Search results
Create the page "ICX System" on this wiki! See also the search results found.
Page title matches
- ...[[:category:ICX-AlphaCom Platform|ICX-AlphaCom system]] or the AlphaCom XE system. The integration is using the [[EDO - External Data Output|EDO port]]. From the [[Event Handler]] of the ICX-AlphaCom one can generate ASCII strings to be sent out on the EDO port, whi926 bytes (134 words) - 15:42, 15 August 2022
Page text matches
- ...[[:category:ICX-AlphaCom Platform|ICX-AlphaCom system]] or the AlphaCom XE system. The integration is using the [[EDO - External Data Output|EDO port]]. From the [[Event Handler]] of the ICX-AlphaCom one can generate ASCII strings to be sent out on the EDO port, whi926 bytes (134 words) - 15:42, 15 August 2022
- Depending on server type (AlphaCom XE or ICX-AlphaCom) and the AlphaPro version, AlphaPro is using different TCP ports w == ICX-AlphaCom server ==1 KB (210 words) - 10:38, 9 November 2023
- '''Problem''': In an ICX-500 or ICX-Core system, when using the '''Reset''' button or the '''Set Node''' button from AlphaP ...ge & System''' > '''System''', make sure that the "Node Type" is set to '''ICX''', and not to "AlphaCom" or "AlphaCom XE".1 KB (153 words) - 10:59, 24 October 2023
- DNA Fusion can be integrated with the ICX system or the AlphaCom system. ===ICX===1 KB (173 words) - 10:02, 12 May 2023
- This article shows possible solutions for redundancy with the ICX-AlphaCom server. ==ICX-AlphaCom redundancy==2 KB (333 words) - 15:22, 28 June 2022
- ...tween the ICX system or AlphaCom system and the Bosch Building Integration System (BIS) is via OPC. ===ICX===2 KB (309 words) - 10:13, 15 August 2022
- ...management system which also provides an interface to the ICX or AlphaCom system. The interface is based on the ACDP Simple Link Layer Protocol. ...ons, RCI's and RCO's is shown. It is also possible to send commands to the ICX/AlphaCom making it possible to set up calls, operate the M-button, for inst2 KB (240 words) - 15:41, 15 August 2022
- ...ision Control Center can be integrated with the ICX system or the AlphaCom system. The integration is done via OPC. ===ICX===2 KB (259 words) - 16:03, 15 August 2022
- ...ngs Integrator (EBI) can be integrated with the ICX system or the AlphaCom system. The integration is via [[OPC Server|OPC]]. ===ICX===2 KB (246 words) - 15:59, 15 August 2022
- {{AI}}Each of the two ethernet ports in the [[ICX-500 Gateway|ICX-500]] or in the [[:Category:AlphaCom Servers|AlphaCom Servers]] has an uniq ...ormation|System Monitoring > Node information]] and in [[ICX_Web#Licensing|System Configuration > Licensing]].990 bytes (153 words) - 09:59, 11 May 2022
- {{I}}This article describes how to install the ICX-AlphaCom Core software package. ...tware is also available for installation on industry standard PC hardware. ICX-AlphaCom Core can be installed either on a physical machine or virtual mach4 KB (596 words) - 10:20, 6 March 2024
- ...t the functions of Vipedia. One of those functions is the scheduler of the ICX-AlphaCom. ...he TKIE-2 kit]] article we can play scheduled messages to the Vipedia PAVA system.1 KB (187 words) - 12:11, 17 November 2023
- Pressing the call button during conversation is by default ignored by the system. Available in ICX-AlphaCom and in AlphaCom XE from firmware v. 13.641 bytes (89 words) - 10:29, 24 October 2023
- ...iti from Inner Range can be integrated with the ICX system or the AlphaCom system. The interface is based on a special integration module which is available ===ICX===3 KB (388 words) - 16:04, 15 August 2022
- The ST2000 Security Management System from Habtech integrates with ICX-AlphaCom. This integration uses the VS-SDK for AlphaCom connecting with the ...acing a call, ending a call to be done from the ST2000 Security Management System.2 KB (328 words) - 14:18, 12 February 2024
- This article describes how to install ICX-Core in a VirtualBox environment. * Operating System:5 KB (759 words) - 10:41, 24 October 2023
- Previous Release - [[ICX 1.2.3.X - Release Notes]] ...s release notes describe new features, improvements and issues fixed after ICX 1.2.3.x.3 KB (480 words) - 13:56, 21 February 2024
- ...y and Information Management (CSIM) software the ICX-AlphaCom and AlphaCom system. ...nd operation of the Vidsys CSIM product. Only points which are specific to ICX-AlphaCom and AlphaCom and to its connected intercom stations are described.2 KB (223 words) - 09:27, 8 September 2020
- ==ICX-AlphaCom platform== ...X-AlphaCom Platform: [https://alpha.zenitel.com/downloads/ICX-AlphaCom.mp4 ICX-AlphaCom.mp4]1 KB (189 words) - 14:21, 26 February 2020
- !style="background:#ffdead;" |ICX-AlphaCom 1.2.3.6 |colspan="5"|Simulates Small Reset sent from ICX-AlphaCom web interface.642 bytes (80 words) - 13:31, 30 June 2022
- ...that actually becomes available depends on what [[Licenses for ICX-500 and ICX-AlphaCom Core|Audio Messaging license]] is installed. * In the web interface of the ICX-AlphaCom go to '''System Configuration''' > '''Messaging'''2 KB (228 words) - 15:12, 3 June 2022
- ...e following paragraphs give a general description of the capability of the system, for more details please contact ela-soft directly. ==ICX/AlphaCom Setup==2 KB (351 words) - 15:39, 15 August 2022
- ...s Latitude Network Video Management System (NVMS) is interfaced to the ICX system or AlphaCom based on the STENTOFON .NET SDK. ===ICX===4 KB (542 words) - 15:43, 15 August 2022
- The Facility value is a way of determining which process of the ICX-AlphaCom created the message. Since the Syslog protocol was originally writ * Local1: [[AlphaCom system log|System log]]2 KB (295 words) - 16:40, 28 June 2022
- ...he VS-SDK, where all event data is sent through to CathexisVision VMS from ICX-AlpaCom. * On initialization the ICX-AlphaCom events received by CathexisVision include site hardware informatio2 KB (290 words) - 08:17, 29 September 2022
- ...om require Ubuntu 22.04 LTS<br>Upgrading Ubuntu will require upgrading the ICX-AlphaCom Core installation. ==ICX-AlphaCom Core 1.2.3.8 and below==5 KB (821 words) - 01:36, 22 February 2024
- By default station errors are reported more or less instantly when the ICX-AlphaCom server looses communication with an IP Station, or if there is an Go to the [[Exchange_%26_System_(AlphaPro)#Faults|Exchange & System > RCI > Faults window]], select '''Fault Line''' > Change, and delete the [3 KB (412 words) - 14:02, 31 May 2022
- This is done using the [[Event Handler]]. Go to Exchange & System from the top menu in [[AlphaPro]]: [[File:AlphaPro Exchange and System icon.png|thumb|left|500px]]982 bytes (148 words) - 13:48, 31 May 2022
- ICX-AlphaCom (and AlphaCom XE) can be interfaced to a Tetra radio system in two ways: ...tercoms stations to listen to (and talk back to) a talk group in the Tetra system.2 KB (307 words) - 09:51, 13 February 2024
- ...in to the [[Edge Controller]], and navigate to '''Edge Controller''' > '''System Configuration''' > '''Call and Audio'''. The ANC feature can be disabled (o ...eCancellingEdge.png|thumb|left|700px|ANC enabling/disabling in the IC-Edge system (screenshot from firmware 7 or later)]]3 KB (380 words) - 15:31, 25 October 2023
- ...[[Exchange_%26_System_%28AlphaPro%29#Calls_and_Options|Exchange & System > System > Calls and Options]]: 'Urgent Feature Reminder'. [[File:CRM 20.PNG|thumb|left|500px|Exchange & System → System → Calls and Options]]943 bytes (132 words) - 14:12, 3 June 2022
- ...e "PTT-mode" when the IP Speaker is used in an ICX-AlphaCom or AlphaCom XE system. We assume that the IP Speaker is already configured and registered to the ICX-AlphaCom server.990 bytes (151 words) - 16:02, 2 June 2022
- ...d Sipelia which provides an interface from its Security Center Software to ICX-AlphaCom or AlphaCom XE and intercom stations in SIP-mode. ==ICX System ==2 KB (302 words) - 15:07, 26 June 2023
- === ICX/AlphaCom system === === Edge system ===3 KB (438 words) - 09:15, 5 July 2022
- ...using the [[ESPA 4.4.4|ESPA 4.4.4 protocol]], and activate features in the ICX/AlphaCom. The following types of systems have been tested: * When used with the ICX System, the following license is required in the ICX in order to enable the ESPA444 protocol: 1002602400 - ILI-IF Interface enab3 KB (456 words) - 11:10, 19 November 2019
- ...ctuations in the frequency oscillating the quartz crystal on the AMC-IP or ICX-500 board. The realtime clock can be synchronized in several ways. The ICX-AlphaCom can synchronize its real time clock with Network Time Protocol (NT4 KB (726 words) - 14:07, 3 June 2022
- This is done using the [[Event Handler]]. Select '''Exchange & System''' from the top menu in [[AlphaPro]]: [[File:AlphaPro Exchange and System icon.png|thumb|left|500px]]1 KB (166 words) - 11:12, 8 July 2022
- ...r security operators and administrators to set up access control and alarm system monitoring and control at a site. This comprises * Alarm System Monitoring7 KB (1,035 words) - 15:42, 1 December 2022
- A wav file with the wanted ringing tone must be uploaded to the ICX-AlphaCom or AlphaCom XE via the web interface. ===ICX-AlphaCom===3 KB (415 words) - 10:38, 7 November 2022
- ...Prysm. The AppVision can be integrated with the ICX system or the AlphaCom system. The integration is via OPC. ===ICX===3 KB (467 words) - 08:59, 16 August 2022
- | Display station and system information ...ion''': || Service code: Dial 789 on a display station to view station and system information. Press M-key to step to new information:1 KB (175 words) - 09:29, 11 May 2022
- IPSecurityCenter™ aggregates intelligence from the ICX system or the AlphaCom audio server, allowing organizations to have a complete vie *Allows operators to make calls from within IPSecurityCenter using ICX or AlphaCom4 KB (615 words) - 10:19, 15 August 2022
- |keywords=Zenitel,Vingtor-Stentofon,AlphaWikiZenitelWiki, ICX, Alphacom, IC-Edge, Pulse and SIP ...el AlphaWiki contains up to date technical information about the platforms ICX, AlphaCom, IC-Edge, Pulse and SIP Intercom.7 KB (815 words) - 11:50, 29 February 2024
- When devices are used in an ICX-AlphaCom System, there are additional audio settings available when entering the '''Advance440 bytes (60 words) - 10:54, 16 December 2022
- ...hnson Controls P2000 can be integrated with the ICX system or the AlphaCom system. The integration is using the MPC Data Protocol. ...ory messages and alarms. The P2000 system interfaces with the ICX/AlphaCom system to establish audio communication links between any two or more defined inte5 KB (714 words) - 16:05, 15 August 2022
- ...l Sentry can be integrated with the ICX-AlphaCom system or the AlphaCom XE system. The integration is using the EDO port. Digital Sentry has an ASCII string based alarm input option. ICX or AlphaCom can send matching strings out from one its EDO-ports on events4 KB (613 words) - 08:55, 16 August 2022
- ...stem. The integration is based on EDO and event handler programming in the ICX/AlphaCom. When used with the ICX System, the following license is required in the ICX in order to enable the EDO port: 1002602400 - ILI-IF Interface enabling4 KB (552 words) - 13:59, 19 November 2019
- {{I}}This article describes how to install ICX-AlphaCom Core in a Hyper-V environment. * Operating System:7 KB (1,099 words) - 10:22, 17 May 2023
- A '''SuperUser''' is a user with access to all features in the system. A SuperUser is assigned to [[Class of service]] 16. By default there is on ...sages from the AlphaCom. The following error messages are generated by the system:1 KB (147 words) - 14:06, 3 June 2022
- The interface between the ICX system or the AlphaCom system and AC2000 from CEM Systems (Tyco) is based on a special integration module ...vides seamless bi-directional communication between CEM Systems AC2000 and ICX/AlphaCom intercom servers and workstations, as well as their respective int6 KB (902 words) - 10:15, 15 August 2022
- [[File:edge-icon.jpg|70px|link=Category:IC-EDGE System]] [[File:icx_icon.png|70px|link=Category:ICX-AlphaCom Platform]]496 bytes (79 words) - 15:29, 26 October 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (203 words) - 14:32, 12 February 2024
- ===ICX=== ...Product Key which covers all stations connected to all ICX's in a network. ICX licenses can be stacked, i.e. 1x 1002602306 + 2x 1002602309 gives 1088 API2 KB (310 words) - 09:01, 16 August 2022
- ...to the ICX license process as well as the product lifecycle management of ICX systems. ==IC Asset Management System==8 KB (1,359 words) - 10:03, 25 May 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (207 words) - 13:37, 29 January 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]1 KB (170 words) - 15:15, 23 June 2023
- ...in to the [[Edge Controller]], and navigate to '''Edge Controller''' > '''System Configuration''' > '''Call and Audio''', and enable/disable "'''AGC'''" per [[File:AGC Edge.png|thumb|left|700px|Enabling AGC in an IC-Edge system]]3 KB (439 words) - 15:57, 25 October 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (209 words) - 13:37, 29 January 2024
- ...describes how to upgrade the software of the [[ICX-500 Gateway|ICX-500 and ICX-510 Gateways]]. {{Note|ICX-500 with hardware revision .0102 requires minimum FW 1.2.3.3}}6 KB (1,041 words) - 11:57, 21 February 2024
- The built-in [[Scheduler (Event Type)|Scheduler]] function in ICX-AlphaCom can be used activate [[Transfer_Features#Call_Forwarding|Call Forw As the internal clock of the ICX-AlphaCom server might drift over time, it is recommended that the server is4 KB (571 words) - 14:59, 11 August 2022
- Go to Exhcange&System from the top menu in [[AlphaPro]]: [[File:AlphaPro Exchange and System icon.png|thumb|left|500px]]1 KB (242 words) - 14:03, 31 May 2022
- [[Image:ICX Tel Service2.png|right|900px]] This article describes how the ICX-AlphaCom can access the public telephony network by connecting to a SIP Ser7 KB (1,036 words) - 10:22, 14 March 2023
- ICX-AlphaCom and AlphaCom interfaces to the Total Recall range of voice recorde The recorder will now accept all SIP recordings from the ICX-AlphaCom or AlphaCom server. There is no further configuration required.<b1 KB (176 words) - 03:50, 4 May 2023
- ===ICX=== ICX requires the presence of the appropriate API/OPC license.5 KB (844 words) - 01:18, 11 October 2022
- ...ler (Event Type)|Scheduler]] function in [[:category:ICX-AlphaCom Platform|ICX-AlphaCom]] can be used to dispatch prerecorded messages or time signals at As the internal clock of the ICX-AlphaCom server might drift over time, it is recommended that the server is5 KB (712 words) - 20:36, 22 July 2022
- ...ro, [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Exchange & System > System > Call Forwarding Ring Count]].<br> [[Category: ICX-AlphaCom features]]1 KB (146 words) - 15:30, 20 May 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (233 words) - 15:09, 30 April 2024
- # Planning your system ...installation by collecting configuration data you would need to setup your system.15 KB (2,159 words) - 15:57, 16 August 2022
- === ICX/AlphaCom system === === IC-Edge System ===3 KB (544 words) - 14:15, 26 May 2023
- ...system can be configured to operate as a Page/Party line Conference 1 line system. <br> ...an be included in AlphaCom XE and up to 32 participants can be included in ICX-500.4 KB (635 words) - 01:59, 2 March 2023
- * [[Configuration guide for STENTOFON IP-DECT|IP Dect System 6000]] * [[Configuration guide for Ascom IP-DECT|Ascom IP Dect System]]2 KB (278 words) - 12:21, 24 February 2023
- ...onfiguration required to connect Vipedia PAVA system with the ICX-AlphaCom system using a [[TKIE-2]] kit. ...launched within the ICX-AlphaCom can include zones(s) in the Vipedia PAVA system7 KB (1,287 words) - 12:18, 17 November 2023
- * Select '''Advanced ICX-AlphaCom''' -> '''Keyboard Settings''' (ICX-AlphaCom mode) * In '''System Main''' > '''Main Settings''', set '''Station Mode''' = '''Use SIP''', then2 KB (267 words) - 13:34, 23 November 2020
- ...escribes how you can override the voice-operated duplex (VOX), and set the system in Simplex (Press To Talk) mode. ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event:1 KB (175 words) - 11:37, 8 July 2022
- * ICX-AlphaCom: Any ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events:1 KB (189 words) - 11:32, 8 July 2022
- This can be changed in AlphaPro, Exchange & System, System, RCI and Faults tab. This is done in AlphaPro, Exchange & System, System, Calls and Options.1 KB (248 words) - 10:22, 25 May 2022
- ...on into Security Expert’s integrated access control and intruder detection system. ...rmation presented in this article describes how to prepare an ICX-AlphaCom system to communicate with Security Expert and how to program Security Expert to i7 KB (1,008 words) - 15:14, 16 March 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (222 words) - 13:49, 29 January 2024
- The ICX-AlphaCom or Pulse directory reports can be saved as either text or csv file Next step: [[IMT - Additional intercom system configuration]]668 bytes (98 words) - 15:03, 16 August 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (291 words) - 15:00, 5 February 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (291 words) - 15:01, 5 February 2024
- The integration between ICX or AlphaCom and the Pro-Watch from Honeywell is via the MPC protocol. ...rial and IP data connections. AlphaCom also support both methods, while in ICX one must use an Ethernet to Serial Converter if serial data is needed.8 KB (1,324 words) - 16:01, 15 August 2022
- |'''Event type''': || 27 - System Status [[Redundant Servers - ICX-AlphaCom|Redundant Servers (IP-HA)]]:2 KB (263 words) - 17:28, 1 March 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (229 words) - 13:47, 29 January 2024
- ...device (subevent) 65 can be used to write the wanted value to the nvram at system startup: [[Category: ICX-AlphaCom features]]2 KB (279 words) - 12:16, 23 February 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (301 words) - 14:25, 7 February 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (302 words) - 15:01, 5 February 2024
- ...to [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Exchange & System -> System -> Calls and Options]] and set Call Forwarding – Ringing Count to 0. ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events:2 KB (225 words) - 11:36, 8 July 2022
- This article describes how to configure the ICX-AlphaCom in such a way that a call button from a substation must be pressed ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events:1 KB (218 words) - 11:21, 8 July 2022
- ...text strings via a TCP/IP connection to the Milestone XProtect Management System.<br> *ICX-AlphaCom Setup6 KB (885 words) - 08:44, 16 August 2022
- ...m > Net Routing''' use the ''Insert'' button to create a route between the ICX-AlphaCom and the first Gateway. Add the other gateway as the Alternative Ro ...fining the maximum number of VoIP channels available for the SIP Trunk the ICX will automatically use the Alternative Route if all VoIP channels are in us2 KB (381 words) - 12:05, 24 February 2023
- [[File:ICX SIP Devices.PNG|thumb|right|600px|ICX-AlphaCom as SIP Server]] ...IP server. This article describes how to '''create a SIP account''' in the ICX-AlphaCom to which SIP devices can register.8 KB (1,130 words) - 23:35, 16 March 2023
- The [[Redundant Servers - ICX-AlphaCom|IP-HA system]] reports changes of the server state to the [[Event Handler]]. ...nfigure the Event Handler in order to report current server state to the [[System log]].3 KB (384 words) - 16:44, 28 June 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (260 words) - 17:20, 24 November 2023
- [[File:NPort ICX Block.PNG|600px|right|thumb|Serial communication using Moxa NPort converter In case there is a need for serial communication between the ICX-500 and a remote application, an external Ethernet to Serial Converter is r4 KB (615 words) - 16:47, 11 October 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (312 words) - 14:00, 29 January 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (219 words) - 12:36, 28 November 2023
- Next Release - [[ICX 1.1.3.X - Release Notes]] ...software 1.0.3.x with incremental bug fix releases. The release notes for ICX 1.0 describe new features, improvements and issues fixed after the initial7 KB (977 words) - 05:08, 8 March 2022
- This article describes step by step how to get started with an ICX-AlphaCom system. ...sualized in the image to the right, the article will show how to set up an ICX-500 server, a Desktop station and a Help Point/Door intercom.9 KB (1,490 words) - 12:56, 26 February 2024
- *[[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] *[[Adding station to existing system (Edge)|Edge mode]]2 KB (229 words) - 17:21, 22 January 2024
- ...in to the [[Edge Controller]], and navigate to '''Edge Controller''' > '''System Configuration''' > '''Call and Audio''', and enable "'''AVC'''": [[File:AVC Enable Edge.png|thumb|left|700px|Enabling AVC in an IC-Edge system]]4 KB (605 words) - 13:58, 16 November 2023
- ...is distributed by using the [[Audio Program|Audio Program feature]] of the ICX-AlphaCom. By default this feature is using the HD Voice codec G.722. ...an even better audio quality for background music distribution over the PA system is required, it is possible to use the HD Audio codec PCM L16/48kHz.7 KB (1,160 words) - 15:10, 27 October 2023
- ...talls a configurable interface between Milestone XProtect Smart Client and ICX-AlphaCom or IC-EDGE. ...lemented. The call logging is done using the Milestone XProtect Management system logging facility.2 KB (325 words) - 10:19, 30 June 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (269 words) - 14:37, 29 January 2024
- *[[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] *[[Adding station to existing system (Edge)|Edge mode]]2 KB (274 words) - 09:35, 7 March 2024
- {{AI}} [[File:ENA Amp block.png|thumb|800px|ICX-AlphaCom with ENA Amplifiers]] ...c configuration on how to get started with the ENA Amplifier used with the ICX-AlphaCom server. For a more detailed description of various settings and op4 KB (552 words) - 11:56, 9 February 2022
- ...s feature '''should not exceed approx. 50 stations'''. (Not applicable for ICX-AlphaCom) ...haPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|'''Exchange and System''' -> '''Events''']], press '''Insert''' and create the following event:2 KB (315 words) - 15:22, 11 August 2022
- [[Door opening]] is a standard feature in the ICX-AlphaCom and AlphaCom XE. When an operator is in a conversation with a door ...is done from AlphaPro, [[Exchange_%26_System_%28AlphaPro%29#RCO|Exchange & System > RCO]]. Here the logical RCO is assigned to a physical address. The physi7 KB (1,107 words) - 11:16, 24 October 2023
- This article describes how to program the AlphaCom XE and ICX-AlphaCom Recording Interface when used with 3rd party recorders. ==ICX-AlphaCom Licenses==10 KB (1,491 words) - 16:02, 9 October 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (204 words) - 09:52, 16 August 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (204 words) - 12:51, 23 June 2023
- ...nd_ICX-AlphaCom_Core#Available_licenses|IP Station License is required for ICX-AlphaCom]]. * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]3 KB (405 words) - 14:47, 22 April 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (206 words) - 12:51, 23 June 2023
- ...8 (i.e. license for 16 audio or video devices). In AlphaNet each connected ICX/AlphaCom requires its own license. ...0120, but excluding the stream licenses. 1190110120 must be present in the system before this license can be purchased.5 KB (549 words) - 14:01, 15 February 2024
- ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: [[Category: ICX-AlphaCom Applications]]775 bytes (106 words) - 11:34, 8 July 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (336 words) - 14:44, 29 January 2024
- ==ICX-AlphaCom Mode== ...is by default set as input. The input is programmed in Edge Controller -> System Configuration -> Direct Access Key (DAK) and Buttons and Inputs.3 KB (528 words) - 16:01, 10 May 2023
- ...[Exchange_%26_System_%28AlphaPro%29#Calls_and_Options|Exchange & System -> System -> Calls and Options]]), the Group Hunt can be programmed either to: [[Category: ICX-AlphaCom features]]2 KB (253 words) - 09:22, 30 June 2022
- ==ICX-AlphaCom Mode== ...is by default set as input. The input is programmed in Edge Controller -> System Configuration -> Direct Access Key (DAK) and Buttons and Inputs.3 KB (522 words) - 14:46, 10 February 2022
- ==Alphacom - ICX Mode== ...is by default set as input. The input is programmed in Edge Controller -> System Configuration -> Direct Access Key (DAK) and Buttons and Inputs.3 KB (548 words) - 12:51, 5 October 2023
- ...iated to VS-Operator receives a Call Request, an event is triggered in the ICX-AlphaCom. This event can send a data command to the VS-Operator, which can * In VS-Operator, System Configuration, select '''Filter sets''' > '''Add''' > '''Station''', and en8 KB (1,132 words) - 10:55, 29 June 2023
- * Make screenshots of AlphaWeb System Configuration pages: * Upgrade the ICX to the latest version856 bytes (121 words) - 10:19, 25 September 2020
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (216 words) - 12:52, 28 November 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (216 words) - 12:52, 28 November 2023
- * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]2 KB (258 words) - 14:18, 12 February 2024
- *People on the move wanting access to the ICX-AlphaCom services via their laptop * [[Licenses_for_ICX-500_and_ICX-AlphaCom_Core|SoftClient License (ICX-AlphaCom): 1002600300 - ILS-SC]]3 KB (378 words) - 08:19, 5 April 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (230 words) - 15:47, 8 September 2023
- {{I}} This article lists licenses available for ICX-500 and ICX-AlphaCom Core. All licenses can be stacked. # When Zenitel receives an order for ICX licenses, a '''Product Key''' will be sent by e-mail in return11 KB (1,604 words) - 12:28, 16 February 2024
- The ICX and AlphaCom systems can be interfaced to American Dynamics victor. ...Dynamics (Tyco), is based on EDI/EDO and event handler programming in the ICX/AlphaCom. On the victor side the integration is through the General Purpose9 KB (1,497 words) - 09:04, 16 August 2022
- ...otline Station - 1008070010|Turbine based]] IP Hotline station, used in '''ICX-AlphaCom''' mode. ...Board. An event must be created that reports correct handset status to the ICX-AlphaCom.4 KB (621 words) - 14:17, 12 February 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (268 words) - 13:30, 26 June 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (239 words) - 09:54, 16 August 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (230 words) - 12:52, 28 November 2023
- {{note|Note: This article relates to the integration between OnGuard and ICX-AlphaCom, or AlphaCom with software version 13.1.3.3 or newer. For older Al ...figure ICX and AlphaCom XE as a communication platform from within OnGuard System Administration.15 KB (2,238 words) - 10:20, 24 October 2023
- ...e which connects Feenics with a locally deployed Zenitel system. Multiple ICX-AlphaCom exchanges can be combined and incorporated into Feenics, providing ...alarm and alert notifications which are generated from within the Feenics system, allowing for immediate notification if a station becomes disconnected or t14 KB (2,263 words) - 10:03, 12 May 2023
- ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: [[Category: ICX-AlphaCom Applications]]873 bytes (122 words) - 11:35, 8 July 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (223 words) - 12:50, 28 November 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (223 words) - 12:50, 28 November 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (217 words) - 12:46, 28 November 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (217 words) - 12:38, 28 November 2023
- ...s the minimum configuration required for IP Stations to operate with an '''ICX-AlphaCom''' or '''AlphaCom XE''' server. The IP Stations are configured thr * [[Getting Started (ICX-AlphaCom)|Getting Started with ICX-AlphaCom]]6 KB (951 words) - 11:32, 23 June 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (217 words) - 12:47, 28 November 2023
- ...multiple zone selection and only audio line from ICX-system to the Vipedia system an IP-LCM is used. This article will describe three use cases with their ne When you call a group call number in the ICX-AlphaCom a relay on the IP-LCM is activated. This in turn will set up a fix9 KB (1,523 words) - 13:15, 17 November 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (244 words) - 12:27, 29 January 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (224 words) - 12:50, 28 November 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (245 words) - 09:48, 16 August 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (245 words) - 09:48, 16 August 2022
- When integrating Vipedia PAVA and an ICX-500 system it can be useful to have an indication of the status of the PAVA in the con The IP-LCM and CRM-V are registered to an ICX-5006 KB (928 words) - 12:23, 17 November 2023
- ...ro: [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Exchange & System > System > Calls and Options]] [[Category: ICX-AlphaCom features]]2 KB (257 words) - 15:16, 3 June 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (245 words) - 09:47, 16 August 2022
- '''VS-Operator''' is a PC-based system management package for the ICX-AlphaCom Audio Server. It shows the status of intercom devices using maps a *Get a quick overview of the system status – support for multiple monitors2 KB (294 words) - 10:36, 29 June 2023
- Enter the IP Address of your ICX-AlphaCom or AlphaCom server. In the AlphaCom inbuilt webserver, AlphaWeb, navigate to '''System Configuration -> Logging'''. Click '''<u><span style="color: Blue">Edit</sp4 KB (591 words) - 10:00, 16 August 2022
- ...Schneider Access Expert with a locally deployed Zenitel system. Multiple ICX-AlphaCom exchanges can be combined and incorporated into Schneider Access E ...notifications which are generated from within the Schneider Access Expert system, allowing for immediate notification if a station becomes disconnected or t15 KB (2,407 words) - 09:00, 16 August 2022
- ...lect [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Exchange & System, System, Calls and Options. '''Hotline Call Delay''']]. [[Category: ICX-AlphaCom features]]2 KB (328 words) - 09:58, 24 May 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (225 words) - 12:38, 28 November 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (230 words) - 12:47, 28 November 2023
- ...m AlphaPro software version 12.1.3.0, AlphaPro supports communication with ICX-AlphaCom via HTTPS. To enable this: *Go to '''Exchange & System'''3 KB (524 words) - 11:40, 25 March 2020
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (230 words) - 12:46, 28 November 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (230 words) - 12:46, 28 November 2023
- ...available in the IP settings can be found here: [[Station Web Interface - ICX-AlphaCom mode]] *ICX-AlphaCom IP address6 KB (954 words) - 15:15, 28 January 2022
- The link is actualized on the basis of local intercom server ICX-500/ICX-Core to AEOS, without the inclusion of AlphaNet. ...ersation (ICX-AlphaCom to AEOS) after providing the “open door” command in ICX-AlphaCom and playing a prerecorded audio message on the intercom when the d12 KB (1,764 words) - 13:04, 19 March 2024
- {{I}}[[Image:ICX-510 gateway.PNG|thumb|500px|The ICX-510 Gateway]] *'''ICX-510-IA Gateway'''. Item no: 1002000110, available as from January 2024.9 KB (1,438 words) - 11:28, 25 January 2024
- ...describes the network guidelines of the [[:Category:ICX-AlphaCom Platform|ICX-AlphaCom]] and [[:Category:AlphaCom XE|AlphaCom XE]] platforms. ==The ICX-AlphaCom and AlphaCom XE servers==6 KB (905 words) - 10:42, 24 January 2024
- * Tamper Alarm (ICX-AlphaCom mode) How to configure the station, depends on the mode of operation (ICX-AlphaCom, IC-Edge or SIP mode).5 KB (848 words) - 16:01, 7 September 2023
- *To configure the Input select '''Edge Controller''' > '''System Configuration''' > '''Direct Access Keys'''. <br> === Configuration in ICX-AlphaCom ===3 KB (371 words) - 10:21, 24 October 2023
- In AlphaPro, select '''Exchange & System''' > '''Events''', and '''Insert''' an event with the following properties: [[Category: ICX-AlphaCom Applications]]1 KB (160 words) - 14:30, 31 May 2022
- ...e:ITSV-1-AlphaCom.png|thumb|right|500px|ITSV-1 IP Phone in ICX or AlphaCom system]] ...set up the '''ITSV-1''' Video Intercom to operate in a '''ICX or AlphaCom system'''. The ITSV can be used for audio only, or it can also be used to show the13 KB (2,014 words) - 15:10, 16 March 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (322 words) - 09:48, 16 August 2022
- This article describes how substations in the ICX-AlphaCom can be configured to call external telephone number(s). {{Note|The ICX-AlphaCom and SIP Gateway must be configured to use '''One Stage''' (Enbloc)9 KB (1,398 words) - 12:28, 24 February 2023
- ...tel IP device, to which the door magnet (or an input in the access control system) is connected. [[Category: ICX-AlphaCom features]]1 KB (212 words) - 11:13, 24 October 2023
- ...al settings under [[Exchange_%26_System_(AlphaPro)#Timers|Exchange&System->System->Timers]]. Default is 11 seconds: [[Category:ICX-AlphaCom Applications]]2 KB (352 words) - 13:56, 31 May 2022
- = CCURE 9000 ICX-AlphaCom integration = This did not affect a stand-alone configurations (SAS only) system.1 KB (150 words) - 08:16, 4 August 2020
- ...e screen: '''Operator station is not defined correctly, please contact the system administrator'''.1 KB (213 words) - 10:49, 24 October 2023
- The user always dials a directory number when using the ICX-AlphaCom. The ICX-AlphaCom looks up the directory number in the directory number table, where The feature number tells the ICX-AlphaCom which major service the user wants. In addition, many features hav6 KB (1,019 words) - 15:43, 20 May 2022
- ...ere are several Call Requests at the same time, they will be queued in the ICX-AlphaCom and handled one by one. The macro [[%tin|%tin (Trunk In Use)]] is * ICX-AlphaCom: any5 KB (892 words) - 12:23, 23 February 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (281 words) - 16:08, 23 June 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (280 words) - 16:09, 23 June 2023
- [[File:ITSV-2 ICX.png|thumb|right|500px|ITSV-2 Phone in ICX or AlphaCom system]] ...set up the '''ITSV-2''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for audio only, or it can also be used to show the15 KB (2,319 words) - 13:00, 17 August 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (292 words) - 14:51, 29 January 2024
- Previous Release - [[ICX 1.0.3.X - Release Notes]] Next Release - [[ICX 1.2.3.X - Release Notes]]10 KB (1,462 words) - 05:09, 8 March 2022
- ...minutes of speech can be recorded from each individual station. The total system storage capacity for recall is approx. 40 minutes. ...simultaneous group calls can be disabled in AlphaPro, Exchange & System > System > Calls and Options: Simultanous Group Calls. If disabled only one group ca5 KB (811 words) - 20:09, 27 September 2023
- ...SV-4 ICX.png|thumb|right|500px|ITSV-4 Phone in ICX-AlphaCom or AlphaCom XE system]] ...set up the '''ITSV-4''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for audio only, or it can also be used to show the15 KB (2,349 words) - 15:28, 6 November 2023
- Compared to the Call Request feature the Ringing Group system has the following differences: One can upload wav files to the ICX-AlphaCom server, and use customized ringing tone for different ringing grou5 KB (796 words) - 09:22, 30 June 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (286 words) - 16:09, 23 June 2023
- ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event:2 KB (320 words) - 11:22, 8 July 2022
- ...SV-5 ICX.png|thumb|right|500px|ITSV-5 Phone in ICX-AlphaCom or AlphaCom XE system]] ...''ITSV-5''' Video Intercom to operate in an '''ICX-AlphaCom or AlphaCom XE system'''. The ITSV can be used for audio only, or it can also be used to show the15 KB (2,352 words) - 15:28, 6 November 2023
- ...:Mobile Radio TKIE.png|thumb|700px|Interface to non-selective mobile radio system using TKIE kit]] The ICX-AlphaCom can be interfaced to non-selective mobile radio systems via a Turb6 KB (869 words) - 11:26, 24 May 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (294 words) - 16:09, 23 June 2023
- ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events: [[Category: ICX-AlphaCom Applications]]1 KB (188 words) - 11:32, 8 July 2022
- [[File:ITSV-3 ICX.png|thumb|right|500px|ITSV-3 Phone in ICX or AlphaCom system]] ...set up the '''ITSV-3''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for audio only, or it can also be used to show the16 KB (2,396 words) - 13:00, 17 August 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (305 words) - 15:22, 23 June 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (308 words) - 14:50, 29 January 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (312 words) - 12:22, 23 June 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]3 KB (313 words) - 14:26, 31 January 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]3 KB (315 words) - 14:21, 31 January 2024
- [[File:ICX and stations.png|thumb|400px|ICX-AlphaCom Intercom System]] ...through the web interface of Zenitel IP Stations when operating with an '''ICX-AlphaCom''' or '''AlphaCom XE''' server.9 KB (1,413 words) - 13:26, 12 January 2024
- ...w to set up the '''Akuvox R29S''' to operate in a '''ICX''' or '''AlphaCom system'''. The Akuvox R29S can be used for audio only, or it can also send the vid ...29S requires a [[Licenses#SIP_station_license|SIP Station license]] in the ICX-AlphaCom server.11 KB (1,727 words) - 12:05, 23 February 2023
- In AlphaPro, go to Exchange & System, System, Events and insert an event with UDP 8 (any station) as owner, event type 1 [[Category: ICX-AlphaCom Applications]]2 KB (329 words) - 14:18, 31 May 2022
- <td style='background-color:#efefef;'>Siemens Sivelliance - ICX-AlphaCom Integration</td> The interface between ICX-AlphaCom and Siemens Sivelliance VMS is through an [https://alpha.zenitel.c14 KB (2,080 words) - 13:42, 4 December 2023
- #REDIRECT [[Milestone XProtect - ICX-AlphaCom Integration]] The interface between AlphaCom, ICX and Milestone XProtect VMS is through an integration module which is availa18 KB (2,900 words) - 08:51, 16 August 2022
- ...r can be used together with a [[Redundant Servers - ICX-AlphaCom|redundant system]], communicating with the Operational IP address. It can provide graphical Here is a description on how to set up monitoring so the ICX-AlphaCom statuses can be viewed in VSOP.10 KB (1,610 words) - 15:55, 8 November 2023
- ...lugin for integration with Milestone Xprotect go to [[Milestone XProtect - ICX-AlphaCom Integration]]}} The interface between AlphaCom, ICX and Milestone XProtect VMS is through an integration module which is availa18 KB (2,918 words) - 04:50, 23 January 2024
- <td style='background-color:#efefef;'>MOBOTIX HUB - ICX-AlphaCom Integration</td> The interface between ICX-AlphaCom and MOBOTIX HUB VMS is through an [https://alpha.zenitel.com/downl14 KB (2,096 words) - 13:47, 15 January 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]2 KB (325 words) - 12:22, 23 June 2023
- Alternative solution: [[IP Telephony Service (ICX-AlphaCom)]] ...tup of the GSM gateway MV-370 (Mobile VoIP) for communication with the ICX system or the AlphaCom.12 KB (1,892 words) - 15:14, 16 April 2024
- This article describes how to configure redundant ICX-AlphaCom servers. For redundancy using AlphaCom XE servers, see [[Redundant <td style='background-color:#efefef;'>Redundant Servers - ICX-AlphaCom</td>19 KB (2,929 words) - 09:31, 1 August 2023
- ...ks up sound according to the settings in VAD, it will trigger DAK5. In the ICX-AlphaCom [[Event Handler]] there is an [[Station Input or Station DAK key ( ...turn on when sound detection is enabled. Information will be sent to the [[System log]] whenever a staff station enable or disable the Sound Detection.5 KB (815 words) - 14:02, 16 November 2023
- <td style="display: block; vertical-align: bottom;">[[Image:Milestone ICX-AlphaCom.png|400px]]</td> <td style='background-color:#efefef;'>Milestone XProtect - ICX-AlphaCom Integration</td>15 KB (2,257 words) - 13:06, 29 April 2024
- # Set '''Station Mode''' = '''ICX-AlphaCom''' # Enter the '''ICX-AlphaCom IP-address'''4 KB (584 words) - 10:35, 22 April 2024
- ...[[IP Heavy Duty Station V2|IP Heavy Duty Stations (Version 2)]] used in '''ICX-AlphaCom''' mode. ...immediately. To change the delay time, select '''Exchange & System''', '''System''', '''Calls and Options'''.5 KB (718 words) - 09:30, 20 September 2023
- In AlphaPro select '''Exchange & System''' > '''Serial Ports''', and select the EDIO port to configure. ...password alphaadmin. Replace the "Host" field with the IP Address of your ICX-AlphaCom.4 KB (557 words) - 00:56, 26 March 2024
- ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: [[Category:ICX-AlphaCom Applications]]1 KB (194 words) - 11:14, 8 July 2022
- ...ber_Translation|ICX-Web]] or [[AlphaWeb#SIP_Settings|AlphaWeb]], in the '''System Configuration''' > '''SIP settings''' menu, one can upload a CSV file, whic [[Category: ICX-AlphaCom - SIP Integration]]3 KB (496 words) - 12:17, 24 February 2023
- Up to 254 ICX-AlphaCom servers can be interconnected in AlphaNet. One server can have up *Click on [[Exchange_%26_System_(AlphaPro)#NetRouting|Exchange & System > Net Routing]] > Insert11 KB (1,662 words) - 07:55, 5 July 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]3 KB (344 words) - 12:22, 29 January 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]3 KB (345 words) - 12:21, 29 January 2024
- '''Description:''' AlphaPro is the programming tool for the ICX and AlphaCom server <br> '''Description:''' AlphaPro is the programming tool for the ICX and AlphaCom server <br>6 KB (847 words) - 05:32, 8 March 2022
- * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]2 KB (201 words) - 09:20, 16 August 2022
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]3 KB (344 words) - 12:17, 29 January 2024
- The interface between AlphaCom, ICX and IC-EDGE and Genetec Security Center is through an integration module wh *that Security Center is operational, with all to the system connected cameras configured24 KB (3,826 words) - 15:45, 22 November 2023
- ...viaMV370.PNG|thumb|500px|right|Application example: Sending line errors in ICX-AlphaCom as SMS message]] This article describes how information can be sent from the ICX-AlphaCom (or AlphaCom XE) to a mobile phone as a SMS message. This could fo13 KB (1,988 words) - 12:08, 23 February 2023
- * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]2 KB (214 words) - 09:21, 16 August 2022
- * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]2 KB (211 words) - 11:43, 21 November 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]3 KB (379 words) - 15:12, 29 January 2024
- Use the event handler (Exhcange&System->Events) to create this event: [[Category: ICX-AlphaCom Applications]]1 KB (240 words) - 16:20, 31 May 2022
- ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events: [[Category: ICX-AlphaCom Applications]]2 KB (250 words) - 13:48, 14 December 2023
- [[Image:Audio Program ICX.PNG|thumb|700px|Audio Program distribution]] The ICX-AlphaCom system supports distribution of '''Audio Programs'''. There must be an external au13 KB (1,945 words) - 09:31, 30 June 2022
- ICX-AlphaCom, or AlphaCom XE with AMC-IP board hardware version 5 or 6 ([[AMC-I Log on to AlphaWeb, '''System Configuration''' > '''Messaging''':3 KB (433 words) - 14:34, 23 January 2024
- *Previous Release - [[ICX 1.1.3.X - Release Notes]] *Next Release - [[ICX 1.3.3.X - Release Notes]]9 KB (1,335 words) - 11:59, 21 February 2024
- PACOM GMS (Graphical Management System) is a multi-site security management platform, providing integration betwee ...tories of the PACOM GMS system describing how to install and configure the system.10 KB (1,382 words) - 08:54, 16 August 2022
- *that the Milestone XProtect VMS is operational, with all the system connected cameras configured Zenitel devices can be integrated into the Milestone XProtect system using their ONVIF capabilities and supplemented with the Zenitel Call Handl14 KB (2,203 words) - 15:14, 22 May 2023
- ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: [[Category:ICX-AlphaCom Applications]]2 KB (290 words) - 10:54, 5 May 2023
- ...lugin for integration with Milestone Xprotect go to [[Milestone XProtect - ICX-AlphaCom Integration]]}} *that the Milestone XProtect VMS is operational, with all the system connected cameras configured22 KB (3,426 words) - 15:09, 25 May 2023
- ...ses#SIP_station_license|"SIP station" license]]. In [[AlphaWeb]], go to '''System Configuration''' -> '''Licensing''', and Insert the license key containing ...led for the ethernet port used by the SIP users. In [[AlphaWeb]], go to '''System Configuration''' -> '''Filters''', and enable the UDP ports for SIP (5060)10 KB (1,521 words) - 12:00, 27 February 2023
- ...atest plugin for integration with Milestone Xprotect go to [[Mobotix Hub - ICX-AlphaCom Integration]]}} *that MOBOTIX HUB is operational, with all the system connected cameras configured21 KB (3,311 words) - 15:46, 25 May 2023
- *that the Milestone XProtect VMS is operational, with all to the system connected cameras configured ...e used for changing system type in which case you press “Load” – makes the system change – and press “Apply”.12 KB (1,868 words) - 08:48, 16 August 2022
- * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]2 KB (243 words) - 09:24, 16 August 2022
- ...(Zenitel) and Controlling Software (Building Management or Access Control System) The Manufacturer of the Field Equipment (Zenitel ICX-AlphaCom or AlphaCom XE) delivers an OPC Server Application. The communica9 KB (1,622 words) - 02:39, 9 December 2022
- * [[Milestone XProtect - ICX-AlphaCom Integration]] ...art of Milestone XProtect VMS. This article describes how to integrate the ICX/AlphaCom with the [http://www.milestonesys.com/ Milestone] XProtect Profess20 KB (2,911 words) - 08:51, 16 August 2022
- * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]2 KB (260 words) - 09:25, 16 August 2022
- *that the Milestone XProtect VMS is operational, with all to the system connected cameras configured ...e used for changing system type in which case you press “Load” – makes the system change – and press “Apply”.12 KB (1,892 words) - 04:49, 23 January 2024
- ...digits dialed during the conversation will not trigger any feature in the ICX-AlphaCom, but the digits will be reported in the Event Handler, event 25. ...at the station is already configured and operational with the ICX-AlphaCom system. What follows are the changes needed to allow relay and I/O functions.10 KB (1,634 words) - 16:21, 23 June 2023
- The ICX or AlphaCom system communicate with AMAG Symmetry via the MPC-protocol. *[http://www.amag.com AMAG™ Access Control and Security Management System]21 KB (3,404 words) - 09:12, 8 April 2024
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]4 KB (632 words) - 12:15, 24 October 2023
- * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]2 KB (219 words) - 13:31, 26 June 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]4 KB (640 words) - 12:15, 24 October 2023
- * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]2 KB (236 words) - 14:04, 2 May 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]4 KB (638 words) - 12:15, 24 October 2023
- *that MOBOTIX HUB is operational, with all the system connected cameras configured ...recognized in MOBOTIX HUB as ONVIF compatible devices and are added to the system in the same way.14 KB (2,187 words) - 15:45, 25 May 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]4 KB (660 words) - 12:15, 24 October 2023
- * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|Edge mode]]4 KB (652 words) - 12:14, 24 October 2023
- * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]2 KB (240 words) - 14:05, 2 May 2023
- In AlphaPro, select '''Exchange & System''' > '''Events''', and '''Insert''' a new event with the following properti [[Category: ICX-AlphaCom Applications]]2 KB (294 words) - 14:16, 31 May 2022
- ...for PTT and audio from a handheld microphone) or can be controlled by the system (e.g. audio input for background music). *[[ENA Amplifier - Basic configuration (AlphaCom mode)|Getting started (ICX-AlphaCom mode)]]3 KB (513 words) - 09:52, 16 August 2022
- ...URE 9000 can be integrated with the ICX-AlphaCom system or the AlphaCom XE system. ...with setup and operation of C-Cure 9000. Only points which are specific to ICX/AlphaCom and to its connected intercom stations are described.25 KB (3,866 words) - 15:28, 27 March 2023
- ...A2100-AC (only SIP mode and ICX AlphaCom mode), ENA2200-AC2, ENA2400-AC2 (ICX AlphaCom mode) and ENA2060-DC1 (only in SIP mode) === MTN-3905 Triggering relay via ONVIF in ICX-AlphaCom mode fixed===6 KB (1,015 words) - 14:14, 1 February 2023
- ...APTION ||align=center| Warning || Triggers on "custom parameter" send from ICX-AlphaCom when Door Opening is activated ...need to log Door Opening, some additional configuration is required in the ICX-AlphaCom. One have to add a "custom parameter" command in the Door Opening5 KB (796 words) - 13:43, 8 November 2023
- *[[IP Station Configuration - ICX-AlphaCom mode]] *[[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]2 KB (250 words) - 14:06, 2 May 2023
- '''ICX-AlphaCom Mode''': * Use the [[AlphaPro]] tool, and go to '''Exchange & System''' > '''RCO'''2 KB (277 words) - 14:41, 27 June 2023
- ...bes how you connect intercom audio calls to Microsoft Teams, by connecting ICX-Alphacom to the Microsoft Certified Audiocodes Mediant 800 SBC solution. .../output) from the Teams client, using the dialpad ( (by default digit 6 in ICX-AlphaCom triggers the relay)12 KB (1,927 words) - 09:47, 16 February 2023
- ...are used to provide various messaging services and PA broadcast in the '''ICX-AlphaCom''' and the '''AlphaCom XE'''. The messages are stored in flash mem * In AlphaWeb go to '''System Maintenance''' > '''System Upgrade'''12 KB (1,790 words) - 14:31, 23 January 2024
- **Configure a network of AlphaCom or ICX servers [[AlphaNet]]. ...t''' button, and navigate down to '''Zenitel'''. Select '''Launch Sentinel System Driver Installer'''4 KB (532 words) - 00:28, 18 January 2021
- =System requirements= * ICX-AlphaCom: any8 KB (1,320 words) - 14:46, 31 May 2022
- [[File:ICX Web NodeInfo.PNG|right|750px|thumb|The web interface of the ICX-500 Gateway]] This article describes the web interface of the ICX-500 Gateway.35 KB (5,405 words) - 10:37, 22 February 2024
- In AlphaPro, select '''Exchange & System''' - > '''Events''', and '''Insert''' two events with the following propert [[Category:ICX-AlphaCom Applications]]2 KB (336 words) - 08:04, 1 June 2022
- This article describes how the ICX-AlphaCom system can be configured to control call setup between pairs of stations, e.g. use The application is using the [[Duplex Conference]] feature of the ICX-AlphaCom. There are 20 conference channels, default numbers are 8301-8320.11 KB (1,810 words) - 11:53, 10 February 2023
- ...haCom mode only)''' - If enabled, Relay/Output can be controlled from both ICX-AlphaCom server and through ONVIF protocol so the user needs to pay attenti ...on pressed on a station is reported as Digital Input to a Video Management System.40 KB (5,470 words) - 17:18, 27 November 2023
- * [[Milestone XProtect - ICX-AlphaCom Integration]] ...art of Milestone XProtect VMS. This article describes how to integrate the ICX or AlphaCom with the [http://www.milestonesys.com/ Milestone] XProtect Expe23 KB (3,435 words) - 08:51, 16 August 2022
- ...A2060-DC1''' (only in SIP mode) and '''ENA2200-AC2''' & '''ENA2400-AC2''' (ICX-AlphaCom mode only). '''Compatibility: Pulse to IC-EDGE System'''<br>9 KB (1,339 words) - 16:17, 7 October 2022
- ...atus information. It is not possible to use Modbus TCP to send commands to ICX-AlphaCom.}} ==ICX-AlphaCom and the Modbus TCP protocol==8 KB (1,365 words) - 11:11, 4 December 2023
- * Asterisk Phone System * 3CX Phone System4 KB (635 words) - 12:11, 24 February 2023
- ...flag in AlphaPro that needs to be set. Go to '''Exchange & System''' > '''System''' > '''VoIP''', and enable the flag as shown below (this flag is available ** Necessary recourses are seized during setup in an AlphaNet system.10 KB (1,584 words) - 12:55, 31 May 2023
- * [[IP Station Configuration - ICX-AlphaCom mode]] * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]2 KB (301 words) - 12:51, 28 November 2023
- * The ICX-AlphaCom (and AlphaCom XE) supports up to 500 logical RCOs. The mapping of RCOs is done from AlphaPro, Exchange & System -> [[Exchange_%26_System_%28AlphaPro%29#RCO|RCO window]] where the logical9 KB (1,393 words) - 14:45, 3 November 2023
- ...llation and operation between Zenitel’s [[:category:IC-EDGE System|IC-EDGE System]] and LenelS2 OnGuard. ...tween LenelS2 OnGuard and the ICX-AlphaCom system, see [[LenelS2 OnGuard - ICX-AlphaCom Integration|here]].12 KB (1,878 words) - 16:12, 15 August 2022
- * ICX: Any version ...AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press '''Insert''' and create the following events (Simply '''4 KB (649 words) - 11:13, 8 July 2022
- ICX-AlphaCom and AlphaCom XE use [[IP Multicast]] for transmitting Group Audio {{obs|If some IP stations are on a different subnets than the ICX/AlphaCom, attention must be paid to handle the multicast for Group Audio!}}10 KB (1,718 words) - 16:14, 25 October 2023
- ...on the same device. All requests from Zenitel devices are received via the ICX-AlphaCom node. The RTP media flows directly between the RtpDaemon and the S SIP interfacing in ICX-AlphaCom is configured in AlphaPro.23 KB (3,518 words) - 13:45, 23 February 2023
- ...col for easy interoperability with telephone systems. Via SIP Trunking the ICX-AlphaCom can be interfaced to: [[File:SIP Trunk ICX.png|thumb|500px|SIP Trunking with ICX-AlphaCom or AlphaCom XE]]34 KB (5,437 words) - 16:32, 25 October 2023
- This article describes how to configure SIP Trunk integration between ICX-AlphaCom (and AlphaCom XE) and Cisco Call Manager 10.0, 11.0 or 11.5. *ICX-AlphaCom or AlphaCom XE server9 KB (1,392 words) - 13:26, 21 June 2023
- ...(SIP mode and ICX AlphaCom mode), '''ENA2200-AC2, ENA2400-AC2''' (SIP and ICX AlphaCom mode) and '''ENA2060-DC1''' (only in SIP mode) ===MTN-1073 Group call fails if system previously configured with ZAP===15 KB (2,383 words) - 10:13, 2 May 2024
- First, they need to be configured to call each other in the ICX, triggered by DAK9. Both are set to the same UDP group, and both have the n ...to cancel the call, or to initiate recording if that option is used in the system:10 KB (1,666 words) - 10:50, 24 October 2023
- ...tem can be equipped with dual AMC-IP cards in order to reduce and minimize system downtime.<br> * [[Redundant Servers - ICX-AlphaCom]]8 KB (1,360 words) - 16:35, 28 June 2022
- The VS-OPC Classic is used with the ICX-AlphaCom and the AlphaCom servers. [[Image:OPC Classic Block.PNG|thumb|500px|OPC Classic with ICX-500 Server]]20 KB (3,196 words) - 11:00, 24 October 2023
- *'''802.1x mode''' - Enables and selects the 802.1x mode for the phone system. The supported 802.1x modes are: EAP-MD5, EAP-TLS, EAP-PEAP. The default se *'''802.1x mode''' - Enables and selects the 802.1x mode for the phone system. The supported 802.1x modes are: EAP-MD5, EAP-TLS, EAP-PEAP. The default se12 KB (1,742 words) - 10:36, 7 November 2023
- ...imple Link Layer. The following paragraphs give a short setup guide of the system, for more details please contact Advancis directly. In the ICX System the following license is required in order to enable the ACDP protocol: 10021 KB (3,279 words) - 14:45, 30 June 2023
- ...A2060-DC1''' (only in SIP mode) and '''ENA2200-AC2''' & '''ENA2400-AC2''' (ICX-AlphaCom mode only). ===MTN-1073 Group call fails if system previously configured with ZAP===6 KB (858 words) - 13:40, 21 November 2022
- {{AI}} [[File:ENA Amp block.png|thumb|800px|ICX-AlphaCom with ENA Amplifiers]] ...server. The ENA Amplifiers are configured through their web interface. The ICX-AlphaCom server is configured using the PC tool [[AlphaPro]].21 KB (3,026 words) - 15:36, 14 January 2022
- The '''TST console''' is a part of the ICX and AlphaCom Software. It is primary used as a debugging tool for software ...seful for troubleshooting. The TST console also gives direct access to the system memory, making it possible to modify parameters not available from the [[Al8 KB (1,306 words) - 12:09, 27 August 2019
- ...ge Controller is acting as a server for the other intercom stations in the system. Most Zenitel IP devices can act as an Edge Controller, see [[Edge Controll ...Controller|full list here]]. There can only be one [[Edge Controller]] per system and it must be assigned a static IP address.13 KB (2,186 words) - 15:15, 29 August 2023
- ...t be replaced by the actual physical number of the Control Room station. [[System Status (Event Type)|Event 27/65 - ON]] can be used to set this flag. Exampl [[Category: ICX-AlphaCom features]]3 KB (409 words) - 16:28, 20 May 2022
- *[[IP Station Configuration - ICX-AlphaCom mode]] *[[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]3 KB (361 words) - 14:05, 2 May 2023
- * '''ICX-AlphaCom mode''': ''Advanced ICX-AlphaCom'' > ''Video Settings'' ...NVIF_Settings#Video_Intercoms|ONVIF]] profile S compliant Video Management System.6 KB (892 words) - 11:26, 24 January 2024
- [[File:ITSV-1 Edge system.png|thumb|right|500px|ITSV-1 unit in IC-EDGE System]] This article describes how to set up the '''ITSV-1''' unit in an '''IC-EDGE System'''.12 KB (1,807 words) - 12:23, 10 July 2020
- If there are multiple alarms at the same time, the system will put the calls in queue, and set up calls one by one to the telephone a ...ly if there is a free telephone line. If all available lines are busy, the system will retry every few seconds until a line is free. If there are several Cal15 KB (2,374 words) - 12:09, 24 February 2023
- ...ribes how to configure redundant AlphaCom XE servers. For redundancy using ICX-AlphaCom servers, see [[Redundant_Servers_-_ICX-AlphaCom]] * System level failures16 KB (2,500 words) - 17:08, 28 June 2022
- ...'''Exigo IP speakers'''. '''Exigo Network Amplifiers''' (only SIP mode and ICX- AlphaCom mode), and '''ENA-2060''' (only in SIP mode) '''Compatibility: Pulse to IC-EDGE System'''<br>6 KB (936 words) - 10:18, 23 June 2022
- ...onfigurable in [[Exchange_%26_System_(AlphaPro)#Timers|Exchange & System > System > Timers > Auto-Attendant Timeout]]. [[Category: ICX-AlphaCom features]]5 KB (641 words) - 14:59, 20 May 2022
- The Zenitel Device must be configured to register to the ICX-AlphaCom in the standard way. In addition the I/O's used with the MRBD must This is done from [[AlphaPro]]. In '''Exchange & System''' -> '''RCO''' select a free RCO.3 KB (482 words) - 16:23, 23 June 2023
- # It shall be possible to integrate a mobile radio system. The radio shall be able to talk into the conference when the squelsh signa In AlphaPro, [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange & System -> Events]], insert events with the following parameters:5 KB (837 words) - 14:35, 31 May 2022
- ...configure a '''Silent Alarm''' feature in an ICX-AlphaCom (or AlphaCom XE) system. There can be up to 100 Alarm Sender intercoms in one system. The alarm sender can be any Zenitel IP device, typically a12 KB (1,938 words) - 17:11, 4 January 2023
- In the '''Exchange & System''' -> '''Events''' insert a new event: In the '''Exchange & System''' -> '''Events''' create a new event which is triggered when the Clear Cod5 KB (832 words) - 14:10, 31 May 2022
- [[File:MiltiConf Overview.png|right|thumb|500px|MultiConference system]] The '''MultiConference''' is a feature in the ICX-AlphaCom and AlphaCom XE systems, that makes it possible for operators to l26 KB (3,767 words) - 16:29, 8 February 2023
- |[[Mobile_radio_interface|Mobile Radio system (ICX-AlphaCom)]] |[[Audio Program|Program Source (ICX-AlphaCom)]]9 KB (1,159 words) - 14:23, 24 October 2023
- ...', '''ENA2200''', '''ENA2400-AC/DC''', '''ENA2100-AC''' (only SIP mode and ICX- AlphaCom mode), and '''ENA2060-DC1''' (only in SIP mode) '''Compatibility: Pulse to IC-EDGE System'''<br>12 KB (1,908 words) - 12:53, 17 August 2022
- ...less if the RCO is triggered from the VSOP or from any other action in the system. ...change_%26_System_(AlphaPro)#RCO|A logical RCO is already defined]] in the ICX or AlphaCom using AlphaPro.4 KB (609 words) - 10:55, 29 June 2023
- ...m the web interface of the AlphaCom XE and ICX-AlphaCom; [[ICX_Web#Logging|System Configuration''' > '''Logging]].4 KB (463 words) - 09:42, 7 July 2022
- *Zenitel-Client ver. 1.6.3.1 - [[Zenitel Client|Soft Client]] for Edge system *Zenitel-Client ver. 1.6.3.1 - [[Zenitel Client|Soft Client]] for Edge system65 KB (8,739 words) - 10:02, 2 May 2024
- The Directory Number must be [[IP Station Configuration - ICX-AlphaCom mode|defined in the AlphaCom Server]] using the AlphaPro configura ...e from [[AlphaPro]]. Go to [[Exchange_%26_System_(AlphaPro)#RCO|Exchange & System > RCO]], and select from the listbox an unused logical RCO.4 KB (593 words) - 13:31, 14 December 2022
- ...A2100-AC (only SIP mode and ICX AlphaCom mode), ENA2200-AC2, ENA2400-AC2 (ICX AlphaCom mode) and ENA2060-DC1 (only in SIP mode) ===MTN-4229 HD audio for back ground music distribution in ICX-AlphaCom produced noise===8 KB (1,291 words) - 14:34, 6 February 2024
- ...licenses for the ICX-AlphaCom see this article: [[Licenses for ICX-500 and ICX-AlphaCom Core]] }} *Select '''System Configuration''' > '''Licensing'''16 KB (2,323 words) - 13:21, 18 September 2023
- ...A2100-AC (only SIP mode and ICX AlphaCom mode), ENA2200-AC2, ENA2400-AC2 (ICX AlphaCom mode) and ENA2060-DC1 (only in SIP mode) ...nd ONVIF” on both sender and receiver end (when not being an ONVIF enabled system). This can reduce end-to-end delay with 20-30 ms more.8 KB (1,250 words) - 10:36, 8 September 2023
- ...'''Exigo IP speakers'''. '''Exigo Network Amplifiers''' (only SIP mode and ICX- AlphaCom mode), and '''ENA-2060''' (only in SIP mode) '''Compatibility: Pulse to IC-EDGE System'''<br>17 KB (2,721 words) - 10:19, 23 June 2022
- ...aCom; only when there is a noticeable difference between ICX and AlphaCom, ICX will be referred to separately. The SDK name itself will remain VS-SDK for ...(if not all) aspects of what normally is expected from an integration with ICX. Users of the SDK are allowed to freely use parts of the sample source code21 KB (3,189 words) - 01:08, 11 October 2022
- ...d stations using [[Simplex Conference]] in an ICX-AlphaCom or AlphaCom XE system. The microphone on the monitored station will be activated without any conn4 KB (551 words) - 10:33, 8 June 2023
- ...server provides functions for system monitoring, system configuration, and system upgrade. ==System Monitoring==30 KB (4,635 words) - 09:19, 16 August 2022
- ...m Data Protocol]]) - A proprietary protocol used for communication between ICX-AlphaCom (or AlphaCom) servers, as well as for integration to 3rd party sys ...rd|AlphaCom Module Controller]]) - The main CPU card in an analog AlphaCom system27 KB (4,019 words) - 16:23, 5 January 2024
- During the conversation the system automatically switches the voice direction from one station to the other de ...t their intercom station, you have several possibilities, depending on the system configuration:<br>7 KB (1,137 words) - 15:39, 20 May 2022
- * [[Milestone XProtect - ICX-AlphaCom Integration]] ...rings can be sent from the AlphaCom to the Milestone IP Video surveillance system using the AlphaCom's [[EDO|EDO port]]. Using the [[Event Handler]], a few s15 KB (2,309 words) - 08:50, 16 August 2022
- ...ay, the Event Handler provides a powerful engineering tool for configuring system behavior to meet requirements from customers. '''Events''' are generated inside the ICX-AlphaCom software when interesting things happen. Events follows a fixed fo30 KB (4,403 words) - 15:01, 21 November 2023
- ...nd CRM stations. You can have several external Call Request numbers in the system. The priority level and display information depends on the settings in the ...ey several times, it is only registered once at the receiving station. The system registers duplication of neither Call Requests, Technical Alarms nor other12 KB (1,849 words) - 15:31, 20 May 2022
- ...io can be transmitted directly without delay, or it can be recorded by the ICX-AlphaCom and dispatched after having listened to the recording ([[recall]]) ...tomized_wav-files_from_AlphaWeb|uploaded via the AlphaCom web interface]] (System Configuration > Messaging). It must be uploaded as Message Group 30. The ID8 KB (1,320 words) - 13:43, 5 July 2022
- * DAK 1 (D1): '''Start/Pause key'''. Press D1 to start the scanning. The system will start to monitor in rotating order, 2.5 seconds (configurable) at each * ICX-AlphaCom server, or AlphaCom XE with firmware AMC 13.0.3.0 or later9 KB (1,426 words) - 17:54, 2 February 2023
- ...A2100-AC (only SIP mode and ICX AlphaCom mode), ENA2200-AC2, ENA2400-AC2 (ICX AlphaCom mode) and ENA2060-DC1 (only in SIP mode) ===MTN-1073 Group call fails if system previously configured with ZAP===9 KB (1,458 words) - 13:54, 24 May 2023
- ...Y_RESET]] || ||align=center|0x0039|| Simulates Chilly Reset sent from ICX-AlphaCom web interface ..._DISC ]] || align=center | || align=center | 0x007F || Log off from system debug console (TST)25 KB (3,680 words) - 15:24, 30 June 2022
- ...the '''LenelS2 OnGuard System''' with the [[:Category:AlphaCom_XE|AlphaCom system]]. The integration is using the MPC Data Protocol. ...are version older than 13.1.3.3. For a description of the integration with ICX-AlphaCom or AlphaCom with software version 13.1.3.3 or newer, please refer24 KB (3,745 words) - 16:18, 15 August 2022
- ...'''Exigo IP speakers'''. '''Exigo Network Amplifiers''' (only SIP mode and ICX- AlphaCom mode), and '''ENA-2060DC1''' (only in SIP mode) '''Compatibility: Pulse to IC-EDGE System'''<br>10 KB (1,600 words) - 10:18, 23 June 2022
- | [[LOG_STRING]] || align=center|LOG||align=center|0x0075||Output String to System Log ...align=center|ER||align=center|0x0067||Report an event to the event/action system28 KB (4,310 words) - 15:23, 30 June 2022
- ...''Exchange & System''' window you can inspect and modify a large number of system parameters. <br><br> ==Exchange and System - Main window==67 KB (10,588 words) - 14:04, 3 January 2024
- Configure the EDO port in '''Exchange & System''' > '''Serial ports''': [[Category: ICX-AlphaCom Applications]]8 KB (1,267 words) - 11:24, 9 February 2023
- ...f the line board ([[ASLT]] or [[ATLB-12]]), and in case of [[MultiModule]] system it is also determined by which [[module]] the line board is located. For [[ ...er. '''Module''' shows which of the 4 modules (65-68) in a [[MultiModule]] system, '''Pos''' shows the line card position (1-23), and '''Line''' shows which46 KB (7,340 words) - 17:22, 19 February 2024
- === MTN-4007 Correction of IMT registration check for ICX-Alphacom stations=== ...eck feature was not giving correct information about registered status for ICX-Alphacom stations. This is now corrected.34 KB (5,067 words) - 15:15, 6 February 2024
- See also article [[IP Telephony Service (ICX-AlphaCom)]] This article describes the setup of the AlphaCom XE system and the AudioCodes MP-114/118 SIP Gateway, firmware version 6.2. The articl39 KB (5,908 words) - 15:59, 19 February 2024
- Provides a way of transferring value and string parameters from ICX or AlphaCom to VS-Operator. ...y different layout needs to be selected due to a critical event in another system.17 KB (2,737 words) - 11:58, 7 February 2023
- * A total of 32 users (in ICX-AlphaCom, 16 users in AlphaCom XE) can join the duplex conference feature a ...only low speaking mode using handsets, this can be achieved by setting the system wide nvram flag:19 KB (2,911 words) - 15:11, 1 March 2023
- ...me Between failures) figures try to give a measure of the reliability of a system. There are 2 ways in which MTBF figures can be obtained: | 1002000100||ICX-500||900000||388800||21250032 KB (3,831 words) - 12:21, 22 March 2024
- ...ll between IP stations failed when analogue stations were connected to the system=== ===MTN-3018 Added Multi-Webuser Support to Alphacom and ICX-Alphacom===23 KB (3,359 words) - 15:40, 4 May 2023