, 16 August 2022
  • Open door script does not work
    The Open Door script as described in early versions of the manual, and as part of standard scripts in early VS-Operators itself, does not work for bo
    1 KB (177 words) - 10:38, 29 June 2023
  • ECP-AA1 Dimensions & Mounting Instructions
    * Length as required
    355 bytes (52 words) - 10:54, 23 October 2019
  • Reports (AlphaPro)
    * '''Users''': This report contains information about intercom users, such as physical number, directory number an display text. ...stem. It includes directory number and display text of each group, as well as the chime signal.
    2 KB (359 words) - 17:17, 3 January 2018
  • Audio Message from Standalone IP Speaker
    Push buttons for start and stop message are wired as shown below. # Set the IP Speaker as an [[Edge Controller]]
    5 KB (692 words) - 12:33, 25 March 2022
  • TA-16
    5 speakers, including cable for VoIP kits, such as [[TKIS-2]] and [[TKIE-2]].
    356 bytes (44 words) - 15:57, 5 May 2023
  • GUI does not react as expected in VS-Operator
    ...tain that the station which is defined as operator is known to VS-Operator as an intercom device
    1 KB (213 words) - 10:49, 24 October 2023
  • PhonerLite SIP Client
    ...e video stream from the inbuilt camera. The video stream is active as long as the call is active. * '''Phone number''': ''The directory number the SIP Client should register as in the AlphaCom''
    3 KB (507 words) - 18:06, 11 February 2017
  • %1.dir
    * Returns the station [[Directory number]], as a decimal number.
    406 bytes (60 words) - 09:45, 4 October 2019
  • IP OR Station Dimensions & Mounting Instructions
    ...gh, lift the station out, making sure to keep the station at an even plane as it is lifted out from the backbox. '''''Caution! Do not lift the station at an angle as this may damage the pegs.'''''
    1 KB (218 words) - 00:27, 17 March 2017
  • Pelco Digital Sentry and CP-CAM
    ...hese settings as part of the connection URL. The frame rate and resolution as set on the CP-CAM web page will be used.
    1 KB (171 words) - 08:59, 16 August 2022
  • IP-Stations - The old directory number reappear in the station after reboot
    ...When you reboot the station it will revert to the previous number as soon as it makes contact with the ICX-AlphaCom. The same result regardless of chang
    1 KB (190 words) - 10:11, 14 December 2022
  • TFIE headset operation
    ...the speaker and microphone of the front panel of the TFIE station, as well as to the headset speaker. The headset microphone is disabled. In this mode the audio will be routed to the headset as soon as the headset is physically connected. Audio in the front panel will be muted
    2 KB (399 words) - 12:17, 23 June 2023
  • Integration with ASL PAVA - Playing prerecorded messages from ICX-AlphaCom
    Using the same hardware setup and group configuration as described in the [[Integration with ASL PAVA using the TKIE-2 kit]] article Create an scheduler event as shown in the picture below.
    1 KB (187 words) - 12:11, 17 November 2023
  • ICX 1.3.3.X - Release Notes
    ...for Ubuntu 22.04.x LTS Server containing the same functional capabilities as the ICX-500 Intelligent Gateway platform. ==Enhancements and Fixed Issues for ICX-Gateway used as Primary System Controller (PSC) in Exigo==
    3 KB (480 words) - 13:56, 21 February 2024
  • Import Users and Stations from .csv file
    * ''The .csv file must use ";" (semicolon) as field delimiter'' ...number'''> will be added as a feature 9 number with the <'''id number'''> as physical number.
    5 KB (702 words) - 13:02, 13 May 2020
  • Watchdog (IP-Station)
    ...n waits for alive signals from the software application processes. As long as these signals are received, it will update the hardware watchdog. If the si ...locally about the watchdog reset. It will appear in the AlphaCom exchange as if the station was powered down and powered back up.
    2 KB (311 words) - 14:44, 1 November 2016
  • TKIE-2
    ...ed version of our Turbine Kit range. It offers the same high quality audio as the [[TKIS-2]] Kit, but adds to the feature list with an extra RJ45 port fo This station is fully supported as from AlphaCom version 11.2.3.11
    2 KB (308 words) - 14:50, 29 January 2024
  • Language Settings (SIP)
    ...french) version of the language file by right clicking and select '''save as...''' ...e '''=''' to fit your own language. When the document is finished, save it as an ini file.
    1 KB (212 words) - 12:06, 19 May 2021
  • Language Settings (Edge)
    ...french) version of the language file by right clicking and select '''save as...''' ...e '''=''' to fit your own language. When the document is finished, save it as an ini file.
    1 KB (210 words) - 12:00, 19 May 2021
  • Language Settings (Pulse)
    ...french) version of the language file by right clicking and select '''Save as'''... ...r the "=" to fit your own language. When the document is finished, save it as an <language>.INI file.
    1 KB (219 words) - 12:30, 23 August 2019
  • Timeout of conversation (Event Handler)
    If the conversation timeout should apply for outgoing calls as well, add the following events: ...the stations concerned to a [[UDP group]], and then set the [[UDP group]] as Event Owner instead of the 'The station' in the above events.
    1 KB (188 words) - 11:32, 8 July 2022
  • Upgrade from Pulse to IC-EDGE
    ...Controller. Here is a [[Edge Controller|list showing which devices can act as Edge Controller]].
    2 KB (303 words) - 09:56, 16 August 2022
  • %1.phy
    * Returns the station [[Physical number]], as a decimal number.
    416 bytes (62 words) - 09:46, 4 October 2019
  • VS-SDK for Pulse - Release Notes
    ...nt kit that comes with APIs, tools and examples. The software is delivered as Windows Installer package. ...service. Configuration from VS-IMT was also added for stations in SIP mode as part of the VS-SDK for Pulse project type.
    2 KB (285 words) - 15:12, 27 January 2020
  • Character escape codes
    In the AlphaCom the character backslash (\) is used as escape character. ...\xhh || align=center| &nbsp; || &nbsp; || 'hh' is the ASCII character code as 2 hex digits. Note that you must use 2 digits.
    2 KB (330 words) - 15:13, 25 August 2020
  • Starting Up Turbine Station
    As an alternative you can scan the network for Zenitel devices using the [[IMT As soon as you know the IP address, you can [[Logging into an IP Station|log into the
    2 KB (320 words) - 15:57, 7 September 2023
  • Stentofon.AlphaCom.AlphaNet.dll - Release Notes
    ...ionConnect', 'OnStationDisconnect'. Stationstate updates are now automatic as part of the AlphaNetClient object. ...ormance to accepted standards on .NET assembly naming conventions, as well as namespace naming conventions. Also better separation of functionality like
    3 KB (344 words) - 14:05, 13 September 2018
  • US date order
    ...nged for the dial input for [[Absence Messages|absence messages]], as well as the date and time shown in the [[Display Features|display of the station]].
    1 KB (219 words) - 10:54, 8 September 2017
  • Self Testing Call Button (ICX-AlphaCom mode)
    ...3G-1P has internal circuitry that will physically activate the call button as if someone has pressed it. This allows for full testing of the stations op *All setup items can be changed as required
    3 KB (509 words) - 14:24, 7 September 2023
  • Main Settings - Edge Controller
    This article describes how to configure a Zenitel IP device to act as an '''[[Edge Controller]]'''. * ''Most Zenitel IP devices can act as an Edge Controller, see [[Edge Controller|full list here]]''
    3 KB (391 words) - 13:14, 12 January 2024
  • Ela-soft GEMOS - ICX-AlphaCom integration
    Select one of the available ACDP links and program as follows: Select one of the available devices and program as follow:
    2 KB (351 words) - 15:39, 15 August 2022
  • IP Video Doorstation Connections
    These connections are used as relay contacts for door lock control and external I/O devices. ...rsion 0.1 and terminal X3 for versions 0.2/0.3/1.0, pins Z1 and Z2 as well as common ground.
    3 KB (472 words) - 15:10, 5 February 2018
  • Zenitel Client Group Call
    Group call functionality in the Zenitel Client will work the same as on Turbine/INCA intercoms with some adjustment to better fit the Zenitel Cl ...roup call (dial 99) during the Group call and after the Group call as long as the Group call answer timer has not expired.
    5 KB (755 words) - 14:43, 3 March 2022
  • TKIE-3CC
    ...put connector for a keyboard matrix. It offers the same high quality audio as the [[TKIS-2]] Kit, but adds to the feature list with an extra RJ45 port fo TKIE-3CC is exactly the same as TKIE-3, except it has Conformal Coating (CC).
    2 KB (325 words) - 12:22, 23 June 2023
  • %gnv
    ...e of the NVRAM-parameter, of which the address is specified in between () (as from AMC 9.05).
    407 bytes (60 words) - 09:47, 4 October 2019
  • Zenitel Client USB Control Button
    Actions on the button are detected by the Zenitel Client as long as the application is running and is not dependent on the application having f
    1 KB (234 words) - 15:00, 3 March 2022
  • Pulse License key installation
    Some features, such as Telphopne Gateway, Third Party SIP Device, Pulse Trunk, Enterprise etc. are ...s of license handling, depending on what hardware and software are running as the Pulse Server:
    1 KB (207 words) - 14:30, 28 February 2019
  • Program Direct Access Key feature
    128 (9541) (Same function as parameter 1 = 0) '''Note:''' As from AMC 10.60.3.1 the DAK programming via the 784 code is stored in the te
    1 KB (198 words) - 09:45, 8 October 2019
  • Event Trigger without cancel tone feature
    ...vent "[[Event Trigger (Event Type)|15 - Event Trigger]]" with this station as the "event owner"
    471 bytes (60 words) - 09:47, 8 October 2019
  • Event Trigger with cancel tone feature
    ...vent "[[Event Trigger (Event Type)|15 - Event Trigger]]" with this station as the "event owner"
    464 bytes (61 words) - 09:36, 8 October 2019
  • Packet loss concealment (PLC)
    ...accept any more data. In a VoIP connection, error-control techniques such as ARQ are not feasible and the receiver should be able to cope with packet lo
    1 KB (223 words) - 11:08, 8 September 2017
  • Configuration of the VR3G-1 and VR3G-1P
    * Input 1 is programmed in AlphaPro as '''DAK 11''' in DAK window. In AlphaPro, select [[Users_%26_Stations_(Alpha Choose '''I/O Pin 2''' and set it as '''Output'''.
    5 KB (848 words) - 16:01, 7 September 2023
  • ICX-AlphaCom Core - Installation
    **ICX-AlphaCom versions as from 1.2.3.9: Linux - Ubuntu 22.04.x LTS Server **ICX-AlphaCom version 1.2.3.9 can be used as an upgrade path for Ubuntu - upgrade ICX-AlphaCom on a running system to 1.
    4 KB (596 words) - 10:20, 6 March 2024
  • Redundancy
    ...r via an IP device such as the [[TKIS-2]] or an [[IP-LCM]]. These devices, as any other IP device in a redundant system must register and communicate wit ...]. Since the ICX-AlphaCom redundancy system is using a singular IP address as the operational IP address the solution is to have the converter pointed at
    2 KB (333 words) - 15:22, 28 June 2022
  • TKIE - Using the loudspeaker as microphone
    ...scribes how the loudspeaker connected to a [[TKIE-2]] kit also can be used as a microphone. To operate the relays, an event must be created with the TKIE-2 kit as the Event Owner:
    3 KB (438 words) - 09:15, 5 July 2022
  • FCDC-3 - Backwards compatibility
    ...mixed cluster, FCDC1/2 should be set as "Not CCo". One FCDC3 should be set as "CCo" . For that reason we recommend to replace the rack side Flowires with
    1 KB (219 words) - 13:45, 20 January 2021
  • IP Flush Master and IP Flush Handset compatibility
    ...P Flush Master stations. Compatibility with the IP Flush Master station is as follows: ...unscrewing the two screws, flip the circuit board over and solder a strap as shown in the image.
    2 KB (368 words) - 13:12, 25 June 2020
  • Tamper switch
    In [[AlphaPro]], create the below event, setting the substation as the event owner: In [[AlphaPro]], create the event below, and configure an [[UDP group]] as event owner (UDP group 8 is by default all stations):
    3 KB (488 words) - 14:05, 8 June 2023
  • IMT - Crash Rescue Mode
    status line is the same as running it from "Tools > Station Rescue folder is used as TFTP root folder.
    1 KB (233 words) - 12:52, 16 August 2022
  • Inputs as Key Matrix (ICX-AlphaCom)
    ==Use Inputs As Key Matrix== [[File:IO as matrix ICX.jpg|thumb|right|500px|Diode matrix when using 3 inputs to activa
    5 KB (721 words) - 13:17, 10 August 2023
  • IP Flush Connections
    |AUX || 10/100 Mbps RJ-45 ports for auxiliary equipment such as PC and IP camera. :* AUX port: for connecting to auxiliary equipment such as a PC or IP Camera.
    2 KB (300 words) - 13:58, 6 July 2022
  • IMT - Discover Stations
    ...servers will be listed under the tab '''AlphaCom servers''', later renamed as '''ICX-AlphaCom servers'''. ...se the PC on which IMT is running needs to be connected to the same subnet as that of the factory static IP. For further details, see [[IMT - Troubleshoo
    2 KB (241 words) - 09:34, 19 June 2023
  • PAUSE
    ...the execution of events for 100 ms. The statement it to be used with care, as the the command string interpreter is blocked for other inputs during the w
    390 bytes (62 words) - 16:16, 4 October 2019
  • Multi Talkback
    ...to all active conferences at the mixer station. Will use DAK press/release as M-key
    551 bytes (72 words) - 09:21, 8 October 2019
  • VS-Operator SQL Server on a remote computer
    ...computers, setup of the SQL server instance needs special considerations, as by default the SQL server instance does not accept remote connections. ...t 'SQL Server authentication' and define a password; set 'Password policy' as required, but note that if the password expires, VS-Operator Server does no
    3 KB (389 words) - 10:39, 29 June 2023
  • Display data receiver adjustment procedure for CRM-IV
    ...AlphaCom will initialise automatically after a while but the 789 will work as well). The display should now reset.
    1 KB (229 words) - 14:06, 14 June 2018
  • Account Settings (Pulse)
    *'''Display Name:''' The name that will be shown on the display, and used as Caller ID. ...ed only if the SIP server requires authentication and is normally the same as the SIP ID.
    2 KB (282 words) - 11:13, 15 August 2017
  • Program station volume feature
    ....2.3.x the relation between the 783 volume setting and AlphaPro setting is as follows:
    2 KB (131 words) - 09:45, 8 October 2019
  • Fault Relay - Automatic Reset
    ...ange & System, System, Events and insert an event with UDP 8 (any station) as owner, event type 13 - Faulty Station, when change to ON or OFF and related ...uble error messages, but this will not influence on relay function as long as default priority level is used for priority mail queue indication.
    2 KB (329 words) - 14:18, 31 May 2022
  • Zenitel Client Main User Interface
    To define a contact as Favorite: ...be populated with favorite contact names and numbers. Contacts are defined as Favorites in the Contacts panel.
    2 KB (236 words) - 14:56, 3 March 2022
  • Zenitel Client Call Functions
    ...without entering a number by just clicking the Call key if it has been set as a DAK in Settings > Account > Direct Call Settings. As soon as the active call is terminated, the first call in the queue will be answered
    2 KB (388 words) - 14:52, 3 March 2022
  • Wireshark - capture data
    ...niffer) that can intercept and log traffic passing over the ethernet port. As data streams flow across the network, the sniffer captures each packet and * Save the captured data by selecting 'File -> Save As..'. Save the file with extension .cap. The file can be opened and the conte
    3 KB (526 words) - 12:15, 23 February 2023
  • TKIS-2
    ...used to build customized intercom or help point solutions. It is also used as an interface towards external Public Address (PA) systems. This station is fully supported as from AlphaCom version 11.2.3.7
    2 KB (292 words) - 14:51, 29 January 2024
  • IP Dummy Station
    The IP Dummy is a registered device that reacts as if there is an Intercom connected, and therefore consumes an IP License, bu An IP Dummy can be used for several applications, such as [[Stream audio from 3rd party|Streaming Audio across the Network]], or usin
    2 KB (256 words) - 10:46, 20 January 2023
  • TalkBack to active multi-conference feature
    |'''Description''': ||This feature is used as Talkback Key on MCS stations in Multiconference System.
    628 bytes (89 words) - 09:41, 8 October 2019
  • Adding additional relay(s) to a Zenitel IP Device
    ...enitel IP Stations and Devices]] are equipped with 6 I/O's which, when set as outputs, can be used together with the conventional [[MRBD|Multi Relay Boar ...with a Zenitel IP Device, the associated jumper must be set to "TouchLine" as indicated in the drawing below.
    3 KB (482 words) - 16:23, 23 June 2023
  • Manually Added Devices (Edge)
    ...it will automatically be assigned a number and name, which can be modified as required. * Modify Number and Name as required
    3 KB (485 words) - 10:37, 9 April 2024
  • Grandstream HT818
    ...o 2 SIP Servers in parallel with the 8 lines distributed to these profiles as required. *Outbound Proxy: Same as the Primary SIP Server
    3 KB (522 words) - 12:22, 23 February 2023
  • AUDIO PATH OK
    ...unction support: Indicates the capabilities the B-exchange has when acting as a B­-exchange in a conversation. Bitmask, bits counted from zero:<br /> *1 = Do not play back [[DAK]], forward DAK0,1 as DIGIT *#-
    2 KB (213 words) - 16:27, 8 February 2023
  • Wall Master Station, Standard - 1007040000
    As from late 2009 the 100704000 station is using the same PCB as is used on the display stations 1007042000 and 1007043000. * '''AlphaCom''': The station will be recognized as a display station by the AlphaCom exchange, and will be fully operational.
    2 KB (308 words) - 14:47, 15 August 2018
  • Stentofon.AlphaCom.AlphaNet.dll
    One single node as well as a complete AlphaCom node network is supported. The library includes code fo
    2 KB (237 words) - 11:27, 9 February 2023
  • SEND TXT MAIL
    |align=center|3||[[UINT1]]||colspan="3"|Mail Priority 0 - 255. Same as [[SEND_MAIL#Mail_priority]]. ...ter|5||[[UINT1]]<br />(optional 08.11)||colspan="2"|Mail Flags:<br /> Same as [[SEND_MAIL#Mail flags]].<br />-Combinations of bits allowed.<br />-Default
    2 KB (251 words) - 12:57, 30 June 2022
  • SIP Devices - creating an account
    [[File:ICX SIP Devices.PNG|thumb|right|600px|ICX-AlphaCom as SIP Server]] {{note|A license will be consumed as soon as the "SIP Station" flag is enabled in AlphaPro, regardless if the SIP device
    8 KB (1,130 words) - 23:35, 16 March 2023
  • Fader Resource
    ...ion on subchannel 0). The SBI subchannel is set in Loopback mode when used as Fader Resource.
    2 KB (255 words) - 08:17, 8 September 2017
  • INCA 2.1 - Release Notes
    ===It is possible to change station mode in the display (aswell as in the station web)=== ===Added Pulse server mode - In Pulse server mode the station can act as a server for other stations and configure Pulse stations===
    4 KB (593 words) - 05:19, 8 March 2022
  • Storage Management (Recorder 2.0)
    Activity logs consist of information detailing time as well as possibly (as applicable) the user, media device, IP addresses, etc. associated with: ...r field is empty), 14 days is the default. If this time span is configured as longer than the value for item 1, entries will be trimmed for that reason a
    7 KB (1,293 words) - 10:20, 15 February 2024
  • Gallagher
    The Gallagher server acts as a SIP client with no registration.<br> Each station should be programmed as <code>sip:default@<IP Address></code>
    2 KB (275 words) - 00:57, 3 February 2023
  • Event Trigger with parameter (Event Type)
    Build special functions such as [[Dynamic group call]] and [[Anti-nuisance control (Event Handler)|Anti-nui ...45) all succeeding digits are reported to the event handler and is trigged as Event Type 25, with subevent equal to digit dialed 0-9.
    4 KB (589 words) - 10:28, 30 March 2023
  • Backup and Restore (IP Stations)
    ...ke a backup of current XML and ZAP station configuration, it will be saved as ipst_config.tar.gz. {{Obs|The device must have the same firmware version as it had when the backup was created}}
    2 KB (247 words) - 12:06, 5 October 2023
  • Virtual Extensions
    ...be configured to a Sub Station so that each Virtual Extension is available as a data point to a PSIM application using SDK or OPC. Inputs on the rear of ...e configured with multiple Virtual Extensions, and each one can be handled as if it were a different extension with different calling routes.
    2 KB (408 words) - 22:29, 22 March 2022
  • Node
    ...n=center | 0x00 || Node 0 is interpreted by the exchange which receives it as "'''own node'''", and it will replace the value 0 with it’s own node numb ...P deamon, RingMaster deamon, M100 deamon. These interface processes appear as virtual nodes in the AlphaNet architecture, all though they are just Linux
    2 KB (252 words) - 14:46, 5 February 2018
  • Address Book (Edge)
    ...sion .CSV, consisting of Number and Name with the semi-colon character (;) as delimiter. The CSV file can contain approx. 250 names, depending on the len
    3 KB (444 words) - 12:19, 24 October 2023
  • AlphaVision - single click to call
    ...iguration''' -> '''Options''' -> '''System''' tab, enable ''''Double click as single''''. ...iguration''' -> '''Script Sets'''. Assign the script files to the statuses as shown on the screen shot.
    2 KB (243 words) - 14:22, 14 June 2018
  • Recorder 2.0 - API
    Use of the API is a licensed feature of the recorder and can be ordered as The 4 dll's, which are normally required, are distributed as part of the sample application:
    9 KB (1,458 words) - 09:54, 19 February 2021
  • ITSV-2
    ===Installing the Phone with Wall Mount (sold separately as item 1490009004)=== .... To use it, attach the stand spacers to the slots on the back of the unit as shown below.
    3 KB (462 words) - 14:48, 4 July 2023
  • TKIE-1
    ...ed version of the Turbine Kit range. It offers the same high quality audio as the [[TKIS-2]] Kit, but adds to the feature list with an extra RJ45 port fo This station is fully supported as from AlphaCom version 11.2.3.11
    2 KB (312 words) - 12:22, 23 June 2023
  • SoftClient - Release Notes
    Customers using softclients as masterstation is complaining about the fact that the volume of the ringing Note! The control only applies for local generated tones as Call Request tones.
    3 KB (395 words) - 08:50, 20 June 2019
  • CDC CMD
    1 DIAL_PIN, (dial pin code , display *) If param 7 is included, use that text as display prompt<br> 2 DIAL_NORMAL. If param 7 is included, use that text as display prompt <br>
    3 KB (371 words) - 15:43, 3 October 2019
  • Error 1713 during installation of AlphaPro
    ...the subfolders. In this case the installation will fail with "Error 1713" as a response.
    656 bytes (90 words) - 10:54, 24 October 2023
  • 2-2e. Event Trigger - Event Handler (practice)
    '''Exercise goal:''' Learn how to use the Event Trigger as a toggle feature and execute multiple actions in the AlphaCom. Learn about * The Control Room should be configured as a CRM (Control Room Master), the DAK display should be enabled, and the Nav
    2 KB (254 words) - 17:38, 6 November 2013
  • VS-Recorder 2 - Release Notes
    ...for AlphaCom conversations and associated video. The software is delivered as 2 Windows Installer packages, for server and client. ...this case it may be advisable not to define the operator stations as well, as the call will be recorded twice, once for the operator, once for the substa
    6 KB (881 words) - 15:53, 6 December 2023
  • Wake-up Calls
    This feature can be used as a '''wake-up call''', or as a reminder of an appointment. When the entered wake-up time is reached, the
    2 KB (257 words) - 15:16, 3 June 2022
  • Automatic Search
    ...AlphaCom can be used. The article is applicable to the AlphaCom XE servers as well. ...uest code '''622''' or '''623''' can be modified to have the same behavior as 627/628. This is done in [[Directory & Features (AlphaPro)|Directory & Feat
    5 KB (744 words) - 15:20, 20 May 2022
  • Grandstream HT801
    *Outbound Proxy: Same as the Primary SIP Server *User ID: The Directory Number as configured in the ICX or IC-EDGE Controller
    3 KB (492 words) - 12:22, 23 February 2023
  • SQL Database Backup and Restore
    Please see article about XML export, import and clone of single items as icon sets, scripts sets, Filter sets, Camera templates, Button matrices and In VS-Operator server setup, stop the running service. Enter database name as written in SQL server and press "Check Database".
    2 KB (295 words) - 10:49, 7 February 2023
  • Sub-Event (Event Handler)
    For station-related events, Sub Event = 255 is used as the Match-All number. The macro [[%sev]] can be used to extract the subeven
    486 bytes (75 words) - 16:18, 4 October 2019
  • Configuration guide for ECP-AA1 (SIP)
    * Ensure that the IP address of your PC is in the same range as that of the station IP ...HCP''' or '''Static IP'''. In the latter case, fill in the network details as required.
    5 KB (746 words) - 10:46, 26 November 2019
  • IP Station MAC-address updater
    ...re is only required once, following station software updates will function as expected.
    2 KB (314 words) - 13:09, 28 October 2016
  • TCIx Connections
    ...utput''': 6 general purpose I/Os are available. Each I/O can be configured as either input, output, or LED driver. These connections are used as relay contacts for door lock control and external I/O devices.
    2 KB (243 words) - 15:13, 10 May 2023
  • IP audio Gain adjustment
    ...telecom world, the standard audio level is much higher, headroom as small as 3dB is normal. Therefore AlphaCom audio needs to be amplified when sent to Values: 0 (zero) means use default values as described above. Non-zero value: the specified value is used for the matchi
    3 KB (521 words) - 14:46, 5 February 2018
  • Account Settings (Edge)
    *'''Name:''' The name that will be shown on the display, and used as Caller ID. ...ly if the Edge Controller requires authentication and is normally the same as the Number (SIP ID).
    2 KB (322 words) - 17:01, 11 January 2024
  • CONN 2 GROUP
    ...| "owner" station reference for event 38-Group Dynamic Include event. Sent as response when including stations, sub events for faults. (Default LV = empt ...st be sent to all nodes involving the new members. Trick: Send the message as node broadcast.
    2 KB (274 words) - 11:02, 2 January 2024
  • ENA2400-AC Amplifier
    {{AS}}[[File:ENA2400-AC.png|thumb|alt=ENA2400-DC.|500px|ENA2400-AC amplifier]] ...y on the [[ENA User Interface|amplifier display]] and fault relay, as well as reported to the AlphaCom server which can raise an event or forward the rep
    3 KB (484 words) - 15:30, 29 February 2024
  • AGA - AlphaCom General Purpose Audio Board
    ...general purpose audio interface which is used for multiple purposes, such as Audio Program feed, Station port with analog 0dB in/out, or communication b ...There can be up to 6 "AGA Stations" per AGA board. An AGA Station will act as a regular station, i.e. you can call it by its directory number, it can be
    5 KB (814 words) - 15:53, 2 May 2023
  • Stentofon Multidrop protocol
    The value 0xF1 is used as a frame termination and as a EndOfTransmit message. This value cannot be present in the rest of the fr
    2 KB (319 words) - 14:54, 7 September 2017
  • 2-2f. Scheduler - Event Handler (practice)
    * Use AlphaWeb to upload a wav-file as alarm message 3, dir no 8193 (wav file is found on the memory stick)
    570 bytes (82 words) - 12:43, 1 October 2013
  • GLOBAL SEARCH
    |align=center|2||UINT(0..n)||colspan="3"|Search string as stored in AlphaCom<br />
    605 bytes (82 words) - 14:26, 6 July 2022
  • FBSAR - PA interface
    ...from the [[Audio Program|audio program inputs]] out via the FBSAR, as well as [[Voice Alarm Messages|alarm messages]] from the [[ASVP]] board. ...rt''' to create an event with the following parameters (here RCO 1 is used as an example):
    3 KB (428 words) - 11:01, 1 June 2022
  • Grandstream HT802
    *Outbound Proxy: Same as the Primary SIP Server *User ID: The Directory Number as configured in the ICX or IC-EDGE Controller
    3 KB (501 words) - 12:22, 23 February 2023
  • ENA2200 Amplifier
    {{AS}}[[File:ENA2200.png|thumb|alt=ENA2200.|500px|The ENA2200 amplifier]] ...y on the [[ENA User Interface|amplifier display]] and fault relay, as well as reported to the AlphaCom server which can raise an event or forward the rep
    3 KB (500 words) - 15:29, 29 February 2024
  • ENA2400-DC Amplifier
    {{AS}}[[File:ENA2400-DC.jpg|thumb|alt=ENA2400-DC.|500px|ENA2400-DC amplifier]] ...y on the [[ENA User Interface|amplifier display]] and fault relay, as well as reported to the AlphaCom server which can raise an event or forward the rep
    3 KB (494 words) - 09:52, 16 August 2022
  • Modbus TCP
    ...ecting over '''TCP port 502'''. It does not require a checksum calculation as lower layers already provide checksum protection. {{Note|'''Modbus TCP''' is not the same as Modbus over TCP/IP, which includes a checksum in the payload.}}
    8 KB (1,365 words) - 11:11, 4 December 2023
  • VSF-Fortitude6 8.0 Release Notes
    ...ed the device to reboot without notifying the user. This is now fixed, and as in earlier software releases, the user is redirected to a new page with an === MTN-4181 Report DAK and Report station call events as Digital Input in ONVIF options are now working for Hanwha VMS===
    3 KB (487 words) - 14:25, 6 February 2024
  • Audio Interface - IP devices
    The audio to and from IP devices is transmitted as RTP over UDP. Audio encoding is G.722 or G.711 A- or u-law. The IP device i ICX-AlphaCom uses UDP ports from the same pool as AlphaNet and SIP (61000 - 62000) for audio to and from IP device.
    5 KB (776 words) - 15:44, 25 October 2023
  • HD audio for background music distribution
    ...way communication. The "HD Audio" option is intended for Turbine kits used as PA Interfaces''.}} === TKIE-2 as Audio Source===
    7 KB (1,160 words) - 15:10, 27 October 2023
  • ESPA 4.4.4
    ...col controlling wireless pagers. It uses ISO 1745, point-to-point on RS232 as data link layer. The AlphaCom can use this in two ways: Same message, written as hex-values:
    1 KB (219 words) - 10:36, 20 June 2018
  • Syslog (AlphaCom)
    ...the actual [http://en.wikipedia.org/wiki/Syslog syslog] protocol, as well as the application or library sending syslog messages.
    2 KB (295 words) - 16:40, 28 June 2022
  • VS-Operator Server not starting
    ...ment Studio'''’ (freely available from Microsoft) to set the selected user as database owner, this is either: ...ection of the dialog, select '''db_owner''' and leave all other selections as they were
    2 KB (354 words) - 10:39, 29 June 2023
  • ECP-AA1 Connections
    ...t to the ECP-AA1. Its purpose is so that an emergency call is made as soon as the emergency brake handle is operated.
    1 KB (223 words) - 12:10, 23 June 2023
  • AlphaCom Recording Interface
    ...it is possible to enable recording for as many specific intercom stations as the number of licenses purchased. To record both sides of a conversation, o ...ations are not able to call each other, only as many licenses are required as there are master stations. <br />
    10 KB (1,491 words) - 16:02, 9 October 2023
  • AUDIO M FEED STOP
    |align=center|-||(Reference field)||colspan="3"|As provided in [[AUDIO_M_PATH_SETUP]]
    663 bytes (87 words) - 15:39, 3 October 2019
  • DIP
    ...xchanges. It is used for all data-communication with the IP stations, such as call control, LED settings and display text to the station, and key presses
    573 bytes (91 words) - 14:41, 7 September 2017
  • IPVRS-1
    The station is typically used as a communication, information or emergency point and connects directly to th This station is fully supported as from AlphaCom version 11.2.3.11
    2 KB (244 words) - 12:27, 29 January 2024
  • IP Flush Master -V2 Board Connectors
    ...0-pin ZIF connector for LCD display. Separate display panels are available as a kit of 5 units (order no. 1008099000). ...on Type" is set as '''Master station''' in AlphaPro, the inputs are mapped as DAK '''11, 12''' and '''13'''.''
    4 KB (594 words) - 15:13, 23 June 2023
  • VSF-Fortitude8 8.0 Release Notes
    ...ed the device to reboot without notifying the user. This is now fixed, and as in earlier software releases, the user is redirected to a new page with an === MTN-4181 Report DAK and Report station call events as Digital Input in ONVIF options are now working for Hanwha VMS===
    4 KB (551 words) - 14:17, 6 February 2024
  • IP Station Configuration - Pulse mode
    ...such systems please use any other Vingtor-Stentofon IP station type, such as TCIS-x, or TKIS-2. }}
    2 KB (312 words) - 09:23, 11 July 2019
  • VSF-Fortitude8 7.5 Release Notes
    === MTN-4047 It’s now possible to use W as the second letter in a password=== The issue was that with W as second letter in a password you could not get access to the video configura
    4 KB (537 words) - 10:28, 8 September 2023
  • 2-2c. CCTV with data (1) - Event Handler (solution)
    * ''The AlphaCom should be set as a "TCP/IP Server", and TCP port number 4005 should be used for the communic In '''Exchange & System''' > '''Serial Ports''', set the EDIO 1 port as TCP/IP Server, using port 4005:
    3 KB (463 words) - 10:07, 30 June 2022
  • AMS - Asset Management System guideline
    ...ves as a guideline to partners, related to the ICX license process as well as the product lifecycle management of ICX systems. ...stem (IC AMS) provides a portal for product life cycle management, as well as a tool for partners/installers for license activation and license installat
    8 KB (1,359 words) - 10:03, 25 May 2023
  • Invalid key
    * Some tables also has an extra IDX file that needs to be copied as well:
    856 bytes (134 words) - 10:57, 24 October 2023
  • PACOM Unison - ICX-AlphaCom integration
    Compatibility between ICX-AlphaCom and PACOM Unison is as from ICX-AlphaCom software version 1.1.3.0. ...ports. The documentation for PACOM Unison suggests to use ACDP port 4, but as there is no difference in operation of the ACDP-ports another port can be s
    7 KB (1,035 words) - 15:42, 1 December 2022
  • Private Ringing, Customized ringing tone
    Customized ringing tones works for IP stations as well as for analog stations. ...d for "Ringing group" can be associated with a wav file in the same manner as for stations.
    3 KB (415 words) - 10:38, 7 November 2022
  • Access It! by acre security – ICX-AlphaCom integration
    **1.0.3.0 - do not configure CRMV as part of a Ringing Group **13.1.3.2 - do not configure CRMV as part of a Ringing Group
    2 KB (280 words) - 10:00, 12 May 2023
  • SIP registrar node - configuration
    ...SIP Registrar node is no longer needed. Please see the article [[SIP phone as station]]''.}} Each SIP station is defined as a [[Call remote station feature|global number]] and can be called directly
    4 KB (569 words) - 09:35, 16 April 2019
  • Recorder 2.0 problem with audio export
    **By default the NVR2 Service logs in as 'Local System account' but this may have been changed by the installer; mak ...action; To give the proper permissions to the user, open an elevated (run as administrator) command line and enter the following command (“DOMAIN\user
    2 KB (302 words) - 08:46, 22 July 2022
  • IMT - Review Results
    The ICX-AlphaCom or Pulse directory reports can be saved as either text or csv files, while the other reports are saved in text format.
    668 bytes (98 words) - 15:03, 16 August 2022
  • Time synchronization
    The [[AlphaCom clock|realtime clock]] of the ICX-AlphaCom (as with any other computer device) is not accurate, and might drift over time. ==ICX-AlphaCom as NTP Server==
    4 KB (726 words) - 14:07, 3 June 2022
  • Substitute date & time in display (MDF)
    ...and time. The changes will take effect in regular display stations as well as CRM-III and -IV type of stations. In the example below the date and time is
    2 KB (331 words) - 08:25, 8 September 2017
  • Acoustic echo
    ...loss''': The amount of signal loss to the original signal that is returned as echo. High values mean the echo is very weak, while low or negative values [[File:EchoTolerance.png|thumb|left|400px|Talker echo tolerance as function of delay]]
    4 KB (670 words) - 15:12, 27 October 2023
  • SNMP in AlphaCom XE
    Zenitel Norway AS has assigned a Private Enterprise Number [http://oid-info.com/get/1.3.6.1.4 The Zenitel Norway AS enterprise number is labeled '''enterprises.stentofon'''<br />
    4 KB (624 words) - 06:43, 13 September 2022
  • ENA Amplifier - Monitoring
    ...and ground faults. A loud change must be minimum 15% before it is reported as an error. The SLM can be individually turned on or off for each channel in ..._Mounting_and_Installation#Control_Inputs|connect two resistors]] as close as possible to the external switch/relay. The monitoring must be enabled per i
    5 KB (823 words) - 15:02, 3 May 2021
  • AMC-IP software upgrade (Black AMC-IP board)
    ...3.4.apkg. This file contains the AMC-IP software version 12.5.3.4, as well as security updates.
    2 KB (304 words) - 15:23, 4 May 2023
  • IP Station Supervision
    ...nterval. Thus a broken socket is discovered within 10 seconds and reported as line error from AlphaCom. The keep-alive test is done on the operative syst ...tation reply with a "PONG". If one PONG is missing the station is reported as line fault. The purpose of this test is to verify that the application in t
    3 KB (434 words) - 15:26, 5 July 2022
  • CNL IPSecurityCenter - ICX-AlphaCom integration
    ...er™ connects and manages disparate building and security technologies such as video surveillance, life critical systems, radar, analytics, HVAC, PIDS, GP *Pulls in and displays rich alarm details such as time, date, location, alarm type
    4 KB (615 words) - 10:19, 15 August 2022
  • Redboot
    ...ootloader used on the AMC-IP system. The bootloader does a bit of the same as the BIOS on PC. The system enters the bootloader at reset. If not interrupt
    739 bytes (115 words) - 08:08, 8 September 2017
  • IP-LCM
    * As from HW version 1.1 there is also 0dB Line In available. When used in AlphaCom mode, this device is fully supported as from AlphaCom version 11.2.3.7
    3 KB (405 words) - 14:47, 22 April 2024
  • ABSD Billing
    ...local AMCD using Stentofon Simple Link Layer. The ABSD software is defined as device number 198, and connects to local AMCD on TCP port 127.0.0.1/40002.
    662 bytes (98 words) - 09:55, 2 September 2010
  • Rtpdaemon
    * Rtpdaemon is implemented as a single-threaded program.
    612 bytes (89 words) - 08:09, 8 September 2017
  • ENA Amplifier - Report faults to Display Station
    ...} [[File:ENA Error to display.png|thumb|800px|right|Amplifier faults, such as Speaker Line errors, can be reported to display stations]] ...ude the amplifiers in an [[UDP group|UDP Group]]. Here UDP Group 3 is used as an example.
    2 KB (294 words) - 14:16, 31 May 2022
  • Moving from AlphaView to VS-Operator
    ...ers who already have AlphaView installed the process has been made as easy as possible.
    2 KB (295 words) - 11:01, 29 June 2023
  • 2-3c. SIP trunk with MP114 (solution)
    Set the parameters as follows: [[File:2-3c solution5.PNG|thumb|left|500px|Digit "0" as prefix to access the line]]
    2 KB (306 words) - 10:07, 30 June 2022
  • DISCON STATUS BC
    |align=center|2||[[UINT2]]||colspan="3"|Connection reference as given in [[CONN_STATUS_BC]]
    787 bytes (100 words) - 15:54, 3 October 2019
  • Grandstream Wave Lite mobile app
    ...devices. The application is free. It enables you to use your mobile device as an intercom station in the IC-EDGE system. * Modify '''Number''' and '''Name''' as required
    5 KB (819 words) - 11:22, 20 February 2023
  • AlphaVision - How to get started
    ** Normally one can leave the other parameters as is. Press OK to close the window. ...ed one by one. (Initially only Station 102 will appear in the System Tree, as this is the default operator station. Double click on station 102 to open t
    4 KB (677 words) - 10:13, 7 June 2022
  • Stored Voice Message
    The {{AlphaWiki|AMCD}} application uses this reference as the starting point when a feature needs playback of a message. The same ref ...or different functions, thereby blocking per function is achieved, as well as limit number of different messages for a function.
    5 KB (714 words) - 15:05, 5 February 2018
  • GET NEXT MAIL
    ...rrent queue entry.<br />If the parameter is left out, the function will be as for [[GET_FIRST_MAIL]].
    742 bytes (105 words) - 15:57, 3 October 2019
  • Configuration of the ZMK-1 kit
    ...t and Dark theme are self explanatory. The Light Compact theme is the same as Light theme with the difference being that the buttons are smaller and the Under Logo you can upload a SVG file to be displayed as a logo in the address book. The delete button deletes the file.
    4 KB (601 words) - 12:04, 7 December 2023
  • Configuration guide for School IP Intercom (Pulse)
    ...''' The off-line display menu is not available for the School IP Intercom, as the navigation buttons are not present on this station. ...ect Access Key Settings'''. Enter call destinations and optional functions as required.
    2 KB (312 words) - 17:25, 31 January 2023
  • Logging - IP Stations
    * Note that the station will do a '''partial reboot''' as soon as the '''Enable''' button is pressed, and will be out of service for approx. ...s old data, it is recommended not to keep the logging permanently enabled, as it will consume memory space and wear out the flash memory }}
    6 KB (865 words) - 09:32, 27 February 2024
  • Configuration guide for School IP Intercom (Edge)
    ...''' The off-line display menu is not available for the School IP Intercom, as the navigation buttons are not present on this station. ...ect Access Key Settings'''. Enter call destinations and optional functions as required.
    2 KB (309 words) - 17:24, 31 January 2023
  • GET PREV MAIL
    ...rrent queue entry.<br />If the parameter is left out, the function will be as for [[GET_LAST_MAIL]].
    744 bytes (104 words) - 15:57, 3 October 2019
  • Vandal Resistant intercom - VR3G-1P
    ...the Piezo button on this unit, it is not possible to hold down the button as per a regular Turbine device. Therefore, follow the directions for Factory This station is fully supported as from AlphaCom version 11.2.3.7
    2 KB (274 words) - 09:35, 7 March 2024
  • MultiModule
    ...integration of all features. In some documents multi-module is referred to as InterCardCage, ICC. ...he line capacity. A MultiModule system being a part of an AlphaNet is seen as a single node.
    6 KB (968 words) - 13:52, 5 July 2022
  • Configuration guide for School IP Intercom (SIP)
    ...''' The off-line display menu is not available for the School IP Intercom, as the navigation buttons are not present on this station. ...ect Access Key Settings'''. Enter call destinations and optional functions as required.
    2 KB (313 words) - 17:25, 31 January 2023
  • 2-3d. SIP trunk with GSM Gateway (solution)
    Set the parameters as follows: [[File:2-3c solution5.PNG|thumb|left|500px|Digit "0" as prefix to access the line]]
    2 KB (307 words) - 10:07, 30 June 2022
  • TFIE Keyboard Settings
    ...rd Brightness''': Sets the brightness of the light in the buttons, as well as the Power LED, Fault LED and Call LED.
    2 KB (334 words) - 11:58, 10 January 2023
  • Pelco Digital Sentry - ICX-AlphaCom integration
    ...phaCom can send matching strings out from one its EDO-ports on events such as Call Request and Call. Digital Sentry can be set up to record and display t ...rial Ports''' tab select the '''General''' tab, and set up the serial port as 'Card Reader' and select an appropriate End Of Line Character (for instance
    4 KB (613 words) - 08:55, 16 August 2022
  • RCO - Set Remote Control Output
    ...ed for operating relays on devices supporting Remote Control Outputs, such as the [[MRBD]] board, the [[FBSAR]] board or the relay in the IP station.
    632 bytes (90 words) - 16:17, 4 October 2019
  • TA-10
    ...urbine Extended Board (Connector J2), and the other end to the TA-10 board as indicated in the drawing below * The two relays must be mapped in the RCO table as pin 9 and pin 10
    2 KB (277 words) - 14:41, 27 June 2023
  • CathexisVision - ICX-AlphaCom integration
    ...ation is recorded. This can be search for specific events based on filters as required. The above licenses can be purchased as a bundle license, CSTF-3000.
    2 KB (290 words) - 08:17, 29 September 2022
  • IP Multicast
    ...ial MAC address, where the lower 23 bits of the Multicast Address are used as the lower 23 bit of the MAC address. Dumb ethernet switches usually handle multicasts as broadcasts. So multicasted audio may use up some of the transmission capaci
    2 KB (389 words) - 11:08, 8 September 2017
  • Remote call button - 1007060120
    ...of button which can be connected to the 1007061000 and 1007063000 stations as an additional call button
    681 bytes (83 words) - 10:49, 1 November 2016
  • ONVIF Integration for ASL PAVA
    By using a Zenitel VoIP kit as an ONVIF Interface, it is possible to integrate an ONVIF compliant VMS syst ...ed zones as output. And of course one of the inputs can also be configured as a cancel input to cancel playing a message.
    6 KB (977 words) - 12:21, 17 November 2023
  • TCIV - No video after upgrading to v. 4.11
    ...red after upgrade to 4.11.x.x. Go into video settings and select HTTP MJPG as the second stream. Define port to 8090 and uncheck authentication. * Set TFTP-server IP to be your PC IP (same network interface as in VS-IMT (!)).
    2 KB (357 words) - 14:18, 25 April 2019
  • EXT FEATURE BC
    ...50]]) is dialed on a station. The station then cancels immediately. Used as a message to an external device (e.g. a PC or a GPU).
    770 bytes (106 words) - 07:12, 30 March 2022
  • IP-ARIO Connections
    | AUX || 10/100 Mbps RJ45 port for auxiliary equipment such as PC and IP camera * '''AUX''' port is for connecting to auxiliary equipment such as a PC.
    2 KB (265 words) - 16:05, 13 February 2019
  • UTStarcom F1000G WiFi phone
    The SIP phone must be defined as a [[SIP phone as station|SIP User]] in the '''Users & Stations''' menu in AlphaPro. The SIP
    2 KB (349 words) - 10:12, 16 August 2022
  • School IP Intercom - 1402001000
    ...)|off-line display menu]] is ''not available'' for the School IP Intercom, as the navigation buttons are not present on this station. The station must be This station is fully supported as form AlphaCom version 10.50
    2 KB (322 words) - 09:48, 16 August 2022
  • Voice Recording Board (VRB3)
    ...analog stations connected to AlphaCom [[ASLT]] ports and to present these as transformer coupled, 600 Ohm, nom. 0dBm outputs for recording by (typically ...k connector 13mm pins but which are free at the distant end for connection as required.
    2 KB (267 words) - 14:07, 14 June 2018

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://wiki.zenitel.com/wiki/Special:Search"